David Howells mentioned that he found this bit of code confusing, so
sprinkle in some comments to clarify.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
An error from break_lease is non-fatal, so we needn't destroy the
nfsd_file in that case. Just put the reference like we normally would
and return the error.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
test_bit returns bool, so we can just compare the result of that to the
key->gc value without the "!!".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since v4 files are expected to be long-lived, there's little value in
closing them out of the cache when there is conflicting access.
Change the comparator to also match the gc value in the key. Change both
of the current users of that key to set the gc value in the key to
"true".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If a file with the same name exists, the target is not run.
For example, the following command fails.
$ make O=build-arch bindeb-pkg
[ snip ]
sed: can't read modules.order: No such file or directory
make[6]: *** [../Makefile:1577: __modinst_pre] Error 2
make[5]: *** [../scripts/Makefile.package:150: intdeb-pkg] Error 2
make[4]: *** [../Makefile:1657: intdeb-pkg] Error 2
make[3]: *** [debian/rules:14: binary-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[2]: *** [../scripts/Makefile.package:139: bindeb-pkg] Error 2
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Currently, entering
$ make ARCH=sparc32 help
prints the archhelp text for sparc64.
["sparc32" is documented (Documentation/kbuild/kbuild.rst)
to be a recognized alias for 32-bit sparc.]
Instead of handling ARCH=sparc or ARCH=sparc32 or ARCH=sparc64,
just unify all SPARC archhelp text in one place.
Fixes: 5e53879008 ("sparc,sparc64: unify Makefile")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.
- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.
Signed-off-by: jasontao <jasontao@glenfly.com>
Signed-off-by: Reaper Li <reaperlioc@glenfly.com>
Link: https://lore.kernel.org/r/20230426013059.4329-1-reaperlioc@glenfly.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The X-Powers AXP313a is a PMIC used on some devices with the Allwinner
H616 or H313 SoC.
According to the datasheet, the DC/DC converter PWM frequency is fixed
(to 3 MHz), so disallow the property that lets us set this frequency
for the other PMICs.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230401001850.4988-2-andre.przywara@arm.com
(cherry picked from commit 2a9e8a1a7c4caadf690e5a77fe4162c5edab4a9c)
Signed-off-by: Lee Jones <lee@kernel.org>
These error paths need to call mutex_unlock(&priv->lock) before
returning. The lock is taken in rz_mtu3_lock_if_counter_is_valid().
Fixes: 25d21447d896 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/7b535d6b-6031-493a-84f6-82842089e637@kili.mountain
Document that the da9063 only provides under- *and* over-voltage
monitoring in one, and therefore requires both to be configured with the
same severity and value. Add an example for clarification.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-3-cc4dc698864c@skidata.com
Update the examples to reflect a future requirement for the generic
`channel` node name on ADC channel nodes, while conveying the board name
of the channel in a label instead.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230410202917.247666-5-marijn.suijten@somainline.org
Add RZ/G2L MTU3a counter driver. This IP supports the following
phase counting modes on MTU1 and MTU2 channels
1) 16-bit phase counting modes on MTU1 and MTU2 channels.
2) 32-bit phase counting mode by cascading MTU1 and MTU2 channels.
This patch adds 3 counter value channels.
count0: 16-bit phase counter value channel on MTU1
count1: 16-bit phase counter value channel on MTU2
count2: 32-bit phase counter value channel by cascading
MTU1 and MTU2 channels.
The external input phase clock pin for the counter value channels
are as follows:
count0: "MTCLKA-MTCLKB"
count1: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
count2: "MTCLKA-MTCLKB" or "MTCLKC-MTCLKD"
Use the sysfs variable "external_input_phase_clock_select" to select the
external input phase clock pin and "cascade_counts_enable" to enable/
disable cascading of channels.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-5-biju.das.jz@bp.renesas.com
This commit adds cascade_counts_enable and external_input_phase_
clock_select items to counter ABI file.
(e.g. for Renesas MTU3 hardware used for phase counting).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-4-biju.das.jz@bp.renesas.com
The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
the Renesas RZ/G2L family SoCs. It consists of eight 16-bit timer
channels and one 32-bit timer channel. It supports the following
functions
- Counter
- Timer
- PWM
The 8/16/32 bit registers are mixed in each channel.
Add MTU3a core driver for RZ/G2L SoC. The core driver shares the
clk and channel register access for the other child devices like
Counter, PWM and Clock event.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-3-biju.das.jz@bp.renesas.com
The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer
channels and one 32-bit timer channel. It supports the following
functions
- Counter
- Timer
- PWM
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330111632.169434-2-biju.das.jz@bp.renesas.com
This commit reapplies commit 601e6d48ee ("mfd: rsmu_i2c: Convert to
i2c's .probe_new()") which was accidently reverted by commit
1b3b1d6c27cc ("mfd: rsmu: Support 32-bit address space").
Without this change the driver fails to build in combination with commit
03c835f498 ("i2c: Switch .probe() to not take an id parameter") which
is contained in v6.3-rc2.
Fixes: 1b3b1d6c27cc ("mfd: rsmu: Support 32-bit address space")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230331070344.czphnnmvu2ojzo5l@pengutronix.de
Add Intel Meteor Lake PCH-S also called as Meteor Point-S LPSS PCI IDs.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330132618.4108665-1-jarkko.nikula@linux.intel.com
When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets
to call usb_put_dev() to decrease the refcount of dln2->usb_dev.
Fix this by adding usb_put_dev() in the error handling code of
dln2_probe().
Signed-off-by: Qiang Ning <qning0106@126.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com
Register AXP288_POWER_REASON is writable and needs to be written
to reset the reset- / power-on-reason bits.
Add it to the axp288 writable-ranges so that the extcon-axp288
driver can properly clear the reset- / power-on-reason bits.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230329205544.1051393-1-hdegoede@redhat.com
The syntax to disallow x-powers,drive-vbus-en,
x-powers,self-working-mode and x-powers,master-mode for certain variants
can be made simpler. Also this produces much nicer warning message when
the condition hits wrong DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230325114353.50293-1-krzysztof.kozlowski@linaro.org
We used to assume 0x2010xxxx address. Now that we need to access
0x2011xxxx address, we need to support read/write the whole 32-bit
address space.
Also defined RSMU_MAX_WRITE_COUNT and RSMU_MAX_READ_COUNT for readability
Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/MW5PR03MB693295AF31ABCAF6AE52EE74A08B9@MW5PR03MB6932.namprd03.prod.outlook.com
Add an 'nvram' pattern property and a reference to the corresponding
SDAM DT schema.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230320135710.1989-4-johan+linaro@kernel.org
This patch adds missing MODULE_DEVICE_TABLE definition
which generates correct modalias for automatic loading
of this driver when it is built as a module.
Fixes: 3f65555c41 ("mfd: arizona: Split of_match table into I2C and SPI versions")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230323134138.834369-1-ckeepax@opensource.cirrus.com
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org
Ocelot chips (VSC7511, VSC7512, VSC7513, VSC7514) don't support bulk read
operations over SPI.
Many SPI buses have hardware that can optimize consecutive reads.
Essentially an address is written to the chip, and if the SPI controller
continues to toggle the clock, subsequent register values are reported.
This can lead to significant optimizations, because the time between
"address is written to the chip" and "chip starts to report data" can often
take a fixed amount of time.
When support for Ocelot chips were added in commit f3e893626a ("mfd:
ocelot: Add support for the vsc7512 chip via spi") it was believed that
this optimization was supported. However it is not.
Most register transactions with the Ocelot chips are not done in bulk, so
this bug could go unnoticed. The one scenario where bulk register
operations _are_ performed is when polling port statistics counters, which
was added in commit d87b1c08f3 ("net: mscc: ocelot: use bulk reads for
stats").
Things get slightly more complicated here...
A bug was introduced in commit d4c3676507 ("net: mscc: ocelot: keep
ocelot_stat_layout by reg address, not offset") that broke the optimization
of bulk reads. This means that when Ethernet support for the VSC7512 chip
was added in commit 3d7316ac81 ("net: dsa: ocelot: add external ocelot
switch control") things were actually working "as expected".
The bulk read opmtimization was discovered, and fixed in commit
6acc72a43e ("net: mscc: ocelot: fix stats region batching") and the
timing optimizations for SPI were noticed. A bulk read went from ~14ms to
~2ms. But this timing improvement came at the cost of every register
reading zero due the fact that bulk reads don't work.
The read timings increase back to 13-14ms, but that's a price worth paying
in order to receive valid data. This is verified in a DSA setup (cpsw-new
switch tied to port 0 on the VSC7512, after having been running overnight)
Rx Octets: 16222055 # Counters from CPSW switch
Tx Octets: 12034702
Net Octets: 28256757
p00_rx_octets: 12034702 # Counters from Ocelot switch
p00_rx_frames_below_65_octets: 0
p00_rx_frames_65_to_127_octets: 88188
p00_rx_frames_128_to_255_octets: 13
p00_rx_frames_256_to_511_octets: 0
p00_rx_frames_512_to_1023_octets: 0
p00_rx_frames_over_1526_octets: 3306
p00_tx_octets: 16222055
Fixes: f3e893626a ("mfd: ocelot: Add support for the vsc7512 chip via spi")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322141130.2531256-1-colin.foster@in-advantage.com
Clang with W=1 reports:
drivers/mfd/omap-usb-tll.c:128:18: error: unused function
'usbtll_readb' [-Werror,-Wunused-function]
static inline u8 usbtll_readb(void __iomem *base, u32 reg)
^
This function is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322125803.2570968-1-trix@redhat.com
Clang with W=1 reports:
drivers/mfd/twl-core.c:654:30: error: unused function 'add_child' [-Werror,-Wunused-function]
static inline struct device *add_child(unsigned mod_no, const char *name,
^
add_numbered_child() and its only caller add_child() are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230322115838.2569414-1-trix@redhat.com
PMM8654au is the SPMI PMIC variant used on sa8775p-ride. Add a compatible
for it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230314183043.619997-5-brgl@bgdev.pl
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as a module.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230319124153.35294-1-git@apitzsch.eu
Add a compatible for PM2250, commonly found with QCM2290.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230315183819.3563704-1-konrad.dybcio@linaro.org
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).
drivers/mfd/atc260x-i2c.c:44:34: error: ‘atc260x_i2c_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230311111629.251830-2-krzysztof.kozlowski@linaro.org
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/mfd/atmel-smc.c:326:34: error: ‘atmel_smc_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230311111629.251830-1-krzysztof.kozlowski@linaro.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230310144712.1543449-1-robh@kernel.org
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230310144712.1543379-1-robh@kernel.org
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308194307.374789-1-nick.alcock@oracle.com
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Jeff Layton