Add document for IFLA_BRPORT enum so we can use it in
Documentation/networking/bridge.rst.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add document for IFLA_BR enum so we can use it in
Documentation/networking/bridge.rst.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support in netlink spec(netdev.yaml) for interrupt number
among the NAPI attributes. Add code generated from the spec.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147334210.5260.18178387869057516983.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support in netlink spec(netdev.yaml) for queue information.
Add code generated from the spec.
Note: The "queue-type" attribute takes values 0 and 1 for rx
and tx queue type respectively.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/170147330963.5260.2576294626647300472.stgit@anambiarhost.jf.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Walk the hashinfo->bhash2 table so that inet_diag can dump TCP sockets
that are bound but haven't yet called connect() or listen().
The code is inspired by the ->lhash2 loop. However there's no manual
test of the source port, since this kind of filtering is already
handled by inet_diag_bc_sk(). Also, a maximum of 16 sockets are dumped
at a time, to avoid running with bh disabled for too long.
There's no TCP state for bound but otherwise inactive sockets. Such
sockets normally map to TCP_CLOSE. However, "ss -l", which is supposed
to only dump listening sockets, actually requests the kernel to dump
sockets in either the TCP_LISTEN or TCP_CLOSE states. To avoid dumping
bound-only sockets with "ss -l", we therefore need to define a new
pseudo-state (TCP_BOUND_INACTIVE) that user space will be able to set
explicitly.
With an IPv4, an IPv6 and an IPv6-only socket, bound respectively to
40000, 64000, 60000, an updated version of iproute2 could work as
follow:
$ ss -t state bound-inactive
Recv-Q Send-Q Local Address:Port Peer Address:Port Process
0 0 0.0.0.0:40000 0.0.0.0:*
0 0 [::]:60000 [::]:*
0 0 *:64000 *:*
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/b3a84ae61e19c06806eea9c602b3b66e8f0cfc81.1701362867.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZWiCPAAKCRDbK58LschI
g4djAQC1FdqCRIFkhbiIRNHTgHjnfQShELQbd9ofJqzylLqmmgD+JI1E7D9SXagm
pIXQ26EGmq8/VcCT3VLncA8EsC76Gg4=
=Xowm
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3 ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the initial subflow has been removed, we cannot know without checking
other counters, e.g. ss -ti <filter> | grep -c tcp-ulp-mptcp or
getsockopt(SOL_MPTCP, MPTCP_FULL_INFO, ...) (or others except MPTCP_INFO
of course) and then check mptcp_subflow_data->num_subflows to get the
total amount of subflows.
This patch adds a new counter mptcpi_subflows_total in mptcpi_flags to
store the total amount of subflows, including the initial one. A new
helper __mptcp_has_initial_subflow() is added to check whether the
initial subflow has been removed or not. With this helper, we can then
compute the total amount of subflows from mptcp_info by doing something
like:
mptcpi_subflows_total = mptcpi_subflows +
__mptcp_has_initial_subflow(msk).
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/428
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-1-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For XDP_COPY mode, add a UMEM option XDP_UMEM_TX_SW_CSUM
to call skb_checksum_help in transmit path. Might be useful
to debugging issues with real hardware. I also use this mode
in the selftests.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-9-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change actually defines the (initial) metadata layout
that should be used by AF_XDP userspace (xsk_tx_metadata).
The first field is flags which requests appropriate offloads,
followed by the offload-specific fields. The supported per-device
offloads are exported via netlink (new xsk-flags).
The offloads themselves are still implemented in a bit of a
framework-y fashion that's left from my initial kfunc attempt.
I'm introducing new xsk_tx_metadata_ops which drivers are
supposed to implement. The drivers are also supposed
to call xsk_tx_metadata_request/xsk_tx_metadata_complete in
the right places. Since xsk_tx_metadata_{request,_complete}
are static inline, we don't incur any extra overhead doing
indirect calls.
The benefit of this scheme is as follows:
- keeps all metadata layout parsing away from driver code
- makes it easy to grep and see which drivers implement what
- don't need any extra flags to maintain to keep track of what
offloads are implemented; if the callback is implemented - the offload
is supported (used by netlink reporting code)
Two offloads are defined right now:
1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset
2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata
area upon completion (tx_timestamp field)
XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes
SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass
metadata pointer).
The struct is forward-compatible and can be extended in the future
by appending more fields.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For zerocopy mode, tx_desc->addr can point to an arbitrary offset
and carry some TX metadata in the headroom. For copy mode, there
is no way currently to populate skb metadata.
Introduce new tx_metadata_len umem config option that indicates how many
bytes to treat as metadata. Metadata bytes come prior to tx_desc address
(same as in RX case).
The size of the metadata has mostly the same constraints as XDP:
- less than 256 bytes
- 8-byte aligned (compared to 4-byte alignment on xdp, due to 8-byte
timestamp in the completion)
- non-zero
This data is not interpreted in any way right now.
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231127190319.1190813-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to get uprobe_link details through bpf_link_info
interface.
Adding new struct uprobe_multi to struct bpf_link_info to carry
the uprobe_multi link details.
The uprobe_multi.count is passed from user space to denote size
of array fields (offsets/ref_ctr_offsets/cookies). The actual
array size is stored back to uprobe_multi.count (allowing user
to find out the actual array size) and array fields are populated
up to the user passed size.
All the non-array fields (path/count/flags/pid) are always set.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231125193130.834322-4-jolsa@kernel.org
Report when page pool was destroyed. Together with the inflight
/ memory use reporting this can serve as a replacement for the
warning about leaked page pools we currently print to dmesg.
Example output for a fake leaked page pool using some hacks
in netdevsim (one "live" pool, and one "leaked" on the same dev):
$ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \
--dump page-pool-get
[{'id': 2, 'ifindex': 3},
{'id': 1, 'ifindex': 3, 'destroyed': 133, 'inflight': 1}]
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Advanced deployments need the ability to check memory use
of various system components. It makes it possible to make informed
decisions about memory allocation and to find regressions and leaks.
Report memory use of page pools. Report both number of references
and bytes held.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Generate netlink notifications about page pool state changes.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
* extend support for scanning while Multi-Link Operation (MLO) connected
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmVk2JkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtD4gf7B8eR+lq6+5Qg7ObiURTci/WYlDo3prz4
R7hDmuHI5S3AJIRXF87fmC1iThIigi6dri1akRdRo3UvNr9gBTRpDGHnALuDPxOp
p8MpsG1gPNhMo0aNFfX5RDaGkfKqZQMT3er3ELG4B+k4q0glNWud07D2/0t1zSt9
rag3vlFVPRzcCz2T/Xv/nXXWaiIaQx0RLHrQshbxg0Glu+m/l3/ACBrirMiWami4
nr4SX717yckqwRElH0l5fSmCbylTDCTslo4UnpVKusxTtt1f3RxFZvsxvRgI5O9q
LEYsMtjNj2Ea3uLb0DvSNY640O/dqbRSm0PjwYxPwlmrtQB/6GMx8g==
=a+Xs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.8
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
- extend support for scanning while Multi-Link Operation (MLO) connected
* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
wifi: mac80211: Extend support for scanning while MLO connected
wifi: cfg80211: Extend support for scanning while MLO connected
wifi: ieee80211: fix PV1 frame control field name
rfkill: return ENOTTY on invalid ioctl
MAINTAINERS: update iwlwifi maintainers
wifi: rtw89: 8922a: read efuse content from physical map
wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
wifi: rtw89: mac: add to access efuse for WiFi 7 chips
wifi: rtw89: mac: use mac_gen pointer to access about efuse
wifi: rtw89: 8922a: add 8922A basic chip info
wifi: rtlwifi: drop unused const_amdpci_aspm
wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
wifi: rtw89: regd: update regulatory map to R65-R44
wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
wifi: rtw89: acpi: process 6 GHz band policy from DSM
wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
wifi: rtw89: pci: update interrupt mitigation register for 8922AE
wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
...
====================
Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
};
} __attribute__((packed));
To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
} __attribute__((packed));
} __attribute__((packed));
Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook <keescook@chromium.org>
Drivers supporting 4-way handshake offload for AP/P2p-GO and
STA/P2P-client should use this event to indicate that port has
been authorized and open for regular data traffic, sending
this event on completion of successful 4-way handshake.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/f746b59f41436e9df29c24688035fbc6eb91ab06.1699510229.git.vinayak.yadawad@broadcom.com
[rewrite it all to not use the term 'GC' that we don't use
in place of P2P-client]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To extend the support of TSF accounting in scan results for MLO
connections, allow to indicate in the scan request the link ID
corresponding to the BSS whose TSF should be used for the TSF
accounting.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231113112844.d4490bcdefb1.I8fcd158b810adddef4963727e9153096416b30ce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZWBq0gAKCRCRxhvAZXjc
ot4EAP48O5ExMtQ3/AIkNDo+/9/Iz4g7bE1HYmdyiMPO3Ou/uwEAySwBXRJrFAsS
9omvkEdqrfyguW0xgoYwcxBdATVHnAE=
=ScR3
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZV0kjgAKCRDbK58LschI
gy0EAP9XwncW2OhO72DpITluFzvWPgB0N97OANKBXjzKJrRAlQD/aUe9nlvBQuad
WsbMKLeC4wvI2X/4PEIR4ukbuZ3ypAA=
=LMVg
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-21
We've added 85 non-merge commits during the last 12 day(s) which contain
a total of 63 files changed, 4464 insertions(+), 1484 deletions(-).
The main changes are:
1) Huge batch of verifier changes to improve BPF register bounds logic
and range support along with a large test suite, and verifier log
improvements, all from Andrii Nakryiko.
2) Add a new kfunc which acquires the associated cgroup of a task within
a specific cgroup v1 hierarchy where the latter is identified by its id,
from Yafang Shao.
3) Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext,
from Dave Marchevsky.
4) Fix bpf_get_task_stack() helper to add the correct crosstask check
for the get_perf_callchain(), from Jordan Rome.
5) Fix BPF task_iter internals where lockless usage of next_thread()
was wrong. The rework also simplifies the code, from Oleg Nesterov.
6) Fix uninitialized tail padding via LIBBPF_OPTS_RESET, and another
fix for certain BPF UAPI structs to fix verifier failures seen
in bpf_dynptr usage, from Yonghong Song.
7) Add BPF selftest fixes for map_percpu_stats flakes due to per-CPU BPF
memory allocator not being able to allocate per-CPU pointer successfully,
from Hou Tao.
8) Add prep work around dynptr and string handling for kfuncs which
is later going to be used by file verification via BPF LSM and fsverity,
from Song Liu.
9) Improve BPF selftests to update multiple prog_tests to use ASSERT_*
macros, from Yuran Pereira.
10) Optimize LPM trie lookup to check prefixlen before walking the trie,
from Florian Lehner.
11) Consolidate virtio/9p configs from BPF selftests in config.vm file
given they are needed consistently across archs, from Manu Bretelle.
12) Small BPF verifier refactor to remove register_is_const(),
from Shung-Hsi Yu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in vmlinux
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_obj_id
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bind_perm
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_tcp_ca
selftests/bpf: reduce verboseness of reg_bounds selftest logs
bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)
bpf: bpf_iter_task_next: use __next_thread() rather than next_thread()
bpf: task_group_seq_get_next: use __next_thread() rather than next_thread()
bpf: emit frameno for PTR_TO_STACK regs if it differs from current one
bpf: smarter verifier log number printing logic
bpf: omit default off=0 and imm=0 in register state log
bpf: emit map name in register state if applicable and available
bpf: print spilled register state in stack slot
bpf: extract register state printing
bpf: move verifier state printing code to kernel/bpf/log.c
bpf: move verbose_linfo() into kernel/bpf/log.c
bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS
bpf: Remove test for MOVSX32 with offset=32
selftests/bpf: add iter test requiring range x range logic
veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag
...
====================
Link: https://lore.kernel.org/r/20231122000500.28126-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert following commits:
commit acec05fb78 ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06d ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00c ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c753 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d48 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab1228 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d0 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- bump version strings, by Simon Wunderlich
- Implement new multicast packet type, including its transmission,
forwarding and parsing, by Linus Lüssing (3 patches)
- Switch to new headers for sprintf and array size,
by Sven Eckelmann (2 patches)
-----BEGIN PGP SIGNATURE-----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=w0RC
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20231115' of git://git.open-mesh.org/linux-merge
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Implement new multicast packet type, including its transmission,
forwarding and parsing, by Linus Lüssing (3 patches)
- Switch to new headers for sprintf and array size,
by Sven Eckelmann (2 patches)
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the current timestamp is saved in a variable lets add the
ETHTOOL_MSG_TS_SET ethtool netlink socket to make it selectable.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new netlink message that lists all available time stamping
layers on a given interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Time stamping on network packets may happen either in the MAC or in
the PHY, but not both. In preparation for making the choice
selectable, expose both the current layers via ethtool.
In accordance with the kernel implementation as it stands, the current
layer will always read as "phy" when a PHY time stamping device is
present. Future patches will allow changing the current layer
administratively.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timestamping software or hardware flags are often used as a group,
therefore adding these masks will easier future use.
I did not use SOF_TIMESTAMPING_SYS_HARDWARE flag as it is deprecated and
not use at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.
In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.
Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com>
Fixes: db1d1e8b98 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Co-developed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The problem is this line here from subdev_do_ioctl().
client_cap->capabilities &= ~V4L2_SUBDEV_CLIENT_CAP_STREAMS;
The "client_cap->capabilities" variable is a u64. The AND operation
is supposed to clear out the V4L2_SUBDEV_CLIENT_CAP_STREAMS flag. But
because it's a 32 bit variable it accidentally clears out the high 32
bits as well.
Currently we only use the first bit and none of the upper bits so this
doesn't affect runtime behavior.
Fixes: f57fa29592 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
bugfixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVT1w0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpYXMH/AxTzofnpIJOvmY0QYLbBg3+wu0ml4X1pvJc
Ia2pm5NZLTPucesw+AFM1q8YIiRX5mBRTmxtGLFzqiC+miAKPvMJK2hQe1jlNqgM
7zBb0jeHvURvo4rvDi8a2Xvf6T2ypGapBhmcNy7VtEugLrXGHGMMzjE3IS1/Zsbm
AK70P0ujTpLZtp4TFy2qqZoaikijbAdHhu2GTo1KfFh3RcwSc1uhbrtoTHUQ42bw
0nXz8eLyuu9VmUryVgLy+j9pnS9KDMNhVCpjpVIHD4iI9L6sQVj8fwc/Bnxq8mh7
yDcagvcIK54M786cAmLWC+zQu7feMQ8FcC2zduJT+Yl2X4fX04E=
=xFJf
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
Add simple sanity checks that validate well-formed ranges (min <= max)
across u64, s64, u32, and s32 ranges. Also for cases when the value is
constant (either 64-bit or 32-bit), we validate that ranges and tnums
are in agreement.
These bounds checks are performed at the end of BPF_ALU/BPF_ALU64
operations, on conditional jumps, and for LDX instructions (where subreg
zero/sign extension is probably the most important to check). This
covers most of the interesting cases.
Also, we validate the sanity of the return register when manually
adjusting it for some special helpers.
By default, sanity violation will trigger a warning in verifier log and
resetting register bounds to "unbounded" ones. But to aid development
and debugging, BPF_F_TEST_SANITY_STRICT flag is added, which will
trigger hard failure of verification with -EFAULT on register bounds
violations. This allows selftests to catch such issues. veristat will
also gain a CLI option to enable this behavior.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement functionality to receive and forward a new TVLV capable
multicast packet type.
The new batman-adv multicast packet type allows to contain several
originator destination addresses within a TVLV. Routers on the way will
potentially split the batman-adv multicast packet and adjust its tracker
TVLV contents.
Routing decisions are still based on the selected BATMAN IV or BATMAN V
routing algorithm. So this new batman-adv multicast packet type retains
the same loop-free properties.
Also a new OGM multicast TVLV flag is introduced to signal to other
nodes that we are capable of handling a batman-adv multicast packet and
multicast tracker TVLV. And that all of our hard interfaces have an MTU
of at least 1280 bytes (IPv6 minimum MTU), as a simple solution for now
to avoid MTU issues while forwarding.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
-----BEGIN PGP SIGNATURE-----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=GM+1
-----END PGP SIGNATURE-----
Merge tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential overflow in returned value from SEARCH_TREE_V2
ioctl on 32bit architecture
- zoned mode fixes:
- drop unnecessary write pointer check for RAID0/RAID1/RAID10
profiles, now it works because of raid-stripe-tree
- wait for finishing the zone when direct IO needs a new
allocation
- simple quota fixes:
- pass correct owning root pointer when cleaning up an
aborted transaction
- fix leaking some structures when processing delayed refs
- change key type number of BTRFS_EXTENT_OWNER_REF_KEY,
reorder it before inline refs that are supposed to be
sorted, keeping the original number would complicate a lot
of things; this change needs an updated version of
btrfs-progs to work and filesystems need to be recreated
- fix error pointer dereference after failure to allocate fs
devices
- fix race between accounting qgroup extents and removing a
qgroup
* tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make OWNER_REF_KEY type value smallest among inline refs
btrfs: fix qgroup record leaks when using simple quotas
btrfs: fix race between accounting qgroup extents and removing a qgroup
btrfs: fix error pointer dereference after failure to allocate fs devices
btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe()
btrfs: get correct owning_root when dropping snapshot
btrfs: zoned: wait for data BG to be finished on direct IO allocation
btrfs: zoned: drop no longer valid write pointer check
btrfs: directly return 0 on no error code in btrfs_insert_raid_extent()
btrfs: use u64 for buffer sizes in the tree search ioctls
Currently get_perf_callchain only supports user stack walking for
the current task. Passing the correct *crosstask* param will return
0 frames if the task passed to __bpf_get_stack isn't the current
one instead of a single incorrect frame/address. This change
passes the correct *crosstask* param but also does a preemptive
check in __bpf_get_stack if the task is current and returns
-EOPNOTSUPP if it is not.
This issue was found using bpf_get_task_stack inside a BPF
iterator ("iter/task"), which iterates over all tasks.
bpf_get_task_stack works fine for fetching kernel stacks
but because get_perf_callchain relies on the caller to know
if the requested *task* is the current one (via *crosstask*)
it was failing in a confusing way.
It might be possible to get user stacks for all tasks utilizing
something like access_process_vm but that requires the bpf
program calling bpf_get_task_stack to be sleepable and would
therefore be a breaking change.
Fixes: fa28dcb82a ("bpf: Introduce helper bpf_get_task_stack()")
Signed-off-by: Jordan Rome <jordalgo@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
Martin and Vadim reported a verifier failure with bpf_dynptr usage.
The issue is mentioned but Vadim workarounded the issue with source
change ([1]). The below describes what is the issue and why there
is a verification failure.
int BPF_PROG(skb_crypto_setup) {
struct bpf_dynptr algo, key;
...
bpf_dynptr_from_mem(..., ..., 0, &algo);
...
}
The bpf program is using vmlinux.h, so we have the following definition in
vmlinux.h:
struct bpf_dynptr {
long: 64;
long: 64;
};
Note that in uapi header bpf.h, we have
struct bpf_dynptr {
long: 64;
long: 64;
} __attribute__((aligned(8)));
So we lost alignment information for struct bpf_dynptr by using vmlinux.h.
Let us take a look at a simple program below:
$ cat align.c
typedef unsigned long long __u64;
struct bpf_dynptr_no_align {
__u64 :64;
__u64 :64;
};
struct bpf_dynptr_yes_align {
__u64 :64;
__u64 :64;
} __attribute__((aligned(8)));
void bar(void *, void *);
int foo() {
struct bpf_dynptr_no_align a;
struct bpf_dynptr_yes_align b;
bar(&a, &b);
return 0;
}
$ clang --target=bpf -O2 -S -emit-llvm align.c
Look at the generated IR file align.ll:
...
%a = alloca %struct.bpf_dynptr_no_align, align 1
%b = alloca %struct.bpf_dynptr_yes_align, align 8
...
The compiler dictates the alignment for struct bpf_dynptr_no_align is 1 and
the alignment for struct bpf_dynptr_yes_align is 8. So theoretically compiler
could allocate variable %a with alignment 1 although in reallity the compiler
may choose a different alignment by considering other local variables.
In [1], the verification failure happens because variable 'algo' is allocated
on the stack with alignment 4 (fp-28). But the verifer wants its alignment
to be 8.
To fix the issue, the RFC patch ([1]) tried to add '__attribute__((aligned(8)))'
to struct bpf_dynptr plus other similar structs. Andrii suggested that
we could directly modify uapi struct with named fields like struct 'bpf_iter_num':
struct bpf_iter_num {
/* opaque iterator state; having __u64 here allows to preserve correct
* alignment requirements in vmlinux.h, generated from BTF
*/
__u64 __opaque[1];
} __attribute__((aligned(8)));
Indeed, adding named fields for those affected structs in this patch can preserve
alignment when bpf program references them in vmlinux.h. With this patch,
the verification failure in [1] can also be resolved.
[1] https://lore.kernel.org/bpf/1b100f73-7625-4c1f-3ae5-50ecf84d3ff0@linux.dev/
[2] https://lore.kernel.org/bpf/20231103055218.2395034-1-yonghong.song@linux.dev/
Cc: Vadim Fedorenko <vadfed@meta.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231104024900.1539182-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp: fix usec timestamps with TCP fastopen
- tcp_sigpool: fix some off by one bugs
- tcp: fix possible out-of-bounds reads in tcp_hash_fail()
- tcp: fix SYN option room calculation for TCP-AO
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k6Wk
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
BTRFS_EXTENT_OWNER_REF_KEY is the type of simple quotas extent owner
refs. This special inline ref goes in front of all other inline refs.
In general, inline refs have a required sorted order s.t. type never
decreases (among other requirements). This was recently reified into a
tree-checker and fsck rule, which broke simple quotas. To be fair,
though, in a sense, the new owner ref item had also violated that not
yet fully enforced requirement.
This fix brings the owner ref item into compliance with the requirement
that inline ref type never decrease.
btrfs/301 exercises this behavior and should pass again with this fix.
Fixes: d9a620f77e ("btrfs: new inline ref storing owning subvol of data extents")
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=RO+Y
-----END PGP SIGNATURE-----
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
Commit 8cea95b0bd ("tools: ynl-gen: handle do ops with no input attrs")
added support for some of the previously-skipped ops in nfsd.
Regenerate the user space parsers to fill them in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vdpa/mlx5:
VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
new maintainer
vdpa:
support for vq descriptor mappings
decouple reset of iotlb mapping from device reset
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmVCUMYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp4L0H/RKcnNXPRqzhhBI1XVQ11Z8CO8WjovcmJalu
ADHNEGmvuWnY79fp9eLiZ4iVaTx1qbzqIB5Q500DJ65jh71W7UQ8ww6CGjNUoRGs
Zoe4G09WoOf4bvDZZzVV7ml/AzMdsHWSZK8pxY3QI9CsC9Zfp9hg20QYxPylCqYx
SIJx7w2MkoojfmtOHRx1WUxaQz99yfU4Z0C5PxtRE1HGN6/a1aY0P0CAl5jq8uCK
U5sCRsfCmP7VKlspeEddMiPA35ADbCiysSobCbwGVQEs5cHpMUX7KWa+oV0tF/PY
9uyJb2rJy6zG3tXmL4XNib665ZR86HX6qiWRfm2nBQQStuHaJyg=
=mXgo
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio,vdpa: features, fixes, cleanups.
vdpa/mlx5:
- VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
- new maintainer
vdpa:
- support for vq descriptor mappings
- decouple reset of iotlb mapping from device reset
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vdpa_sim: implement .reset_map support
vdpa/mlx5: implement .reset_map driver op
vhost-vdpa: clean iotlb map during reset for older userspace
vdpa: introduce .compat_reset operation callback
vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
vhost-vdpa: reset vendor specific mapping to initial state in .release
vdpa: introduce .reset_map operation callback
virtio_pci: add check for common cfg size
virtio-blk: fix implicit overflow on virtio_max_dma_size
virtio_pci: add build offset check for the new common cfg items
virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
vduse: make vduse_class constant
vhost-scsi: Spelling s/preceeding/preceding/g
virtio: kdoc for struct virtio_pci_modern_device
vdpa: Update sysfs ABI documentation
MAINTAINERS: Add myself as mlx5_vdpa driver
virtio-balloon: correct the comment of virtballoon_migratepage()
mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa/mlx5: Update cvq iotlb mapping on ASID change
vdpa/mlx5: Make iotlb helper functions more generic
...
Jakub Kicinski