The Spreadtrum mailbox controller supports 8 channels to communicate
with MCUs, and it contains 2 different parts: inbox and outbox, which
are used to send and receive messages by IRQ mode.
Signed-off-by: Baolin Wang <baolin.wang@unisoc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The function platform_get_irq can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
devm_mbox_controller_register() may fail, and in the case of failure the
priv->clk clock that was previously enabled, should be disabled.
Fixes: 2bb7005696 ("mailbox: Add support for i.MX messaging unit")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
[Jassi: fixed merge/am conflict]
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
It is useful to know if we are the only master on a given bus. Because
this is a HW description of the bus, add it to the generic bindings.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This called from mbox_request_channel(). The caller is expecting error
pointers and not NULL so this "return NULL;" will lead to an Oops.
Fixes: 0a67003b19 ("mailbox: imx: add SCU MU support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some power hungry sub-systems like VPU has its own MUs which also
use mailbox driver, current mailbox driver uses platform driver
model and MU's power will be ON after driver probed and left ON
there, it may cause the whole sub-system can NOT enter lower power
mode, take VPU driver for example, it has runtime PM support, but
due to its MU always ON, the VPU sub-system will be always ON and
consume many power during kernel idle.
To save power in kernel idle, mailbox driver needs to support
runtime PM in order to power off MU when it is unused. However,
the runtime suspend/resume can ONLY be implemented in mailbox's
.shutdown/.startup callback, so its consumer needs to call
mbox_request_channel()/mbox_free_channel() in consumer driver's
runtime PM callback, then the MU's power will be ON/OFF along with
consumer's runtime PM status.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix the following sparse warning:
drivers/mailbox/pcc.c:571:24: warning: symbol 'pcc_mbox_driver' was not
declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Baikal-T1 System Controller is equipped with a dedicated I2C Controller
which functionality is based on the DW APB I2C IP-core, the only
difference in a way it' registers are accessed. There are three access
register provided in the System Controller registers map, which indirectly
address the normal DW APB I2C registers space. So in order to have the
Baikal-T1 System I2C Controller supported by the common DW APB I2C driver
we created a dedicated Dw I2C controller model quirk, which retrieves the
syscon regmap from the parental dt node and creates a new regmap based on
it.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This is a preparation patch before adding a quirk with custom registers
map creation required for the Baikal-T1 System I2C support.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Some platforms might need to activate the driver quirks at a very early
probe stage. For instance, Baikal-T1 System I2C doesn't need to map the
registers space as ones belong to the system controller. Instead it will
request the syscon regmap from the parental DT node. In order to be able
to do so let's retrieve the model flags right after the DW I2C private
data is created. While at it replace the or-assignment with just
assignment operator since or-ing is redundant at this stage.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Seeing the DW I2C driver is using flags-based accessors with two
conditional clauses it would be better to replace them with the regmap
API IO methods and to initialize the regmap object with read/write
callbacks specific to the controller registers map implementation. This
will be also handy for the drivers with non-standard registers mapping
(like an embedded into the Baikal-T1 System Controller DW I2C block, which
glue-driver is a part of this series).
As before the driver tries to detect the mapping setup at probe stage and
creates a regmap object accordingly, which will be used by the rest of the
code to correctly access the controller registers. In two places it was
appropriate to convert the hand-written read-modify-write and
read-poll-loop design patterns to the corresponding regmap API
ready-to-use methods.
Note the regmap IO methods return value is checked only at the probe
stage. The rest of the code won't do this because basically we have
MMIO-based regmap so non of the read/write methods can fail (this also
won't be needed for the Baikal-T1-specific I2C controller).
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[wsa: fix type of 'rx_valid' and remove outdated kdoc var description]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lkml.kernel.org/r/20200404161537.2312297-2-aford173@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A fix for the recent change to how we restore non-volatile GPRs, which broke our
emulation of reading from the DSCR (Data Stream Control Register).
And a fix for the recent rewrite of interrupt/syscall exit in C, we need to
exclude KCOV from that code, otherwise it can lead to unrecoverable faults.
Thanks to:
Daniel Axtens.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7SY4gTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLrdD/9E6AuIXrHcQvsPg9wIdSBHTgZnM50R
GD/9N21qL/426jlpIA2hWhpyDtNevxk6TsVe67JJV6XgbYkxe0vgwV28zhefYVV0
YmUiP/BfRktvyn5jR1HkOOj/9vXoz15mcUwfkTgQjQORSjuzIRhml7JZzeJL6YSa
i3EWUbAlzPJ5BFKE0XzspPxkpaIhcAPqiP55rSrrYcex4/xoaReHUyKESa1sin4X
YYuUBHI6Ze2OqhFhEVHSime+j8qUOxU4l4/3oJC8I00xDAX++S69cnGrlISGB+Pe
sDmMIyi7O89QojMNS6z9vGQ8milUqLBvTNY2IKPam7APZeyGQm95oKAD3rRx+L9+
lsiJfV2X23Lq6ZfZhQe0bHB8n0SxIjFYogC+SYmHEtiLO20+FNsdXSH6UaU3F8QU
YSgYxda41dgAhMDInEIt5D1OjGRk705b9rtIPeHGDdw/vPrwuuDnlzqmgAFG9ahv
x/Q0IvZAHgV+ZIiMNsQ2Qu9gJb7z9WQ7VB7j5KkWHS4q2Ja03uYhrRDjOOGe8sca
j87Jgfu99vQhN/YQwmoTJZJlCd9guEcUdgQCGCLyiD7ywl0xCQ1OUxO2RQfu1H5V
bmdOJFPam+sQhg4Clq8EmHzgOuaMpOqdJcDYm/7LV5w9g0qrsfZQ/EqTS3F/alrv
9fHeX2gIHaKPSQ==
=TXe7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- a fix for the recent change to how we restore non-volatile GPRs,
which broke our emulation of reading from the DSCR (Data Stream
Control Register).
- a fix for the recent rewrite of interrupt/syscall exit in C, we need
to exclude KCOV from that code, otherwise it can lead to
unrecoverable faults.
Thanks to Daniel Axtens.
* tag 'powerpc-5.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code
powerpc/64s: Fix restore of NV GPRs after facility unavailable exception
- Fix proving of mvebu chips without PWM
- Fix errorpath on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes
when flags are changed on lines.
- Fix a sleeping while holding spinlock in the mellanox
driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to
have IRQs on open drain lines flagged for output.
-----BEGIN PGP SIGNATURE-----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=NXVY
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some (very) late fixes for GPIO, none of them very serious
except the one tagged for stable for enabling IRQ on open drain lines:
- Fix probing of mvebu chips without PWM
- Fix error path on ida_get_simple() on the exar driver
- Notify userspace properly about line status changes when flags are
changed on lines.
- Fix a sleeping while holding spinlock in the mellanox driver.
- Fix return value of the PXA and Kona probe calls.
- Fix IRQ locking of open drain lines, it is fine to have IRQs on
open drain lines flagged for output"
* tag 'gpio-v5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: fix locking open drain IRQ lines
gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()
gpio: pxa: Fix return value of pxa_gpio_probe()
gpio: mlxbf2: Fix sleeping while holding spinlock
gpiolib: notify user-space about line status changes after flags are set
gpio: exar: Fix bad handling for ida_simple_get error path
gpio: mvebu: Fix probing for chips without PWM
JESD216 rev D makes BFPT 20 DWORDs. Update the BFPT size define to
reflect that.
The check for rev A or later compared the BFPT header length with the
maximum BFPT length, BFPT_DWORD_MAX. Since BFPT_DWORD_MAX was 16, and so
was the BFPT length for both rev A and B, this check worked fine. But
now, since BFPT_DWORD_MAX is 20, it means this check will also stop BFPT
parsing for rev A or B, since their length is 16.
So, instead check for BFPT_DWORD_MAX_JESD216 to stop BFPT parsing for
the first JESD216 version, and check for BFPT_DWORD_MAX_JESD216B for the
next two versions.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Nearly each Baikal-T1 IP-core is supposed to have a clock source
of particular frequency. But since there are greater than five
IP-blocks embedded into the SoC, the CCU PLLs can't fulfill all the
needs. Baikal-T1 CCU provides a set of fixed and configurable clock
dividers in order to generate a necessary signal for each chip
sub-block.
This driver creates the of-based hardware clocks for each divider
available in Baikal-T1 CCU. The same way as for PLLs we split the
functionality up into the clocks operations (gate, ungate, set rate,
etc) and hardware clocks declaration/registration procedures.
In accordance with the CCU documentation all its dividers are distributed
into two CCU sub-blocks: AXI-bus and system devices reference clocks.
The former sub-block is used to supply the clocks for AXI-bus interfaces
(AXI clock domains) and the later one provides the SoC IP-cores reference
clocks. Each sub-block is represented by a dedicated DT node, so they
have different compatible strings to distinguish one from another.
For some reason CCU provides the dividers of different types. Some
dividers can be gateable some can't, some are fixed while the others
are variable, some have special divider' limitations, some've got a
non-standard register layout and so on. In order to cover all of these
cases the hardware clocks driver is designed with an info-descriptor
pattern. So there are special static descriptors declared for the
dividers of each type with additional flags describing the block
peculiarity. These descriptors are then used to create hardware clocks
with proper operations.
Some CCU dividers provide a way to reset a domain they generate
a clock for. So the CCU AXI-bus and CCU system devices clock
drivers also perform the reset controller registration.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-5-Sergey.Semin@baikalelectronics.ru
[sboyd@kernel.org: Drop return from void function, silence sparse
warnings about initializing structs with NULL vs. integer]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Baikal-T1 is supposed to be supplied with a high-frequency external
oscillator. But in order to create signals suitable for each IP-block
embedded into the SoC the oscillator output is primarily connected to
a set of CCU PLLs. There are five of them to create clocks for the MIPS
P5600 cores, an embedded DDR controller, SATA, Ethernet and PCIe domains.
The last three domains though named by the biggest system interfaces in
fact include nearly all of the rest SoC peripherals. Each of the PLLs is
based on True Circuits TSMC CLN28HPM IP-core with an interface wrapper
(so called safe PLL' clocks switcher) to simplify the PLL configuration
procedure.
This driver creates the of-based hardware clocks to use them then in
the corresponding subsystems. In order to simplify the driver code we
split the functionality up into the PLLs clocks operations and hardware
clocks declaration/registration procedures.
Even though the PLLs are based on the same IP-core, they may have some
differences. In particular, some CCU PLLs support the output clock change
without gating them (like CPU or PCIe PLLs), while the others don't, some
CCU PLLs are critical and aren't supposed to be gated. In order to cover
all of these cases the hardware clocks driver is designed with an
info-descriptor pattern. So there are special static descriptors declared
for each PLL, which is then used to create a hardware clock with proper
operations. Additionally debugfs-files are provided for each PLL' field
to make sure the implemented rate-PLLs-dividers calculation algorithm is
correct.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-4-Sergey.Semin@baikalelectronics.ru
[sboyd@kernel.org: Silence sparse warning about initializing structs
with NULL vs. integer]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After being gained by the CCU PLLs the signals must be transformed to
be suitable for the clock-consumers. This is done by a set of dividers
embedded into the CCU. A first block of dividers is used to create
reference clocks for AXI-bus of high-speed peripheral IP-cores of the
chip. The second block dividers alter the PLLs output signals to be then
consumed by SoC peripheral devices. Both block DT nodes are ordinary
clock-providers with standard set of properties supported. But in addition
to that each clock provider can be used to reset the corresponding clock
domain. This makes the AXI-bus and System Devices CCU DT nodes to be also
reset-providers.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Baikal-T1 Clocks Control Unit is responsible for transformation of a
signal coming from an external oscillator into clocks of various
frequencies to propagate them then to the corresponding clocks
consumers (either individual IP-blocks or clock domains). In order
to create a set of high-frequency clocks the external signal is
firstly handled by the embedded into CCU PLLs. So the corresponding
dts-node is just a normal clock-provider node with standard set of
properties. Note as being part of the Baikal-T1 System Controller its
DT node is supposed to be a child the system controller node.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-2-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add details on using pstore/blk, the new backend of pstore to record
dumps to block devices, in Documentation/admin-guide/pstore-blk.rst
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-7-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Support backend for console. To enable console backend, just make
console_size be greater than 0 and a multiple of 4096.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-5-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
pstore/blk is similar to pstore/ram, but uses a block device as the
storage rather than persistent ram.
The pstore/blk backend solves two common use-cases that used to preclude
using pstore/ram:
- not all devices have a battery that could be used to persist
regular RAM across power failures.
- most embedded intelligent equipment have no persistent ram, which
increases costs, instead preferring cheaper solutions, like block
devices.
pstore/blk provides separate configurations for the end user and for the
block drivers. User configuration determines how pstore/blk operates, such
as record sizes, max kmsg dump reasons, etc. These can be set by Kconfig
and/or module parameters, but module parameter have priority over Kconfig.
Driver configuration covers all the details about the target block device,
such as total size of the device and how to perform read/write operations.
These are provided by block drivers, calling pstore_register_blkdev(),
including an optional panic_write callback used to bypass regular IO
APIs in an effort to avoid potentially destabilized kernel code during
a panic.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-3-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Implement a common set of APIs needed to support pstore storage zones,
based on how ramoops is designed. This will be used by pstore/blk with
the intention of migrating pstore/ram in the future.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-2-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Currently, it is only possible to get kmsg dumps for panic and oops,
or just panic, via "no-dump-oops". With "max-reason" it is possible to
dump messages for other kmsg_dump events, for example emerg and shutdown.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-7-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that pstore_register() can correctly pass max_reason to the kmesg
dump facility, introduce a new "max_reason" module parameter and
"max-reason" Device Tree field.
The "dump_oops" module parameter and "dump-oops" Device
Tree field are now considered deprecated, but are now automatically
converted to their corresponding max_reason values when present, though
the new max_reason setting has precedence.
For struct ramoops_platform_data, the "dump_oops" member is entirely
replaced by a new "max_reason" member, with the only existing user
updated in place.
Additionally remove the "reason" filter logic from ramoops_pstore_write(),
as that is not specifically needed anymore, though technically
this is a change in behavior for any ramoops users also setting the
printk.always_kmsg_dump boot param, which will cause ramoops to behave as
if max_reason was set to KMSG_DUMP_MAX.
Co-developed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new member to struct pstore_info for passing information about
kmesg dump maximum reason. This allows a finer control of what kmesg
dumps are sent to pstore storage backends.
Those backends that do not explicitly set this field (keeping it equal to
0), get the default behavior: store only Oopses and Panics, or everything
if the printk.always_kmsg_dump boot param is set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-5-keescook@chromium.org/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore subsystem already had a private version of this function.
With the coming addition of the pstore/zone driver, this needs to be
shared. As it really should live with printk, move it there instead.
Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
kmsg_dump() allows to dump kmesg buffer for various system events: oops,
panic, reboot, etc. It provides an interface to register a callback
call for clients, and in that callback interface there is a field
"max_reason", but it was getting ignored when set to any "reason"
higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as
kernel parameter.
Allow clients to actually control their "max_reason", and keep the
current behavior when "max_reason" is not set.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This changes the ftrace record merging code to be agnostic of
pstore/ram, as the first step to making it available as a generic
routine for other backends to use, such as pstore/zone.
Link: https://lore.kernel.org/lkml/20200510202436.63222-6-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to more cleanly pass around backend names, make the "name" member
const. This means the module param needs to be dynamic (technically, it
was before, so this actually cleans up a minor memory leak if a backend
was specified and then gets unloaded.)
Link: https://lore.kernel.org/lkml/20200510202436.63222-3-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The CON_ENABLED flag gets cleared during unregister_console(), so make
sure we already reset the console flags before calling register_console(),
otherwise unloading and reloading a pstore backend will not restart
console logging.
Signed-off-by: Kees Cook <keescook@chromium.org>
If a backend was unloaded without having first removed all its
associated records in pstorefs, subsequent removals would crash while
attempting to call into the now missing backend. Add automatic removal
from the tree in pstore_unregister(), so that no references to the
backend remain.
Reported-by: Luis Henriques <lhenriques@suse.com>
Link: https://lore.kernel.org/lkml/87o8yrmv69.fsf@suse.com
Link: https://lore.kernel.org/lkml/20200506152114.50375-11-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
The pstore.update_ms value was being disabled during pstore_unregister(),
which would cause any prior value to go unnoticed on the next
pstore_register(). Instead, just let del_timer() stop the timer, which
was always sufficient. This additionally refactors the timer reset code
and allows the timer to be enabled if the module parameter is changed
away from the default.
Link: https://lore.kernel.org/lkml/20200506152114.50375-10-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Nothing was protecting changes to the pstorefs superblock. Add locking
and refactor away is_pstore_mounted(), instead using a helper to add a
way to safely lock the pstorefs root inode during filesystem changes.
Link: https://lore.kernel.org/lkml/20200506152114.50375-9-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
JESD216D.01 says that when the address width can be 3 or 4, it defaults
to 3 and enters 4-byte mode when given the appropriate command. So, when
we see a configurable width, default to 3 and let flash that default to
4 change it in a post-bfpt fixup.
This fixes SMPT parsing for flashes with configurable address width. If
the SMPT descriptor advertises variable address width, we use
nor->addr_width as the address width. But since it was not set to any
value from the SFDP table, the read command uses an address width of 0,
resulting in an incorrect read being issued.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Under heavy fsstress, we may triggle panic while issuing discard,
because __check_sit_bitmap() detects that discard command may earse
valid data blocks, the root cause is as below race stack described,
since we removed lock when flushing quota data, quota data writeback
may race with write_checkpoint(), so that it causes inconsistency in
between cached discard entry and segment bitmap.
- f2fs_write_checkpoint
- block_operations
- set_sbi_flag(sbi, SBI_QUOTA_SKIP_FLUSH)
- f2fs_flush_sit_entries
- add_discard_addrs
- __set_bit_le(i, (void *)de->discard_map);
- f2fs_write_data_pages
- f2fs_write_single_data_page
: inode is quota one, cp_rwsem won't be locked
- f2fs_do_write_data_page
- f2fs_allocate_data_block
- f2fs_wait_discard_bio
: discard entry has not been added yet.
- update_sit_entry
- f2fs_clear_prefree_segments
- f2fs_issue_discard
: add discard entry
In order to fix this, this patch uses node_write to serialize
f2fs_allocate_data_block and checkpoint.
Fixes: 435cbab95e ("f2fs: fix quota_sync failure due to f2fs_lock_op")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add touchscreen info for the Trekstor Yourbook C11B. It seems to
use the same touchscreen as the Primebook C11, so we only add a new DMI
match.
Cc: Otmar Meier <otmarjun.meier@nexgo.de>
Reported-and-tested-by: Otmar Meier <otmarjun.meier@nexgo.de>
Signed-off-by: Bernhard Übelacker <bernhardu@mailbox.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For hardware blocked wireless switch we check two bits. Introduce
HPWMI_POWER_FW_OR_HW enum to increase readability and for easier
maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
First of all, unsigned long can overflow u32 value on 64-bit machine.
Second, simple_strtoul() doesn't check for overflow in the input.
Convert simple_strtoul() to kstrtou32() to eliminate above issues.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Refactor postcode_store() to follow standard patterns of error handling.
While at it, switch to use kstrtobool().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Baolin Wang