Find an IP address on this machine to use as a source IP, and
make up a destination IP address based on the source IP. No
actual messages will be sent, just a couple of IPsec rules are
created and deleted.
Fixes: 5e596ee171 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the "ip xfrm monitor" subprogram so as to not see
a "Terminated" message when the subprogram is killed.
Fixes: 5e596ee171 ("selftests: add xfrm state-policy-monitor to rtnetlink.sh")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sha: 702353b538 ("selftest: add test for TCP_INQ") forgot to add
tcp_inq to .gitignore.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add fragments to pass bridge and vlan tests.
Fixes: 33b01b7b4f ("selftests: add rtnetlink test script")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
The test description is displayed with the PASS/FAIL resolution after
the test is ran. There however already is one other test described
exactly like this, which makes it unclear which of the tests passed or
failed. Make the description unique.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of installing a trap before tests run and uninstalling it after
they run, mirror_vlan.sh installs it twice due to a typo. Fix the typo.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add regression tests for PF_PACKET transmission using packet_snd.
The TPACKET ring interface has tests for transmission and reception.
This is an initial stab at the same for the send call based interface.
Packets are sent over loopback, then read twice. The entire packet is
read from another packet socket and compared. The packet is also
verified to arrive at a UDP socket for protocol conformance.
The test sends a packet over loopback, testing the following options
(not the full cross-product):
- SOCK_DGRAM
- SOCK_RAW
- vlan tag
- qdisc bypass
- bind() and sendto()
- virtio_net_hdr
- csum offload (NOT actual csum feature, ignored on loopback)
- gso
Besides these basic functionality tests, the test runs from a set
of bounds checks, positive and negative. Running over loopback, which
has dev->min_header_len, it cannot generate variable length hhlen.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify that udpgso can generate segments smaller than device mtu, down
to the extreme case of 1B gso_size.
Verify that irrespective of gso_size, udpgso restricts the number of
segments it will generate per call (UDP_MAX_SEGMENTS).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing msg_zerocopy test takes additional protocol arguments.
Add a variant that takes no arguments and runs all supported variants.
Call this from kselftest.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To test offloading of mirror-to-gretap in mlxsw for cases that a
VLAN-unaware bridge is in underlay packet path, test that the STP status
of bridge egress port is reflected.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Offloading of mirror-to-gretap in mlxsw is tricky especially in cases
when the gretap underlay involves bridges. Add more tests that exercise
the bridge handling code:
- forbidden_egress tests that check vlan removal on bridge port in the
underlay packet path
- untagged_egress tests that similarly check "egress untagged"
- fdb_roaming tests that check whether learning FDB on a different port
is reflected
- stp tests for handling port STP status of bridge egress port
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename test_gretap_forbidden() and test_ip6gretap_forbidden() to a more
specific test_gretap_forbidden_cpu() and test_ip6gretap_forbidden_cpu().
This will make it clearer which is which when further down a patch is
introduced that forbids a VLAN on regular bridge port.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the final change reestablishes the original configuration, make
sure the traffic flows again as it should.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "ip6gretap" in the test name refers to the tunnel device type that
the test is supposed to be testing. However test_ip6gretap_forbidden()
tests, due to a typo, a gretap tunnel. Fix the typo.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a reusable full test that toggles STP state of a given bridge port
and checks that the mirroring reacts appropriately. The test will be
used by bridge tests in follow-up patches.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the VLAN capture is installed on a front panel device and not a
soft device, the packets are counted twice: once in fast path, and once
after they are trapped to the kernel. Resolve the problem by passing
skip_hw flag to vlan_capture_install().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the function do_test_span_vlan_dir_ips() from mirror_vlan.sh test
to a library file mirror_lib.sh to allow reuse. Fill in other entry
points similar to other testing functions in mirror_lib.sh, they will be
useful in following patches.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move vlan_capture_install() and vlan_capture_uninstall() from
mirror_vlan.sh test to lib.sh so that it can be reused in other tests.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When net test is skipped because of unmet dependencies and/or unsupported
configuration, it returns 0 which is treated as a pass by the Kselftest
framework. This leads to false positive result even when the test could
not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Change psock_tpacket to use ksft_exit_skip() when a non-root user runs
the test and add an explicit check for root and a clear message, instead
of failing the test when /sys/power/state file open fails.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add tests verifying prefix routes are inserted with expected metric.
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a bug in the original fix to prevent out of bounds speculation when
multiple tail call maps from different branches or calls end up at the
same tail call helper invocation, from Daniel.
2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
case of missing numa support and another one to update kernel config to
properly support xdp_meta.sh test, from Anders.
...
Would be great if you have a chance to merge net into net-next after that.
The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa50662 ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
PMTU tests in pmtu.sh need support for VTI, VTI6 and dummy
interfaces: add them to config file.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: d1f1b9cbf3 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at an 802.1d bridge and packet egresses through a
VLAN device.
Besides testing basic connectivity, this also tests that the traffic is
properly tagged.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to a gretap
netdevice whose underlay route points at a vlan device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at a vlan device on top of a bridge device with
vlan filtering (802.1q).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to a vlan device.
- test_vlan() tests that the packets get mirrored
- test_tagged_vlan() tests that the mirrored packets have correct inner
VLAN tag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A mirror-to-vlan test that's coming next needs to install the trap
unconditionally. Therefore extract from slow_path_trap_{,un}install()
a more generic functions trap_install() and trap_uninstall(), and covert
the former two to conditional wrappers around these.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add full_test_span_gre_dir_vlan_ips() and full_test_span_gre_dir_vlan()
to support mirror-to-gre tests that involve VLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add vlan_create() and vlan_destroy() to manage VLAN netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having a clsact qdisc on $h3 is useful in several tests, and will be
useful in more tests to come. Move the registration from all the tests
that need it into the topology file itself.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For non-GRE mirroring tests, a functions along the lines of
do_test_span_gre_dir_ips() and test_span_gre_dir_ips() are necessary,
but such that they don't assume tunnels are involved. Extract the code
from mirror_gre_lib.sh to mirror_lib.sh and convert to just use a given
device without assuming it's named "h3-$tundev". Convert the two
above-mentioned functions to wrappers that pass along the correct device
name.
Add test_span_dir() and fail_test_span_dir() to round up the API for use
by following patches.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move generic parts of mirror_gre_topo_lib.sh into a new file
mirror_topo_lib.sh. Reuse the functions in GRE topo, adding the tunnel
devices as necessary.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when flower-based mirror action is removed, mirroring stops.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When underlay route is removed, the mirrored traffic should not be
forwarded.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests that the mirroring code catches up with deletion of a mirrored-to
device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a first set of tests for fib rule match/action for
ipv4 and ipv6. Initial tests only cover action lookup table.
can be extended to cover other actions in the future.
Uses ip route get to validate the rule lookup.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reuseport_bpf_numa test case fails there's no numa support. The
test shouldn't fail if there's no support it should be skipped.
Fixes: 3c2c3c16aa ("reuseport, bpf: add test case for bpf_get_numa_node_id")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add IPv4 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.
$ fib_tests.sh -t ipv4_rt
IPv4 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv4 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.
$ fib_tests.sh -t ipv6_rt
IPv6 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new route for existing prefix (w/o NLM_F_EXCL) [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: Add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv6 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add option to pause after each test before cleanup is done. Allows
user to do manual inspection or more ad-hoc testing after each test
with the setup in tact.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add command line options for controlling pause on fail, controlling
specific tests to run and verbose mode rather than relying on environment
variables.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As more tests are added, it is convenient to have a tally at the end.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
When a script file that isn't generated uses the variable
TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is
performed the script file gets removed and git shows the file as
deleted. For script files that isn't generated TEST_PROGS_EXTENDED
should be used.
Fixes: 9faedd643f ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The generated files udpgso* shouldn't be part of TEST_PROGS, they are
used by udpgso.sh and udpgsp_bench.sh. They should be added to the
TEST_GEN_FILES to get installed without being added to the main
run_kselftest.sh script.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test fails to work if reverse-path filtering is in effect on the
mirrored-to host interface, or for all interfaces.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of hand-managing the sysctl set and restore, use the wrappers
sysctl_set() and sysctl_restore() to do the bookkeeping automatically.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two helper functions: sysctl_set() to change the value of a given
sysctl setting, and sysctl_restore() to change it back to what it was.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit a511858c75 ("selftests: fib_tests: Allow user to run
a specific test"), allow user to run only a subset of the tests using
the TESTS environment variable.
This is useful when not all the tests can pass on a given system.
Example:
# export TESTS="ping_ipv4 ping_ipv6"
# ./bridge_vlan_aware.sh
TEST: ping [PASS]
TEST: ping6 [PASS]
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We sometimes observe failures in the test due to too large discrepancy
between the measured and expected ratios. For example:
TEST: ECMP [FAIL]
Too large discrepancy between expected and measured ratios
INFO: Expected ratio 1.00 Measured ratio 1.11
Fix this by allowing an up to 15% deviation between both ratios.
Another possibility is to increase the number of generated flows, but
this will prolong the execution time of the test, which is already quite
high.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After prior kernel change, mmap() on TCP socket only reserves VMA.
We have to use getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...)
to perform the transfert of pages from skbs in TCP receive queue into such VMA.
struct tcp_zerocopy_receive {
__u64 address; /* in: address of mapping */
__u32 length; /* in/out: number of bytes to map/mapped */
__u32 recv_skip_hint; /* out: amount of bytes to skip */
};
After a successful getsockopt(...TCP_ZEROCOPY_RECEIVE...), @length contains
number of bytes that were mapped, and @recv_skip_hint contains number of bytes
that should be read using conventional read()/recv()/recvmsg() system calls,
to skip a sequence of bytes that can not be mapped, because not properly page
aligned.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These tests set up mirroring in a situation that the configuration is
incorrect, i.e. mirrored packets, if any, are not supposed to reach
destination tunnel device. Then the configuration is rectified and
mirroring is checked to have started working.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when a mirror to gretap or ip6gretap netdevice is configured,
changes to neighbors are reflected.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test for mirroring to a gretap and an ip6gretap netdevices such
that the mirroring action is triggered by a flower match.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test mirroring to a gretap and an ip6gretap netdevice with a bound
device, where the tunnel device and the bound device are in different
VRFs (an overlay / underlay configuration).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test mirror to a gretap and an ip6gretap netdevice such that the remote
address of the tunnel is reachable through a next-hop route.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test for basic mirroring to gretap and ip6gretap netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To simplify implementation of mirror-to-gretap tests, extend lib.sh with
several new functions that might potentially be useful more
broadly (although right now the mirroring tests will be the only
client).
Also add mirror_lib.sh with code useful for mirroring tests,
mirror_gre_lib.sh with code specifically useful for mirror-to-gretap
tests, and mirror_gre_topo.sh that primes a given test with a good
baseline topology that the test can then tweak to its liking.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A vti6 interface can carry IPv4 packets too.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Script in_netns.sh is a utility function and not its own test so it
shouldn't be part of the TEST_PROGS. The in_netns.sh get used by
run_afpackettests.
To install in_netns.sh without being added to the main run_kselftest.sh
script use the TEST_GEN_PROGS_EXTENDED variable.
Fixes: 5ff9c1a3dd ("selftests: net: add in_netns.sh to TEST_PROGS")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send udp data between a source and sink, optionally with udp gso.
The two processes are expected to be run on separate hosts.
A script is included that runs them together over loopback in a
single namespace for functionality testing.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corked sockets take a different path to construct a udp datagram than
the lockless fast path. Test this alternate path.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Connected sockets use path mtu instead of device mtu.
Test this path by inserting a route mtu that is lower than the device
mtu. Verify that the path mtu for the connection matches this lower
number, then run the same test as in the connectionless case.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate udp gso, including edge cases (such as min/max gso sizes).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 192dc405f3 ("selftests: net: add tcp_mmap program")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple set of tests for the IPsec xfrm commands.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This is a reference program showing how mmap() can be used
on TCP flows to implement receive zero copy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Script in_netns.sh isn't installed.
--------------------
running psock_fanout test
--------------------
./run_afpackettests: line 12: ./in_netns.sh: No such file or directory
[FAIL]
--------------------
running psock_tpacket test
--------------------
./run_afpackettests: line 22: ./in_netns.sh: No such file or directory
[FAIL]
In current code added in_netns.sh to be installed.
Fixes: cc30c93fa0 ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add multipath tests for onlink flag: one test with onlink added to
both nexthops, then tests with onlink added to only 1 nexthop.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: 1fad59ea1c ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that MTU configured from userspace is used on
link creation and changes, and that when it's not passed from
userspace, it's calculated properly from the MTU of the lower
layer.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as pmtu_vti4_link_add_mtu test, but for IPv6.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that MTU given on vti link creation is actually
configured, and that tunnel is not created with an invalid MTU
value.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that PMTU exceptions are created only when
needed on IPv4 routes with vti and xfrm, and their PMTU value is
checked as well.
We can't adopt the same approach as test_pmtu_vti6_exception()
here, because on IPv4 administrative MTU changes won't be
reflected directly on PMTU.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as pmtu_vti4_default_mtu, but on IPv6 with vti6.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test checks that the MTU assigned by default to a vti (IPv4)
interface created on top of veth is simply veth's MTU minus the
length of the encapsulated IPv4 header.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce list of tests and their descriptions, and loop on it
in main body.
Tests will now just take care of calling setup with a list of
"units" they need, and return 0 on success, 1 on failure, 2 if
the test had to be skipped.
Main script body will take care of displaying results and
cleaning up after every test. Introduce guard variable so that
we don't clean up twice in case of interrupts or unexpected
failures.
The pmtu_vti6_exception test can now run its third step even if
the previous one failed, as we can return values from it.
Also introduce support to display test descriptions, and display
aligned OK/FAIL/SKIP test outcomes. Buffer error strings so that
in case of failure we can display them right under the outcome
for each test.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
...so that it can be used for any iproute command output.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 7af137b72131 ("selftests: net: Introduce first PMTU test") I
accidentally assumed route_get_* helpers would run from a single
namespace. Make them a bit more generic, by passing the
namespace command prefix as a parameter instead.
Fixes: 7af137b72131 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David suggests it's more intuitive to return non-zero on
failures, and zero on success.
No need to introduce tail 'return 0' in functions, they will
return the exit code of the last command anyway.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add series of tests for valid and invalid nexthop specs for IPv6.
$ TEST=fib_nexthop_test ./fib_tests.sh
...
IPv6 nexthop tests
TEST: Directly connected nexthop, unicast address [ OK ]
TEST: Directly connected nexthop, unicast address with device [ OK ]
TEST: Gateway is linklocal address [ OK ]
TEST: Gateway is linklocal address, no device [ OK ]
TEST: Gateway can not be local unicast address [ OK ]
TEST: Gateway can not be local unicast address, with device [ OK ]
TEST: Gateway can not be a local linklocal address [ OK ]
TEST: Gateway can be local address in a VRF [ OK ]
TEST: Gateway can be local address in a VRF, with device [ OK ]
TEST: Gateway can be local linklocal address in a VRF [ OK ]
TEST: Redirect to VRF lookup [ OK ]
TEST: VRF route, gateway can be local address in default VRF [ OK ]
TEST: VRF route, gateway can not be a local address [ OK ]
TEST: VRF route, gateway can not be a local addr with device [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow a user to run just a specific fib test by setting the TEST
environment variable.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace 'ip -netns testns' with the alias IP. Shortens the line lengths
and makes running the commands manually a bit easier.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some users want to be able to run the tests without a configuration file
which is useful when one needs to test both virtual and physical
interfaces on the same machine.
Move the defines that set the type of interface to create and whether to
create it away from the optional configuration file to the library like
the rest of the defines.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Returning 0 gives a false sense of success when the required modules did
not even manage to be initialized and register the required net devices.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We already return an error when some dependencies (e.g., 'jq') are
missing so lets be consistent and do that for all.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the VLAN-aware bridge test, test the VLAN-unaware bridge and
make sure that ping, FDB learning and flooding work as expected.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We miss CONFIG_* fragments so test fib-onlink-tests.sh can do:
ip li add lisa type vrf table 1101
ip li add veth1 type veth peer name veth2
And the follow message occurs if it isn't enabled:
Configuring interfaces
RTNETLINK answers: Operation not supported
This enables for NET_NRF (and friends) and VETH so we can create a vrf
table and veth.
Fixes: 153e1b84f4 ("selftests: Add FIB onlink tests")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix copy&paste error and pass proper flags.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the "ok" action test so it checks that packet that is okayed does not
continue to be processed by other rules. Fix error message as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One single test implemented so far: test_pmtu_vti6_exception
checks that the PMTU of a route exception, caused by a tunnel
exceeding the link layer MTU, is affected by administrative
changes of the tunnel MTU. Creation of the route exception is
checked too.
Requested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
execute the subprocess in netns using 'ip netns exec'
Fixes: cc30c93fa0 ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For tests using veth interfaces, the test infrastructure can create
the netdevs if they do not exist. Arguably this is a preferred approach
since the tests require p$N and p$(N+1) to be pairs.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson