When QoS loopback is enabled for GDM3 or GDM4, incoming packets are
forwarded to GDM2. However, the PPE cpu port for GDM2 is not configured
in this path, causing traffic originating from GDM3/GDM4, which may
be set up as WAN ports backed by QDMA1, to be incorrectly directed
to QDMA0 instead.
Configure the PPE cpu port for GDM2 when QoS loopback is active on
GDM3 or GDM4 to ensure traffic is routed to the correct QDMA instance.
Fixes: 9cd451d414 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260417-airoha-ppe-cpu-port-for-gdm2-loopback-v1-1-c7a9de0f6f57@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to properly enable flowtable hw offloading, poll
REG_PPE_FLOW_CFG register in airoha_ppe_offload_setup routine and
wait for NPU PPE configuration triggered by ppe_init callback to complete
before running airoha_ppe_hw_init().
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260414-airoha-wait-for-npu-config-offload-setup-v2-1-5a9bf6d43aee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following PPE configuration in airoha_ppe_hw_init routine:
- 6RD hw offloading is currently not supported by Netfilter flowtable.
Disable explicitly PPE 6RD offloading in order to prevent PPE to learn
6RD flows and eventually interrupt the traffic.
- Add missing PPE bind rate configuration for L3 and L2 traffic.
PPE bind rate configuration specifies the pps threshold to move a PPE
entry state from UNBIND to BIND. Without this configuration this value
is random.
- Set ageing thresholds to the values used in the vendor SDK in order to
improve connection stability under load and avoid packet loss caused by
fast aging.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260412-airoha_ppe_hw_init-missing-bits-v1-1-06ac670819e3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Netfilter flowtable can theoretically try to offload flower rules as soon
as a net_device is registered while all the other ones are not
registered or initialized, triggering a possible NULL pointer dereferencing
of qdma pointer in airoha_ppe_set_cpu_port routine. Moreover, if
register_netdev() fails for a particular net_device, there is a small
race if Netfilter tries to offload flowtable rules before all the
net_devices are properly unregistered in airoha_probe() error patch,
triggering a NULL pointer dereferencing in airoha_ppe_set_cpu_port
routine. In order to avoid any possible race, delay offloading until
all net_devices are registered in the networking subsystem.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260329-airoha-regiser-race-fix-v2-1-f4ebb139277b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 0417adf367 ("ppp: fix race conditions in ppp_fill_forward_path")
dev_fill_forward_path() should be called with RCU read lock held. This
fix was applied to net, while the Airoha flowtable commit was applied to
net-next, so it hadn't been an issue until net was merged into net-next.
Fixes: a8bdd935d1 ("net: airoha: Add wlan flowtable TX offload")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260320094315.525126-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PPE cpu port configuration used for a specific GDM
device was set just running ndo_init() callback during the device
initialization. The selected PPE cpu port configuration depends on the QDMA
block assigned to the GDM port. The QDMA block is selected according to
the GDM port LAN/WAN configuration as specified in the commit
'8737d7194d6d ("net: airoha: select QDMA block according LAN/WAN
configuration"). However, the user selected PPE cpu port configuration can
be different with respect to the one hardcoded in the NPU firmware binary.
The hardcoded NPU PPE cpu port configuration is loaded initializing the PPE
engine running the NPU ops ppe_init() callback in airoha_ppe_offload_setup
routine (this is executed at runtime by the netfilter flowtable
infrastructure during flow offloading).
Reset the PPE cpu port configuration in airoha_ppe_hw_init routine in
order to apply the user requested setup according to the device DTS.
Please note this patch is fixing an issue not visible to the user (so we
do not need to backport it) since airoha_eth driver currently supports just
the internal phy available via the MT7530 DSA switch and there are no WAN
interfaces officially supported since PCS/external phy is not merged
mainline yet (it will be posted with following patches).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260317-airoha-fix-ppe-def-cpu-v1-1-338533d8e234@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corrected the typo in the function name from
`airhoa_is_lan_gdm_port` to `airoha_is_lan_gdm_port`. This change ensures
consistency in the API naming convention.
Signed-off-by: Zhengping Zhang <aquapinn@qq.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/tencent_E4FD5D6BC0131E617D848896F5F9FCED6E0A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260105-airoha-fw-ethtool-v2-1-3b32b158cc31@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Airoha_eth driver forwards offloaded uplink traffic (packets received
on GDM1 and forwarded to GDM{3,4}) to GDM2 in order to apply hw QoS.
This is correct if the device does not support a dedicated GDM2 port.
In this case, in order to enable hw offloading for uplink traffic,
the packets should be sent to GDM{3,4} directly.
Fixes: 9cd451d414 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251113-airoha-hw-offload-gdm2-fix-v1-1-7e4ca300872f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Explicit the size of entries pointed by hwe pointer in
airoha_ppe_foe_get_entry_locked routine
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-12-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rely on airoha_ppe_foe_commit_sram_entry routine to flush SRAM PPE table
entries. This patch allow moving PPE SRAM flush during PPE setup and
avoid dumping uninitialized values via the debugfs if no entries are
offloaded yet.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-9-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce airoha_ppe_foe_commit_sram_entry routine in order to configure
the SRAM PPE entries directly via the CPU instead of using the NPU APIs.
This is a preliminary patch to enable netfilter flowtable hw offload for
AN7583 SoC.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-8-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now each PPE has always PPE_STATS_NUM_ENTRIES entries so we do not need
to run airoha_ppe_is_enabled routine to check if the hash refers to
PPE1 or PPE2.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-7-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AN7583 SoC runs a single PPE device while EN7581 runs two of them.
Moreover PPE SRAM in AN7583 SoC is reduced to 8K (while SRAM is 16K on
EN7581). Take into account PPE memory layout during PPE configuration.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-6-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename airoha_ppe2_is_enabled() in airoha_ppe_is_enabled() and
generalize it in order to check if each PPE module is enabled.
Rely on airoha_ppe_is_enabled routine to properly initialize PPE for
AN7583 SoC since AN7583 does not support PPE2.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-5-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce airoha_ppe_get_num_stats_entries and
airoha_ppe_get_num_total_stats_entries routines in order to make the
code more readable controlling if CONFIG_NET_AIROHA_FLOW_STATS is
enabled or disabled.
Modify airoha_ppe_foe_get_flow_stats_index routine signature relying on
airoha_ppe_get_num_total_stats_entries().
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-3-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a NPU callback to initialize flow stats and remove NPU stats
initialization from airoha_npu_get routine. Add num_stats_entries to
airoha_npu_ppe_stats_setup routine.
This patch makes the code more readable since NPU statistic are now
initialized on demand by the NPU consumer (at the moment NPU statistic
are configured just by the airoha_eth driver).
Moreover this patch allows the NPU consumer (PPE module) to explicitly
enable/disable NPU flow stats.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924-airoha-npu-init-stats-callback-v1-1-88bdf3c941b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Export airoha_ppe_check_skb routine in ppe_dev ops. check_skb callback
will be used by the MT76 driver in order to offload the traffic received
by the wlan NIC and forwarded to the ethernet one.
Add rx_wlan parameter to airoha_ppe_check_skb routine signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-3-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce airoha_ppe_dev struct as container for PPE offload callbacks
consumed by the MT76 driver during flowtable offload for traffic
received by the wlan NIC and forwarded to the wired one.
Add airoha_ppe_setup_tc_block_cb routine to PPE offload ops for MT76
driver.
Rely on airoha_ppe_dev pointer in airoha_ppe_setup_tc_block_cb
signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-2-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rely on airoha_eth struct in airoha_ppe_flow_offload_cmd routine
signature and in all the called subroutines.
This is a preliminary patch to introduce flowtable offload for traffic
received by the wlan NIC and forwarded to the ethernet one.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-1-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SW hash computed by airoha_ppe_foe_get_entry_hash routine (used for
foe_flow hlist) can theoretically produce collisions between two
different HW PPE entries.
In airoha_ppe_foe_insert_entry() if the collision occurs we will mark
the second PPE entry in the list as stale (setting the hw hash to 0xffff).
Stale entries are no more updated in airoha_ppe_foe_flow_entry_update
routine and so they are removed by Netfilter.
Fix the problem not marking the second entry as stale in
airoha_ppe_foe_insert_entry routine if we have already inserted the
brand new entry in the PPE table and let Netfilter remove real stale
entries according to their timestamp.
Please note this is just a theoretical issue spotted reviewing the code
and not faced running the system.
Fixes: cd53f62261 ("net: airoha: Add L2 hw acceleration support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250818-airoha-en7581-hash-collision-fix-v1-1-d190c4b53d1c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to avoid any possible race we need to hold the ppe_lock
spinlock accessing the hw PPE table. airoha_ppe_foe_get_entry routine is
always executed holding ppe_lock except in airoha_ppe_debugfs_foe_show
routine. Fix the problem introducing airoha_ppe_foe_get_entry_locked
routine.
Fixes: 3fe15c640f ("net: airoha: Introduce PPE debugfs support")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250731-airoha_ppe_foe_get_entry_locked-v2-1-50efbd8c0fd6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_ppe_foe_get_entry routine can return NULL, so check the returned
pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update()
Fixes: b81e0f2b58 ("net: airoha: Add FLOW_CLS_STATS callback support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set PPE entry smac_id field to 0xf in airoha_ppe_foe_commit_subflow_entry
routine for IPv6 traffic in order to instruct the hw to keep original
source mac address for IPv6 hw accelerated traffic in bridge mode.
Fixes: cd53f62261 ("net: airoha: Add L2 hw acceleration support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250602-airoha-flowtable-ipv6-fix-v2-3-3287f8b55214@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ib2 and airoha_foe_mac_info_common have not the same offsets in
airoha_foe_bridge and airoha_foe_ipv6 structures. Current codebase does
not accelerate IPv6 traffic in bridge mode since ib2 and l2 info are not
set properly copying airoha_foe_bridge struct into airoha_foe_ipv6 one
in airoha_ppe_foe_commit_subflow_entry routine.
Fix IPv6 hw acceleration in bridge mode resolving ib2 and
airoha_foe_mac_info_common overwrite in
airoha_ppe_foe_commit_subflow_entry() and configuring them with proper
values.
Fixes: cd53f62261 ("net: airoha: Add L2 hw acceleration support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250602-airoha-flowtable-ipv6-fix-v2-2-3287f8b55214@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
UPDMEM source-mac table is a key-value map used to store devices mac
addresses according to the port identifier. UPDMEM source mac table is
used during IPv6 traffic hw acceleration since PPE entries, for space
constraints, do not contain the full source mac address but just the
identifier in the UPDMEM source-mac table.
Configure UPDMEM source-mac table with device mac addresses and set
the source-mac ID field for PPE IPv6 entries in order to select the
proper device mac address as source mac for L3 IPv6 hw accelerated traffic.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250602-airoha-flowtable-ipv6-fix-v2-1-3287f8b55214@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to improve packet processing and packet forwarding
performances, EN7581 SoC supports consuming SRAM instead of DRAM for
hw forwarding descriptors queue.
For downlink hw accelerated traffic request to consume SRAM memory
for hw forwarding descriptors queue.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-4-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since netfilter flowtable entries are now refreshed by flow-stats
polling, we can disable hw packet keepalive used to periodically send
packets belonging to offloaded flows to the kernel in order to refresh
flowtable entries.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516-airoha-en7581-flowstats-v2-3-06d5fbf28984@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce per-flow stats accounting to the flowtable hw offload in
the airoha_eth driver. Flow stats are split in the PPE and NPU modules:
- PPE: accounts for high 32bit of per-flow stats
- NPU: accounts for low 32bit of per-flow stats
FLOW_CLS_STATS can be enabled or disabled at compile time.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516-airoha-en7581-flowstats-v2-2-06d5fbf28984@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce tc matchall filter offload support in airoha_eth driver.
Matchall hw filter is used to implement hw rate policing via tc action
police:
$tc qdisc add dev eth0 handle ffff: ingress
$tc filter add dev eth0 parent ffff: matchall action police \
rate 100mbit burst 1000k drop
The current implementation supports just drop/accept as exceed/notexceed
actions. Moreover, rate and burst are the only supported configuration
parameters.
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250415-airoha-hw-rx-ratelimit-v4-1-03458784fbc3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to mtk driver, introduce the capability to offload L2 traffic
defining flower rules in the PSE/PPE engine available on EN7581 SoC.
Since the hw always reports L2/L3/L4 flower rules, link all L2 rules
sharing the same L2 info (with different L3/L4 info) in the L2 subflows
list of a given L2 PPE entry.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250409-airoha-flowtable-l2b-v2-2-4a1e3935ea92@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce l2_flows rhashtable in airoha_ppe struct in order to
store L2 flows committed by upper layers of the kernel. This is a
preliminary patch in order to offload L2 traffic rules.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250409-airoha-flowtable-l2b-v2-1-4a1e3935ea92@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dev pointer in airoha_ppe_foe_entry_prepare routine is not strictly
a device allocated by airoha_eth driver since it is an egress device
and the flowtable can contain even wlan, pppoe or vlan devices. E.g:
flowtable ft {
hook ingress priority filter
devices = { eth1, lan1, lan2, lan3, lan4, wlan0 }
flags offload ^
|
"not allocated by airoha_eth" --
}
In this case airoha_get_dsa_port() will just return the original device
pointer and we can't assume netdev priv pointer points to an
airoha_gdm_port struct.
Fix the issue validating egress gdm port in airoha_ppe_foe_entry_prepare
routine before accessing net_device priv pointer.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250401-airoha-validate-egress-gdm-port-v4-1-c7315d33ce10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to PPE support for Mediatek devices, introduce PPE debugfs
in order to dump binded and unbinded flows.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable hw redirection for traffic received on GDM2 port to GDM{3,4}.
This is required to apply Qdisc offloading (HTB or ETS) for traffic to
and from GDM{3,4} port.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce netfilter flowtable integration in order to allow airoha_eth
driver to offload 5-tuple flower rules learned by the PPE module if the
user accelerates them using a nft configuration similar to the one reported
below:
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { lan1, lan2, lan3, lan4, eth1 }
flags offload;
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lorenzo Bianconi