The rest for 6.19 merge window. The only slightly large change is
the enablement of CIX HD-audio controller, which took a bit time to
be cooked up, while most of other changes are device-specific small
trivial fixes.
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so
it can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks
-----BEGIN PGP SIGNATURE-----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=3ys0
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Initialize 'status1' with a default value to resolve the static analysis
smatch reported error "uninitialized symbol 'status1'".
The 'status1' variable is used to create a buff using "kmemdup".
So, ensure to initialize the value before it is read.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251204052201.16286-3-hariconscious@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Thunderbolt Dock G2 includes a headset jack with support for
jack detection. However, this being a UAC1 device, detection is
implemented via vendor-defined URB Controls.
Implement it in a similar way to the Dell WD15/19 docks, but with
different commands.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://patch.msgid.link/20251126003805.2705503-3-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modify the realtek_add_jack function used for the jack detection quirk
to allow passing the mixer unit id and an snd_kcontrol_new.
This allows adding additional devices that require the same quirk, but
implement jack detection with different commands.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://patch.msgid.link/20251126003805.2705503-2-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drop the driver-specific field_get() and field_prep() macros, in favor
of the globally available variants from <linux/bitfield.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants. This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
As a preparation of introduction QUIRK_FLAG_MIXER_CAPTURE_MIN_MUTE
Also make it printing an info while applying
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-1-d4ca777b8512@uniontech.com
Introduce an auto-cleanup macro for the temporary shutdown locks for
USB-audio, and replace the manual lock/unlock pairs with it.
Namely, the former
err = snd_usb_lock_shutdown(chip);
if (err < 0)
return err;
....
snd_usb_unlock_shutdown(chip);
is replaced with
CLASS(snd_usb_lock, pm)(chip);
if (pm.err < 0)
return pm.err;
....
with the automatic unlocking.
Link: https://patch.msgid.link/20250811101647.8637-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent addition of DualSense mixer quirk relies on the input
device handle, and the build can fail if CONFIG_INPUT isn't set.
Put (rather ugly) workarounds to wrap with IS_REACHABLE() for avoiding
the build error.
Fixes: 79d561c4ec ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506130733.gnPKw2l3-lkp@intel.com/
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250613081543.7404-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: 79d561c4ec ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250612060228.1518028-1-nichen@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Sony DualSense wireless controller (PS5) features an internal mono
speaker, but it also provides a 3.5mm jack socket for headphone output
and headset microphone input.
Since this is a UAC1 device, it doesn't advertise any jack detection
capability. However, the controller is able to report HP & MIC insert
events via HID, i.e. through a dedicated input device managed by the
hid-playstation driver.
Add a quirk to create the jack controls for headphone and headset mic,
respectively, and setup an input handler for each of them in order to
intercept the related hotplug events.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-9-1a821463b632@collabora.com
Adding a memory barrier before wake_up() in
snd_usb_soundblaster_remote_complete() is supposed to ensure the write
to mixer->rc_code is visible in wait_event_interruptible() from
snd_usb_sbrc_hwdep_read().
However, this is not really necessary, since wake_up() is just a wrapper
over __wake_up() which already executes a full memory barrier before
accessing the state of the task to be waken up.
Drop the redundant call to wmb() and implicitly fix the checkpatch
complaint:
WARNING: memory barrier without comment
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-8-1a821463b632@collabora.com
Address all whitespace & blank line(s) related issues reported by
checkpatch.pl:
ERROR: trailing whitespace
ERROR: space required after that ',' (ctx:VxV)
WARNING: Missing a blank line after declarations
CHECK: Please use a blank line after function/struct/union/enum declarations
CHECK: Please don't use multiple blank lines
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-2-1a821463b632@collabora.com
so alsamixer can show the controls in correct categories: capture/playback
Fixes: 171bb5123f ("ALSA: usb-audio: Add Pioneer DJ DJM-V10 support")
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://patch.msgid.link/20250515122345.3911-2-franta-linux@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pioneer DJ DJM-V10 is a high end mixer that acts like a USB sound card.
The MIDI controller part is standard but the PCM part is "vendor specific".
Input and output is enabled by this patch:
- 12 channels (6 stereo) in each direction
- 44 100 / 48 000 / 96 000 Hz
- S24_3LE
Capture channels can be configured through alsamixer.
Playback channels are fixed and controlled by hardware knobs on the mixer.
Signed-off-by: František Kučera <franta-linux@frantovo.cz>
Link: https://patch.msgid.link/20250421155953.4440-1-konference@frantovo.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=GXpz
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- PlayStation 5 controllers support (Alex Henrie)
- big revamp and modernization of the aged hid-pidff force feedback
driver (Tomasz Pakuła)
- conversion of hid-lg-g15 to standard multicolor LED API (Kate Hsuan)
- improvement of behavior of Human Presence Sensor (HPD) in amd_sfh
driver (Mario Limonciello)
- other assorted fixes, code cleanups and device ID additions
* tag 'hid-for-linus-2025032601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (70 commits)
HID: remove superfluous (and wrong) Makefile entry for CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER
HID: Intel-thc-hid: Intel-quickspi: Correct device state names gramatically
HID: wacom: Remove static WACOM_PKGLEN_MAX limit
HID: amd_sfh: Don't show wrong status for amd_sfh_hpd_info()
HID: amd_sfh: Default to HPD disabled
HID: amd_sfh: Allow configuring whether HPD is enabled or disabled
HID: pidff: Fix set_device_control()
HID: pidff: Fix 90 degrees direction name North -> East
HID: pidff: Compute INFINITE value instead of using hardcoded 0xffff
HID: pidff: Clamp effect playback LOOP_COUNT value
HID: pidff: Rename two functions to align them with naming convention
HID: lenovo: silence unreachable code warning
HID: lenovo: Fix to ensure the data as __le32 instead of u32
HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
HID: bpf: new hid_bpf_async.h common header
HID: bpf: import new kfunc from v6.10 & v6.11
HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
HID: bpf: Added updated Kamvas Pro 19 descriptor
HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
HID: bpf: Add support for the default firmware mode of the Huion K20
...
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mixer quicks for the Pioneer DJM-A9 mixer was added in 5289d00 with
additional capture level values added to the common DJM array of values.
This breaks the existing DJM mixers however as alsa-utils relies on
enumeration of the actual mixer options based on the value array which
results in error when storing state.
This commit just separates the A9 values into a separate array and
references them in the corresponding mixer control.
Fixes: 5289d00696 ("ALSA: usb-audio: Add Pioneer DJ/AlphaTheta DJM-A9 Mixer")
Signed-off-by: Olivia Mackintosh <livvy@base.nu>
Link: https://patch.msgid.link/20250316153323.16381-1-livvy@base.nu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for Presonus Studio 1824c, a usb interface
that's UAC2 compliant and it is enabled by identifying the device
ID 194f:010d and works with the code brought in by the 1810c change from
Nick Kossifidis in 2020-02-15.
More infos on the card:
https://www.presonus.com/products/Studio-1824c
Signed-off-by: Amin Dandache <amin.dandache@gmail.com>
Link: https://patch.msgid.link/20250227133027.21148-1-git@amin85.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many Poly/Plantronics headset families name the feature, input,
and/or output units in a such a way to produce control names
that are not recognized by user space. As such, the volume and
mute events do not get routed to the headset's audio controls.
As an example from a product family:
The microphone mute control is named
Headset Microphone Capture Switch
and the headset volume control is named
Headset Earphone Playback Volume
The quirk fixes these to become
Headset Capture Switch
Headset Playback Volume
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add a new kernel driver for the Focusrite Control Protocol (FCP),
which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett
USB, Clarett+, and Vocaster series audio interfaces. This driver
provides a user-space control interface via ALSA's hwdep subsystem.
Unlike the existing Scarlett2 driver which implements all ALSA
controls in kernel space, this new FCP driver takes a different
approach by providing a minimal kernel interface that allows a
user-space driver to send FCP commands and receive notifications. The
only control implemented in kernel space is the Level Meter, since it
requires frequent polling of volatile data.
While this driver supports all interfaces that the Scarlett2 driver
works with, it is initially enabled only for 4th Gen 16i16, 18i16,
and 18i20 interfaces that are not supported by the Scarlett2 driver.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems there is an alternate version of the hardware with a different
PID. User testing reveals this still works with the same interface as far
as the kernel is concerned, so just add the extra PID. Thanks to Heiko
Engemann for testing with this version.
Due to the way quirks-table.h is structured, that means we have to turn
the entire quirk struct into a macro to avoid duplicating it...
Cc: stable@vger.kernel.org
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20241202-rme-digiface-usb-id-v1-1-50f730d7a46e@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This also includes a change to the capture level as they differ with
this device, as well as additional values for prefader channels.
Acked-by: Olivia Mackintosh <livvy@base.nu>
Signed-off-by: Sarah Grant <s@srd.tw>
Link: https://patch.msgid.link/20241025163927.12662-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.
This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.
According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.
The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.
This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.
Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.
This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing input gain and master output mixer controls for
RME Babyface Pro.
This patch implements:
1. Input gain controls for 2 mic and 2 line inputs
2. Master output volume controls for all 12 output channels
These additions allow for more complete control of the Babyface Pro under
Linux.
Signed-off-by: Stefan Stistrup <sstistrup@gmail.com>
Link: https://patch.msgid.link/20240809204922.20112-1-sstistrup@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of the explicit "1 << x", use BIT() macro for one bit values.
This will improve the readability and also avoids the possible bad
value for 31bit shift.
Link: https://patch.msgid.link/20240715123646.26679-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add Focusrite Vocaster One and Two USB IDs, notification arrays,
config sets, and device info data.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <5fb48555a8db7bb322b25784b165829357cd6e42.1710264833.git.g@b4.vu>
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Signed-off-by: Sarah Grant <s@srd.tw>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This driver was originally developed for the Focusrite Scarlett Gen 2
series. Since then Focusrite have used a similar protocol for their
Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series.
Let's call this common protocol the "Scarlett 2 Protocol" and rename
the driver to scarlett2 to not imply that it is restricted to Gen 2
series devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e1ad7f69a1e20cdb39094164504389160c1a0a0b.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It has been confirmed that all devices in the Focusrite Clarett USB
series work the same as the devices in the Clarett+ series. Add the
missing PIDs to enable support for the Clarett 2Pre and 4Pre USB.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZSFB8EVTG1PK1eq/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Focusrite Clarett+ series uses the same protocol as the Scarlett
Gen 2 and Gen 3 series. This patch adds support for the Clarett+ 2Pre
and Clarett+ 4Pre similarly to the existing 8Pre support by adding
appropriate entries to the scarlett2 driver.
The Clarett 2Pre USB and 4Pre USB presumably use the same protocol as
well, so support for them can easily be added if someone can test.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZRL7qjC3tYQllT3H@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Focusrite Clarett+ 8Pre uses the same protocol as the Scarlett Gen
2 and Gen 3 product range. This patch adds support for the Clarett+
8Pre by adding appropriate entries to the scarlett2 driver.
The Clarett+ 2Pre and 4Pre, and the Clarett USB product line
presumably use the same protocol as well, so support for them can
easily be added if someone can test.
Signed-off-by: Christian Colglazier <christian@cacolglazier.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20220809043241.GA2749152@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds