* Clear LLBCTL if secondary mmu mapping changes.
* Add hypercall service support for usermode VMM.
x86:
* Add a comment to kvm_mmu_do_page_fault() to explain why KVM performs a
direct call to kvm_tdp_page_fault() when RETPOLINE is enabled.
* Ensure that all SEV code is compiled out when disabled in Kconfig, even
if building with less brilliant compilers.
* Remove a redundant TLB flush on AMD processors when guest CR4.PGE changes.
* Use str_enabled_disabled() to replace open coded strings.
* Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's APICv cache
prior to every VM-Enter.
* Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
* Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
* Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
* Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
* Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not. Previously, the code assumed that KVM_HC_MAP_GPA_RANGE
specifically went to userspace, and all the others did not; the new code
need not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not.
* As part of enabling TDX virtual machines, support support separation of
private/shared EPT into separate roots. When TDX will be enabled, operations
on private pages will need to go through the privileged TDX Module via SEAMCALLs;
as a result, they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the private EPT in
host memory, and define entries in kvm_x86_ops to operate on external page
tables such as the TDX private EPT.
* The recently introduced conversion of the NX-page reclamation kthread to
vhost_task moved the task under the main process. The task is created as
soon as KVM_CREATE_VM was invoked and this, of course, broke userspace that
didn't expect to see any child task of the VM process until it started
creating its own userspace threads. In particular crosvm refuses to fork()
if procfs shows any child task, so unbreak it by creating the task lazily.
This is arguably a userspace bug, as there can be other kinds of legitimate
worker tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they show
as "Kthread: 1" in proc/.../status?
x86 - Intel:
* Fix a bug where KVM updates hardware's APICv cache of the highest ISR bit
while L2 is active, while ultimately results in a hardware-accelerated L1
EOI effectively being lost.
* Honor event priority when emulating Posted Interrupt delivery during nested
VM-Enter by queueing KVM_REQ_EVENT instead of immediately handling the
interrupt.
* Rework KVM's processing of the Page-Modification Logging buffer to reap
entries in the same order they were created, i.e. to mark gfns dirty in the
same order that hardware marked the page/PTE dirty.
* Misc cleanups.
Generic:
* Cleanup and harden kvm_set_memory_region(); add proper lockdep assertions when
setting memory regions and add a dedicated API for setting KVM-internal
memory regions. The API can then explicitly disallow all flags for
KVM-internal memory regions.
* Explicitly verify the target vCPU is online in kvm_get_vcpu() to fix a bug
where KVM would return a pointer to a vCPU prior to it being fully online,
and give kvm_for_each_vcpu() similar treatment to fix a similar flaw.
* Wait for a vCPU to come online prior to executing a vCPU ioctl, to fix a
bug where userspace could coerce KVM into handling the ioctl on a vCPU that
isn't yet onlined.
* Gracefully handle xarray insertion failures; even though such failures are
impossible in practice after xa_reserve(), reserving an entry is always followed
by xa_store() which does not know (or differentiate) whether there was an
xa_reserve() before or not.
RISC-V:
* Zabha, Svvptc, and Ziccrse extension support for guests. None of them
require anything in KVM except for detecting them and marking them
as supported; Zabha adds byte and halfword atomic operations, while the
others are markers for specific operation of the TLB and of LL/SC
instructions respectively.
* Virtualize SBI system suspend extension for Guest/VM
* Support firmware counters which can be used by the guests to collect
statistics about traps that occur in the host.
Selftests:
* Rework vcpu_get_reg() to return a value instead of using an out-param, and
update all affected arch code accordingly.
* Convert the max_guest_memory_test into a more generic mmu_stress_test.
The basic gist of the "conversion" is to have the test do mprotect() on
guest memory while vCPUs are accessing said memory, e.g. to verify KVM
and mmu_notifiers are working as intended.
* Play nice with treewrite builds of unsupported architectures, e.g. arm
(32-bit), as KVM selftests' Makefile doesn't do anything to ensure the
target architecture is actually one KVM selftests supports.
* Use the kernel's $(ARCH) definition instead of the target triple for arch
specific directories, e.g. arm64 instead of aarch64, mainly so as not to
be different from the rest of the kernel.
* Ensure that format strings for logging statements are checked by the
compiler even when the logging statement itself is disabled.
* Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. It seems that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that events
are counting correctly without actually knowing what the events count
given the underlying hardware; this can happen if Intel reuses a
formerly microarchitecture-specific event encoding as an architectural
event, as was the case for Top-Down Slots.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeTuzoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOkBwf8CRNExYaM3j9y2E7mmo6AiL2ug6+J
Uy5Hai1poY48pPwKC6ke3EWT8WVsgj/Py5pCeHvLojQchWNjCCYNfSQluJdkRxwG
DgP3QUljSxEJWBeSwyTRcKM+IySi5hZd1IFo3gePFRB829Jpnj05vjbvCyv8gIwU
y3HXxSYDsViaaFoNg4OlZFsIGis7mtknsZzk++QjuCXmxNa6UCbv3qvE/UkVLhVg
WH65RTRdjk+EsdwaOMHKuUvQoGa+iM4o39b6bqmw8+ZMK39+y33WeTX/y5RXsp1N
tUUBRfS+MuuYgC/6LmTr66EkMzoChxk3Dp3kKUaCBcfqRC8PxQag5reZhw==
=NEaO
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
Add a VM type define for TDX.
Future changes will need to lay the ground work for TDX support by
making some behavior conditional on the VM being a TDX guest.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Message-ID: <20240718211230.1492011-4-rick.p.edgecombe@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following new HSMP messages are available on family 0x1A, model 0x00-0x1F
platforms with protocol version 7. Add support for them in the driver.
- SetXgmiPstateRange(26h)
- CpuRailIsoFreqPolicy(27h)
- DfcEnable(28h)
- GetRaplUnit(30h)
- GetRaplCoreCounter(31h)
- GetRaplPackageCounter(32h)
Also update HSMP message PwrEfficiencyModeSelection-21h. This message is
updated to include GET option in recent firmware.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20241118102752.11703-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
essentially guessing which pfns are refcounted pages. The reason to
do so was that KVM needs to map both non-refcounted pages (for example
BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain
refcounted pages. However, the result was security issues in the past,
and more recently the inability to map VM_IO and VM_PFNMAP memory
that _is_ backed by struct page but is not refcounted. In particular
this broke virtio-gpu blob resources (which directly map host graphics
buffers into the guest as "vram" for the virtio-gpu device) with the
amdgpu driver, because amdgpu allocates non-compound higher order pages
and the tail pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the per-architecture
code, to always work on the pfn whenever possible. The large series that
did this, from David Stevens and Sean Christopherson, also cleaned up
substantially the set of functions that provided arch code with the
pfn for a host virtual addresses. The previous maze of twisty little
passages, all different, is replaced by five functions (__gfn_to_page,
__kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages)
saving almost 200 lines of code.
ARM:
* Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
* Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
* Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
* PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
* Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
* Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
* Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
* Add iocsr and mmio bus simulation in kernel.
* Add in-kernel interrupt controller emulation.
* Add support for virtualization extensions to the eiointc irqchip.
PPC:
* Drop lingering and utterly obsolete references to PPC970 KVM, which was
removed 10 years ago.
* Fix incorrect documentation references to non-existing ioctls
RISC-V:
* Accelerate KVM RISC-V when running as a guest
* Perf support to collect KVM guest statistics from host side
s390:
* New selftests: more ucontrol selftests and CPU model sanity checks
* Support for the gen17 CPU model
* List registers supported by KVM_GET/SET_ONE_REG in the documentation
x86:
* Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve
documentation, harden against unexpected changes. Even if the hardware
A/D tracking is disabled, it is possible to use the hardware-defined A/D
bits to track if a PFN is Accessed and/or Dirty, and that removes a lot
of special cases.
* Elide TLB flushes when aging secondary PTEs, as has been done in x86's
primary MMU for over 10 years.
* Recover huge pages in-place in the TDP MMU when dirty page logging is
toggled off, instead of zapping them and waiting until the page is
re-accessed to create a huge mapping. This reduces vCPU jitter.
* Batch TLB flushes when dirty page logging is toggled off. This reduces
the time it takes to disable dirty logging by ~3x.
* Remove the shrinker that was (poorly) attempting to reclaim shadow page
tables in low-memory situations.
* Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE.
* Advertise CPUIDs for new instructions in Clearwater Forest
* Quirk KVM's misguided behavior of initialized certain feature MSRs to
their maximum supported feature set, which can result in KVM creating
invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero
value results in the vCPU having invalid state if userspace hides PDCM
from the guest, which in turn can lead to save/restore failures.
* Fix KVM's handling of non-canonical checks for vCPUs that support LA57
to better follow the "architecture", in quotes because the actual
behavior is poorly documented. E.g. most MSR writes and descriptor
table loads ignore CR4.LA57 and operate purely on whether the CPU
supports LA57.
* Bypass the register cache when querying CPL from kvm_sched_out(), as
filling the cache from IRQ context is generally unsafe; harden the
cache accessors to try to prevent similar issues from occuring in the
future. The issue that triggered this change was already fixed in 6.12,
but was still kinda latent.
* Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM
over-advertises SPEC_CTRL when trying to support cross-vendor VMs.
* Minor cleanups
* Switch hugepage recovery thread to use vhost_task. These kthreads can
consume significant amounts of CPU time on behalf of a VM or in response
to how the VM behaves (for example how it accesses its memory); therefore
KVM tried to place the thread in the VM's cgroups and charge the CPU
time consumed by that work to the VM's container. However the kthreads
did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM
instances inside could not complete freezing. Fix this by replacing the
kthread with a PF_USER_WORKER thread, via the vhost_task abstraction.
Another 100+ lines removed, with generally better behavior too like
having these threads properly parented in the process tree.
* Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't
really work; there was really nothing to work around anyway: the broken
patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL
MSR is virtualized and therefore unaffected by the erratum.
* Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'.
x86 selftests:
* x86 selftests can now use AVX.
Documentation:
* Use rST internal links
* Reorganize the introduction to the API document
Generic:
* Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead
of RCU, so that running a vCPU on a different task doesn't encounter long
due to having to wait for all CPUs become quiescent. In general both reads
and writes are rare, but userspace that supports confidential computing is
introducing the use of "helper" vCPUs that may jump from one host processor
to another. Those will be very happy to trigger a synchronize_rcu(), and
the effect on performance is quite the disaster.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4
dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS
letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI
1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+
t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW
ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig==
=lWpE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
Highlights:
- alienware-wmi: WMAX thermal interface support
- amd/hsmp: Split ACPI and platform device based drivers
- amd/x3d_vcache: X3D frequency/cache mode switching support
- asus-wmi: Thermal policy fixes
- intel/pmt: Disable C1 auto-demotion in suspend to allow
entering the deepest C-states
- intel-hid: Fix volume buttons on Thinkpad X12 Detachable
Tablet Gen 1
- intel_scu_ipc: Replace "workaround" with 32-bit IO
- panasonic-laptop: Correct *_show() function error handling
- p2sb: Gemini Lake P2SB devfn correction
- think-lmi: Admin/System certificate authentication support
- wmi: Disable WMI devices for shutdown, refactoring
continues
- x86-android-tablets: Vexia EDU ATLA 10 tablet support
- platform/surface: Surface Pro 9 5G (Arm/QCOM) support
- Miscellaneous cleanups / refactoring / improvements
Expected conflicts:
- hsmp driver split into two vs constifying bin_attribute [1]
[1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/
The following is an automated shortlog grouped by driver:
alienware-wmi:
- added force module parameters
- added platform profile support
- Adds support to Alienware x17 R2
- alienware_wmax_command() is now input size agnostic
- create_thermal_profile() no longer brute-forces IDs
- extends the list of supported models
- fixed indentation and clean up
- Fix spelling mistake "requieres" -> "requires"
- order alienware_quirks[] alphabetically
- WMAX interface documentation
amd: amd_3d_vcache:
- Add AMD 3D V-Cache optimizer driver
- Add sysfs ABI documentation
amd/hsmp:
- Add new error code and error logs
- Change generic plat_dev name to hsmp_pdev
- Change the error type
- Convert amd_hsmp_rdwr() to a function pointer
- Create hsmp/ directory
- Create separate ACPI, plat and common drivers
- Create wrapper function init_acpi()
- Make hsmp_pdev static instead of global
- mark hsmp_msg_desc_table[] as maybe_unused
- Move ACPI code to acpi.c
- Move platform device specific code to plat.c
- Move structure and macros to header file
- Use dev_groups in the driver structure
- Use name space while exporting module symbols
amd/pmf:
- Switch to platform_get_resource() and devm_ioremap_resource()
- Use dev_err_probe() to simplify error handling
asus-laptop:
- prefer strscpy() over strcpy()
asus-wmi:
- Fix inconsistent use of thermal policies
- Use platform_profile_cycle()
classmate-laptop:
- Replace snprintf in show functions with sysfs_emit
compal-laptop:
- use sysfs_emit() instead of sprintf()
dell-dcdbase:
- Replace snprintf in show functions with sysfs_emit
Documentation: alienware-wmi:
- Describe THERMAL_INFORMATION operation 0x02
eeepc-laptop:
- use sysfs_emit() instead of sprintf()
hp: hp-bioscfg:
- remove redundant if statement
intel:
- Add 'intel' prefix to the modules automatically
intel-hid:
- fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
intel/pmc:
- Disable C1 auto-demotion during suspend
- Refactor platform resume functions to use cnl_resume()
intel/pmt:
- allow user offset for PMT callbacks
- Correct the typo 'ACCCESS_LOCAL'
intel_scu_ipc:
- Convert to check for errors first
- Don't use "proxy" headers
- Replace workaround by 32-bit IO
- Save a copy of the entire struct intel_scu_ipc_data
- Simplify code with cleanup helpers
- Unify the flow in pwr_reg_rdwr()
intel/vsec:
- Remove a useless mutex
MAINTAINERS:
- adjust file entry in INTEL TPMI DRIVER
- Change AMD PMF driver status to "Supported"
- Update ISHTP ECLITE maintainer entry
p2sb:
- Cache correct PCI bar for P2SB on Gemini Lake
panasonic-laptop:
- Return errno correctly in show callback
surface: aggregator_registry:
- Add Surface Pro 9 5G
Switch back to struct platform_driver::
- remove()
think-lmi:
- Add certificate as mechanism
- Allow empty admin password
- improve check if BIOS account security enabled
- Multi-certificate support
wmi:
- Implement proper shutdown handling
- Introduce to_wmi_driver()
- Remove wmi_block_list
- Replace dev_to_wdev() with to_wmi_device()
x86: acer-wmi:
- remove unused macros
x86-android-tablets:
- Add get_i2c_adap_by_handle() helper
- Add support for getting i2c_adapter by PCI parent devname()
- Add support for Vexia EDU ATLA 10 tablet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO
McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB
4BkujKwqo3cdGNPjIBy41jnNjekNsw8=
=QEd2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- alienware WMAX thermal interface support
- Split ACPI and platform device based amd/hsmp drivers
- AMD X3D frequency/cache mode switching support
- asus thermal policy fixes
- Disable C1 auto-demotion in suspend to allow entering the deepest
C-states
- Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
- Replace intel_scu_ipc "workaround" with 32-bit IO
- Correct *_show() function error handling in panasonic-laptop
- Gemini Lake P2SB devfn correction
- think-lmi Admin/System certificate authentication support
- Disable WMI devices for shutdown, refactoring continues
- Vexia EDU ATLA 10 tablet support
- Surface Pro 9 5G (Arm/QCOM) support
- Misc cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits)
platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake
platform/x86: panasonic-laptop: Return errno correctly in show callback
Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02
alienware-wmi: create_thermal_profile() no longer brute-forces IDs
alienware-wmi: Adds support to Alienware x17 R2
alienware-wmi: extends the list of supported models
alienware-wmi: order alienware_quirks[] alphabetically
platform/x86/intel/pmt: allow user offset for PMT callbacks
platform/x86/amd/hsmp: Change the error type
platform/x86/amd/hsmp: Add new error code and error logs
platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation
platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver
intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1
platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused
platform/x86: asus-wmi: Use platform_profile_cycle()
platform/x86: asus-wmi: Fix inconsistent use of thermal policies
platform/x86: hp: hp-bioscfg: remove redundant if statement
MAINTAINERS: Update ISHTP ECLITE maintainer entry
platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet
platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname()
...
report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info without
adding vendor-specific fields to struct mce
- Cleanups
-----BEGIN PGP SIGNATURE-----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=djpG
-----END PGP SIGNATURE-----
Merge tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Log and handle twp new AMD-specific MCA registers: SYND1 and SYND2
and report the Field Replaceable Unit text info reported through them
- Add support for handling variable-sized SMCA BERT records
- Add the capability for reporting vendor-specific RAS error info
without adding vendor-specific fields to struct mce
- Cleanups
* tag 'ras_core_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/mce_amd: Add support for FRU text in MCA
x86/mce/apei: Handle variable SMCA BERT record size
x86/MCE/AMD: Add support for new MCA_SYND{1,2} registers
tracing: Add __print_dynamic_array() helper
x86/mce: Add wrapper for struct mce to export vendor specific info
x86/mce/intel: Use MCG_BANKCNT_MASK instead of 0xff
x86/mce/mcelog: Use xchg() to get and clear the flags
After the file got split, there are now W=1 warnings for users that
include it without referencing hsmp_msg_desc_table:
In file included from arch/x86/include/asm/amd_hsmp.h:6,
from drivers/platform/x86/amd/hsmp/plat.c:12:
arch/x86/include/uapi/asm/amd_hsmp.h:91:35: error: 'hsmp_msg_desc_table' defined but not used [-Werror=unused-const-variable=]
91 | static const struct hsmp_msg_desc hsmp_msg_desc_table[] = {
| ^~~~~~~~~~~~~~~~~~~
Mark it as __attribute__((maybe_unused)) to shut up the warning but
keep it in the file in case it is used from userland. The __maybe_unused
shorthand unfortunately isn't available in userspace, so this has to
be the long form.
While it is not envisioned a normal userspace program could benefit
from having this table as part of UAPI, it seems there is non-zero
chance this array is used by some userspace tests so it is retained for
now (see the Link below).
Fixes: e47c018a0e ("platform/x86/amd/hsmp: Move platform device specific code to plat.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/platform-driver-x86/CAPhsuW7mDRswhVjYf+4iinO+sph_rQ1JykEof+apoiSOVwOXXQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241028163553.2452486-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a quirk to control KVM's misguided initialization of select feature
MSRs to KVM's max configuration, as enabling features by default violates
KVM's approach of letting userspace own the vCPU model, and is actively
problematic for MSRs that are conditionally supported, as the vCPU will
end up with an MSR value that userspace can't restore. E.g. if the vCPU
is configured with PDCM=0, userspace will save and attempt to restore a
non-zero PERF_CAPABILITIES, thanks to KVM's meddling.
Link: https://lore.kernel.org/r/20240802185511.305849-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Starting with Zen4, AMD's Scalable MCA systems incorporate two new registers:
MCA_SYND1 and MCA_SYND2.
These registers will include supplemental error information in addition to the
existing MCA_SYND register. The data within these registers is considered
valid if MCA_STATUS[SyndV] is set.
Userspace error decoding tools like rasdaemon gather related hardware error
information through the tracepoints.
Therefore, export these two registers through the mce_record tracepoint so
that tools like rasdaemon can parse them and output the supplemental error
information like FRU text contained in them.
[ bp: Massage. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20241022194158.110073-4-avadhut.naik@amd.com
In preparation for adding arm64 GCS support make the map_shadow_stack()
SHADOW_STACK_SET_TOKEN flag generic and add _SET_MARKER. The existing
flag indicates that a token usable for stack switch should be added to
the top of the newly mapped GCS region while the new flag indicates that
a top of stack marker suitable for use by unwinders should be added
above that.
For arm64 the top of stack marker is all bits 0.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-5-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or deleted.
The former does not have particularly noticeable overhead, but Intel's
TDX will require the guest to re-accept private pages if they are
dropped from the secure EPT, which is a non starter. Actually,
the only reason why this is not already being done is a bug which
was never fully investigated and caused VM instability with assigned
GeForce GPUs, so allow userspace to opt into the new behavior.
* Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
* Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
* Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value at the ICR offset.
* Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
* Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
* Fix a WARN caused by RSM entering a nested guest from SMM with invalid guest
state, by forcing the vCPU out of guest mode prior to signalling SHUTDOWN
(the SHUTDOWN hits the VM altogether, not the nested guest)
* Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
* Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
* Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding multi generation LRU support in KVM.
* Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
* Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
* Remove unnecessary accounting of temporary nested VMCB related allocations.
* Set FINAL/PAGE in the page fault error code for EPT violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
* Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
* Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
* Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
* Minor SGX fix and a cleanup.
* Misc cleanups
Generic:
* Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
* Enable virtualization when KVM is loaded, not right before the first VM
is created. Together with the previous change, this simplifies a
lot the logic of the callbacks, because their very existence implies
virtualization is enabled.
* Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
* Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
Selftests:
* Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
* Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
* Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
* Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
* Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb201AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOM1gf+Ij7dpCh0KwoNYlHfW2aCHAv3PqQd
cKMDSGxoCernbJEyPO/3qXNUK+p4zKedk3d92snW3mKa+cwxMdfthJ3i9d7uoNiw
7hAgcfKNHDZGqAQXhx8QcVF3wgp+diXSyirR+h1IKrGtCCmjMdNC8ftSYe6voEkw
VTVbLL+tER5H0Xo5UKaXbnXKDbQvWLXkdIqM8dtLGFGLQ2PnF/DdMP0p6HYrKf1w
B7LBu0rvqYDL8/pS82mtR3brHJXxAr9m72fOezRLEUbfUdzkTUi/b1vEe6nDCl0Q
i/PuFlARDLWuetlR0VVWKNbop/C/l4EmwCcKzFHa+gfNH3L9361Oz+NzBw==
=Q7kz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
Introduce the quirk KVM_X86_QUIRK_SLOT_ZAP_ALL to allow users to select
KVM's behavior when a memslot is moved or deleted for KVM_X86_DEFAULT_VM
VMs. Make sure KVM behave as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs.
The KVM_X86_QUIRK_SLOT_ZAP_ALL quirk offers two behavior options:
- when enabled: Invalidate/zap all SPTEs ("zap-all"),
- when disabled: Precisely zap only the leaf SPTEs within the range of the
moving/deleting memory slot ("zap-slot-leafs-only").
"zap-all" is today's KVM behavior to work around a bug [1] where the
changing the zapping behavior of memslot move/deletion would cause VM
instability for VMs with an Nvidia GPU assigned; while
"zap-slot-leafs-only" allows for more precise zapping of SPTEs within the
memory slot range, improving performance in certain scenarios [2], and
meeting the functional requirements for TDX.
Previous attempts to select "zap-slot-leafs-only" include a per-VM
capability approach [3] (which was not preferred because the root cause of
the bug remained unidentified) and a per-memslot flag approach [4]. Sean
and Paolo finally recommended the implementation of this quirk and
explained that it's the least bad option [5].
By default, the quirk is enabled on KVM_X86_DEFAULT_VM VMs to use
"zap-all". Users have the option to disable the quirk to select
"zap-slot-leafs-only" for specific KVM_X86_DEFAULT_VM VMs that are
unaffected by this bug.
For non-KVM_X86_DEFAULT_VM VMs, the "zap-slot-leafs-only" behavior is
always selected without user's opt-in, regardless of if the user opts for
"zap-all".
This is because it is assumed until proven otherwise that non-
KVM_X86_DEFAULT_VM VMs will not be exposed to the bug [1], and most
importantly, it's because TDX must have "zap-slot-leafs-only" always
selected. In TDX's case a memslot's GPA range can be a mixture of "private"
or "shared" memory. Shared is roughly analogous to how EPT is handled for
normal VMs, but private GPAs need lots of special treatment:
1) "zap-all" would require to zap private root page or non-leaf entries or
at least leaf-entries beyond the deleting memslot scope. However, TDX
demands that the root page of the private page table remains unchanged,
with leaf entries being zapped before non-leaf entries, and any dropped
private guest pages must be re-accepted by the guest.
2) if "zap-all" zaps only shared page tables, it would result in private
pages still being mapped when the memslot is gone. This may affect even
other processes if later the gmem fd was whole punched, causing the
pages being freed on the host while still mapped in the TD, because
there's no pgoff to the gfn information to zap the private page table
after memslot is gone.
So, simply go "zap-slot-leafs-only" as if the quirk is always disabled for
non-KVM_X86_DEFAULT_VM VMs to avoid manual opt-in for every VM type [6] or
complicating quirk disabling interface (current quirk disabling interface
is limited, no way to query quirks, or force them to be disabled).
Add a new function kvm_mmu_zap_memslot_leafs() to implement
"zap-slot-leafs-only". This function does not call kvm_unmap_gfn_range(),
bypassing special handling to APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, as
1) The APIC_ACCESS_PAGE_PRIVATE_MEMSLOT cannot be created by users, nor can
it be moved. It is only deleted by KVM when APICv is permanently
inhibited.
2) kvm_vcpu_reload_apic_access_page() effectively does nothing when
APIC_ACCESS_PAGE_PRIVATE_MEMSLOT is deleted.
3) Avoid making all cpus request of KVM_REQ_APIC_PAGE_RELOAD can save on
costly IPIs.
Suggested-by: Kai Huang <kai.huang@intel.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com [1]
Link: https://patchwork.kernel.org/project/kvm/patch/20190205210137.1377-11-sean.j.christopherson@intel.com/#25054908 [2]
Link: https://lore.kernel.org/kvm/20200713190649.GE29725@linux.intel.com/T/#mabc0119583dacf621025e9d873c85f4fbaa66d5c [3]
Link: https://lore.kernel.org/all/20240515005952.3410568-3-rick.p.edgecombe@intel.com [4]
Link: https://lore.kernel.org/all/7df9032d-83e4-46a1-ab29-6c7973a2ab0b@redhat.com [5]
Link: https://lore.kernel.org/all/ZnGa550k46ow2N3L@google.com [6]
Co-developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021043.13881-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new .note section containing type, size, offset and flags of every
xfeature that is present.
This information will be used by debuggers to understand the XSAVE layout of
the machine where the core file has been dumped, and to read XSAVE registers,
especially during cross-platform debugging.
The XSAVE layouts of modern AMD and Intel CPUs differ, especially since
Memory Protection Keys and the AVX-512 features have been inculcated into
the AMD CPUs.
Since AMD never adopted (and hence never left room in the XSAVE layout for)
the Intel MPX feature, tools like GDB had assumed a fixed XSAVE layout
matching that of Intel (based on the XCR0 mask).
Hence, core dumps from AMD CPUs didn't match the known size for the XCR0 mask.
This resulted in GDB and other tools not being able to access the values of
the AVX-512 and PKRU registers on AMD CPUs.
To solve this, an interim solution has been accepted into GDB, and is already
a part of GDB 14, see
https://sourceware.org/pipermail/gdb-patches/2023-March/198081.html.
But it depends on heuristics based on the total XSAVE register set size
and the XCR0 mask to infer the layouts of the various register blocks
for core dumps, and hence, is not a foolproof mechanism to determine the
layout of the XSAVE area.
Therefore, add a new core dump note in order to allow GDB/LLDB and other
relevant tools to determine the layout of the XSAVE area of the machine where
the corefile was dumped.
The new core dump note (which is being proposed as a per-process .note
section), NT_X86_XSAVE_LAYOUT (0x205) contains an array of structures.
Each structure describes an individual extended feature containing
offset, size and flags in this format:
struct x86_xfeat_component {
u32 type;
u32 size;
u32 offset;
u32 flags;
};
and in an independent manner, allowing for future extensions without depending
on hw arch specifics like CPUID etc.
[ bp: Massage commit message, zap trailing whitespace. ]
Co-developed-by: Jini Susan George <jinisusan.george@amd.com>
Signed-off-by: Jini Susan George <jinisusan.george@amd.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Vignesh Balasubramanian <vigbalas@amd.com>
Link: https://lore.kernel.org/r/20240725161017.112111-2-vigbalas@amd.com
* Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
* Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
* Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of
the protocol
* FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
* New command-line parameter to control the WFx trap behavior under KVM
* Introduce kCFI hardening in the EL2 hypervisor
* Fixes + cleanups for handling presence/absence of FEAT_TCRX
* Miscellaneous fixes + documentation updates
LoongArch:
* Add paravirt steal time support.
* Add support for KVM_DIRTY_LOG_INITIALLY_SET.
* Add perf kvm-stat support for loongarch.
RISC-V:
* Redirect AMO load/store access fault traps to guest
* perf kvm stat support
* Use guest files for IMSIC virtualization, when available
ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA
extensions is coming through the RISC-V tree.
s390:
* Assortment of tiny fixes which are not time critical
x86:
* Fixes for Xen emulation.
* Add a global struct to consolidate tracking of host values, e.g. EFER
* Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
* Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
* Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
* Drop MTRR virtualization, and instead always honor guest PAT on CPUs
that support self-snoop.
* Update to the newfangled Intel CPU FMS infrastructure.
* Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads
'0' and writes from userspace are ignored.
* Misc cleanups
x86 - MMU:
* Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support.
* Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't
hold leafs SPTEs.
* Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager
page splitting, to avoid stalling vCPUs when splitting huge pages.
* Bug the VM instead of simply warning if KVM tries to split a SPTE that is
non-present or not-huge. KVM is guaranteed to end up in a broken state
because the callers fully expect a valid SPTE, it's all but dangerous
to let more MMU changes happen afterwards.
x86 - AMD:
* Make per-CPU save_area allocations NUMA-aware.
* Force sev_es_host_save_area() to be inlined to avoid calling into an
instrumentable function from noinstr code.
* Base support for running SEV-SNP guests. API-wise, this includes
a new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated pages
before mapping them into guest private memory ranges.
This includes basic support for attestation guest requests, enough to
say that KVM supports the GHCB 2.0 specification.
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys. To support
fetching certificate data from userspace, a new KVM exit type will be
needed to handle fetching the certificate from userspace. An attempt to
define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle
this was introduced in v1 of this patchset, but is still being discussed
by community, so for now this patchset only implements a stub version
of SNP Extended Guest Requests that does not provide certificate data.
x86 - Intel:
* Remove an unnecessary EPT TLB flush when enabling hardware.
* Fix a series of bugs that cause KVM to fail to detect nested pending posted
interrupts as valid wake eents for a vCPU executing HLT in L2 (with
HLT-exiting disable by L1).
* KVM: x86: Suppress MMIO that is triggered during task switch emulation
Explicitly suppress userspace emulated MMIO exits that are triggered when
emulating a task switch as KVM doesn't support userspace MMIO during
complex (multi-step) emulation. Silently ignoring the exit request can
result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to
userspace for some other reason prior to purging mmio_needed.
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write exits if
emulator detects exception") for more details on KVM's limitations with
respect to emulated MMIO during complex emulator flows.
Generic:
* Rename the AS_UNMOVABLE flag that was introduced for KVM to AS_INACCESSIBLE,
because the special casing needed by these pages is not due to just
unmovability (and in fact they are only unmovable because the CPU cannot
access them).
* New ioctl to populate the KVM page tables in advance, which is useful to
mitigate KVM page faults during guest boot or after live migration.
The code will also be used by TDX, but (probably) not through the ioctl.
* Enable halt poll shrinking by default, as Intel found it to be a clear win.
* Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
* Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
* Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
* Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
Selftests:
* Remove dead code in the memslot modification stress test.
* Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
* Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
* Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaZQB0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkZwf/bv2jiENaLFNGPe/VqTKMQ6PHQLMG
+sNHx6fJPP35gTM8Jqf0/7/ummZXcSuC1mWrzYbecZm7Oeg3vwNXHZ4LquwwX6Dv
8dKcUzLbWDAC4WA3SKhi8C8RV2v6E7ohy69NtAJmFWTc7H95dtIQm6cduV2osTC3
OEuHe1i8d9umk6couL9Qhm8hk3i9v2KgCsrfyNrQgLtS3hu7q6yOTR8nT0iH6sJR
KE5A8prBQgLmF34CuvYDw4Hu6E4j+0QmIqodovg2884W1gZQ9LmcVqYPaRZGsG8S
iDdbkualLKwiR1TpRr3HJGKWSFdc7RblbsnHRvHIZgFsMQiimh4HrBSCyQ==
=zepX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit 0dc902267c ("KVM: x86: Suppress pending MMIO write
exits if emulator detects exception") for more details on KVM's
limitations with respect to emulated MMIO during complex emulator
flows
Generic:
- Rename the AS_UNMOVABLE flag that was introduced for KVM to
AS_INACCESSIBLE, because the special casing needed by these pages
is not due to just unmovability (and in fact they are only
unmovable because the CPU cannot access them)
- New ioctl to populate the KVM page tables in advance, which is
useful to mitigate KVM page faults during guest boot or after live
migration. The code will also be used by TDX, but (probably) not
through the ioctl
- Enable halt poll shrinking by default, as Intel found it to be a
clear win
- Setup empty IRQ routing when creating a VM to avoid having to
synchronize SRCU when creating a split IRQCHIP on x86
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with
a flag that arch code can use for hooking both sched_in() and
sched_out()
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace
detect bugs
- Mark a vCPU as preempted if and only if it's scheduled out while in
the KVM_RUN loop, e.g. to avoid marking it preempted and thus
writing guest memory when retrieving guest state during live
migration blackout
Selftests:
- Remove dead code in the memslot modification stress test
- Treat "branch instructions retired" as supported on all AMD Family
17h+ CPUs
- Print the guest pseudo-RNG seed only when it changes, to avoid
spamming the log for tests that create lots of VMs
- Make the PMU counters test less flaky when counting LLC cache
misses by doing CLFLUSH{OPT} in every loop iteration"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
crypto: ccp: Add the SNP_VLEK_LOAD command
KVM: x86/pmu: Add kvm_pmu_call() to simplify static calls of kvm_pmu_ops
KVM: x86: Introduce kvm_x86_call() to simplify static calls of kvm_x86_ops
KVM: x86: Replace static_call_cond() with static_call()
KVM: SEV: Provide support for SNP_EXTENDED_GUEST_REQUEST NAE event
x86/sev: Move sev_guest.h into common SEV header
KVM: SEV: Provide support for SNP_GUEST_REQUEST NAE event
KVM: x86: Suppress MMIO that is triggered during task switch emulation
KVM: x86/mmu: Clean up make_huge_page_split_spte() definition and intro
KVM: x86/mmu: Bug the VM if KVM tries to split a !hugepage SPTE
KVM: selftests: x86: Add test for KVM_PRE_FAULT_MEMORY
KVM: x86: Implement kvm_arch_vcpu_pre_fault_memory()
KVM: x86/mmu: Make kvm_mmu_do_page_fault() return mapped level
KVM: x86/mmu: Account pf_{fixed,emulate,spurious} in callers of "do page fault"
KVM: x86/mmu: Bump pf_taken stat only in the "real" page fault handler
KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory
KVM: Document KVM_PRE_FAULT_MEMORY ioctl
mm, virt: merge AS_UNMOVABLE and AS_INACCESSIBLE
perf kvm: Add kvm-stat for loongarch64
LoongArch: KVM: Add PV steal time support in guest side
...
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
When a vCPU is interrupted by a signal while running a nested guest,
KVM will exit to userspace with L2 state. However, userspace has no
way to know whether it sees L1 or L2 state (besides calling
KVM_GET_STATS_FD, which does not have a stable ABI).
This causes multiple problems:
The simplest one is L2 state corruption when userspace marks the sregs
as dirty. See this mailing list thread [1] for a complete discussion.
Another problem is that if userspace decides to continue by emulating
instructions, it will unknowingly emulate with L2 state as if L1
doesn't exist, which can be considered a weird guest escape.
Introduce a new flag, KVM_RUN_X86_GUEST_MODE, in the kvm_run data
structure, which is set when the vCPU exited while running a nested
guest. Also introduce a new capability, KVM_CAP_X86_GUEST_MODE, to
advertise the functionality to userspace.
[1] https://lore.kernel.org/kvm/20240416123558.212040-1-julian.stecklina@cyberus-technology.de/T/#m280aadcb2e10ae02c191a7dc4ed4b711a74b1f55
Signed-off-by: Thomas Prescher <thomas.prescher@cyberus-technology.de>
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Link: https://lore.kernel.org/r/20240508132502.184428-1-julian.stecklina@cyberus-technology.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
The SVSM Calling Area (CA) is used to communicate between Linux and the
SVSM. Since the firmware supplied CA for the BSP is likely to be in
reserved memory, switch off that CA to a kernel provided CA so that access
and use of the CA is available during boot. The CA switch is done using
the SVSM core protocol SVSM_CORE_REMAP_CA call.
An SVSM call is executed by filling out the SVSM CA and setting the proper
register state as documented by the SVSM protocol. The SVSM is invoked by
by requesting the hypervisor to run VMPL0.
Once it is safe to allocate/reserve memory, allocate a CA for each CPU.
After allocating the new CAs, the BSP will switch from the boot CA to the
per-CPU CA. The CA for an AP is identified to the SVSM when creating the
VMSA in preparation for booting the AP.
[ bp: Heavily simplify svsm_issue_call() asm, other touchups. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/fa8021130bcc3bcf14d722a25548cb0cdf325456.1717600736.git.thomas.lendacky@amd.com
Add a KVM_SEV_SNP_LAUNCH_FINISH command to finalize the cryptographic
launch digest which stores the measurement of the guest at launch time.
Also extend the existing SNP firmware data structures to support
disabling the use of Versioned Chip Endorsement Keys (VCEK) by guests as
part of this command.
While finalizing the launch flow, the code also issues the LAUNCH_UPDATE
SNP firmware commands to encrypt/measure the initial VMSA pages for each
configured vCPU, which requires setting the RMP entries for those pages
to private, so also add handling to clean up the RMP entries for these
pages whening freeing vCPUs during shutdown.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-8-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A key aspect of a launching an SNP guest is initializing it with a
known/measured payload which is then encrypted into guest memory as
pre-validated private pages and then measured into the cryptographic
launch context created with KVM_SEV_SNP_LAUNCH_START so that the guest
can attest itself after booting.
Since all private pages are provided by guest_memfd, make use of the
kvm_gmem_populate() interface to handle this. The general flow is that
guest_memfd will handle allocating the pages associated with the GPA
ranges being initialized by each particular call of
KVM_SEV_SNP_LAUNCH_UPDATE, copying data from userspace into those pages,
and then the post_populate callback will do the work of setting the
RMP entries for these pages to private and issuing the SNP firmware
calls to encrypt/measure them.
For more information see the SEV-SNP specification.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-7-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_SEV_SNP_LAUNCH_START begins the launch process for an SEV-SNP guest.
The command initializes a cryptographic digest context used to construct
the measurement of the guest. Other commands can then at that point be
used to load/encrypt data into the guest's initial launch image.
For more information see the SEV-SNP specification.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Message-ID: <20240501085210.2213060-6-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV-SNP builds upon existing SEV and SEV-ES functionality while adding
new hardware-based security protection. SEV-SNP adds strong memory
encryption and integrity protection to help prevent malicious
hypervisor-based attacks such as data replay, memory re-mapping, and
more, to create an isolated execution environment.
Define a new KVM_X86_SNP_VM type which makes use of these capabilities
and extend the KVM_SEV_INIT2 ioctl to support it. Also add a basic
helper to check whether SNP is enabled and set PFERR_PRIVATE_ACCESS for
private #NPFs so they are handled appropriately by KVM MMU.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240501085210.2213060-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GHCB protocol version may be different from one guest to the next.
Add a field to track it for each KVM instance and extend KVM_SEV_INIT2
to allow it to be configured by userspace.
Now that all SEV-ES support for GHCB protocol version 2 is in place, go
ahead and default to it when creating SEV-ES guests through the new
KVM_SEV_INIT2 interface. Keep the older KVM_SEV_ES_INIT interface
restricted to GHCB protocol version 1.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240501071048.2208265-5-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The idea that no parameter would ever be necessary when enabling SEV or
SEV-ES for a VM was decidedly optimistic. In fact, in some sense it's
already a parameter whether SEV or SEV-ES is desired. Another possible
source of variability is the desired set of VMSA features, as that affects
the measurement of the VM's initial state and cannot be changed
arbitrarily by the hypervisor.
Create a new sub-operation for KVM_MEMORY_ENCRYPT_OP that can take a struct,
and put the new op to work by including the VMSA features as a field of the
struct. The existing KVM_SEV_INIT and KVM_SEV_ES_INIT use the full set of
supported VMSA features for backwards compatibility.
The struct also includes the usual bells and whistles for future
extensibility: a flags field that must be zero for now, and some padding
at the end.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compute the set of features to be stored in the VMSA when KVM is
initialized; move it from there into kvm_sev_info when SEV is initialized,
and then into the initial VMSA.
The new variable can then be used to return the set of supported features
to userspace, via the KVM_GET_DEVICE_ATTR ioctl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-ID: <20240404121327.3107131-6-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The data structs for KVM_MEMORY_ENCRYPT_OP have different sizes for 32- and 64-bit
userspace, but they do not make any attempt to convert from one ABI to the other
when 32-bit userspace is running on 64-bit kernels. This configuration never
worked, and SEV is only for 64-bit kernels so we're not breaking ABI on 32-bit
kernels.
Fix this by adding the appropriate padding; no functional change intended
for 64-bit userspace.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Delete kvm_vcpu_pv_apf_data.enabled to fix a goof in KVM's async #PF ABI where
the enabled field pushes the size of "struct kvm_vcpu_pv_apf_data" from 64 to
68 bytes, i.e. beyond a single cache line.
The enabled field is purely a guest-side flag that Linux-as-a-guest uses to
track whether or not the guest has enabled async #PF support. The actual flag
that is passed to the host, i.e. to KVM proper, is a single bit in a synthetic
MSR, MSR_KVM_ASYNC_PF_EN, i.e. is in a location completely unrelated to the
shared kvm_vcpu_pv_apf_data structure.
Simply drop the the field and use a dedicated guest-side per-CPU variable to
fix the ABI, as opposed to fixing the documentation to match reality. KVM has
never consumed kvm_vcpu_pv_apf_data.enabled, so the odds of the ABI change
breaking anything are extremely low.
-----BEGIN PGP SIGNATURE-----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=3ujw
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-asyncpf_abi-6.9' of https://github.com/kvm-x86/linux into HEAD
Guest-side KVM async #PF ABI cleanup for 6.9
Delete kvm_vcpu_pv_apf_data.enabled to fix a goof in KVM's async #PF ABI where
the enabled field pushes the size of "struct kvm_vcpu_pv_apf_data" from 64 to
68 bytes, i.e. beyond a single cache line.
The enabled field is purely a guest-side flag that Linux-as-a-guest uses to
track whether or not the guest has enabled async #PF support. The actual flag
that is passed to the host, i.e. to KVM proper, is a single bit in a synthetic
MSR, MSR_KVM_ASYNC_PF_EN, i.e. is in a location completely unrelated to the
shared kvm_vcpu_pv_apf_data structure.
Simply drop the the field and use a dedicated guest-side per-CPU variable to
fix the ABI, as opposed to fixing the documentation to match reality. KVM has
never consumed kvm_vcpu_pv_apf_data.enabled, so the odds of the ABI change
breaking anything are extremely low.
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:
38b334fc76 Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Linus has resolved the conflicting placement of 'cc_mask' better
than the original commit:
1c811d403a x86/sev: Fix position dependent variable references in startup code
... which was also done by an internal merge resolution:
2e5fc4786b Merge branch 'x86/sev' into x86/boot, to resolve conflicts and to pick up dependent tree
But Linus is right in 38b334fc76, the 'cc_mask' declaration is sufficient
within the #ifdef CONFIG_ARCH_HAS_CC_PLATFORM block.
So instead of forcing Linus to do the same resolution again, merge in Linus's
tree and follow his conflict resolution.
Conflicts:
arch/x86/include/asm/coco.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The early SME/SEV code parses the command line very early, in order to
decide whether or not memory encryption should be enabled, which needs
to occur even before the initial page tables are created.
This is problematic for a number of reasons:
- this early code runs from the 1:1 mapping provided by the decompressor
or firmware, which uses a different translation than the one assumed by
the linker, and so the code needs to be built in a special way;
- parsing external input while the entire kernel image is still mapped
writable is a bad idea in general, and really does not belong in
security minded code;
- the current code ignores the built-in command line entirely (although
this appears to be the case for the entire decompressor)
Given that the decompressor/EFI stub is an intrinsic part of the x86
bootable kernel image, move the command line parsing there and out of
the core kernel. This removes the need to build lib/cmdline.o in a
special way, or to use RIP-relative LEA instructions in inline asm
blocks.
This involves a new xloadflag in the setup header to indicate
that mem_encrypt=on appeared on the kernel command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240227151907.387873-17-ardb+git@google.com
If the guest does not explicitly set the GPA of vcpu_info structure in
memory then, for guests with 32 vCPUs or fewer, the vcpu_info embedded
in the shared_info page may be used. As described in a previous commit,
the shared_info page is an overlay at a fixed HVA within the VMM, so in
this case it also more optimal to activate the vcpu_info cache with a
fixed HVA to avoid unnecessary invalidation if the guest memory layout
is modified.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-14-paul@xen.org
[sean: use kvm_gpc_is_{gpa,hva}_active()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The shared_info page is not guest memory as such. It is a dedicated page
allocated by the VMM and overlaid onto guest memory in a GFN chosen by the
guest and specified in the XENMEM_add_to_physmap hypercall. The guest may
even request that shared_info be moved from one GFN to another by
re-issuing that hypercall, but the HVA is never going to change.
Because the shared_info page is an overlay the memory slots need to be
updated in response to the hypercall. However, memory slot adjustment is
not atomic and, whilst all vCPUs are paused, there is still the possibility
that events may be delivered (which requires the shared_info page to be
updated) whilst the shared_info GPA is absent. The HVA is never absent
though, so it makes much more sense to use that as the basis for the
kernel's mapping.
Hence add a new KVM_XEN_ATTR_TYPE_SHARED_INFO_HVA attribute type for this
purpose and a KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA flag to advertize its
availability. Don't actually advertize it yet though. That will be done in
a subsequent patch, which will also add tests for the new attribute type.
Also update the KVM API documentation with the new attribute and also fix
it up to consistently refer to 'shared_info' (with the underscore).
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-13-paul@xen.org
[sean: store "hva" as a user pointer, use kvm_gpc_is_{gpa,hva}_active()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since all architectures (for historical reasons) have to define
struct kvm_guest_debug_arch, and since userspace has to check
KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is
no advantage in masking the capability #define itself. Remove
the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific
headers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask
unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however
was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on
architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly
return nonzero. This however does not make sense, and it prevented userspace
from supporting this architecture-independent feature without recompilation.
Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and
is only used in virt/kvm/kvm_main.c. Userspace does not need to test it
and there should be no need for it to exist. Remove it and replace it
with a Kconfig symbol within Linux source code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several capabilities that exist only on x86 nevertheless have their
structs defined in include/uapi/linux/kvm.h. Move them to
arch/x86/include/uapi/asm/kvm.h for cleanliness.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change uapi header uses of GENMASK to instead use the uapi/linux/bits.h bit
macros, since GENMASK is not defined in uapi headers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change uapi header uses of BIT to instead use the uapi/linux/const.h bit
macros, since BIT is not defined in uapi headers.
The PMU mask uses _BITUL since it targets a 32 bit flag field, whereas
the longmode definition is meant for a 64 bit flag field.
Cc: Sean Christophersen <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Message-Id: <20231207001142.3617856-1-dionnaglaze@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refer to commit fd10cde929 ("KVM paravirt: Add async PF initialization
to PV guest") and commit 344d9588a9 ("KVM: Add PV MSR to enable
asynchronous page faults delivery"). It turns out that at the time when
asyncpf was introduced, the purpose was defining the shared PV data 'struct
kvm_vcpu_pv_apf_data' with the size of 64 bytes. However, it made a mistake
and defined the size to 68 bytes, which failed to make fit in a cache line
and made the code inconsistent with the documentation.
Below justification quoted from Sean[*]
KVM (the host side) has *never* read kvm_vcpu_pv_apf_data.enabled, and
the documentation clearly states that enabling is based solely on the
bit in the synthetic MSR.
So rather than update the documentation, fix the goof by removing the
enabled filed and use the separate percpu variable instread.
KVM-as-a-host obviously doesn't enforce anything or consume the size,
and changing the header will only affect guests that are rebuilt against
the new header, so there's no chance of ABI breakage between KVM and its
guests. The only possible breakage is if some other hypervisor is
emulating KVM's async #PF (LOL) and relies on the guest to set
kvm_vcpu_pv_apf_data.enabled. But (a) I highly doubt such a hypervisor
exists, (b) that would arguably be a violation of KVM's "spec", and
(c) the worst case scenario is that the guest would simply lose async
#PF functionality.
[*] https://lore.kernel.org/all/ZS7ERnnRqs8Fl0ZF@google.com/T/#u
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20231025055914.1201792-2-xiaoyao.li@intel.com
[sean: use true/false instead of 1/0 for booleans]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add X86_CR4_FRED macro for the FRED bit in %cr4. This bit must not be
changed after initialization, so add it to the pinned CR4 bits.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Shan Kang <shan.kang@intel.com>
Link: https://lore.kernel.org/r/20231205105030.8698-12-xin3.li@intel.com
The type definition of struct pci_setup_rom in <asm/pci.h> requires
struct setup_data from <asm/bootparam.h>. Many drivers include
<linux/pci.h>, but do not use boot parameters. Changes to bootparam.h or
its included header files could easily trigger a large, unnecessary
rebuild of the kernel.
Moving struct setup_data and related code into its own header file
avoids including <asm/bootparam.h> in <asm/pci.h>. Instead include the
new header <asm/screen_data.h> and remove the include statement for
x86_init.h, which is unnecessary but pulls in bootparams.h.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240112095000.8952-2-tzimmermann@suse.de
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
The goal is to get sched.h down to a type only header, so the main thing
happening in this patchset is splitting out various _types.h headers and
dependency fixups, as well as moving some things out of sched.h to
better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies.
Testing - it's been in -next, and fixes from pretty much all
architectures have percolated in - nothing major.
-----BEGIN PGP SIGNATURE-----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=3tyT
-----END PGP SIGNATURE-----
Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU").
The fixup will be done as part of the merge commit, and most of the text
above will become the commit message for the merge.
Pending post-merge work includes:
- hugepage support
- looking into using the restrictedmem framework for guest memory
- introducing a testing mechanism to poison memory, possibly using
the same memory attributes introduced here
- SNP and TDX support
There are two non-KVM patches buried in the middle of this series:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
Add a new x86 VM type, KVM_X86_SW_PROTECTED_VM, to serve as a development
and testing vehicle for Confidential (CoCo) VMs, and potentially to even
become a "real" product in the distant future, e.g. a la pKVM.
The private memory support in KVM x86 is aimed at AMD's SEV-SNP and
Intel's TDX, but those technologies are extremely complex (understatement),
difficult to debug, don't support running as nested guests, and require
hardware that's isn't universally accessible. I.e. relying SEV-SNP or TDX
for maintaining guest private memory isn't a realistic option.
At the very least, KVM_X86_SW_PROTECTED_VM will enable a variety of
selftests for guest_memfd and private memory support without requiring
unique hardware.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-24-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD MI300 MCM provides GET_METRICS_TABLE message to retrieve
all the system management information from SMU.
The metrics table is made available as hexadecimal sysfs binary file
under per socket sysfs directory created at
/sys/devices/platform/amd_hsmp/socket%d/metrics_bin
Metrics table definitions will be documented as part of Public PPR.
The same is defined in the amd_hsmp.h header.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20231010120310.3464066-2-suma.hegde@amd.com
[ij: lseek -> lseek(), dram -> DRAM in dev_err()]
[ij: added period to terminate a documentation sentence]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The arch_calc_vm_prot_bits() macro uses VM_PKEY_BIT0 etc. which are
not part of the UAPI, so the macro is completely useless for userspace.
It is also hidden behind the CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
config switch which we shouldn't expose to userspace. Thus let's move
this macro into a new internal header instead.
Fixes: 8f62c88322 ("x86/mm/pkeys: Add arch-specific VMA protection bits")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20230906162658.142511-1-thuth@redhat.com
CRIU and GDB need to get the current shadow stack and WRSS enablement
status. This information is already available via /proc/pid/status, but
this is inconvenient for CRIU because it involves parsing the text output
in an area of the code where this is difficult. Provide a status
arch_prctl(), ARCH_SHSTK_STATUS for retrieving the status. Have arg2 be a
userspace address, and make the new arch_prctl simply copy the features
out to userspace.
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-43-rick.p.edgecombe%40intel.com
Linus Torvalds