After this patch:
# ./tc_flower_port_range.sh
TEST: Port range matching - IPv4 UDP [ OK ]
TEST: Port range matching - IPv4 TCP [ OK ]
TEST: Port range matching - IPv6 UDP [ OK ]
TEST: Port range matching - IPv6 TCP [ OK ]
TEST: Port range matching - IPv4 UDP Drop [ OK ]
Cc: Qiang Zhang <dtzq01@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test to bpf_offload.py for loading a devbound XDP program in
generic mode, checking that it fails correctly.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250127131344.238147-2-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
Some Makefiles currently override CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
/usr/bin/ld: /tmp/ccd2apay.o: relocation R_X86_64_32 against
`.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/lib/csum] Error 1
openvswitch/Makefile CFLAGS currently do not appear to be used, but
fix it anyway for the case when new tests are introduced in future.
Fixes: 1d0dc857b5 ("selftests: drv-net: add checksum tests")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/3d173603ee258f419d0403363765c9f9494ff79a.1737635092.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
mptcp Makefile currently overrides CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/mptcp/mptcp_sockopt] Error 1
/usr/bin/ld: /tmp/ccqyMVdb.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Fixes: cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/7abc701da9df39c2d6cd15bc3cf9e6cee445cb96.1737621162.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent change to add more cases to XFAIL has a broken regex,
the matching needs a real regex not a glob pattern.
While at it add the cases Willem pointed out during review.
Fixes: 3030e3d57b ("selftests/net: packetdrill: make tcp buf limited timing tests benign")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250121143423.215261-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address Null pointer dereference / undefined behavior in rtattr_pack
(note that size is 0 in the bad case).
Flagged by cppcheck as:
tools/testing/selftests/net/ipsec.c:230:25: warning: Possible null pointer
dereference: payload [nullPointer]
memcpy(RTA_DATA(attr), payload, size);
^
tools/testing/selftests/net/ipsec.c:1618:54: note: Calling function 'rtattr_pack',
4th argument 'NULL' value is 0
if (rtattr_pack(&req.nh, sizeof(req), XFRMA_IF_ID, NULL, 0)) {
^
tools/testing/selftests/net/ipsec.c:230:25: note: Null pointer dereference
memcpy(RTA_DATA(attr), payload, size);
^
Signed-off-by: Liu Ye <liuye@kylinos.cn>
Link: https://patch.msgid.link/20250116013037.29470-1-liuye@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b9d5f5711d ("selftests: net: increase the delay for relative
cmsg_time.sh test") widened the accepted value range 8x but we still
see flakes (at a rate of around 7%).
Return XFAIL for the most timing sensitive test on slow machines.
Before:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '8074us - 7397us < 4000', expected 'OK'
FAIL - 1/36 cases failed
After:
# ./cmsg_time.sh
Case UDPv4 - TXTIME rel returned '1123us - 941us < 500', expected 'OK' (XFAIL)
Case UDPv6 - TXTIME rel returned '1227us - 776us < 500', expected 'OK' (XFAIL)
OK
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250116020105.931338-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running "make kselftest TARGETS=net/forwarding" results in
multiple ccurrences of the same error:
- ./lib.sh: line 787: teamd: command not found
This patch adds the variable $REQUIRE_TEAMD in every test that uses the
command teamd and checks the $REQUIRE_TEAMD variable in the file "lib.sh"
to skip the test if the command is not installed.
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20250114003323.97207-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'du' will print the name of the file, which was already displayed
before, e.g.
Created /tmp/tmp.UOyy0ghfmQ (size 4703740/tmp/tmp.UOyy0ghfmQ) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724/tmp/tmp.xq3zvFinGo) containing data sent by server
'stat' can be used instead, to display this instead:
Created /tmp/tmp.UOyy0ghfmQ (size 4703740 B) containing data sent by client
Created /tmp/tmp.xq3zvFinGo (size 1391724 B) containing data sent by server
So easier to spot the file sizes.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-6-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, we had an issue where getting info about the memory would have
helped better understanding what went wrong.
Let add it just in case for later.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-4-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few MPTCP selftests are using the same code to print stats in case of
error. This code can then be moved to mptcp_lib.sh.
No behaviour changes intended, except to print the error in red and to
stderr, like most error messages.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-3-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the way nstat information is stored in mptcp_connect.sh
and mptcp_join.sh scripts, this patch adds a similar way for
mptcp_sockopt.sh and displays the nstat information when errors
occur.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-2-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to unify what is printed in case of error, similar to what is
done in mptcp_connect.sh and mptcp_join.sh, it is interesting to do the
following modifications in simult_flows.sh:
- Print the rc errors at the end of the line.
- Print the MIB counters.
- Use the same ss options: add -M (MPTCP sockets) and -e (detailed
socket information).
While at it, also print of the 'max' time only in case of success,
because 'mptcp_connect.c' will already print this info in case of error,
e.g.:
transfer slower than expected! runtime 11948 ms, expected 11921 ms
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250114-net-next-mptcp-st-more-debug-err-v1-1-2ffb16a6cf35@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move python code to a separate directory so it can be
packaged as a python module. Updates existing references
in selftests and docs.
Also rename ynl-gen-[c|rst] to ynl_gen_[c|rst], avoid
dashes as these prevent easy imports for entrypoints.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/a4151bad0e6984e7164d395125ce87fd2e048bf1.1736343575.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test listing netdevsim NAPIs before and after a single queue
has been reset (and NAPIs re-added).
Start from resetting the middle queue because edge cases
(first / last) may actually be less likely to trigger bugs.
# ./tools/testing/selftests/net/nl_netdev.py
KTAP version 1
1..4
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most of our tests use rtnetlink to read device stats, so they
don't expose the drivers much to paths in which device stats
are read under RCU. Add tests which hammer profcs reads to
make sure drivers:
- don't sleep while reporting stats,
- can handle parallel reads,
- can handle device going down while reading.
Set ifname on the env class in NetDrvEnv, we already do that
in NetDrvEpEnv.
KTAP version 1
1..7
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
ok 6 stats.procfs_hammer
# completed up/down cycles: 6
ok 7 stats.procfs_downup_hammer
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250107022932.2087744-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few recently added packetdrill tests that are known time sensitive
(e.g., because testing timestamping) occasionally fail in debug mode:
https://netdev.bots.linux.dev/contest.html?executor=vmksft-packetdrill-dbg
These failures are well understood. Correctness of the tests is
verified in non-debug mode. Continue running in debug mode also, to
keep coverage with debug instrumentation.
But, only in debug mode, mark these tests with well understood
timing issues as XFAIL (known failing) rather than FAIL when failing.
Introduce an allow list xfail_list with known cases.
Expand the ktap infrastructure with XFAIL support.
Fixes: eab35989cc ("selftests/net: packetdrill: import tcp/fast_recovery, tcp/nagle, tcp/timestamping")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241218100013.0c698629@kernel.org/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250103113142.129251-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tests using HW stats wait for them to stabilize, using data from
ethtool -c as the delay. Not all drivers implement ethtool -c
so handle the errors gracefully.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241220003116.1458863-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alongside the helper ip_link_set_up(), one to set the link down will be
useful as well. Add a helper to determine the link state as well,
ip_link_is_up(), and use it to short-circuit any changes if the state is
already the desired one.
Furthermore, add a helper bridge_vlan_add().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/856d9e01725fdba21b7f6716358f645b19131af2.1734540770.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the blamed commit, we require mausezahn because send_raw() uses it.
Remove the "REQUIRE_MZ=no" line, which overwrites the default of requiring it.
Fixes: 2379795042 ("selftests: net: local_termination: add PTP frames to the mix")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241219155410.1856868-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for the new FIB rule flow label selector. Test both good and bad
flows and with both input and output routes.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ]
[...]
Tests passed: 268
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the standard import and testing method, as described in the
import of tcp/ecn and tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-5-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the standard import and testing method, as described in the
import of tcp/ecn and tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-4-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the standard import and testing method, as described in the
import of tcp/ecn , tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-3-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same as initial tests, import verbatim from
github.com/google/packetdrill, aside from:
- update `source ./defaults.sh` path to adjust for flat dir
- add SPDX headers
- remove author statements if any
- drop blank lines at EOF
Same test process as previous tests. Both with and without debug mode.
Recording the steps once:
make mrproper
vng --build \
--config tools/testing/selftests/net/packetdrill/config \
--config kernel/configs/debug.config
vng -v --run . --user root --cpus 4 -- \
make -C tools/testing/selftests TARGETS=net/packetdrill run_tests
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-2-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY
ancillary data.
cmsg_so_priority.sh script added to validate SO_PRIORITY behavior
by creating VLAN device with egress QoS mapping and testing packet
priorities using flower filters. Verify that packets with different
priorities are correctly matched and counted by filters for multiple
protocols and IP versions.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-4-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the kernel's ability to:
- update the key (but not the version or cipher), only for TLS1.3
- pause decryption after receiving a KeyUpdate message, until a new
RX key has been provided
- reflect the pause/non-readable socket in poll()
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows us to generate different keys, so that we can test that
rekey is using the correct one.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically, DSA drivers have seen problems with the model in which
bridge VLANs work, particularly with them being offloaded to switchdev
asynchronously relative to when they become active (vlan_filtering=1).
This switchdev API peculiarity was papered over by commit 2ea7a679ca
("net: dsa: Don't add vlans when vlan filtering is disabled"), which
introduced other problems, fixed by commit 54a0ed0df4 ("net: dsa:
provide an option for drivers to always receive bridge VLANs") through
an opt-in ds->configure_vlan_while_not_filtering bool (which later
became an opt-out).
The point is that some DSA drivers still skip VLAN configuration while
VLAN-unaware, and there is a desire to get rid of that behavior.
It's hard to deduce from the wording "at least one corner case" what
Andrew saw, but my best guess is that there is a discrepancy of meaning
between bridge pvid and hardware port pvid which caused breakage.
On one side, the Linux bridge with vlan_filtering=0 is completely
VLAN-unaware, and will accept and process a packet the same way
irrespective of the VLAN groups on the ports or the bridge itself
(there may not even be a pvid, and this makes no difference).
On the other hand, DSA switches still do VLAN processing internally,
even with vlan_filtering disabled, but they are expected to classify all
packets to the port pvid. That pvid shouldn't be confused with the
bridge pvid, and there lies the problem.
When a switch port is under a VLAN-unaware bridge, the hardware pvid
must be explicitly managed by the driver to classify all received
packets to it, regardless of bridge VLAN groups. When under a VLAN-aware
bridge, the hardware pvid must be synchronized to the bridge port pvid.
To do this correctly, the pattern is unfortunately a bit complicated,
and involves hooking the pvid change logic into quite a few places
(the ones that change the input variables which determine the value to
use as hardware pvid for a port). See mv88e6xxx_port_commit_pvid(),
sja1105_commit_pvid(), ocelot_port_set_pvid() etc.
The point is that not all drivers used to do that, especially in older
kernels. If a driver is to blindly program a bridge pvid VLAN received
from switchdev while it's VLAN-unaware, this might in turn change the
hardware pvid used by a VLAN-unaware bridge port, which might result in
packet loss depending which other ports have that pvid too (in that same
note, it might also go unnoticed).
To capture that condition, it is sufficient to take a VLAN-unaware
bridge and change the [VLAN-aware] bridge pvid on a single port, to a
VID that isn't present on any other port. This shouldn't have absolutely
any effect on packet classification or forwarding. However, broken
drivers will take the bait, and change their PVID to 3, causing packet
loss.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241210233541.1401837-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.
Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped
Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.
Fixes: efb056e5f1 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Run VXLAN packets through a gateway. Flip individual bits of the packet
and/or reserved bits of the gateway, and check that the gateway treats the
packets as expected.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/388bef3c30ebc887d4e64cd86a362e2df2f2d2e1.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ip_link_set_addr(), ip_link_set_up(), ip_addr_add() and ip_route_add()
to the suite of helpers that automatically schedule a corresponding
cleanup.
When setting a new MAC, one needs to remember the old address first. Move
mac_get() from forwarding/ to that end.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/add6bcbe30828fd01363266df20c338cf13aaf25.1733412063.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix various integer type conversions by using strtoull and a temporary
variable which is bounds checked before being casted into the
appropriate cfg_* variable for use by the test program.
While here:
- free the strdup'd cfg string for overall hygenie.
- initialize napi_id = 0 in setup_queue to avoid warnings on some
compilers.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204163239.294123-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, sendmmsg is implemented in udpgso_bench_tx.c,
but it is not called by any test script.
This patch adds a test for sendmmsg in udpgso_bench.sh.
This allows for basic API testing and benchmarking
comparisons with GSO.
Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241203222843.26983-1-nakayamakenjiro@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test to check the temporary address could be added/removed
correctly when mngtempaddr is set or removed/unmanaged.
Signed-off-by: Sam Edwards <cfsworks@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test that extacks in dumps work. The test fills up the receive buffer
to test both the inline dump (as part of sendmsg()) and delayed one
(run during recvmsg()).
Use YNL helpers to parse the messages. We need to add the test to YNL
file to make sure the right include path are used.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241119224432.1713040-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang