The existing documentation for the NL80211_CMD_ASSOC_MLO_RECONF
does not clearly explain handling of link reconfiguration request
results from the driver.
Add documentation to explain that the command is used as an event to
notify userspace about added links information, and that the existing
NL80211_CMD_LINKS_REMOVED command is used to notify userspace about
removed links information.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-2-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
requires adding support for a number of new FW commands so
it's quite large in terms of LoC. The rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue reset,
prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2mAa
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
To support auxiliary timekeeping and the related user space interfaces,
it's required to define a clock ID range for them.
Reserve 8 auxiliary clock IDs after the regular timekeeping clock ID space.
This is the maximum number of auxiliary clocks the kernel can support. The actual
number of supported clocks depends obviously on the presence of related devices
and might be constraint by the available VDSO space.
Add the corresponding timekeeper IDs as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250519083025.905800695@linutronix.de
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-8-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the ability to configure the PSE PI budget evaluation
strategies. Budget evaluation strategies is utilized by PSE controllers to
determine which ports to turn off first in scenarios such as power budget
exceedance.
The pis_prio_max value is used to define the maximum priority level
supported by the controller. Both the current priority and the maximum
priority are exposed to the user through the pse_ethtool_get_status call.
This patch add support for two mode of budget evaluation strategies.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
Priority max value is matching the number of PSE PIs within the PSE.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
Priority max value is set by the PSE controller driver.
For now, budget evaluation methods are not configurable and cannot be
mixed. They are hardcoded in the PSE driver itself, as no current PSE
controller supports both methods.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the index of the newly introduced PSE power domain to the user,
enabling improved management of the power budget for PSE devices.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-5-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for devm_pse_irq_helper() to register PSE interrupts and report
events such as over-current or over-temperature conditions. This follows a
similar approach to the regulator API but also sends notifications using a
dedicated PSE ethtool netlink socket.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-2-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under fixes switched to uAPI generation from the YAML
spec. A number of custom defines were left behind, mostly
for commands very hard to express in YAML spec.
Among what was left behind was the name and version of
the generic netlink family. Problem is that the codegen
always outputs those values so we ended up with a duplicated,
differently named set of defines.
Provide naming info in YAML and remove the incorrect defines.
Fixes: 8d0580c6eb ("ethtool: regenerate uapi header from the spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RKISP supports a basic Wide Dynamic Range (WDR) module since the first
iteration (v1.0) of the ISP. Add support for enabling and configuring it
using extensible parameters.
Also, to ease programming, switch to using macro variables for defining
the tonemapping curve register addresses.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://lore.kernel.org/r/20250610-wdr-latest-v4-1-b69d0ac17ce9@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a RKISP1_CID_SUPPORTED_PARAMS_BLOCKS V4L2 control to be able to
query the parameters blocks supported by the current kernel on the
current hardware from user space.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20250523-supported-params-and-wdr-v3-2-7283b8536694@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Locally-generated MC packets have so far not been subject to MC routing.
Instead an MC-enabled installation would maintain the MC routing tables,
and separately from that the list of interfaces to send packets to as part
of the VXLAN FDB and MDB.
In a previous patch, a ip_mr_output() and ip6_mr_output() routines were
added for IPv4 and IPv6. All locally generated MC traffic is now passed
through these functions. For reasons of backward compatibility, an SKB
(IPCB / IP6CB) flag guards the actual MC routing.
This patch adds logic to set the flag, and the UAPI to enable the behavior.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/d899655bb7e9b2521ee8c793e67056b9fd02ba12.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To pick up the changes in this cset:
1e7933a575 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
5b572e8a9f ("bits: introduce fixed-type BIT_U*()")
19408200c0 ("bits: introduce fixed-type GENMASK_U*()")
31299a5e02 ("bits: add comments and newlines to #if, #else and #endif directives")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Please see tools/include/uapi/README for further details.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: I Hsin Cheng <richard120310@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/aEr0ZJ60EbshEy6p@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
_IO*() is the proper way of defining ioctl numbers. All these vt numbers
were synthetically built up the same way the _IO() macro does.
So instead of implicit hex numbers, use _IO() properly.
To not change the pre-existing numbers, use only _IO() (and not _IOR()
or _IOW()). The latter would change the numbers indeed.
Objdump of vt_ioctl.o reveals no difference with this patch.
Again, VT_GETCONSIZECSRPOS already uses _IOR(), so everything is paved
for this patch.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As discussed earlier (see the Link below), use the preferred ioctl types
in vt.h (__u8, __u16, ...).
These types are already used for the new VT_GETCONSIZECSRPOS.
Therefore, the necessary includes are already present. Since now, the
types are used for every structure defined in the header now.
Note the kernel is built with -funsigned-char, therefore 'char' becomes
'__u8' in here.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Link: https://lore.kernel.org/all/p7p83sq1-4ro2-o924-s9o2-30spr74n076o@syhkavp.arg/
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250611100319.186924-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add enum dpll_feature_state for control over features.
Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two possible scenarios for syscall filtering:
- having a trusted/allowed range of PCs, and intercepting everything else
- or the opposite: a single untrusted/intercepted range and allowing
everything else (this is relevant for any kind of sandboxing scenario,
or monitoring behavior of a single library)
The current API only allows the former use case due to allowed
range wrap-around check. Add PR_SYS_DISPATCH_INCLUSIVE_ON that
enables the second use case.
Add PR_SYS_DISPATCH_EXCLUSIVE_ON alias for PR_SYS_DISPATCH_ON
to make it clear how it's different from the new
PR_SYS_DISPATCH_INCLUSIVE_ON.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/97947cc8e205ff49675826d7b0327ef2e2c66eea.1747839857.git.dvyukov@google.com
Fix for __GENMASK() and __GENMASK_ULL() in UAPI.
-----BEGIN PGP SIGNATURE-----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=jBAP
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux
Pull bitmap fix from Yury Norov:
"Fix for __GENMASK() and __GENMASK_ULL() in UAPI"
* tag 'bitmap-for-6.16-rc2' of https://github.com/norov/linux:
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again
Extend the coredump socket to allow the coredump server to tell the
kernel how to process individual coredumps.
When the crashing task connects to the coredump socket the kernel will
send a struct coredump_req to the coredump server. The kernel will set
the size member of struct coredump_req allowing the coredump server how
much data can be read.
The coredump server uses MSG_PEEK to peek the size of struct
coredump_req. If the kernel uses a newer struct coredump_req the
coredump server just reads the size it knows and discard any remaining
bytes in the buffer. If the kernel uses an older struct coredump_req
the coredump server just reads the size the kernel knows.
The returned struct coredump_req will inform the coredump server what
features the kernel supports. The coredump_req->mask member is set to
the currently know features.
The coredump server may only use features whose bits were raised by the
kernel in coredump_req->mask.
In response to a coredump_req from the kernel the coredump server sends
a struct coredump_ack to the kernel. The kernel informs the coredump
server what version of struct coredump_ack it supports by setting struct
coredump_req->size_ack to the size it knows about. The coredump server
may only send as many bytes as coredump_req->size_ack indicates (a
smaller size is fine of course). The coredump server must set
coredump_ack->size accordingly.
The coredump server sets the features it wants to use in struct
coredump_ack->mask. Only bits returned in struct coredump_req->mask may
be used.
In case an invalid struct coredump_ack is sent to the kernel a non-zero
u32 integer is sent indicating the reason for the failure. If it was
successful a zero u32 integer is sent.
In the initial version the following features are supported in
coredump_{req,ack}->mask:
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when userspace
generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@" prefix
instead of the single "@" prefix for the regular coredump socket:
@@/run/systemd/coredump.socket
will enable flexible coredump handling. Current kernels already enforce
that "@" must be followed by "/" and will reject anything else. So
extending this is backward and forward compatible.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-1-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Apart from the network and mount namespace all other namespaces expose a
stable inode number and userspace has been relying on that for a very
long time now. It's very much heavily used API. Align the mount
namespace and use a stable inode number from the reserved procfs inode
number space so this is consistent across all namespaces.
Link: https://lore.kernel.org/20250606-work-nsfs-v1-3-b8749c9a8844@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Apart from the network and mount namespace all other namespaces expose a
stable inode number and userspace has been relying on that for a very
long time now. It's very much heavily used API. Align the network
namespace and use a stable inode number from the reserved procfs inode
number space so this is consistent across all namespaces.
Link: https://lore.kernel.org/20250606-work-nsfs-v1-2-b8749c9a8844@kernel.org
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Userspace relies on the root inode numbers to identify the initial
namespaces. That's already a hard dependency. So we cannot change that
anymore. Move the initial inode numbers to a public header.
Link: d293fade24
Link: https://lore.kernel.org/20250606-work-nsfs-v1-1-b8749c9a8844@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
A decade ago commit 6d08acd2d3 ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde2 ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
Link: https://patch.msgid.link/20250609143933.1654417-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sample file was renamed from trace_output_kern.c to
trace_output.bpf.c in commit d4fffba4d0 ("samples/bpf: Change _kern
suffix to .bpf with syscall tracing program"). Adjust the path in the
documentation comment for bpf_perf_event_output.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20250610140756.16332-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current cgroup prog ordering is appending at attachment time. This is not
ideal. In some cases, users want specific ordering at a particular cgroup
level. To address this, the existing mprog API seems an ideal solution with
supporting BPF_F_BEFORE and BPF_F_AFTER flags.
But there are a few obstacles to directly use kernel mprog interface.
Currently cgroup bpf progs already support prog attach/detach/replace
and link-based attach/detach/replace. For example, in struct
bpf_prog_array_item, the cgroup_storage field needs to be together
with bpf prog. But the mprog API struct bpf_mprog_fp only has bpf_prog
as the member, which makes it difficult to use kernel mprog interface.
In another case, the current cgroup prog detach tries to use the
same flag as in attach. This is different from mprog kernel interface
which uses flags passed from user space.
So to avoid modifying existing behavior, I made the following changes to
support mprog API for cgroup progs:
- The support is for prog list at cgroup level. Cross-level prog list
(a.k.a. effective prog list) is not supported.
- Previously, BPF_F_PREORDER is supported only for prog attach, now
BPF_F_PREORDER is also supported by link-based attach.
- For attach, BPF_F_BEFORE/BPF_F_AFTER/BPF_F_ID/BPF_F_LINK is supported
similar to kernel mprog but with different implementation.
- For detach and replace, use the existing implementation.
- For attach, detach and replace, the revision for a particular prog
list, associated with a particular attach type, will be updated
by increasing count by 1.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163141.2428937-1-yonghong.song@linux.dev
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmhC7/UQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgps+6D/9BOhkMyMkUF9LAev4PBNE+x3aftjl7Y1AY
EHv2vozb4nDwXIaalG4qGUhprz2+z+hqxYjmnlOAsqbixhcSzKK5z9rjxyDka776
x03vfvKXaXZUG7XN7ENY8sJnLx4QJ0nh4+0gzT9yDyq2vKvPFLEKweNOxKDKCSbE
31vGoLFwjltp74hX+Qrnj1KMaTLgvAaV0eXKWlbX7Iiw6GFVm200zb27gth6U8bV
WQAmjSkFQ0daHtAWmXIVy7hrXiCqe8D6YPKvBXnQ4cfKVbgG0HHDuTmQLpKGzfMi
rr24MU5vZjt6OsYalceiTtifSUcf/I2+iFV7HswOk9kpOY5A2ylsWawRP2mm4PDI
nJE3LaSTRpEvs5kzPJ2kr8Zp4/uvF6ehSq8Y9w52JekmOzxusLcRcswezaO00EI0
32uuK+P505EGTcCBTrEdtaI6k7zzQEeVoIpxqvMhNRG/s5vzvIV3eVrALu2HSDma
P3paEdx7PwJla3ndmdChfh1vUR3TW3gWoZvoNCVmJzNCnLEAScTS2NsiQeEjy8zs
20IGsrRgIqt9KR8GZ2zj1ZOM47Cg0dIU3pbbA2Ja71wx4TYXJCSFFRK7mzDtXYlY
BWOix/Dks8tk118cwuxnT+IiwmWDMbDZKnygh+4tiSyrs0IszeekRADLUu03C0Ve
Dhpljqf3zA==
=gs32
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250606' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices. I think this takes the
record for the most number of patch series (30+) over the longest
period of time (2+ years) to get merged properly. Many props go to
Wesley Cheng for seeing this effort through, they took a major
out-of-tree hacked-up-monstrosity that was created by multiple
vendors for their specific devices, got it all merged into a
semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees. This feature offers major power savings on embedded
devices where a USB audio stream can continue to flow while the rest
of the system is sleeping, something that devices running on battery
power really care about. There are still some more small tweaks
left to be done here, and those patches are still out for review and
arguing among the different hardware companies, but this is a major
step forward and a great example of how to do upstream development
well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added for
the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKnpA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym3zQCgz+Oz3DHfLcYOX7evGI2PjI4GNMkAoJa6Kndw
h4YgL+8MeBpKuHCQvxy8
=KVAn
-----END PGP SIGNATURE-----
Merge tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and reviews
and fixes for the vt unicode handling logic which composed most of the
overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots of
error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKkAA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymRDwCfS4DCUt2naTNf/nE3g29Y77OqHhkAoKqjmpPu
G+8PLdjKxW05iQqkngnQ
=r8i7
-----END PGP SIGNATURE-----
Merge tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.16-rc1.
A little more churn than normal in this portion of the kernel for this
development cycle, Jiri and Nicholas were busy with cleanups and
reviews and fixes for the vt unicode handling logic which composed
most of the overall work in here.
Major changes are:
- vt unicode changes/reverts/changes from Nicholas. This should help
out a lot with screen readers and others that rely on vt console
support
- lock guard additions to the core tty/serial code to clean up lots
of error handling logic
- 8250 driver updates and fixes
- device tree conversions to yaml
- sh-sci driver updates
- other small cleanups and updates for serial drivers and tty core
portions
All of these have been in linux-next for 2 weeks with no reported issues"
* tag 'tty-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (105 commits)
tty: serial: 8250_omap: fix TX with DMA for am33xx
vt: add VT_GETCONSIZECSRPOS to retrieve console size and cursor position
vt: bracketed paste support
vt: remove VT_RESIZE and VT_RESIZEX from vt_compat_ioctl()
vt: process the full-width ASCII fallback range programmatically
vt: make use of ucs_get_fallback() when glyph is unavailable
vt: add ucs_get_fallback()
vt: create ucs_fallback_table.h_shipped with gen_ucs_fallback_table.py
vt: introduce gen_ucs_fallback_table.py to create ucs_fallback_table.h
vt: move glyph determination to a separate function
vt: make sure displayed double-width characters are remembered as such
vt: ucs.c: fix misappropriate in_range() usage
serial: max3100: Replace open-coded parity calculation with parity8()
dt-bindings: serial: 8250_omap: Drop redundant properties
dt-bindings: serial: Convert socionext,milbeaut-usio-uart to DT schema
dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema
dt-bindings: serial: Convert arm,sbsa-uart to DT schema
dt-bindings: serial: Convert snps,arc-uart to DT schema
dt-bindings: serial: Convert marvell,armada-3700-uart to DT schema
dt-bindings: serial: Convert lantiq,asc to DT schema
...
Commit 1e7933a575 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
did not take in account that the usage of BITS_PER_LONG in __GENMASK() was
changed to __BITS_PER_LONG for UAPI-safety in
commit 3c7a8e190b ("uapi: introduce uapi-friendly macros for GENMASK").
BITS_PER_LONG can not be used in UAPI headers as it derives from the kernel
configuration and not from the current compiler invocation.
When building compat userspace code or a compat vDSO its value will be
incorrect.
Switch back to __BITS_PER_LONG.
Fixes: 1e7933a575 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN
in all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place,
fix GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth: stmmac: prevent div by 0 when clock rate is misconfigured
- eth: ice: fix Tx scheduler handling of XDP and changing queue count
- eth: b53: fix support for the RGMII interface when delays configured
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sRQt
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
After commit 68ca5d4eeb ("bpf: support BPF cookie in raw tracepoint
(raw_tp, tp_btf) programs"), we can show the cookie in bpf_link_info
like kprobe etc.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250603154309.3063644-1-chen.dylane@linux.dev
-----BEGIN PGP SIGNATURE-----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=eWJw
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Print the actual delay time in pci_bridge_wait_for_secondary_bus()
instead of assuming it was 1000ms (Wilfred Mallawa)
- Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
devices', which broke resume from system sleep on AMD platforms and
has been fixed by other commits (Lukas Wunner)
Resource management:
- Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
and unnecessary (Philipp Stanner)
- Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
and related flags since all uses have been removed (Philipp
Stanner)
- Rework devres 'request' functions so they are no longer 'hybrid',
i.e., their behavior no longer depends on whether
pcim_enable_device or pci_enable_device() was used, and remove
related code (Philipp Stanner)
- Warn (not BUG()) about failure to assign optional resources (Ilpo
Järvinen)
Error handling:
- Log the DPC Error Source ID only when it's actually valid (when
ERR_FATAL or ERR_NONFATAL was received from a downstream device)
and decode into bus/device/function (Bjorn Helgaas)
- Determine AER log level once and save it so all related messages
use the same level (Karolina Stolarek)
- Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
Errors (Karolina Stolarek)
- Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
controls on interval and burst count, to avoid flooding logs and
RCU stall warnings (Jon Pan-Doh)
Power management:
- Increment PM usage counter when probing reset methods so we don't
try to read config space of a powered-off device (Alex Williamson)
- Set all devices to D0 during enumeration to ensure ACPI opregion is
connected via _REG (Mario Limonciello)
Power control:
- Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
the filename paths. Retain old deprecated symbols for
compatibility, except for the pwrctrl slot driver
(PCI_PWRCTRL_SLOT) (Johan Hovold)
- When unregistering pwrctrl, cancel outstanding rescan work before
cleaning up data structures to avoid use-after-free issues (Brian
Norris)
Bandwidth control:
- Simplify link bandwidth controller by replacing the count of Link
Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
flag (Ilpo Järvinen)
- Update the Link Speed after retraining, since the Link Speed may
have changed (Ilpo Järvinen)
PCIe native device hotplug:
- Ignore Presence Detect Changed caused by DPC.
pciehp already ignores Link Down/Up events caused by DPC, but on
slots using in-band presence detect, DPC causes a spurious Presence
Detect Changed event (Lukas Wunner)
- Ignore Link Down/Up caused by Secondary Bus Reset.
On hotplug ports using in-band presence detect, the reset causes a
Presence Detect Changed event, which mistakenly caused teardown and
re-enumeration of the device. Drivers may need to annotate code
that resets their device (Lukas Wunner)
Virtualization:
- Add an ACS quirk for Loongson Root Ports that don't advertise ACS
but don't allow peer-to-peer transactions between Root Ports; the
quirk allows each Root Port to be in a separate IOMMU group (Huacai
Chen)
Endpoint framework:
- For fixed-size BARs, retain both the actual size and the possibly
larger size allocated to accommodate iATU alignment requirements
(Jerome Brunet)
- Simplify ctrl/SPAD space allocation and avoid allocating more space
than needed (Jerome Brunet)
- Correct MSI-X PBA offset calculations for DesignWare and Cadence
endpoint controllers (Niklas Cassel)
- Align the return value (number of interrupts) encoding for
pci_epc_get_msi()/pci_epc_ops::get_msi() and
pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)
- Align the nr_irqs parameter encoding for
pci_epc_set_msi()/pci_epc_ops::set_msi() and
pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)
Common host controller library:
- Convert pci-host-common to a library so platforms that don't need
native host controller drivers don't need to include these helper
functions (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Extract ECAM bridge creation helper from pci_host_common_probe() to
separate driver-specific things like MSI from PCI things (Marc
Zyngier)
- Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
varying capabilities (Marc Zyngier)
- Skip ports disabled in DT when setting up ports (Janne Grunau)
- Add t6020 compatible string (Alyssa Rosenzweig)
- Add T602x PCIe support (Hector Martin)
- Directly set/clear INTx mask bits because T602x dropped the
accessors that could do this without locking (Marc Zyngier)
- Move port PHY registers to their own reg items to accommodate
T602x, which moves them around; retain default offsets for existing
DTs that lack phy%d entries with the reg offsets (Hector Martin)
- Stop polling for core refclk, which doesn't work on T602x and the
bootloader has already done anyway (Hector Martin)
- Use gpiod_set_value_cansleep() when asserting PERST# in probe
because we're allowed to sleep there (Hector Martin)
Cadence PCIe controller driver:
- Drop a runtime PM 'put' to resolve a runtime atomic count underflow
(Hans Zhang)
- Make the cadence core buildable as a module (Kishon Vijay Abraham I)
- Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
loadable drivers when they are removed (Siddharth Vadapalli)
Freescale i.MX6 PCIe controller driver:
- Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
(Richard Zhu)
- Remove redundant dw_pcie_wait_for_link() from
imx_pcie_start_link(); since the DWC core does this, imx6 only
needs it when retraining for a faster link speed (Richard Zhu)
- Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)
- Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
some cases, the controller can't exit 'L23 Ready' through Beacon or
PERST# deassertion (Richard Zhu)
- Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
GT/s, causing timeouts in L1 (Richard Zhu)
- Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)
- Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)
Mobiveil PCIe controller driver:
- Return bool (not int) for link-up check in
mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
Zhang)
NVIDIA Tegra194 PCIe controller driver:
- Create debugfs directory for 'aspm_state_cnt' only when
CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
Zhang)
Qualcomm PCIe controller driver:
- Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
equalization presets (Krishna Chaitanya Chundru)
- Read Maximum Link Width from the Link Capabilities register if DT
lacks 'num-lanes' property (Krishna Chaitanya Chundru)
- Add Physical Layer 64 GT/s Capability ID and register offsets for
8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
Chundru)
- Add generic dwc support for configuring lane equalization presets
(Krishna Chaitanya Chundru)
- Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)
Renesas R-Car PCIe controller driver:
- Describe endpoint BAR 4 as being fixed size (Jerome Brunet)
- Document how to obtain R-Car V4H (r8a779g0) controller firmware
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Reorder rockchip_pci_core_rsts because
reset_control_bulk_deassert() deasserts in reverse order, to fix a
link training regression (Jensen Huang)
- Mark RK3399 as being capable of raising INTx interrupts (Niklas
Cassel)
Rockchip DesignWare PCIe controller driver:
- Check only PCIE_LINKUP, not LTSSM status, to determine whether the
link is up (Shawn Lin)
- Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
for Root Complex and Endpoint modes (Shawn Lin)
- Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
resets non-sticky registers (Shawn Lin)
- Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
(Diederik de Haas)
Synopsys DesignWare PCIe controller driver:
- Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
more robust; this will not affect the intended link width if all
lanes are functional (Wenbin Yao)
- Return bool (not int) for link-up check in dw_pcie_ops.link_up()
and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
tegra194, uniphier, visconti (Hans Zhang)
- Add debugfs support for exposing DWC device-specific PTM context
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Make j721e buildable as a loadable and removable module (Siddharth
Vadapalli)
- Fix j721e host/endpoint dependencies that result in link failures
in some configs (Arnd Bergmann)
Device tree bindings:
- Add qcom DT binding for 'global' interrupt (PCIe controller and
link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
Sadhasivam)
- Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)
- Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)
- Correct indentation and style of examples in brcm,stb-pcie,
cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
(Krzysztof Kozlowski)
- Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
armada8k from text to schema DT bindings (Rob Herring)
- Remove obsolete .txt DT bindings for content that has been moved to
schemas (Rob Herring)
- Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
and IPQ9574 (Varadarajan Narayanan)
- Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)
- Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
PolarFire may be configured that way (Conor Dooley)
Miscellaneous:
- Drop 'pci' suffix from intel_mid_pci.c filename to match similar
files (Andy Shevchenko)
- All platforms with PCI have an MMU, so add PCI Kconfig dependency
on MMU to simplify build testing and avoid inadvertent build
regressions (Arnd Bergmann)
- Update Krzysztof Wilczyński's email address in MAINTAINERS
(Krzysztof Wilczyński)
- Update Manivannan Sadhasivam's email address in MAINTAINERS
(Manivannan Sadhasivam)"
* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
MAINTAINERS: Update Manivannan Sadhasivam email address
PCI: j721e: Fix host/endpoint dependencies
PCI: j721e: Add support to build as a loadable module
PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
PCI: cadence: Add support to build pcie-cadence library as a kernel module
MAINTAINERS: Update Krzysztof Wilczyński email address
PCI: Remove unnecessary linesplit in __pci_setup_bridge()
PCI: WARN (not BUG()) when we fail to assign optional resources
PCI: Remove unused pci_printk()
PCI: qcom: Replace PERST# sleep time with proper macro
PCI: dw-rockchip: Replace PERST# sleep time with proper macro
PCI: host-common: Convert to library for host controller drivers
PCI/ERR: Remove misleading TODO regarding kernel panic
PCI: cadence: Remove duplicate message code definitions
PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
PCI: cadence-ep: Correct PBA offset in .set_msix() callback
...
- dm-delay: don't busy-wait in kthread
- dm: use use generic disable_* functions instead of open coding them
- dm: lock queue limits when reading them
- dm-verity: use softirq context only when !need_resched()
- dm-bufio: remove maximum age based eviction
- dm: remove unneeded kvfree from alloc_targets
- dm-flakey: various fixes
- dm-mpath: interface for explicit probing of active paths
- dm: fix BLK_FEAT_ATOMIC_WRITES
- dm: pass through operations on wrapped inline crypto keys
- dm vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mpath: replace spin_lock_irqsave with spin_lock_irq
- dm-mirror: fix a tiny race condition
- dm-verity: fix a memory leak if some arguments are specified multiple times
- dm-stripe: small code cleanup
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCaD8vFBQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbYGFAQC/V62PzDUa326WSdvwhtYe6jphInlW
ZSmh37L4MIcV2wD/S8UqIaC9GSakee6jEWBTRiDqNZNEOIWhbd7f6gnTOQ0=
=eYUe
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- better error handling when reloading a table
- use use generic disable_* functions instead of open coding them
- lock queue limits when reading them
- remove unneeded kvfree from alloc_targets
- fix BLK_FEAT_ATOMIC_WRITES
- pass through operations on wrapped inline crypto keys
- dm-verity:
- use softirq context only when !need_resched()
- fix a memory leak if some arguments are specified multiple times
- dm-mpath:
- interface for explicit probing of active paths
- replace spin_lock_irqsave with spin_lock_irq
- dm-delay: don't busy-wait in kthread
- dm-bufio: remove maximum age based eviction
- dm-flakey: various fixes
- vdo indexer: don't read request structure after enqueuing
- dm-zone: Use bdev_*() helper functions where applicable
- dm-mirror: fix a tiny race condition
- dm-stripe: small code cleanup
* tag 'for-6.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm-stripe: small code cleanup
dm-verity: fix a memory leak if some arguments are specified multiple times
dm-mirror: fix a tiny race condition
dm-table: check BLK_FEAT_ATOMIC_WRITES inside limits_lock
dm mpath: replace spin_lock_irqsave with spin_lock_irq
dm-mpath: Don't grab work_mutex while probing paths
dm-zone: Use bdev_*() helper functions where applicable
dm vdo indexer: don't read request structure after enqueuing
dm: pass through operations on wrapped inline crypto keys
blk-crypto: export wrapped key functions
dm-table: Set BLK_FEAT_ATOMIC_WRITES for target queue limits
dm mpath: Interface for explicit probing of active paths
dm: Allow .prepare_ioctl to handle ioctls directly
dm-flakey: make corrupting read bios work
dm-flakey: remove useless ERROR_READS check in flakey_end_io
dm-flakey: error all IOs when num_features is absent
dm-flakey: Clean up parsing messages
dm: remove unneeded kvfree from alloc_targets
dm-bufio: remove maximum age based eviction
dm-verity: use softirq context only when !need_resched()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCaD2Y1wAKCRDh3BK/laaZ
PFSHAP4q1+mOlQfZJPH/PFDwa+F0QW/uc3szXatS0888nxui/gEAsIeyyJlf+Mr8
/1JPXxCqcapRFw9xsS0zioiK54Elfww=
=2KxA
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Remove tmp page copying in writeback path (Joanne).
This removes ~300 lines and with that a lot of complexity related to
avoiding reclaim related deadlock. The old mechanism is replaced with
a mapping flag that tells the MM not to block reclaim waiting for
writeback to complete. The MM parts have been reviewed/acked by
respective maintainers.
- Convert more code to handle large folios (Joanne). This still just
adds the code to deal with large folios and does not enable them yet.
- Allow invalidating all cached lookups atomically (Luis Henriques).
This feature is useful for CernVMFS, which currently does this
iteratively.
- Align write prefaulting in fuse with generic one (Dave Hansen)
- Fix race causing invalid data to be cached when setting attributes on
different nodes of a distributed fs (Guang Yuan Wu)
- Update documentation for passthrough (Chen Linxuan)
- Add fdinfo about the device number associated with an opened
/dev/fuse instance (Chen Linxuan)
- Increase readdir buffer size (Miklos). This depends on a patch to VFS
readdir code that was already merged through Christians tree.
- Optimize io-uring request expiration (Joanne)
- Misc cleanups
* tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: increase readdir buffer size
readdir: supply dir_context.count as readdir buffer size hint
fuse: don't allow signals to interrupt getdents copying
fuse: support large folios for writeback
fuse: support large folios for readahead
fuse: support large folios for queued writes
fuse: support large folios for stores
fuse: support large folios for symlinks
fuse: support large folios for folio reads
fuse: support large folios for writethrough writes
fuse: refactor fuse_fill_write_pages()
fuse: support large folios for retrieves
fuse: support copying large folios
fs: fuse: add dev id to /dev/fuse fdinfo
docs: filesystems: add fuse-passthrough.rst
MAINTAINERS: update filter of FUSE documentation
fuse: fix race between concurrent setattrs from multiple nodes
fuse: remove tmp folio for writebacks and internal rb tree
mm: skip folio reclaim in legacy memcg contexts for deadlockable mappings
fuse: optimize over-io-uring request expiration check
...
simplifies the act of creating a pte which addresses the first page in a
folio and reduces the amount of plumbing which architecture must
implement to provide this.
- The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox
is a shower of largely unrelated folio infrastructure changes which
clean things up and better prepare us for future work.
- The 3 patch series "memory,x86,acpi: hotplug memory alignment
advisement" from Gregory Price adds early-init code to prevent x86 from
leaving physical memory unused when physical address regions are not
aligned to memory block size.
- The 2 patch series "mm/compaction: allow more aggressive proactive
compaction" from Michal Clapinski provides some tuning of the (sadly,
hard-coded (more sadly, not auto-tuned)) thresholds for our invokation
of proactive compaction. In a simple test case, the reduction of a guest
VM's memory consumption was dramatic.
- The 8 patch series "Minor cleanups and improvements to swap freeing
code" from Kemeng Shi provides some code cleaups and a small efficiency
improvement to this part of our swap handling code.
- The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API"
from Dmitry Levin adds the ability for a ptracer to modify syscalls
arguments. At this time we can alter only "system call information that
are used by strace system call tampering, namely, syscall number,
syscall arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report
guard regions" from Andrei Vagin extends the info returned by the
PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more
efficiently get at the info about guard regions.
- The 2 patch series "Fix parameter passed to page_mapcount_is_type()"
from Gavin Shan implements that fix. No runtime effect is expected
because validate_page_before_insert() happens to fix up this error.
- The 3 patch series "kernel/events/uprobes: uprobe_write_opcode()
rewrite" from David Hildenbrand basically brings uprobe text poking into
the current decade. Remove a bunch of hand-rolled implementation in
favor of using more current facilities.
- The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64"
from Anshuman Khandual provides enhancements and generalizations to the
pte dumping code. This might be needed when 128-bit Page Table
Descriptors are enabled for ARM.
- The 12 patch series "Always call constructor for kernel page tables"
from Kevin Brodsky "ensures that the ctor/dtor is always called for
kernel pgtables, as it already is for user pgtables". This permits the
addition of more functionality such as "insert hooks to protect page
tables". This change does result in various architectures performing
unnecesary work, but this is fixed up where it is anticipated to occur.
- The 9 patch series "Rust support for mm_struct, vm_area_struct, and
mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM
structures.
- The 3 patch series "fix incorrectly disallowed anonymous VMA merges"
from Lorenzo Stoakes takes advantage of some VMA merging opportunities
which we've been missing for 15 years.
- The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED
and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB
flushing. Instead of flushing each address range in the provided iovec,
we batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- The 6 patch series "Track node vacancy to reduce worst case allocation
counts" from Sidhartha Kumar makes the maple tree smarter about its node
preallocation. stress-ng mmap performance increased by single-digit
percentages and the amount of unnecessarily preallocated memory was
dramaticelly reduced.
- The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from
Baoquan He removes a few unnecessary things which Baoquan noted when
reading the code.
- The 3 patch series ""Enhance sysfs handling for memory hotplug in
weighted interleave" from Rakie Kim "enhances the weighted interleave
policy in the memory management subsystem by improving sysfs handling,
fixing memory leaks, and introducing dynamic sysfs updates for memory
hotplug support". Fixes things on error paths which we are unlikely to
hit.
- The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups
including tiered memory" from SeongJae Park introduces new DAMOS quota
goal metrics which eliminate the manual tuning which is required when
utilizing DAMON for memory tiering.
- The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from
Baoquan He provides cleanups and small efficiency improvements which
Baoquan found via code inspection.
- The 2 patch series "vmscan: enforce mems_effective during demotion"
from Gregory Price "changes reclaim to respect cpuset.mems_effective
during demotion when possible". because "presently, reclaim explicitly
ignores cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated." "This is useful for isolating workloads on a
multi-tenant system from certain classes of memory more consistently."
- The 2 patch series ""Clean up split_huge_pmd_locked() and remove
unnecessary folio pointers" from Gavin Guo provides minor cleanups and
efficiency gains in in the huge page splitting and migrating code.
- The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang
creates a slab cache for `struct mem_cgroup', yielding improved memory
utilization.
- The 4 patch series "add max arg to swappiness in memory.reclaim and
lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness="
argument for memory.reclaim MGLRU's lru_gen. This directs proactive
reclaim to reclaim from only anon folios rather than file-backed folios.
- The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike
Rapoport is the first step on the path to permitting the kernel to
maintain existing VMs while replacing the host kernel via file-based
kexec. At this time only memblock's reserve_mem is preserved.
- The 7 patch series "mm: Introduce for_each_valid_pfn()" from David
Woodhouse provides and uses a smarter way of looping over a pfn range.
By skipping ranges of invalid pfns.
- The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to
one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless
VMA scanning when a task is pinned a single NUMA mode. Dramatic
performance benefits were seen in some real world cases.
- The 2 patch series "JFS: Implement migrate_folio for
jfs_metapage_aops" from Shivank Garg addresses a warning which occurs
during memory compaction when using JFS.
- The 4 patch series "move all VMA allocation, freeing and duplication
logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c
into the more appropriate mm/vma.c.
- The 6 patch series "mm, swap: clean up swap cache mapping helper" from
Kairui Song provides code consolidation and cleanups related to the
folio_index() function.
- The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal
Moola does that.
- The 8 patch series "memcg: Fix test_memcg_min/low test failures" from
Waiman Long addresses some bogus failures which are being reported by
the test_memcontrol selftest.
- The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare
hook" from Lorenzo Stoakes commences the deprecation of
file_operations.mmap() in favor of the new
file_operations.mmap_prepare(). The latter is more restrictive and
prevents drivers from messing with things in ways which, amongst other
problems, may defeat VMA merging.
- The 4 patch series "memcg: decouple memcg and objcg stocks"" from
Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's
one. This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- The 6 patch series "mm/damon: minor fixups and improvements for code,
tests, and documents" from SeongJae Park is "yet another batch of
miscellaneous DAMON changes. Fix and improve minor problems in code,
tests and documents."
- The 7 patch series "memcg: make memcg stats irq safe" from Shakeel
Butt converts memcg stats to be irq safe. Another step along the way to
making memcg charging and stats updates NMI-safe, a BPF requirement.
- The 4 patch series "Let unmap_hugepage_range() and several related
functions take folio instead of page" from Fan Ni provides folio
conversions in the hugetlb code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA
ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x
Qqb/UGMEpilyre1PayQqOnct3aSL9Ao=
=tYYm
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
Currently, ublk_drv associates to each hardware queue (hctx) a unique
task (called the queue's ubq_daemon) which is allowed to issue
COMMIT_AND_FETCH commands against the hctx. If any other task attempts
to do so, the command fails immediately with EINVAL. When considered
together with the block layer architecture, the result is that for each
CPU C on the system, there is a unique ublk server thread which is
allowed to handle I/O submitted on CPU C. This can lead to suboptimal
performance under imbalanced load generation. For an extreme example,
suppose all the load is generated on CPUs mapping to a single ublk
server thread. Then that thread may be fully utilized and become the
bottleneck in the system, while other ublk server threads are totally
idle.
This issue can also be addressed directly in the ublk server without
kernel support by having threads dequeue I/Os and pass them around to
ensure even load. But this solution requires inter-thread communication
at least twice for each I/O (submission and completion), which is
generally a bad pattern for performance. The problem gets even worse
with zero copy, as more inter-thread communication would be required to
have the buffer register/unregister calls to come from the correct
thread.
Therefore, address this issue in ublk_drv by allowing each I/O to have
its own daemon task. Two I/Os in the same queue are now allowed to be
serviced by different daemon tasks - this was not possible before.
Imbalanced load can then be balanced across all ublk server threads by
having the ublk server threads issue FETCH_REQs in a round-robin manner.
As a small toy example, consider a system with a single ublk device
having 2 queues, each of depth 4. A ublk server having 4 threads could
issue its FETCH_REQs against this device as follows (where each entry is
the qid,tag pair that the FETCH_REQ targets):
ublk server thread: T0 T1 T2 T3
0,0 0,1 0,2 0,3
1,3 1,0 1,1 1,2
This setup allows for load that is concentrated on one hctx/ublk_queue
to be spread out across all ublk server threads, alleviating the issue
described above.
Add the new UBLK_F_PER_IO_DAEMON feature to ublk_drv, which ublk servers
can use to essentially test for the presence of this change and tailor
their behavior accordingly.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-1-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi: Add driver for Dasharo devices supporting fans and
temperatures monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace using
power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering more
than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to new
variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the enlarged
scope
- power: supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and "cell
imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ABI: testing: sysfs-class-oxp:
- add missing documentation
- add tt_led attribute documentation
Add AMD ISP platform config for OV05C10:
- Add AMD ISP platform config for OV05C10
alienware-wmi-wmax:
- Add a DebugFS interface
- Add HWMON support
- Add support for manual fan control
- Add support for the "custom" thermal profile
- Expose GPIO debug methods
- Fix awcc_hwmon_fans_init() label logic
- Fix uninitialized bitmap in awcc_hwmon_fans_init()
- Improve ID processing
- Improve internal AWCC API
- Improve platform profile probe
- Modify supported_thermal_profiles[]
- Rename thermal related symbols
amd/hsmp: acpi:
- Add sysfs files to display HSMP telemetry
amd/hsmp:
- fix building with CONFIG_HWMON=m
- Report power via hwmon sensors
- Use a single DRIVER_VERSION for all hsmp modules
arm64: huawei-gaokun-ec:
- Remove unneeded semicolon
asus-wmi:
- fix build without CONFIG_SUSPEND
- Refactor Ally suspend/resume
Avoid -Wflex-array-member-not-at-end warning:
- Avoid -Wflex-array-member-not-at-end warning
barco-p50:
- use new GPIO line value setter callbacks
dell-ddv:
- Expose the battery health to userspace
- Expose the battery manufacture date to userspace
- Implement the battery matching algorithm
dell-pc:
- Propagate errors when detecting feature support
- Transition to faux device
- Use non-atomic bitmap operations
docs: ABI:
- Fix "aassociated" to "associated"
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
Documentation: ABI:
- Add sysfs platform and debugfs ABI documentation for alienware-wmi
Documentation: admin-guide: laptops:
- Add documentation for alienware-wmi
Documentation: admin-guide: pm:
- Add documentation for agent_types
- Add documentation for die_id
Documentation: wmi: alienware-wmi:
- Add GPIO control documentation
Documentation: wmi:
- Improve and update alienware-wmi documentation
Do not enable by default during compile testing:
- Do not enable by default during compile testing
hid-asus:
- check ROG Ally MCU version and warn
hwmon:
- (oxp-sensors) Add all OneXFly variants
- (oxp-sensors) Distinguish the X1 variants
int0002:
- use new GPIO line value setter callbacks
int3472:
- Add handshake pin support
- Add skl_int3472_register_clock() helper
- Avoid GPIO regulator spikes
- Debug log when remapping pins
- Drop unused gpio field from struct int3472_gpio_regulator
- Export int3472_discrete_parse_crs()
- For mt9m114 sensors map powerdown to powerenable
- Make regulator supply name configurable
- Move common.h to public includes, symbols to INTEL_INT3472
- Prepare for registering more than 1 GPIO regulator
- Remove unused sensor_config struct member
- Rework AVDD second sensor quirk handling
- Stop setting a supply-name for GPIO regulators
- Stop using devm_gpiod_get()
intel/pmc:
- Convert index variables to be unsigned
- Create Intel PMC SSRAM Telemetry driver
- Improve pmc_core_get_lpm_req()
- Move error handling to init function
- Move PMC Core related functions
- Move PMC devid to core.h
- Remove unneeded header file inclusion
- Remove unneeded io operations
- Rename core_ssram to ssram_telemetry
- Use devm for mutex_init
intel: power-domains:
- Add interface to get Linux die ID
intel-uncore-freq:
- Add attributes to show agent types
- Add attributes to show die_id
intel/vsec:
- Change return type of intel_vsec_register
Introduce dasharo-acpi platform driver:
- Introduce dasharo-acpi platform driver
ISST:
- Do Not Restore SST MSRs on CPU Online Operation
- Support SST-PP revision 2
- Support SST-TF revision 2
- Update minor version
mellanox:
- Cosmetic changes to improve code style
- Introduce support of Nvidia smart switch
- Rename field to improve code readability
mlxbf-pmc:
- Support additional PMC blocks
mlx-platform:
- Add support for new Nvidia system
mlxreg-dpu:
- Add initial support for Nvidia DPU
- Fix smatch warnings
nvsw-sn2200:
- Add support for new system flavour
- Fix .items in nvsw_sn2201_busbar_hotplug
oxpec:
- Add a lower bounds check in oxp_psy_ext_set_prop()
- Add charge threshold and behaviour to OneXPlayer
- Add support for the OneXPlayer G1
- Add turbo led support to X1 devices
- Adhere to sysfs-class-hwmon and enable pwm on 2
- Convert defines to using tabs
- Follow reverse xmas convention for tt_toggle
- Make turbo val apply a bitmask
- Move fan speed read to separate function
- Move hwmon/oxp-sensors to platform/x86
- Move pwm_enable read to its own function
- Move pwm value read/write to separate functions
- Rename ec group to tt_toggle
- Rename rval to ret in tt_toggle
portwell-ec:
- Add GPIO and WDT driver for Portwell EC
power: supply:
- add inhibit-charge-awake to charge_behaviour
power: supply: core:
- Add additional health status values
silicom:
- use new GPIO line value setter callbacks
sony-laptop:
- Remove unused sony laptop camera code
thermal/drivers/acerhdf:
- Constify struct thermal_zone_device_ops
thinkpad-acpi:
- Add support for new hotkey for camera shutter switch
tools/power/x86/intel-speed-select:
- Skip uncore frequency update
- Support SST PP revision 2 fields
- v1.23 release
tuxedo:
- Add virtual LampArray for TUXEDO NB04 devices
- Prevent invalid Kconfig state
Use strscpy()/scnprintf() with acpi_device_name/class():
- Use strscpy()/scnprintf() with acpi_device_name/class()
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaDWJ7wAKCRBZrE9hU+XO
MT8JAQDWW6qBoXuqpd6Yx1oOyROc6gJMQAsS9sNc7I60mGooEAEAnTLhOHDGkKb5
av1fz/SmXGl7joeRYkZV9FRzJ/26AAk=
=ytxa
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
A new virtio RTC driver.
vhost scsi now logs write descriptors so migration works.
Some hardening work in virtio core.
An old spec compliance issue fixed in vhost net.
A couple of cleanups, fixes in vringh, virtio-pci, vdpa.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmg2ukkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpXCYIAKvqsUujiF0W1Kv2uqrztrWVYPL5wEOgiwfD
ElxeYvkzGsaBHW1zfAxUz4az5K9qigNdm9JE55Kc79Sd/5yuLASXZtcma5d5Y4G6
JS45EhsCFxbJjtIFv2hXlTBTuo0LkxDRNzCX/CtNL/k4+H0vCn5pPfv19hUTT1T4
BH+/JA64FAquSCnMK10CG3byT8hfchlxM5TV4iQriolaOtN4gCroLp2lSzT0D2Ux
cT8e+2IwEjdx3iRkrAaNJSbpmz34xUu3TsaR7KxTZ+a0/+Zcs6aBVOhkqsyPLnPf
XK1EDwtizT+Kz6XXei+kH8sWhARQ4dU4iNn4aMKmf3937QIOSYs=
=VJy5
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A new virtio RTC driver
- vhost scsi now logs write descriptors so migration works
- Some hardening work in virtio core
- An old spec compliance issue fixed in vhost net
- A couple of cleanups, fixes in vringh, virtio-pci, vdpa
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: reject shm region if length is zero
virtio_rtc: Add RTC class driver
virtio_rtc: Add Arm Generic Timer cross-timestamping
virtio_rtc: Add PTP clocks
virtio_rtc: Add module and driver core
vringh: use bvec_kmap_local
vhost: vringh: Use matching allocation type in resize_iovec()
virtio-pci: Fix result size returned for the admin command completion
vdpa/octeon_ep: Control PCI dev enabling manually
vhost-scsi: log event queue write descriptors
vhost-scsi: log control queue write descriptors
vhost-scsi: log I/O queue write descriptors
vhost-scsi: adjust vhost_scsi_get_desc() to log vring descriptors
vhost: modify vhost_log_write() for broader users
* Add large stage-2 mapping (THP) support for non-protected guests when
pKVM is enabled, clawing back some performance.
* Enable nested virtualisation support on systems that support it,
though it is disabled by default.
* Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
* Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is automatically
extracted from the published JSON files), and helps dealing with the
evolution of the architecture.
* Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
* New selftest checking the pKVM ownership transition rules
* Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
* Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
* Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
* Add a new selftest for the SVE host state being corrupted by a
guest.
* Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
* Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
* Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
* and the usual random cleanups.
LoongArch:
* Don't flush tlb if the host supports hardware page table walks.
* Add KVM selftests support.
RISC-V:
* Add vector registers to get-reg-list selftest
* VCPU reset related improvements
* Remove scounteren initialization from VCPU reset
* Support VCPU reset from userspace using set_mpstate() ioctl
x86:
* Initial support for TDX in KVM. This finally makes it possible to use the
TDX module to run confidential guests on Intel processors. This is quite a
large series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some TDVMCALLs
to userspace, and handling several special VM exits from the TDX module.
This has been in the works for literally years and it's not really possible
to describe everything here, so I'll defer to the various merge commits
up to and including commit 7bcf7246c4 ("Merge branch 'kvm-tdx-finish-initial'
into HEAD").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg02hwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNnkwf/db4xeWKSMseCIvBVR+ObDn3LXhwT
hAgmTkDkP1zq9RfbfJSbUA1DXRwfP+f1sWySLMWECkFEQW9fGIJF9fOQRDSXKmhX
158U3+FEt+3jxLRCGFd4zyXAqyY3C8JSkPUyJZxCpUbXtB5tdDNac4rZAXKDULwe
sUi0OW/kFDM2yt369pBGQAGdN+75/oOrYISGOSvMXHxjccNqvveX8MUhpBjYIuuj
73iBWmsfv3vCtam56Racz3C3v44ie498PmWFtnB0R+CVfWfrnUAaRiGWx+egLiBW
dBPDiZywMn++prmphEUFgaStDTQy23JBLJ8+RvHkp+o5GaTISKJB3nedZQ==
=adZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c4 ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
-----BEGIN PGP SIGNATURE-----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=j3t8
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- remove disgusting turds
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
-----BEGIN PGP SIGNATURE-----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=jpVr
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
-----BEGIN PGP SIGNATURE-----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=4pGJ
-----END PGP SIGNATURE-----
Merge tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
Expose the virtio-rtc UTC-like clock as an RTC clock to userspace - if it
is present, and if it does not step on leap seconds. The RTC class enables
the virtio-rtc device to resume the system from sleep states on RTC alarm.
Support RTC alarm if the virtio-rtc alarm feature is present. The
virtio-rtc device signals an alarm by marking an alarmq buffer as used.
Peculiarities
-------------
A virtio-rtc clock is a bit special for an RTC clock in that
- the clock may step (also backwards) autonomously at any time and
- the device, and its notification mechanism, will be reset during boot or
resume from sleep.
The virtio-rtc device avoids that the driver might miss an alarm. The
device signals an alarm whenever the clock has reached or passed the alarm
time, and also when the device is reset (on boot or resume from sleep), if
the alarm time is in the past.
Open Issue
----------
The CLOCK_BOOTTIME_ALARM will use the RTC clock to wake up from sleep, and
implicitly assumes that no RTC clock steps will occur during sleep. The RTC
class driver does not know whether the current alarm is a real-time alarm
or a boot-time alarm.
Perhaps this might be handled by the driver also setting a virtio-rtc
monotonic alarm (which uses a clock similar to CLOCK_BOOTTIME_ALARM). The
virtio-rtc monotonic alarm would just be used to wake up in case it was a
CLOCK_BOOTTIME_ALARM alarm.
Otherwise, the behavior should not differ from other RTC class drivers.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Message-Id: <20250509160734.1772-5-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the virtio_rtc module and driver core. The virtio_rtc module implements
a driver compatible with the proposed Virtio RTC device specification.
The Virtio RTC (Real Time Clock) device provides information about current
time. The device can provide different clocks, e.g. for the UTC or TAI time
standards, or for physical time elapsed since some past epoch. The driver
can read the clocks with simple or more accurate methods.
Implement the core, which interacts with the Virtio RTC device. Apart from
this, the core does not expose functionality outside of the virtio_rtc
module. Follow-up patches will expose PTP clocks and an RTC Class device.
Provide synchronous messaging, which is enough for the expected time
synchronization use cases through PTP clocks (similar to ptp_kvm) or RTC
Class device.
Signed-off-by: Peter Hilber <quic_philber@quicinc.com>
Message-Id: <20250509160734.1772-2-quic_philber@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:
1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
peer with WGPEER_F_REMOVE_ME.
With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.
[192.168.0.2, 192.168.0.3] <-- Initial state
[] <-- Step 1: Allowed ips removed for peer
[192.168.0.3] <-- Step 2: Allowed ips added back for peer
This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.
/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.
The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.
Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.
A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.
$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32
When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.
Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to
the Intel driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the
x86 and PowerPC platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker,
Ian Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang,
Sandipan Das, Thorsten Blum)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tPRs
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
Futexes:
- Add support for task local hash maps (Sebastian Andrzej Siewior,
Peter Zijlstra)
- Implement the FUTEX2_NUMA ABI, which feature extends the futex
interface to be NUMA-aware. On NUMA-aware futexes a second u32
word containing the NUMA node is added to after the u32 futex value
word. (Peter Zijlstra)
- Implement the FUTEX2_MPOL ABI, which feature extends the futex
interface to be mempolicy-aware as well, to further refine futex
node mappings and lookups. (Peter Zijlstra)
Locking primitives:
- Misc cleanups (Andy Shevchenko, Borislav Petkov, Colin Ian King,
Ingo Molnar, Nam Cao, Peter Zijlstra)
Lockdep:
- Prevent abuse of lockdep subclasses (Waiman Long)
- Add number of dynamic keys to /proc/lockdep_stats (Waiman Long)
Plus misc cleanups and fixes.
Note that the tree includes the following dependent out-of-subsystem
changes as well:
- rcuref: Provide rcuref_is_dead()
- mm: Add vmalloc_huge_node()
- mm: Add the mmap_read_lock guard to <linux/mmap_lock.h>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=La/x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futexes:
- Add support for task local hash maps (Sebastian Andrzej Siewior,
Peter Zijlstra)
- Implement the FUTEX2_NUMA ABI, which feature extends the futex
interface to be NUMA-aware. On NUMA-aware futexes a second u32 word
containing the NUMA node is added to after the u32 futex value word
(Peter Zijlstra)
- Implement the FUTEX2_MPOL ABI, which feature extends the futex
interface to be mempolicy-aware as well, to further refine futex
node mappings and lookups (Peter Zijlstra)
Locking primitives:
- Misc cleanups (Andy Shevchenko, Borislav Petkov, Colin Ian King,
Ingo Molnar, Nam Cao, Peter Zijlstra)
Lockdep:
- Prevent abuse of lockdep subclasses (Waiman Long)
- Add number of dynamic keys to /proc/lockdep_stats (Waiman Long)
Plus misc cleanups and fixes"
* tag 'locking-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
selftests/futex: Fix spelling mistake "unitiliazed" -> "uninitialized"
futex: Correct the kernedoc return value for futex_wait_setup().
tools headers: Synchronize prctl.h ABI header
futex: Use RCU_INIT_POINTER() in futex_mm_init().
selftests/futex: Use TAP output in futex_numa_mpol
selftests/futex: Use TAP output in futex_priv_hash
futex: Fix kernel-doc comments
futex: Relax the rcu_assign_pointer() assignment of mm->futex_phash in futex_mm_init()
futex: Fix outdated comment in struct restart_block
locking/lockdep: Add number of dynamic keys to /proc/lockdep_stats
locking/lockdep: Prevent abuse of lockdep subclass
locking/lockdep: Move hlock_equal() to the respective #ifdeffery
futex,selftests: Add another FUTEX2_NUMA selftest
selftests/futex: Add futex_numa_mpol
selftests/futex: Add futex_priv_hash
selftests/futex: Build without headers nonsense
tools/perf: Allow to select the number of hash buckets
tools headers: Synchronize prctl.h ABI header
futex: Implement FUTEX2_MPOL
futex: Implement FUTEX2_NUMA
...
Add support for "hardware-wrapped inline encryption keys" to fscrypt.
When enabled on supported platforms, this feature protects file contents
keys from certain attacks, such as cold boot attacks.
This feature uses the block layer support for wrapped keys which was
merged in 6.15. Wrapped key support has existed out-of-tree in Android
for a long time, and it's finally ready for upstream now that there is a
platform on which it works end-to-end with upstream. Specifically,
it works on the Qualcomm SM8650 HDK, using the Qualcomm ICE (Inline
Crypto Engine) and HWKM (Hardware Key Manager). The corresponding
driver support is included in the SCSI tree for 6.16. Validation for
this feature includes two new tests that were already merged into
xfstests (generic/368 and generic/369).
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaDNaqxQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK1K7AP92naB88sRzH1KG7Oic9+dMK+PImARP
f15ebG2TzQ3qBgEAreqtNmtCNOH7pguYsTeAcX3Y243vzIkwkDRGk7k+aAI=
=P6Sj
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt update from Eric Biggers:
"Add support for 'hardware-wrapped inline encryption keys' to fscrypt.
When enabled on supported platforms, this feature protects file
contents keys from certain attacks, such as cold boot attacks.
This feature uses the block layer support for wrapped keys which was
merged in 6.15. Wrapped key support has existed out-of-tree in Android
for a long time, and it's finally ready for upstream now that there is
a platform on which it works end-to-end with upstream.
Specifically, it works on the Qualcomm SM8650 HDK, using the Qualcomm
ICE (Inline Crypto Engine) and HWKM (Hardware Key Manager). The
corresponding driver support is included in the SCSI tree for 6.16.
Validation for this feature includes two new tests that were already
merged into xfstests (generic/368 and generic/369)"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: add support for hardware-wrapped keys
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
-----BEGIN PGP SIGNATURE-----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=Jju3
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaDQXTQAKCRBcsMJ8RxYu
YwUHAYDYYm9oit6AIr0AgTXBMJ+DHyqaszBy0VT2jQUP+yXxyrQc46QExXKU9YQV
ffmGRAsBgN7ZdDI8D5qWySyOynB3b1Jn3/0jY82GscFK0k0oX3EtxbN9MdrovbgK
qyO66BVx7w==
=pG5y
-----END PGP SIGNATURE-----
Merge tag 'xfs-merge-6.16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Carlos Maiolino:
- Atomic writes for XFS
- Remove experimental warnings for pNFS, scrub and parent pointers
* tag 'xfs-merge-6.16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
xfs: add inode to zone caching for data placement
xfs: free the item in xfs_mru_cache_insert on failure
xfs: remove the EXPERIMENTAL warning for pNFS
xfs: remove some EXPERIMENTAL warnings
xfs: Remove deprecated xfs_bufd sysctl parameters
xfs: stop using set_blocksize
xfs: allow sysadmins to specify a maximum atomic write limit at mount time
xfs: update atomic write limits
xfs: add xfs_calc_atomic_write_unit_max()
xfs: add xfs_file_dio_write_atomic()
xfs: commit CoW-based atomic writes atomically
xfs: add large atomic writes checks in xfs_direct_write_iomap_begin()
xfs: add xfs_atomic_write_cow_iomap_begin()
xfs: refine atomic write size check in xfs_file_write_iter()
xfs: refactor xfs_reflink_end_cow_extent()
xfs: allow block allocator to take an alignment hint
xfs: ignore HW which cannot atomic write a single block
xfs: add helpers to compute transaction reservation for finishing intent items
xfs: add helpers to compute log item overhead
xfs: separate out setting buftarg atomic writes limits
...
-----BEGIN PGP SIGNATURE-----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=k8SF
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Avoid indirect function calls in io-wq for executing and freeing
work.
The design of io-wq is such that it can be a generic mechanism, but
as it's just used by io_uring now, may as well avoid these indirect
calls
- Clean up registered buffers for networking
- Add support for IORING_OP_PIPE. Pretty straight forward, allows
creating pipes with io_uring, particularly useful for having these be
instantiated as direct descriptors
- Clean up the coalescing support fore registered buffers
- Add support for multiple interface queues for zero-copy rx
networking. As this feature was merged for 6.15 it supported just a
single ifq per ring
- Clean up the eventfd support
- Add dma-buf support to zero-copy rx
- Clean up and improving the request draining support
- Clean up provided buffer support, most notably with an eye toward
making the legacy support less intrusive
- Minor fdinfo cleanups, dropping support for dumping what credentials
are registered
- Improve support for overflow CQE handling, getting rid of GFP_ATOMIC
for allocating overflow entries where possible
- Improve detection of cases where io-wq doesn't need to spawn a new
worker unnecessarily
- Various little cleanups
* tag 'for-6.16/io_uring-20250523' of git://git.kernel.dk/linux: (59 commits)
io_uring/cmd: warn on reg buf imports by ineligible cmds
io_uring/io-wq: only create a new worker if it can make progress
io_uring/io-wq: ignore non-busy worker going to sleep
io_uring/io-wq: move hash helpers to the top
trace/io_uring: fix io_uring_local_work_run ctx documentation
io_uring: finish IOU_OK -> IOU_COMPLETE transition
io_uring: add new helpers for posting overflows
io_uring: pass in struct io_big_cqe to io_alloc_ocqe()
io_uring: make io_alloc_ocqe() take a struct io_cqe pointer
io_uring: split alloc and add of overflow
io_uring: open code io_req_cqe_overflow()
io_uring/fdinfo: get rid of dumping credentials
io_uring/fdinfo: only compile if CONFIG_PROC_FS is set
io_uring/kbuf: unify legacy buf provision and removal
io_uring/kbuf: refactor __io_remove_buffers
io_uring/kbuf: don't compute size twice on prep
io_uring/kbuf: drop extra vars in io_register_pbuf_ring
io_uring/kbuf: use mem_is_zero()
io_uring/kbuf: account ring io_buffer_list memory
io_uring: drain based on allocates reqs
...
-----BEGIN PGP SIGNATURE-----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=1PNK
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
oliqAQCVdrBn7D2+dB04hjefFq6W6LhyLGrtCCliflicN5SyxAD+PHHiB9nFKe6J
xQkaNArCJjPd2QEx73aGjHzi3UQq6Qs=
=Pk9c
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This adds support for sending coredumps over an AF_UNIX socket. It
also makes (implicit) use of the new SO_PEERPIDFD ability to hand out
pidfds for reaped peer tasks
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a saf way to
handle them instead of relying on super privileged coredumping helpers
This will also be significantly more lightweight since the kernel
doens't have to do a fork()+exec() for each crashing process to spawn
a usermodehelper. Instead the kernel just connects to the AF_UNIX
socket and userspace can process it concurrently however it sees fit.
Support for userspace is incoming starting with systemd-coredump
There's more work coming in that direction next cycle. The rest below
goes into some details and background
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional
parameters pass information about the task that is generating the
coredump to the binary that processes the coredump
In the example the core_pattern shown causes the kernel to spawn
systemd-coredump as a usermode helper. There's various conceptual
consequences of this (non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors
are closed. That specifically includes 1 (stdout) and 2 (stderr).
This has already caused bugs because userspace assumed that this
cannot happen (Whether or not this is a sane assumption is
irrelevant)
- systemd-coredump will be spawned as a child of system_unbound_wq.
So it is not a child of any userspace process and specifically not
a child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe
- A new usermode helper has to be spawned for each crashing process
This adds a new mode:
(3) Dumping into an AF_UNIX socket
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket:
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump. That is a huge attack vector right now
- By setting core_pipe_limit non-zero userspace can guarantee that
the crashing task cannot be reaped behind it's back and thus
process all necessary information in /proc/<pid>. The SO_PEERPIDFD
can be used to detect whether /proc/<pid> still refers to the same
process
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX socket directly
- The pidfd for the crashing task will contain information how the
task coredumps. The PIDFD_GET_INFO ioctl gained a new flag
PIDFD_INFO_COREDUMP which can be used to retreive the coredump
information
If the coredump gets a new coredump client connection the kernel
guarantees that PIDFD_INFO_COREDUMP information is available.
Currently the following information is provided in the new
@coredump_mask extension to struct pidfd_info:
* PIDFD_COREDUMPED is raised if the task did actually coredump
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping
(e.g., undumpable)
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should
be treated as sensitive and the coredump server should restrict
access to the generated coredump to sufficiently privileged
users"
* tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mips, net: ensure that SOCK_COREDUMP is defined
selftests/coredump: add tests for AF_UNIX coredumps
selftests/pidfd: add PIDFD_INFO_COREDUMP infrastructure
coredump: validate socket name as it is written
coredump: show supported coredump modes
pidfs, coredump: add PIDFD_INFO_COREDUMP
coredump: add coredump socket
coredump: reflow dump helpers a little
coredump: massage do_coredump()
coredump: massage format_corename()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
ov4zAP4yfqKBAz6eMt9CzDgHCdVQJ9Nuur1EiRdot3maPzHTcQEA2hVkJrvVo1Y/
jCVAf7gmGX1Uu6nCUF6Vjy35g8i20gA=
=nzYS
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
"Features:
- Allow handing out pidfds for reaped tasks for AF_UNIX SO_PEERPIDFD
socket option
SO_PEERPIDFD is a socket option that allows to retrieve a pidfd for
the process that called connect() or listen(). This is heavily used
to safely authenticate clients in userspace avoiding security bugs
due to pid recycling races (dbus, polkit, systemd, etc.)
SO_PEERPIDFD currently doesn't support handing out pidfds if the
sk->sk_peer_pid thread-group leader has already been reaped. In
this case it currently returns EINVAL. Userspace still wants to get
a pidfd for a reaped process to have a stable handle it can pass
on. This is especially useful now that it is possible to retrieve
exit information through a pidfd via the PIDFD_GET_INFO ioctl()'s
PIDFD_INFO_EXIT flag
Another summary has been provided by David Rheinsberg:
> A pidfd can outlive the task it refers to, and thus user-space
> must already be prepared that the task underlying a pidfd is
> gone at the time they get their hands on the pidfd. For
> instance, resolving the pidfd to a PID via the fdinfo must be
> prepared to read `-1`.
>
> Despite user-space knowing that a pidfd might be stale, several
> kernel APIs currently add another layer that checks for this. In
> particular, SO_PEERPIDFD returns `EINVAL` if the peer-task was
> already reaped, but returns a stale pidfd if the task is reaped
> immediately after the respective alive-check.
>
> This has the unfortunate effect that user-space now has two ways
> to check for the exact same scenario: A syscall might return
> EINVAL/ESRCH/... *or* the pidfd might be stale, even though
> there is no particular reason to distinguish both cases. This
> also propagates through user-space APIs, which pass on pidfds.
> They must be prepared to pass on `-1` *or* the pidfd, because
> there is no guaranteed way to get a stale pidfd from the kernel.
>
> Userspace must already deal with a pidfd referring to a reaped
> task as the task may exit and get reaped at any time will there
> are still many pidfds referring to it
In order to allow handing out reaped pidfd SO_PEERPIDFD needs to
ensure that PIDFD_INFO_EXIT information is available whenever a
pidfd for a reaped task is created by PIDFD_INFO_EXIT. The uapi
promises that reaped pidfds are only handed out if it is guaranteed
that the caller sees the exit information:
TEST_F(pidfd_info, success_reaped)
{
struct pidfd_info info = {
.mask = PIDFD_INFO_CGROUPID | PIDFD_INFO_EXIT,
};
/*
* Process has already been reaped and PIDFD_INFO_EXIT been set.
* Verify that we can retrieve the exit status of the process.
*/
ASSERT_EQ(ioctl(self->child_pidfd4, PIDFD_GET_INFO, &info), 0);
ASSERT_FALSE(!!(info.mask & PIDFD_INFO_CREDS));
ASSERT_TRUE(!!(info.mask & PIDFD_INFO_EXIT));
ASSERT_TRUE(WIFEXITED(info.exit_code));
ASSERT_EQ(WEXITSTATUS(info.exit_code), 0);
}
To hand out pidfds for reaped processes we thus allocate a pidfs
entry for the relevant sk->sk_peer_pid at the time the
sk->sk_peer_pid is stashed and drop it when the socket is
destroyed. This guarantees that exit information will always be
recorded for the sk->sk_peer_pid task and we can hand out pidfds
for reaped processes
- Hand a pidfd to the coredump usermode helper process
Give userspace a way to instruct the kernel to install a pidfd for
the crashing process into the process started as a usermode helper.
There's still tricky race-windows that cannot be easily or
sometimes not closed at all by userspace. There's various ways like
looking at the start time of a process to make sure that the
usermode helper process is started after the crashing process but
it's all very very brittle and fraught with peril
The crashed-but-not-reaped process can be killed by userspace
before coredump processing programs like systemd-coredump have had
time to manually open a PIDFD from the PID the kernel provides
them, which means they can be tricked into reading from an
arbitrary process, and they run with full privileges as they are
usermode helper processes
Even if that specific race-window wouldn't exist it's still the
safest and cleanest way to let the kernel provide the pidfd
directly instead of requiring userspace to do it manually. In
parallel with this commit we already have systemd adding support
for this in [1]
When the usermode helper process is forked we install a pidfd file
descriptor three into the usermode helper's file descriptor table
so it's available to the exec'd program
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is
empty and can thus always use three as the file descriptor number
Note, that we'll install a pidfd for the thread-group leader even
if a subthread is calling do_coredump(). We know that task linkage
hasn't been removed yet and even if this @current isn't the actual
thread-group leader we know that the thread-group leader cannot be
reaped until
@current has exited
- Allow telling when a task has not been found from finding the wrong
task when creating a pidfd
We currently report EINVAL whenever a struct pid has no tasked
attached anymore thereby conflating two concepts:
(1) The task has already been reaped
(2) The caller requested a pidfd for a thread-group leader but the
pid actually references a struct pid that isn't used as a
thread-group leader
This is causing issues for non-threaded workloads as in where they
expect ESRCH to be reported, not EINVAL
So allow userspace to reliably distinguish between (1) and (2)
- Make it possible to detect when a pidfs entry would outlive the
struct pid it pinned
- Add a range of new selftests
Cleanups:
- Remove unneeded NULL check from pidfd_prepare() for passed struct
pid
- Avoid pointless reference count bump during release_task()
Fixes:
- Various fixes to the pidfd and coredump selftests
- Fix error handling for replace_fd() when spawning coredump usermode
helper"
* tag 'vfs-6.16-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: detect refcount bugs
coredump: hand a pidfd to the usermode coredump helper
coredump: fix error handling for replace_fd()
pidfs: move O_RDWR into pidfs_alloc_file()
selftests: coredump: Raise timeout to 2 minutes
selftests: coredump: Fix test failure for slow machines
selftests: coredump: Properly initialize pointer
net, pidfs: enable handing out pidfds for reaped sk->sk_peer_pid
pidfs: get rid of __pidfd_prepare()
net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid
pidfs: register pid in pidfs
net, pidfd: report EINVAL for ESRCH
release_task: kill the no longer needed get/put_pid(thread_pid)
pidfs: ensure consistent ENOENT/ESRCH reporting
exit: move wake_up_all() pidfd waiters into __unhash_process()
selftest/pidfd: add test for thread-group leader pidfd open for thread
pidfd: improve uapi when task isn't found
pidfd: remove unneeded NULL check from pidfd_prepare()
selftests/pidfd: adapt to recent changes
-----BEGIN PGP SIGNATURE-----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=fBhd
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add feature UBLK_F_QUIESCE, which adds control command `UBLK_U_CMD_QUIESCE_DEV`
for quiescing device, then device state can become `UBLK_S_DEV_QUIESCED`
or `UBLK_S_DEV_FAIL_IO` finally from ublk_ch_release() with ublk server
cooperation.
This feature can help to support to upgrade ublk server application by
shutting down ublk server gracefully, meantime keep ublk block device
persistent during the upgrading period.
The feature is only available for UBLK_F_USER_RECOVERY.
Suggested-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB632807AB7CDCE77D1E5AB7D0A9B92@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Notify user space if netdev hooks are updated due to netdev add/remove
events. Send minimal notification messages by introducing
NFT_MSG_NEWDEV/DELDEV message types describing a single device only.
Upon NETDEV_CHANGENAME, the callback has no information about the
interface's old name. To provide a clear message to user space, include
the hook's stored interface name in the notification.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add the minimal relevant info needed for userspace ("nftables monitor
trace") to provide the conntrack view of the packet:
- state (new, related, established)
- direction (original, reply)
- status (e.g., if connection is subject to dnat)
- id (allows to query ctnetlink for remaining conntrack state info)
Example:
trace id a62 inet filter PRE_RAW packet: iif "enp0s3" ether [..]
[..]
trace id a62 inet filter PRE_MANGLE conntrack: ct direction original ct state new ct id 32
trace id a62 inet filter PRE_MANGLE packet: [..]
[..]
trace id a62 inet filter IN conntrack: ct direction original ct state new ct status dnat-done ct id 32
[..]
In this case one can see that while NAT is active, the new connection
isn't subject to a translation.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* kvm-arm64/nv-nv:
: .
: Flick the switch on the NV support by adding the missing piece
: in the form of the VNCR page management. From the cover letter:
:
: "This is probably the most interesting bit of the whole NV adventure.
: So far, everything else has been a walk in the park, but this one is
: where the real fun takes place.
:
: With FEAT_NV2, most of the NV support revolves around tricking a guest
: into accessing memory while it tries to access system registers. The
: hypervisor's job is to handle the context switch of the actual
: registers with the state in memory as needed."
: .
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
KVM: arm64: Document NV caps and vcpu flags
KVM: arm64: Allow userspace to request KVM_ARM_VCPU_EL2*
KVM: arm64: nv: Remove dead code from ERET handling
KVM: arm64: nv: Plumb TLBI S1E2 into system instruction dispatch
KVM: arm64: nv: Add S1 TLB invalidation primitive for VNCR_EL2
KVM: arm64: nv: Program host's VNCR_EL2 to the fixmap address
KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU notifiers
KVM: arm64: nv: Handle mapping of VNCR_EL2 at EL2
KVM: arm64: nv: Handle VNCR_EL2-triggered faults
KVM: arm64: nv: Add userspace and guest handling of VNCR_EL2
KVM: arm64: nv: Add pseudo-TLB backing VNCR_EL2
KVM: arm64: nv: Don't adjust PSTATE.M when L2 is nesting
KVM: arm64: nv: Move TLBI range decoding to a helper
KVM: arm64: nv: Snapshot S1 ASID tagging information during walk
KVM: arm64: nv: Extract translation helper from the AT code
KVM: arm64: nv: Allocate VNCR page when required
arm64: sysreg: Add layout for VNCR_EL2
Signed-off-by: Marc Zyngier <maz@kernel.org>
UBLK_F_AUTO_BUF_REG requires that the buffer registered automatically
is unregistered in same `io_ring_ctx`, so check it explicitly.
Document this requirement for UBLK_F_AUTO_BUF_REG.
Drop WARN_ON_ONCE() which is triggered from userspace code path.
Fixes: 99c1e4eb6a ("ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522152043.399824-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Multi-PTP source support within a network topology has been merged,
but the hardware timestamp source is not yet exposed to users.
Currently, users only see the PTP index, which does not indicate
whether the timestamp comes from a PHY or a MAC.
Add support for reporting the hwtstamp source using a
hwtstamp-source field, alongside hwtstamp-phyindex, to describe
the origin of the hardware timestamp.
Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When applying a recent commit to the <uapi/linux/perf_event.h>
header I noticed that we have accumulated quite a bit of
historic noise in this header, so do a bit of spring cleaning:
- Define bitfields in a vertically aligned fashion, like
perf_event_mmap_page::capabilities already does. This
makes it easier to see the distribution and sizing of
bits within a word, at a glance. The following is much
more readable:
__u64 cap_bit0 : 1,
cap_bit0_is_deprecated : 1,
cap_user_rdpmc : 1,
cap_user_time : 1,
cap_user_time_zero : 1,
cap_user_time_short : 1,
cap_____res : 58;
Than:
__u64 cap_bit0:1,
cap_bit0_is_deprecated:1,
cap_user_rdpmc:1,
cap_user_time:1,
cap_user_time_zero:1,
cap_user_time_short:1,
cap_____res:58;
So convert all bitfield definitions from the latter style to the
former style.
- Fix typos and grammar
- Fix capitalization
- Remove whitespace noise
- Harmonize the definitions of various generations and groups of
PERF_MEM_ ABI values.
- Vertically align all definitions and assignments to the same
column (48), as the first definition (enum perf_type_id),
throughout the entire header.
- And in general make the code and comments to be more in sync
with each other and to be more readable overall.
No change in functionality.
Copy the changes over to tools/include/uapi/linux/perf_event.h.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
AAUX data for PERF_SAMPLE_AUX appears last. PERF_SAMPLE_CGROUP is
missing from the comment.
This makes the <uapi/linux/perf_event.h> comment match that in the
perf_event_open man page.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
Extend the PIDFD_INFO_COREDUMP ioctl() with the new PIDFD_INFO_COREDUMP
mask flag. This adds the @coredump_mask field to struct pidfd_info.
When a task coredumps the kernel will provide the following information
to userspace in @coredump_mask:
* PIDFD_COREDUMPED is raised if the task did actually coredump.
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping (e.g.,
undumpable).
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server.
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should be
treated as sensitive and the coredump server should restrict to the
generated coredump to sufficiently privileged users.
The kernel guarantees that by the time the connection is made the all
PIDFD_INFO_COREDUMP info is available.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-5-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The console dimension and cursor position are available through the
/dev/vcsa interface already. However the /dev/vcsa header format uses
single-byte fields therefore those values are clamped to 255.
As surprizing as this may seem, some people do use 240-column 67-row
screens (a 1920x1080 monitor with 8x16 pixel fonts) which is getting
close to the limit. Monitors with higher resolution are not uncommon
these days (3840x2160 producing a 480x135 character display) and it is
just a matter of time before someone with, say, a braille display using
the Linux VT console and BRLTTY on such a screen reports a bug about
missing and oddly misaligned screen content.
Let's add VT_GETCONSIZECSRPOS for the retrieval of console size and cursor
position without byte-sized limitations. The actual console size limit as
encoded in vt.c is 32767x32767 so using a short here is appropriate. Then
this can be used to get the cursor position when /dev/vcsa reports 255.
The screen dimension may already be obtained using TIOCGWINSZ and adding
the same information to VT_GETCONSIZECSRPOS might be redundant. However
applications that care about cursor position also care about display
size and having 2 separate system calls to obtain them separately is
wasteful. Also, the cursor position can be queried by writing "\e[6n" to
a tty and reading back the result but that may be done only by the actual
application using that tty and not a sideline observer.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20250520171851.1219676-3-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is comprised of 3 aspects:
- Take note of when applications advertise bracketed paste support via
"\e[?2004h" and "\e[?2004l".
- Insert bracketed paste markers ("\e[200~" and "\e[201~") around pasted
content in paste_selection() when bracketed paste is active.
- Add TIOCL_GETBRACKETEDPASTE to return bracketed paste status so user
space daemons implementing cut-and-paste functionality (e.g. gpm,
BRLTTY) may know when to insert bracketed paste markers.
Link: https://en.wikipedia.org/wiki/Bracketed-paste
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250520171851.1219676-2-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Problem
========
commit 658eb5ab91 ("delayacct: add delay max to record delay peak")
- adding more fields
commit f65c64f311 ("delayacct: add delay min to record delay peak")
- adding more fields
commit b016d08737 ("taskstats: modify taskstats version")
- version bump to 15
Since version 15 (TASKSTATS_VERSION=15) the new layout of the structure
adds fields in the middle of the structure, rendering all old software
incompatible with newer kernels and software compiled against the new
kernel headers incompatible with older kernels.
Solution
=========
move delay max and delay min to the end of taskstat, and bump
the version to 16 after the change
[wang.yaxin@zte.com.cn: adjust indentation]
Link: https://lkml.kernel.org/r/202505192131489882NSciXV4EGd8zzjLuwoOK@zte.com.cn
Link: https://lkml.kernel.org/r/20250510155413259V4JNRXxukdDgzsaL0Fo6a@zte.com.cn
Fixes: f65c64f311 ("delayacct: add delay min to record delay peak")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a toggleable VM capability to reset the VCPU from userspace by
setting MP_STATE_INIT_RECEIVED through IOCTL.
Reset through a mp_state to avoid adding a new IOCTL.
Do not reset on a transition from STOPPED to RUNNABLE, because it's
better to avoid side effects that would complicate userspace adoption.
The MP_STATE_INIT_RECEIVED is not a permanent mp_state -- IOCTL resets
the VCPU while preserving the original mp_state -- because we wouldn't
gain much from having a new state it in the rest of KVM, but it's a very
non-standard use of the IOCTL.
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250515143723.2450630-5-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
For UBLK_F_AUTO_BUF_REG, buffer is registered to uring_cmd context
automatically with the provided buffer index. User may provide one wrong
buffer index, or the specified buffer is registered by application already.
Add UBLK_AUTO_BUF_REG_FALLBACK for supporting to auto buffer registering
fallback by completing the uring_cmd and telling ublk server the
register failure via UBLK_AUTO_BUF_REG_FALLBACK, then ublk server still
can register the buffer from userspace.
So we can provide reliable way for supporting auto buffer register.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add UBLK_F_AUTO_BUF_REG for supporting to register buffer automatically
to local io_uring context with provided buffer index.
Add UAPI structure `struct ublk_auto_buf_reg` for holding user parameter
to register request buffer automatically, one 'flags' field is defined, and
there is still 32bit available for future extension, such as, adding one
io_ring FD field for registering buffer to external io_uring.
`struct ublk_auto_buf_reg` is populated from ublk uring_cmd's sqe->addr,
and all existing ublk commands are data-less, so it is just fine to reuse
sqe->addr for this purpose.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we're (almost) feature complete, let's allow userspace to
request KVM_ARM_VCPU_EL2* by bumping KVM_VCPU_MAX_FEATURES up.
We also now advertise the features to userspace with new capabilities.
It's going to be great...
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250514103501.2225951-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The TCA_FLOWER_KEY_CFM enum has a UNSPEC and MAX with _OPT
in the name, but the real attributes don't. Add a MAX that
more reasonably matches the attrs.
The PAD in TCA_TAPRIO is the only attr which doesn't have
_ATTR in it, perhaps signifying that it's not a real attr?
If so interesting idea in abstract but it makes codegen painful.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250513221752.843102-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add bind-tx netlink call to attach dmabuf for TX; queue is not
required, only ifindex and dmabuf fd for attachment.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-4-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard
regions", v2.
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Currently, CRIU utilizes PAGEMAP_SCAN as a more efficient alternative to
parsing /proc/pid/pagemap. Without this change, guard regions are
incorrectly reported as swap-anon regions, leading CRIU to attempt dumping
them and subsequently failing.
The series includes updates to the documentation and selftests to reflect
the new functionality.
This patch (of 3):
Introduce the PAGE_IS_GUARD flag in the PAGEMAP_SCAN ioctl to expose
information about guard regions. This allows userspace tools, such as
CRIU, to detect and handle guard regions.
Link: https://lkml.kernel.org/r/20250324065328.107678-1-avagin@google.com
Link: https://lkml.kernel.org/r/20250324065328.107678-2-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PTRACE_SET_SYSCALL_INFO is a generic ptrace API that complements
PTRACE_GET_SYSCALL_INFO by letting the ptracer modify details of system
calls the tracee is blocked in.
This API allows ptracers to obtain and modify system call details in a
straightforward and architecture-agnostic way, providing a consistent way
of manipulating the system call number and arguments across architectures.
As in case of PTRACE_GET_SYSCALL_INFO, PTRACE_SET_SYSCALL_INFO also does
not aim to address numerous architecture-specific system call ABI
peculiarities, like differences in the number of system call arguments for
such system calls as pread64 and preadv.
The current implementation supports changing only those bits of system
call information that are used by strace system call tampering, namely,
syscall number, syscall arguments, and syscall return value.
Support of changing additional details returned by
PTRACE_GET_SYSCALL_INFO, such as instruction pointer and stack pointer,
could be added later if needed, by using struct ptrace_syscall_info.flags
to specify the additional details that should be set. Currently, "flags"
and "reserved" fields of struct ptrace_syscall_info must be initialized
with zeroes; "arch", "instruction_pointer", and "stack_pointer" fields are
currently ignored.
PTRACE_SET_SYSCALL_INFO currently supports only PTRACE_SYSCALL_INFO_ENTRY,
PTRACE_SYSCALL_INFO_EXIT, and PTRACE_SYSCALL_INFO_SECCOMP operations.
Other operations could be added later if needed.
Ideally, PTRACE_SET_SYSCALL_INFO should have been introduced along with
PTRACE_GET_SYSCALL_INFO, but it didn't happen. The last straw that
convinced me to implement PTRACE_SET_SYSCALL_INFO was apparent failure to
provide an API of changing the first system call argument on riscv
architecture.
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid, void *addr, void *data);
...
PTRACE_SET_SYSCALL_INFO
Modify information about the system call that caused the stop.
The "data" argument is a pointer to struct ptrace_syscall_info
that specifies the system call information to be set.
The "addr" argument should be set to sizeof(struct ptrace_syscall_info)).
Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/
Link: https://lkml.kernel.org/r/20250303112044.GF24170@strace.io
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: anton ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Zankel <chris@zankel.net>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Davide Berardi <berardi.dav@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Eugene Syromyatnikov <evgsyr@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Renzo Davoi <renzo@cs.unibo.it>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Symmetric RSS hash requires that:
* No other fields besides IP src/dst and/or L4 src/dst are set
* If src is set, dst must also be set
This restriction was only enforced when RXNFC was configured after
symmetric hash was enabled. In the opposite order of operations (RXNFC
then symmetric enablement) the check was not performed.
Perform the sanity check on set_rxfh as well, by iterating over all flow
types hash fields and making sure they are all symmetric.
Introduce a function that returns whether a flow type is hashable (not
spec only) and needs to be iterated over. To make sure that no one
forgets to update the list of hashable flow types when adding new flow
types, a static assert is added to draw the developer's attention.
The conversion of uapi #defines to enum is not ideal, but as Jakub
mentioned [1], we have precedent for that.
[1] https://lore.kernel.org/netdev/20250324073509.6571ade3@kernel.org/
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508103034.885536-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding support to retrieve ref_ctr_offset for uprobe perf link,
which got somehow omitted from the initial uprobe link info changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-2-jolsa@kernel.org
Add a header that describes the 3A statistics buffer and the
parameters buffer for C3 ISP
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
C3ISP_PARAMS is the C3 ISP Parameters format.
C3ISP_STATS is the C3 ISP Statistics format.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Keke Li <keke.li@amlogic.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
SST PP revision 2 added fabric 1 P0, P1 and Pm frequencies. Export them
by using a new IOCTL ISST_IF_GET_PERF_LEVEL_FABRIC_INFO. This IOCTL
requires platforms with SST PP revision 2 or higher.
To accommodate potential future increases in fabric count and avoid ABI
changes, support is extended for up to 8 fabrics.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250506163531.1061185-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XFS will be able to support large atomic writes (atomic write > 1x block)
in future. This will be achieved by using different operating methods,
depending on the size of the write.
Specifically a new method of operation based in FS atomic extent remapping
will be supported in addition to the current HW offload-based method.
The FS method will generally be appreciably slower performing than the
HW-offload method. However the FS method will be typically able to
contribute to achieving a larger atomic write unit max limit.
XFS will support a hybrid mode, where HW offload method will be used when
possible, i.e. HW offload is used when the length of the write is
supported, and for other times FS-based atomic writes will be used.
As such, there is an atomic write length at which the user may experience
appreciably slower performance.
Advertise this limit in a new statx field, stx_atomic_write_unit_max_opt.
When zero, it means that there is no such performance boundary.
Masks STATX{_ATTR}_WRITE_ATOMIC can be used to get this new field. This is
ok for older kernels which don't support this new field, as they would
report 0 in this field (from zeroing in cp_statx()) already. Furthermore
those older kernels don't support large atomic writes - apart from block
fops, but there would be consistent performance there for atomic writes
in range [unit min, unit max].
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
-----BEGIN PGP SIGNATURE-----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=s9mS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless features, notably
* stack
- free SKBTX_WIFI_STATUS flag
- fixes for VLAN multicast in multi-link
- improve codel parameters (revert some old twiddling)
* ath12k
- Enable AHB support for IPQ5332.
- Add monitor interface support to QCN9274.
- Add MLO support to WCN7850.
- Add 802.11d scan offload support to WCN7850.
* ath11k
- Restore hibernation support
* iwlwifi
- EMLSR on two 5 GHz links
* mwifiex
- cleanups/refactoring
along with many other small features/cleanups
* tag 'wireless-next-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (177 commits)
Revert "wifi: iwlwifi: clean up config macro"
wifi: iwlwifi: move phy_filters to fw_runtime
wifi: iwlwifi: pcie: make sure to lock rxq->read
wifi: iwlwifi: add definitions for iwl_mac_power_cmd version 2
wifi: iwlwifi: clean up config macro
wifi: iwlwifi: mld: simplify iwl_mld_rx_fill_status()
wifi: iwlwifi: mld: rx: simplify channel handling
wifi: iwlwifi: clean up band in RX metadata
wifi: iwlwifi: mld: skip unknown FW channel load values
wifi: iwlwifi: define API for external FSEQ images
wifi: iwlwifi: mld: allow EMLSR on separated 5 GHz subbands
wifi: iwlwifi: mld: use cfg80211_chandef_get_width()
wifi: iwlwifi: mld: fix iwl_mld_emlsr_disallowed_with_link() return
wifi: iwlwifi: mld: clarify variable type
wifi: iwlwifi: pcie: add support for the reset handshake in MSI
wifi: mac80211_hwsim: Prevent tsf from setting if beacon is disabled
wifi: mac80211: restructure tx profile retrieval for MLO MBSSID
wifi: nl80211: add link id of transmitted profile for MLO MBSSID
wifi: ieee80211: Add helpers to fetch EMLSR delay and timeout values
wifi: mac80211: update ML STA with EML capabilities
...
====================
Link: https://patch.msgid.link/20250506174656.119970-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Devlink param and health reporter fmsg use attributes with dynamic type
which is determined according to a different type. Currently used values
are NLA_*. The problem is, they are not part of UAPI. They may change
which would cause a break.
To make this future safe, introduce a enum that shadows NLA_* values in
it and is part of UAPI.
Also, this allows to possibly carry types that are unrelated to NLA_*
values.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow userspace to pass a per-I/O write stream in the SQE:
__u8 write_stream;
The __u8 type matches the size the filesystems and block layer support.
Application can query the supported values from the block devices
max_write_streams sysfs attribute. Unsupported values are ignored by
file operations that do not support write streams or rejected with an
error by those that support them.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250506121732.8211-7-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The block layer bounce buffering support is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Multipath cannot directly provide failover for ioctls in the kernel
because it doesn't know what each ioctl means and which result could
indicate a path error. Userspace generally knows what the ioctl it
issued means and if it might be a path error, but neither does it know
which path the ioctl took nor does it necessarily have the privileges to
fail a path using the control device.
In order to allow userspace to address this situation, implement a
DM_MPATH_PROBE_PATHS ioctl that prompts the dm-mpath driver to probe all
active paths in the current path group to see whether they still work,
and fail them if not. If this returns success, userspace can retry the
ioctl and expect that the previously hit bad path is now failed (or
working again).
The immediate motivation for this is the use of SG_IO in QEMU for SCSI
passthrough. Following a failed SG_IO ioctl, QEMU will trigger probing
to ensure that all active paths are actually alive, so that retrying
SG_IO at least has a lower chance of failing due to a path error.
However, the problem is broader than just SG_IO (it affects any ioctl),
and if applications need failover support for other ioctls, the same
probing can be used.
This is not implemented on the DM control device, but on the DM mpath
block devices, to allow all users who have access to such a block device
to make use of this interface, specifically to implement failover for
ioctls. For the same reason, it is also unprivileged. Its implementation
is effectively just a bunch of reads, which could already be issued by
userspace, just without any guarantee that all the rights paths are
selected.
The probing implemented here is done fully synchronously path by path;
probing all paths concurrently is left as an improvement for the future.
Co-developed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Extend the futex2 interface to be aware of mempolicy.
When FUTEX2_MPOL is specified and there is a MPOL_PREFERRED or
home_node specified covering the futex address, use that hash-map.
Notably, in this case the futex will go to the global node hashtable,
even if it is a PRIVATE futex.
When FUTEX2_NUMA|FUTEX2_MPOL is specified and the user specified node
value is FUTEX_NO_NODE, the MPOL lookup (as described above) will be
tried first before reverting to setting node to the local node.
[bigeasy: add CONFIG_FUTEX_MPOL, add MPOL to FUTEX2_VALID_MASK, write
the node only to user if FUTEX_NO_NODE was supplied]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-18-bigeasy@linutronix.de
Extend the futex2 interface to be numa aware.
When FUTEX2_NUMA is specified for a futex, the user value is extended
to two words (of the same size). The first is the user value we all
know, the second one will be the node to place this futex on.
struct futex_numa_32 {
u32 val;
u32 node;
};
When node is set to ~0, WAIT will set it to the current node_id such
that WAKE knows where to find it. If userspace corrupts the node value
between WAIT and WAKE, the futex will not be found and no wakeup will
happen.
When FUTEX2_NUMA is not set, the node is simply an extension of the
hash, such that traditional futexes are still interleaved over the
nodes.
This is done to avoid having to have a separate !numa hash-table.
[bigeasy: ensure to have at least hashsize of 4 in futex_init(), add
pr_info() for size and allocation information. Cast the naddr math to
void*]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-17-bigeasy@linutronix.de
My initial testing showed that:
perf bench futex hash
reported less operations/sec with private hash. After using the same
amount of buckets in the private hash as used by the global hash then
the operations/sec were about the same.
This changed once the private hash became resizable. This feature added
an RCU section and reference counting via atomic inc+dec operation into
the hot path.
The reference counting can be avoided if the private hash is made
immutable.
Extend PR_FUTEX_HASH_SET_SLOTS by a fourth argument which denotes if the
private should be made immutable. Once set (to true) the a further
resize is not allowed (same if set to global hash).
Add PR_FUTEX_HASH_GET_IMMUTABLE which returns true if the hash can not
be changed.
Update "perf bench" suite.
For comparison, results of "perf bench futex hash -s":
- Xeon CPU E5-2650, 2 NUMA nodes, total 32 CPUs:
- Before the introducing task local hash
shared Averaged 1.487.148 operations/sec (+- 0,53%), total secs = 10
private Averaged 2.192.405 operations/sec (+- 0,07%), total secs = 10
- With the series
shared Averaged 1.326.342 operations/sec (+- 0,41%), total secs = 10
-b128 Averaged 141.394 operations/sec (+- 1,15%), total secs = 10
-Ib128 Averaged 851.490 operations/sec (+- 0,67%), total secs = 10
-b8192 Averaged 131.321 operations/sec (+- 2,13%), total secs = 10
-Ib8192 Averaged 1.923.077 operations/sec (+- 0,61%), total secs = 10
128 is the default allocation of hash buckets.
8192 was the previous amount of allocated hash buckets.
- Xeon(R) CPU E7-8890 v3, 4 NUMA nodes, total 144 CPUs:
- Before the introducing task local hash
shared Averaged 1.810.936 operations/sec (+- 0,26%), total secs = 20
private Averaged 2.505.801 operations/sec (+- 0,05%), total secs = 20
- With the series
shared Averaged 1.589.002 operations/sec (+- 0,25%), total secs = 20
-b1024 Averaged 42.410 operations/sec (+- 0,20%), total secs = 20
-Ib1024 Averaged 740.638 operations/sec (+- 1,51%), total secs = 20
-b65536 Averaged 48.811 operations/sec (+- 1,35%), total secs = 20
-Ib65536 Averaged 1.963.165 operations/sec (+- 0,18%), total secs = 20
1024 is the default allocation of hash buckets.
65536 was the previous amount of allocated hash buckets.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250416162921.513656-16-bigeasy@linutronix.de
The futex hash is system wide and shared by all tasks. Each slot
is hashed based on futex address and the VMA of the thread. Due to
randomized VMAs (and memory allocations) the same logical lock (pointer)
can end up in a different hash bucket on each invocation of the
application. This in turn means that different applications may share a
hash bucket on the first invocation but not on the second and it is not
always clear which applications will be involved. This can result in
high latency's to acquire the futex_hash_bucket::lock especially if the
lock owner is limited to a CPU and can not be effectively PI boosted.
Introduce basic infrastructure for process local hash which is shared by
all threads of process. This hash will only be used for a
PROCESS_PRIVATE FUTEX operation.
The hashmap can be allocated via:
prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_SET_SLOTS, num);
A `num' of 0 means that the global hash is used instead of a private
hash.
Other values for `num' specify the number of slots for the hash and the
number must be power of two, starting with two.
The prctl() returns zero on success. This function can only be used
before a thread is created.
The current status for the private hash can be queried via:
num = prctl(PR_FUTEX_HASH, PR_FUTEX_HASH_GET_SLOTS);
which return the current number of slots. The value 0 means that the
global hash is used. Values greater than 0 indicate the number of slots
that are used. A negative number indicates an error.
For optimisation, for the private hash jhash2() uses only two arguments
the address and the offset. This omits the VMA which is always the same.
[peterz: Use 0 for global hash. A bit shuffling and renaming. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-13-bigeasy@linutronix.de
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6xNz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy May Day.
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too
buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list
corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump"
* tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: vertexcom: mse102x: Fix RX error handling
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: hns3: defer calling ptp_clock_register()
net: hns3: fixed debugfs tm_qset size
net: hns3: fix an interrupt residual problem
net: hns3: store rx VLAN tag offload state for VF
octeon_ep: Fix host hang issue during device reboot
net: fec: ERR007885 Workaround for conventional TX
net: lan743x: Fix memleak issue when GSO enabled
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
bnxt_en: fix module unload sequence
bnxt_en: Fix ethtool -d byte order for 32-bit values
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
...
The cec-funcs.h header sets the destination to 0xf for those
messages that can only be broadcast. Instead of writing:
msg->msg[0] |= 0xf; /* broadcast */
just write:
msg->msg[0] |= CEC_LOG_ADDR_BROADCAST;
which is more descriptive and allows us to drop the comment.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tp12
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
1) Replace msecs_to_jiffies() by secs_to_jiffies(), from Easwar Hariharan.
2) Allow to compile xt_cgroup with cgroupsv2 support only,
from Michal Koutny.
3) Prepare for sock_cgroup_classid() removal by wrapping it around
ifdef, also from Michal Koutny.
4) Remove redundant pointer fetch on conntrack template, from Xuanqiang Luo.
5) Re-format one block in the tproxy documentation for consistency,
from Chen Linxuan.
6) Expose set element count and type via netlink attributes,
from Florian Westphal.
* tag 'nf-next-25-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: export set count and backend name to userspace
docs: tproxy: fix formatting for nft code block
netfilter: conntrack: Remove redundant NFCT_ALIGN call
net: cgroup: Guard users of sock_cgroup_classid()
netfilter: xt_cgroup: Make it independent from net_cls
netfilter: xt_IDLETIMER: convert timeouts to secs_to_jiffies()
====================
Link: https://patch.msgid.link/20250428221254.3853-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The phy-upstream enum is already defined in the ethtool.h UAPI header
and used by the ethtool userspace tool. However, the ethtool spec does
not reference it, causing YNL to auto-generate a duplicate and redundant
enum.
Fix this by updating the spec to reference the existing UAPI enum
in ethtool.h.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250425171419.947352-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nf_tables picks a suitable set backend implementation (bitmap, hash,
rbtree..) based on the userspace requirements.
Figuring out the chosen backend requires information about the set flags
and the kernel version. Export this to userspace so nft can include this
information in '--debug=netlink' output.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into usb-next
We need the USB fixes in here as well, and this resolves the following
merge conflicts that were reported in linux-next:
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/host/xhci.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fold it into pidfd_prepare() and rename PIDFD_CLONE to PIDFD_STALE to
indicate that the passed pid might not have task linkage and no explicit
check for that should be performed.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-3-450a19461e75@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
tcp: fastopen: pass TFO child indication through getsockopt
Note that this uses up the last bit of a field in struct tcp_info
Signed-off-by: Jeremy Harris <jgh@exim.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250423124334.4916-3-jgh@exim.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaAp+shAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSAukA/1FkHkyqXaiMYy2s4tlwvpjWMBP11gEUzyYM
j1HIn3rOAQDUT1V2q+Ff5ZVk4hsCZ8pJMTmrASSL/CHw1yfQHtzQAw==
=5RX1
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fix some Landlock audit issues, add related tests, and updates
documentation"
* tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Update log documentation
landlock: Fix documentation for landlock_restrict_self(2)
landlock: Fix documentation for landlock_create_ruleset(2)
selftests/landlock: Add PID tests for audit records
selftests/landlock: Factor out audit fixture in audit_test
landlock: Log the TGID of the domain creator
landlock: Remove incorrect warning
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During non-transmitted (nontx) profile configuration, interface
index of the transmitted (tx) profile is used to retrieve the
wireless device (wdev) associated with it. With MLO, this 'wdev'
may be part of an MLD with more than one link, hence only
interface index is not sufficient anymore to retrieve the correct
tx profile. Add a new attribute to configure link id of tx profile.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-2-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A small number of fixes.
virtgpu is exempt from reset shutdown fow now -
a more complete fix is in the works
spec compliance fixes in:
virtio-pci cap commands
vhost_scsi_send_bad_target
virtio console resize
missing locking fix in vhost-scsi
virtio ring - a KCSAN false positive fix
VHOST_*_OWNER documentation fix
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmgIi3cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGU8H/1Fq8pH+irGvyH4E21O03qx0wiM+lcYVhNH5
2a3rjOwuJBiLvscZTJG/w07hIpx0O4WrbygdT0BTll4Uen2C+OpGn/Y1LfhW6wsr
3yyeBpTr5hKiY8sOD08rMTHTCM4mD8UdYr13RcNq+eUxNZ6bA+kiGaXpIk0AiRPR
5pdbx16cTZM7k+/9aXp68hRO7yHnyilGzAJG1hHmfx1L5Mt++RVKsf2KI+3YHWcI
0ZZj/NP3iZfNm57+QpKX6zYikH4IFIer1r9wotMaR74brpuq8w7HKZUqe3VfG11Y
TBgq6NfDZVq8G8bCGPv+C+DfDnpYMFVYqytCLn4/AyOhLNCRDs8=
=m8wk
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A small number of fixes:
- virtgpu is exempt from reset shutdown fow now - a more complete fix
is in the works
- spec compliance fixes in:
- virtio-pci cap commands
- vhost_scsi_send_bad_target
- virtio console resize
- missing locking fix in vhost-scsi
- virtio ring - a KCSAN false positive fix
- VHOST_*_OWNER documentation fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: Fix vhost_scsi_send_status()
vhost-scsi: Fix vhost_scsi_send_bad_target()
vhost-scsi: protect vq->log_used with vq->mutex
vhost_task: fix vhost_task_create() documentation
virtio_console: fix order of fields cols and rows
virtio_console: fix missing byte order handling for cols and rows
virtgpu: don't reset on shutdown
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
vhost: fix VHOST_*_OWNER documentation
virtio_pci: Use self group type for cap commands
Currently ublk only allows the size of the ublkb block device to be
set via UBLK_CMD_SET_PARAMS before UBLK_CMD_START_DEV is triggered.
This does not provide support for extendable user-space block devices
without having to stop and restart the underlying ublkb block device
causing IO interruption.
This patch adds a new ublk command UBLK_U_CMD_UPDATE_SIZE to allow the
ublk block device to be resized on-the-fly.
Feature flag UBLK_F_UPDATE_SIZE is also added to indicate support.
Signed-off-by: Omri Mann <omri@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/2a370ab1-d85b-409d-b762-f9f3f6bdf705@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This works just like pipe2(2), except it also supports fixed file
descriptors. Used in a similar fashion as for other fd instantiating
opcodes (like accept, socket, open, etc), where sqe->file_slot is set
appropriately if two direct descriptors are desired rather than a set
of normal file descriptors.
sqe->addr must be set to a pointer to an array of 2 integers, which
is where the fixed/normal file descriptors are copied to.
sqe->pipe_flags contains flags, same as what is allowed for pipe2(2).
Future expansion of per-op private flags can go in sqe->ioprio,
like we do for other opcodes that take both a "syscall" flag set and
an io_uring opcode specific flag set.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As per PCIe spec 6.0.1, add PCIe lane equalization register offset for
data rates 8.0 GT/s, 32.0 GT/s and 64.0 GT/s.
Also add a macro for defining data rate 64.0 GT/s physical layer capability
ID.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250328-preset_v6-v9-4-22cfa0490518@oss.qualcomm.com
fib_rule, ip6_tunnel, and a whole lot of if_* headers lack the customary
_UAPI in the header guard. Without it YNL build can't protect from in tree
and system headers both getting included. YNL doesn't need most of these
but it's annoying to have to fix them one by one.
Note that header installation strips this _UAPI prefix so this should
result in no change to the end user.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250416200840.1338195-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This specific structure is used in the ovpn kernel module
to wrap and carry around a standard kernel socket.
ovpn takes ownership of passed sockets and therefore an ovpn
specific objects is attached to them for status tracking
purposes.
Initially only UDP support is introduced. TCP will come in a later
patch.
Cc: willemdebruijn.kernel@gmail.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-6-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit introduces basic netlink support with family
registration/unregistration functionalities and stub pre/post-doit.
More importantly it introduces the YAML uAPI description along
with its auto-generated files:
- include/uapi/linux/ovpn.h
- drivers/net/ovpn/netlink-gen.c
- drivers/net/ovpn/netlink-gen.h
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-2-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix and improve documentation related to landlock_restrict_self(2)'s
flags. Update the LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF
documentation according to the current semantic.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250416154716.1799902-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Fix, deduplicate, and improve rendering of landlock_restrict_self(2)'s
flags documentation.
The flags are now rendered like the syscall's parameters and
description.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250416154716.1799902-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Move and fix the flags documentation, and improve formatting.
It makes more sense and it eases maintenance to document syscall flags
in landlock.h, where they are defined. This is already the case for
landlock_restrict_self(2)'s flags.
The flags are now rendered like the syscall's parameters and
description.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250416154716.1799902-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
IORING_OP_RECV_ZC requests take a zcrx object id via sqe::zcrx_ifq_idx,
which binds it to the corresponding if / queue. However, we don't return
that id back to the user. It's fine as currently there can be only one
zcrx and the user assumes that its id should be 0, but as we'll need
multiple zcrx objects in the future let's explicitly pass it back on
registration.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8714667d370651962f7d1a169032e5f02682a73e.1744722517.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently userspace is able to notify the kernel to invalidate the cache
for an inode. This means that, if all the inodes in a filesystem need to
be invalidated, then userspace needs to iterate through all of them and do
this kernel notification separately.
This patch adds the concept of 'epoch': each fuse connection will have the
current epoch initialized and every new dentry will have it's d_time set to
the current epoch value. A new operation will then allow userspace to
increment the epoch value. Every time a dentry is d_revalidate()'ed, it's
epoch is compared with the current connection epoch and invalidated if it's
value is different.
Signed-off-by: Luis Henriques <luis@igalia.com>
Tested-by: Laura Promberger <laura.promberger@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Allow the app to request that CHALLENGEs be passed to it through an
out-of-band queue that allows recvmsg() to pick it up so that the app can
add data to it with sendmsg().
This will allow the application (AFS or userspace) to interact with the
process if it wants to and put values into user-defined fields. This will
be used by AFS when talking to a fileserver to supply that fileserver with
a crypto key by which callback RPCs can be encrypted (ie. notifications
from the fileserver to the client).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add MDB_FLAGS_OFFLOAD_FAILED and MDB_PG_FLAGS_OFFLOAD_FAILED to indicate
that an attempt to offload the MDB entry to switchdev has failed.
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250411150323.1117797-2-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VHOST_OWNER_SET and VHOST_OWNER_RESET are used in the documentation
instead of VHOST_SET_OWNER and VHOST_RESET_OWNER respectively.
To avoid confusion, let's use the right names in the documentation.
No change to the API, only the documentation is involved.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250303085237.19990-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Section 2.12.1.2 of v1.4 of the VirtIO spec states:
The device and driver capabilities commands are currently defined for
self group type.
1. VIRTIO_ADMIN_CMD_CAP_ID_LIST_QUERY
2. VIRTIO_ADMIN_CMD_DEVICE_CAP_GET
3. VIRTIO_ADMIN_CMD_DRIVER_CAP_SET
Fixes: bfcad51860 ("virtio: Manage device and driver capabilities via the admin commands")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Message-Id: <20250304161442.90700-1-danielj@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rocm-smi will be able to show the events for KFD process
start/end, it is the implementation of this feature.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add an USB jack type, in order to support notifying of a valid USB audio
device. Since USB audio devices can have a slew of different
configurations that reach beyond the basic headset and headphone use cases,
classify these devices differently.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-8-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When TCP is in TIME_WAIT state, PAWS verification uses
LINUX_PAWSESTABREJECTED, which is ambiguous and cannot be distinguished
from other PAWS verification processes.
We added a new counter, like the existing PAWS_OLD_ACK one.
Also we update the doc with previously missing PAWS_OLD_ACK.
usage:
'''
nstat -az | grep PAWSTimewait
TcpExtPAWSTimewait 1 0.0
'''
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250409112614.16153-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the bpf_l4_csum_replace helper, the BPF_F_PSEUDO_HDR flag should only
be set if the modified header field is part of the pseudo-header.
If you modify for example the UDP ports and pass BPF_F_PSEUDO_HDR,
inet_proto_csum_replace4 will update skb->csum even though it shouldn't
(the port and the UDP checksum updates null each other).
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/5126ef84ba75425b689482cbc98bffe75e5d8ab0.1744102490.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for hardware-wrapped keys to fscrypt. Such keys are
protected from certain attacks, such as cold boot attacks. For more
information, see the "Hardware-wrapped keys" section of
Documentation/block/inline-encryption.rst.
To support hardware-wrapped keys in fscrypt, we allow the fscrypt master
keys to be hardware-wrapped. File contents encryption is done by
passing the wrapped key to the inline encryption hardware via
blk-crypto. Other fscrypt operations such as filenames encryption
continue to be done by the kernel, using the "software secret" which the
hardware derives. For more information, see the documentation which
this patch adds to Documentation/filesystems/fscrypt.rst.
Note that this feature doesn't require any filesystem-specific changes.
However it does depend on inline encryption support, and thus currently
it is only applicable to ext4 and f2fs.
The version of this feature introduced by this patch is mostly
equivalent to the version that has existed downstream in the Android
Common Kernels since 2020. However, a couple fixes are included.
First, the flags field in struct fscrypt_add_key_arg is now placed in
the proper location. Second, key identifiers for HW-wrapped keys are
now derived using a distinct HKDF context byte; this fixes a bug where a
raw key could have the same identifier as a HW-wrapped key. Note that
as a result of these fixes, the version of this feature introduced by
this patch is not UAPI or on-disk format compatible with the version in
the Android Common Kernels, though the divergence is limited to just
those specific fixes. This version should be used going forwards.
This patch has been heavily rewritten from the original version by
Gaurav Kashyap <quic_gaurkash@quicinc.com> and
Barani Muthukumaran <bmuthuku@codeaurora.org>.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250404225859.172344-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
10-bit buffers.
NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
NV12 and NV16, using 10-bit components with no padding between each
component. Instead, a group of 4 luminance/chrominance samples are
stored over 5 bytes in little endian order:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '15' and '20' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a
multiple of 8 for NV15 and 4 for NV20.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
V4L2_TYPE_IS_OUTPUT() returns true for V4L2_BUF_TYPE_VIDEO_OVERLAY
which definitely belongs to CAPTURE.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Explicitly compare a buffer type only with valid buffer types,
to avoid matching a buffer type outside of the valid buffer type set.
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The map_fd field of the bpf_attr union is used in the BPF_MAP_FREEZE
syscall. Explicitly mention this in the comments.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250331203618.1973691-2-a.s.protopopov@gmail.com
-----BEGIN PGP SIGNATURE-----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=kf65
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Set of fixes/updates for io_uring that should go into this release.
The ublk bits could've gone via either tree - usually I put them in
block, but they got a bit mixed this series with the zero-copy
supported that ended up dipping into both trees.
This contains:
- Fix for sendmsg zc, include in pinned pages accounting like we do
for the other zc types
- Series for ublk fixing request aborting, doing various little
cleanups, fixing some zc issues, and adding queue_rqs support
- Another ublk series doing some code cleanups
- Series cleaning up the io_uring send path, mostly in preparation
for registered buffers
- Series doing little MSG_RING cleanups
- Fix for the newly added zc rx, fixing len being 0 for the last
invocation of the callback
- Add vectored registered buffer support for ublk. With that, then
ublk also supports this feature in the kernel revision where it
could generically introduced for rw/net
- A bunch of selftest additions for ublk. This is the majority of the
diffstat
- Silence a KCSAN data race warning for io-wq
- Various little cleanups and fixes"
* tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux: (44 commits)
io_uring: always do atomic put from iowq
selftests: ublk: enable zero copy for stripe target
io_uring: support vectored kernel fixed buffer
block: add for_each_mp_bvec()
io_uring: add validate_fixed_range() for validate fixed buffer
selftests: ublk: kublk: fix an error log line
selftests: ublk: kublk: use ioctl-encoded opcodes
io_uring/zcrx: return early from io_zcrx_recv_skb if readlen is 0
io_uring/net: avoid import_ubuf for regvec send
io_uring/rsrc: check size when importing reg buffer
io_uring: cleanup {g,s]etsockopt sqe reading
io_uring: hide caches sqes from drivers
io_uring: make zcrx depend on CONFIG_IO_URING
io_uring: add req flag invariant build assertion
Documentation: ublk: remove dead footnote
selftests: ublk: specify io_cmd_buf pointer type
ublk: specify io_cmd_buf pointer type
io_uring: don't pass ctx to tw add remote helper
io_uring/msg: initialise msg request opcode
io_uring/msg: rename io_double_lock_ctx()
...
Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1.
Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2Zaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIgQCaAyMozdrZtTiOs1OcZEuTkoCtKrEAniqe0OiL
s7R6j2NoOIwo9d6hBsjh
=IH7I
-----END PGP SIGNATURE-----
Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZ+vB5QAKCRDh3BK/laaZ
PGA2AQCVsyLmZFinaNC10S+Bkmx+a7f9MLhX6u+ILbmio8nT1AD7BKCDFD9pucG0
pilz+OaCXjXt/og6doyugM4SW/Q3tA0=
=BhLT
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Allow connection to server to time out (Joanne Koong)
- If server doesn't support creating a hard link, return EPERM rather
than ENOSYS (Matt Johnston)
- Allow file names longer than 1024 chars (Bernd Schubert)
- Fix a possible race if request on io_uring queue is interrupted
(Bernd Schubert)
- Misc fixes and cleanups
* tag 'fuse-update-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove unneeded atomic set in uring creation
fuse: fix uring race condition for null dereference of fc
fuse: Increase FUSE_NAME_MAX to PATH_MAX
fuse: Allocate only namelen buf memory in fuse_notify_
fuse: add default_request_timeout and max_request_timeout sysctls
fuse: add kernel-enforced timeout option for requests
fuse: optmize missing FUSE_LINK support
fuse: Return EPERM rather than ENOSYS from link()
fuse: removed unused function fuse_uring_create() from header
fuse: {io-uring} Fix a possible req cancellation race
Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are clearly
linked to a device. This is linked to the VIOMMU object and is intended to
be used by a VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered through
a simple FD returning event records on read().
- PASID support in VFIO. "Process Address Space ID" is a PCI feature that
allows the device to tag all PCI DMA operations with an ID. The IOMMU
will then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the hypervisor to
manage each PASID entry. The support is generic so any VFIO user could
attach any translation to a PASID, and the support should work on ARM
SMMUv3 as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate what
owns the various opaque owner fields
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+q6NgAKCRCFwuHvBreF
YZ3zAQDbl4/Z0O+CLN2AXq4Zeiyq1HTSoF94hzqmm7lQ17zTIwD8CCdyLXHvupaq
tkBIv5IovpaxlrSk6M0kh2K8vPCk9Qk=
=CIM3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are
clearly linked to a device.
This is linked to the VIOMMU object and is intended to be used by a
VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered
through a simple FD returning event records on read().
- PASID support in VFIO.
The "Process Address Space ID" is a PCI feature that allows the
device to tag all PCI DMA operations with an ID. The IOMMU will
then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the
hypervisor to manage each PASID entry.
The support is generic so any VFIO user could attach any
translation to a PASID, and the support should work on ARM SMMUv3
as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate
what owns the various opaque owner fields"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (49 commits)
iommufd: Test attach before detaching pasid
iommufd: Fix iommu_vevent_header tables markup
iommu: Convert unreachable() to BUG()
iommufd: Balance veventq->num_events inc/dec
iommufd: Initialize the flags of vevent in iommufd_viommu_report_event()
iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO
iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability
vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid
vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices
ida: Add ida_find_first_range()
iommufd/selftest: Add coverage for iommufd pasid attach/detach
iommufd/selftest: Add test ops to test pasid attach/detach
iommufd/selftest: Add a helper to get test device
iommufd/selftest: Add set_dev_pasid in mock iommu
iommufd: Allow allocating PASID-compatible domain
iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support
iommufd: Enforce PASID-compatible domain for RID
iommufd: Support pasid attach/replace
iommufd: Enforce PASID-compatible domain in PASID path
iommufd/device: Add pasid_attach array to track per-PASID attach
...
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Neil Brown contributed more scalability improvements to NFSD's
open file cache, and Jeff Layton contributed a menagerie of
repairs to NFSD's NFSv4 callback / backchannel implementation.
Mike Snitzer contributed a change to NFS re-export support that
disables support for file locking on a re-exported NFSv4 mount.
This is because NFSv4 state recovery is currently difficult if
not impossible for re-exported NFS mounts. The change aims to
prevent data integrity exposures after the re-export server
crashes.
Work continues on the evolving NFSD netlink administrative API.
Many thanks to the contributors, reviewers, testers, and bug
reporters who participated during the v6.15 development cycle.
-----BEGIN PGP SIGNATURE-----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=e2E2
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Neil Brown contributed more scalability improvements to NFSD's open
file cache, and Jeff Layton contributed a menagerie of repairs to
NFSD's NFSv4 callback / backchannel implementation.
Mike Snitzer contributed a change to NFS re-export support that
disables support for file locking on a re-exported NFSv4 mount. This
is because NFSv4 state recovery is currently difficult if not
impossible for re-exported NFS mounts. The change aims to prevent data
integrity exposures after the re-export server crashes.
Work continues on the evolving NFSD netlink administrative API.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.15 development cycle"
* tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add a Kconfig setting to enable delegated timestamps
sysctl: Fixes nsm_local_state bounds
nfsd: use a long for the count in nfsd4_state_shrinker_count()
nfsd: remove obsolete comment from nfs4_alloc_stid
nfsd: remove unneeded forward declaration of nfsd4_mark_cb_fault()
nfsd: reorganize struct nfs4_delegation for better packing
nfsd: handle errors from rpc_call_async()
nfsd: move cb_need_restart flag into cb_flags
nfsd: replace CB_GETATTR_BUSY with NFSD4_CALLBACK_RUNNING
nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY
nfsd: prevent callback tasks running concurrently
nfsd: disallow file locking and delegations for NFSv4 reexport
nfsd: filecache: drop the list_lru lock during lock gc scans
nfsd: filecache: don't repeatedly add/remove files on the lru list
nfsd: filecache: introduce NFSD_FILE_RECENT
nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc()
nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync()
NFSD: Re-organize nfsd_file_gc_worker()
nfsd: filecache: remove race handling.
fs: nfs: acl: Avoid -Wflex-array-member-not-at-end warning
...
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.
This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.
Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.
[SzM: Bump the API version number]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----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=aN/V
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for
debug builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with additional
conditions, add a new ALT_TYPE_FEATURE alternative to provide a static
branch via alternative patching. Also, move machine feature detection
to the decompressor for early patching and add debugging functionality
to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to mismatched
semantics and lack of known users, relying on asm-generic fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfmuPwACgkQjYWKoQLX
FBgTDAgAjKmZ5OYjACRfYepTvKk9SDqa2CBlQZ+BhbAXEVIrxKnv8OkImAXoWNsM
mFxiCxAHWdcD+nqTrxFsXhkNLsndijlwnj/IqZgvy6R/3yNtBlAYRPLujOmVrsQB
dWB8Dl38p63Ip1JfAqyabiAOUjfhrclRcM5FX5tgciXA6N/vhY3OM6k0+k7wN4Nj
Dei/rCrnYRXTrFQgtM4w8JTIrwdnXjeKvaTYCflh4Q5ISJ7TceSF7cqq8HOs5hhK
o2ciaoTdx212522CIsxeN3Ls3jrn8bCOCoOeSCysc5RL84grAuFnmjSajo1LFide
S/TQtHXYy78Wuei9xvHi561ogiv/ww==
=Kxgc
-----END PGP SIGNATURE-----
Merge tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
-----BEGIN PGP SIGNATURE-----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=gM1i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
IO split is usually bad in io_uring world, since -EAGAIN is caused and
IO handling may have to fallback to io-wq, this way does hurt performance.
ublk starts to support zero copy recently, for avoiding unnecessary IO
split, ublk driver's segment limit should be aligned with backend
device's segment limit.
Another reason is that io_buffer_register_bvec() needs to allocate bvecs,
which number is aligned with ublk request segment number, so that big
memory allocation can be avoided by setting reasonable max_segments limit.
So add segment parameter for providing ublk server chance to align
segment limit with backend, and keep it reasonable from implementation
viewpoint.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=vOm1
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-reg-vec-20250327' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Final separate updates for io_uring.
This started out as a series of cleanups improvements and improvements
for registered buffers, but as the last series of the io_uring changes
for 6.15, it also collected a few fixes for the other branches on top:
- Add support for vectored fixed/registered buffers.
Previously only single segments have been supported for commands,
now vectored variants are supported as well. This series includes
networking and file read/write support.
- Small series unifying return codes across multi and single shot.
- Small series cleaning up registerd buffer importing.
- Adding support for vectored registered buffers for uring_cmd.
- Fix for io-wq handling of command reissue.
- Various little fixes and tweaks"
* tag 'for-6.15/io_uring-reg-vec-20250327' of git://git.kernel.dk/linux: (25 commits)
io_uring/net: fix io_req_post_cqe abuse by send bundle
io_uring/net: use REQ_F_IMPORT_BUFFER for send_zc
io_uring: move min_events sanitisation
io_uring: rename "min" arg in io_iopoll_check()
io_uring: open code __io_post_aux_cqe()
io_uring: defer iowq cqe overflow via task_work
io_uring: fix retry handling off iowq
io_uring/net: only import send_zc buffer once
io_uring/cmd: introduce io_uring_cmd_import_fixed_vec
io_uring/cmd: add iovec cache for commands
io_uring/cmd: don't expose entire cmd async data
io_uring: rename the data cmd cache
io_uring: rely on io_prep_reg_vec for iovec placement
io_uring: introduce io_prep_reg_iovec()
io_uring: unify STOP_MULTISHOT with IOU_OK
io_uring: return -EAGAIN to continue multishot
io_uring: cap cached iovec/bvec size
io_uring/net: implement vectored reg bufs for zctx
io_uring/net: convert to struct iou_vec
io_uring/net: pull vec alloc out of msghdr import
...
-----BEGIN PGP SIGNATURE-----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=AZkA
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-epoll-wait-20250325' of git://git.kernel.dk/linux
Pull io_uring epoll support from Jens Axboe:
"This adds support for reading epoll events via io_uring.
While this may seem counter-intuitive (and/or productive), the
reasoning here is that quite a few existing epoll event loops can
easily do a partial conversion to a completion based model, but are
still stuck with one (or few) event types that remain readiness based.
For that case, they then need to add the io_uring fd to the epoll
context, and continue to rely on epoll_wait(2) for waiting on events.
This misses out on the finer grained waiting that io_uring can do, to
reduce context switches and wait for multiple events in one batch
reliably.
With adding support for reaping epoll events via io_uring, the whole
legacy readiness based event types can still be reaped via epoll, with
the overall waiting in the loop be driven by io_uring"
* tag 'for-6.15/io_uring-epoll-wait-20250325' of git://git.kernel.dk/linux:
io_uring/epoll: add support for IORING_OP_EPOLL_WAIT
io_uring/epoll: remove CONFIG_EPOLL guards
-----BEGIN PGP SIGNATURE-----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=MOve
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux
Pull io_uring zero-copy receive support from Jens Axboe:
"This adds support for zero-copy receive with io_uring, enabling fast
bulk receive of data directly into application memory, rather than
needing to copy the data out of kernel memory.
While this version only supports host memory as that was the initial
target, other memory types are planned as well, with notably GPU
memory coming next.
This work depends on some networking components which were queued up
on the networking side, but have now landed in your tree.
This is the work of Pavel Begunkov and David Wei. From the v14 posting:
'We configure a page pool that a driver uses to fill a hw rx queue
to hand out user pages instead of kernel pages. Any data that ends
up hitting this hw rx queue will thus be dma'd into userspace
memory directly, without needing to be bounced through kernel
memory. 'Reading' data out of a socket instead becomes a
_notification_ mechanism, where the kernel tells userspace where
the data is. The overall approach is similar to the devmem TCP
proposal
This relies on hw header/data split, flow steering and RSS to
ensure packet headers remain in kernel memory and only desired
flows hit a hw rx queue configured for zero copy. Configuring this
is outside of the scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is
that io_uring is used for the uAPI and the lifetime of all objects
are bound to an io_uring instance. Data is 'read' using a new
io_uring request type. When done, data is returned via a new shared
refill queue. A zero copy page pool refills a hw rx queue from this
refill queue directly. Of course, the lifetime of these data
buffers are managed by io_uring rather than the networking stack,
with different refcounting rules.
This patchset is the first step adding basic zero copy support. We
will extend this iteratively with new features e.g. dynamically
allocated zero copy areas, THP support, dmabuf support, improved
copy fallback, general optimisations and more'
In a local setup, I was able to saturate a 200G link with a single CPU
core, and at netdev conf 0x19 earlier this month, Jamal reported
188Gbit of bandwidth using a single core (no HT, including soft-irq).
Safe to say the efficiency is there, as bigger links would be needed
to find the per-core limit, and it's considerably more efficient and
faster than the existing devmem solution"
* tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux:
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZ+bGgBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSKmgBAICZsmQTuKMHIXdB7kwA+BX5k++SZcyA+qHN
0hrJTSMsAP0Uv6NpiPT4CTduqBMRbuMwNhujBczRiok6yaHDbC8eCw==
=K8XL
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings two main changes to Landlock:
- A signal scoping fix with a new interface for user space to know if
it is compatible with the running kernel.
- Audit support to give visibility on why access requests are denied,
including the origin of the security policy, missing access rights,
and description of object(s). This was designed to limit log spam
as much as possible while still alerting about unexpected blocked
access.
With these changes come new and improved documentation, and a lot of
new tests"
* tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (36 commits)
landlock: Add audit documentation
selftests/landlock: Add audit tests for network
selftests/landlock: Add audit tests for filesystem
selftests/landlock: Add audit tests for abstract UNIX socket scoping
selftests/landlock: Add audit tests for ptrace
selftests/landlock: Test audit with restrict flags
selftests/landlock: Add tests for audit flags and domain IDs
selftests/landlock: Extend tests for landlock_restrict_self(2)'s flags
selftests/landlock: Add test for invalid ruleset file descriptor
samples/landlock: Enable users to log sandbox denials
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_*_EXEC_* flags
landlock: Log scoped denials
landlock: Log TCP bind and connect denials
landlock: Log truncate and IOCTL denials
landlock: Factor out IOCTL hooks
landlock: Log file-related denials
landlock: Log mount-related denials
landlock: Add AUDIT_LANDLOCK_DOMAIN and log domain status
landlock: Add AUDIT_LANDLOCK_ACCESS and log ptrace denials
...
Stephen Rothwell reports htmldocs warnings on iommufd_vevent_header
tables:
Documentation/userspace-api/iommufd:323: ./include/uapi/linux/iommufd.h:1048: CRITICAL: Unexpected section title or transition.
------------------------------------------------------------------------- [docutils]
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -sphinx-version 8.1.3 ./include/uapi/linux/iommufd.h' processing failed with: Documentation/userspace-api/iommufd:323: ./include/uapi/linux/iommufd.h:1048: (SEVERE/4) Unexpected section title or transition.
-------------------------------------------------------------------------
These are because Sphinx confuses the tables for section headings. Fix
the table markup to squash away above warnings.
Fixes: e36ba5ab80 ("iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC")
Link: https://patch.msgid.link/r/20250328114654.55840-1-bagasdotme@gmail.com
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250318213359.5dc56fd1@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
PASID usage requires PASID support in both device and IOMMU. Since the
iommu drivers always enable the PASID capability for the device if it
is supported, this extends the IOMMU_GET_HW_INFO to report the PASID
capability to userspace. Also, enhances the selftest accordingly.
Link: https://patch.msgid.link/r/20250321180143.8468-5-yi.l.liu@intel.com
Cc: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org> #aarch64 platform
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the context-type additions to the virtio-gpu spec, these have been
defined locally in guest user-space, and virtio-gpu backend library code.
Now, these capsets have been stabilized, and should be defined in a
common space, in both the virtio_gpu header, and alongside the virtgpu_drm
interface that they apply to.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Aaron Ruby <aruby@qnx.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: edit commit title]
Link: https://patchwork.freedesktop.org/patch/msgid/YT3PR01MB5857E808EDF6949F2DF517FDAFA12@YT3PR01MB5857.CANPRD01.PROD.OUTLOOK.COM
In this round, there are three major updates: 1) folio conversion, 2) refactor
for mount API conversion, 3) some performance improvement such as direct IO,
checkpoint speed, and IO priority hints. For stability, there are patches
which add more sanity checks and fixes some major issues like i_size in
atomic write operations and write pointer recovery in zoned devices.
Enhancement:
- huge folio converion work by Matthew Wilcox
- clean up for mount API conversion by Eric Sandeen
- improve direct IO speed in the overwrite case
- add some sanity check on node consistency
- set highest IO priority for checkpoint thread
- keep POSIX_FADV_NOREUSE ranges and add sysfs entry to reclaim pages
- add ioctl to get IO priority hint
- add carve_out sysfs node for fsstat
Bug fix:
- disable nat_bits during umount to avoid potential nat entry corruption
- fix missing i_size update on atomic writes
- fix missing discard for active segments
- fix running out of free segments
- fix out-of-bounds access in f2fs_truncate_inode_blocks()
- call f2fs_recover_quota_end() correctly
- fix potential deadloop in prepare_compress_overwrite()
- fix the missing write pointer correction for zoned device
- fix to avoid panic once fallocation fails for pinfile
- don't retry IO for corrupted data scenario
There are many other clean up patches and minor bug fixes as usual.
-----BEGIN PGP SIGNATURE-----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=E+TE
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, there are three major updates: (1) folio conversion,
(2) refactoring for mount API conversion, (3) some performance
improvement such as direct IO, checkpoint speed, and IO priority
hints.
For stability, there are patches which add more sanity checks and
fixes some major issues like i_size in atomic write operations and
write pointer recovery in zoned devices.
Enhancements:
- huge folio converion work by Matthew Wilcox
- clean up for mount API conversion by Eric Sandeen
- improve direct IO speed in the overwrite case
- add some sanity check on node consistency
- set highest IO priority for checkpoint thread
- keep POSIX_FADV_NOREUSE ranges and add sysfs entry to reclaim pages
- add ioctl to get IO priority hint
- add carve_out sysfs node for fsstat
Bug fixes:
- disable nat_bits during umount to avoid potential nat entry corruption
- fix missing i_size update on atomic writes
- fix missing discard for active segments
- fix running out of free segments
- fix out-of-bounds access in f2fs_truncate_inode_blocks()
- call f2fs_recover_quota_end() correctly
- fix potential deadloop in prepare_compress_overwrite()
- fix the missing write pointer correction for zoned device
- fix to avoid panic once fallocation fails for pinfile
- don't retry IO for corrupted data scenario
There are many other clean up patches and minor bug fixes as usual"
* tag 'f2fs-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
f2fs: fix missing discard for active segments
f2fs: optimize f2fs DIO overwrites
f2fs: fix to avoid atomicity corruption of atomic file
f2fs: pass sbi rather than sb to parse_options()
f2fs: pass sbi rather than sb to quota qf_name helpers
f2fs: defer readonly check vs norecovery
f2fs: Pass sbi rather than sb to f2fs_set_test_dummy_encryption
f2fs: make LAZYTIME a mount option flag
f2fs: make INLINECRYPT a mount option flag
f2fs: factor out an f2fs_default_check function
f2fs: consolidate unsupported option handling errors
f2fs: use f2fs_sb_has_device_alias during option parsing
f2fs: add carve_out sysfs node
f2fs: fix to avoid running out of free segments
f2fs: Remove f2fs_write_node_page()
f2fs: Remove f2fs_write_meta_page()
f2fs: Remove f2fs_write_data_page()
f2fs: Remove check for ->writepage
Revert "f2fs: rebuild nat_bits during umount"
f2fs: fix to avoid accessing uninitialized curseg
...
-----BEGIN PGP SIGNATURE-----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=t4Jn
-----END PGP SIGNATURE-----
Merge tag 'for-6.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes:
- fall back to buffered write if direct io is done on a file that
requires checksums
- this avoids a problem with checksum mismatch errors, observed
e.g. on virtual images when writes to pages under writeback
cause the checksum mismatch reports
- this may lead to some performance degradation but currently the
recommended setup for VM images is to use the NOCOW file
attribute that also disables checksums
- fast/realtime zstd levels -15 to -1
- supported by mount options (compress=zstd:-5) and defrag ioctl
- improved speed, reduced compression ratio, check the commit for
sample measurements
- defrag ioctl extended to accept negative compression levels
- subpage mode
- remove warning when subpage mode is used, the feature is now
reasonably complete and tested
- in debug mode allow to create 2K b-tree nodes to allow testing
subpage on x86_64 with 4K pages too
Performance improvements:
- in send, better file path caching improves runtime (on sample load
by -30%)
- on s390x with hardware zlib support prepare the input buffer in a
better way to get the best results from the acceleration
- minor speed improvement in encoded read, avoid memory allocation in
synchronous mode
Core:
- enable stable writes on inodes, replacing manually waiting for
writeback and allowing to skip that on inodes without checksums
- add last checks and warnings for out-of-band dirty writes to pages,
requiring a fixup ("fixup worker"), this should not be necessary
since 5.8 where get_user_page() and pin_user_pages*() prevent this
- long history behind that, we'll be happy to remove the whole
infrastructure in the near future
- more folio API conversions and preparations for large folio support
- subpage cleanups and refactoring, split handling of data and
metadata to allow future support for large folios
- readpage works as block-by-block, no change for normal mode, this
is preparation for future subpage updates
- block group refcount fixes and hardening
- delayed iput fixes
- in zoned mode, fix zone activation on filesystem with missing
devices
Cleanups:
- inode parameter cleanups
- path auto-freeing updates
- code flow simplifications in send
- redundant parameter cleanups"
* tag 'for-6.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
btrfs: zoned: fix zone finishing with missing devices
btrfs: zoned: fix zone activation with missing devices
btrfs: remove end_no_trans label from btrfs_log_inode_parent()
btrfs: simplify condition for logging new dentries at btrfs_log_inode_parent()
btrfs: remove redundant else statement from btrfs_log_inode_parent()
btrfs: use memcmp_extent_buffer() at replay_one_extent()
btrfs: update outdated comment for overwrite_item()
btrfs: use variables to store extent buffer and slot at overwrite_item()
btrfs: avoid unnecessary memory allocation and copy at overwrite_item()
btrfs: don't clobber ret in btrfs_validate_super()
btrfs: prepare btrfs_page_mkwrite() for large folios
btrfs: prepare extent_io.c for future large folio support
btrfs: prepare btrfs_launcher_folio() for large folios support
btrfs: replace PAGE_SIZE with folio_size for subpage.[ch]
btrfs: add a size parameter to btrfs_alloc_subpage()
btrfs: subpage: make btrfs_is_subpage() check against a folio
btrfs: add extra warning if delayed iput is added when it's not allowed
btrfs: avoid redundant path slot assignment in btrfs_search_forward()
btrfs: remove unnecessary btrfs_key local variable in btrfs_search_forward()
btrfs: simplify the return value handling in search_ioctl()
...
- Fix endpoint BAR testing so the test can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Verify that pci_endpoint interrupt tests set the correct IRQ type
(Kunihiko Hayashi)
- Fix interpretation of pci_endpoint_test_bars_read_bar() error returns
(Niklas Cassel)
- Fix potential string truncation in pci_endpoint_test_probe() (Niklas
Cassel)
- Increase endpoint test BAR size variable to accommodate BARs larger than
INT_MAX (Niklas Cassel)
- Release IRQs to avoid leak in pci_endpoint interrupt tests (Kunihiko
Hayashi)
- Log the correct IRQ type when pci_endpoint IRQ request test fails
(Kunihiko Hayashi)
- Remove pci_endpoint_test irq_type and no_msi globals; instead use
test->irq_type (Kunihiko Hayashi)
- Remove unnecessary use of managed IRQ functions in pci_endpoint_test
(Kunihiko Hayashi)
- Add and use IRQ_TYPE_* defines in pci_endpoint_test (Niklas Cassel)
- Add struct pci_epc_features.intx_capable and note that RK3568 and RK3588
can't raise INTx interrupts (Niklas Cassel)
- Expose supported IRQ types in CAPS so pci_endpoint_test can set
appropriate type (Niklas Cassel)
- Add PCITEST_IRQ_TYPE_AUTO to pci_endpoint_test for cases where the IRQ
type doesn't matter (Niklas Cassel)
* pci/endpoint-test:
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
selftests: pci_endpoint: Use IRQ_TYPE_* defines from UAPI header
misc: pci_endpoint_test: Use IRQ_TYPE_* defines from UAPI header
PCI: endpoint: pcitest: Add IRQ_TYPE_* defines to UAPI header
misc: pci_endpoint_test: Do not use managed IRQ functions
misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'
misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type
misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error
misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error
misc: pci_endpoint_test: Handle BAR sizes larger than INT_MAX
misc: pci_endpoint_test: Give disabled BARs a distinct error code
misc: pci_endpoint_test: Fix potential truncation in pci_endpoint_test_probe()
misc: pci_endpoint_test: Fix pci_endpoint_test_bars_read_bar() error handling
selftests: pci_endpoint: Add GET_IRQTYPE checks to each interrupt test
selftests: pci_endpoint: Skip disabled BARs
- Use pci_resource_n() to simplify BAR/window resource lookup (Ilpo
Järvinen)
- Fix typo that repeatedly distributed resources to a bridge instead of
iterating over subordinate bridges, which resulted in too little space to
assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV BARs,
to avoid failures when removing and re-adding devices (Ilpo Järvinen)
- Fix a double counting error for I/O resources, as we previously did for
memory resources (Ilpo Järvinen)
- Use resource_set_{range,size}() helpers in more places (Ilpo Järvinen)
- Add pci_resource_is_iov() to identify IOV resources (Ilpo Järvinen)
- Add pci_resource_num() to look up the BAR number from the resource
pointer (Ilpo Järvinen)
- Add restore_dev_resource() to simplify code that resources saved device
resources (Ilpo Järvinen)
- Allow drivers to enable devices even if we haven't assigned optional IOV
resources to them (Ilpo Järvinen)
- Improve debug output during resource reallocation (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce failures
if we can't allocate them (Ilpo Järvinen)
- Move declarations of pci_rescan_bus_bridge_resize(),
pci_reassign_bridge_resources(), and CardBus-related sizes from
include/linux/pci.h to drivers/pci/pci.h since they're not used outside
the PCI core (Ilpo Järvinen)
- Make pci_setup_bridge() static (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults in some
cases, which broke vfio-pci lazy mapping on first access (Niklas
Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was
disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices (Niklas
Schnelle)
* pci/resource:
s390/pci: Support mmap() of PCI resources except for ISM devices
s390/pci: Introduce pdev->non_mappable_bars and replace VFIO_PCI_MMAP
s390/pci: Fix s390_mmio_read/write syscall page fault handling
PCI: Fix NULL dereference in SR-IOV VF creation error path
PCI: Move cardbus IO size declarations into pci/pci.h
PCI: Make pci_setup_bridge() static
PCI: Move resource reassignment func declarations into pci/pci.h
PCI: Move pci_rescan_bus_bridge_resize() declaration to pci/pci.h
PCI: Fix BAR resizing when VF BARs are assigned
PCI: Do not claim to release resource falsely
PCI: Increase Resizable BAR support from 512 GB to 128 TB
PCI: Rework optional resource handling
PCI: Perform reset_resource() and build fail list in sync
PCI: Use res->parent to check if resource is assigned
PCI: Add debug print when releasing resources before retry
PCI: Indicate optional resource assignment failures
PCI: Always have realloc_head in __assign_resources_sorted()
PCI: Extend enable to check for any optional resource
PCI: Add restore_dev_resource()
PCI: Remove incorrect comment from pci_reassign_resource()
PCI: Consolidate assignment loop next round preparation
PCI: Rename retval to ret
PCI: Use while loop and break instead of gotos
PCI: Refactor pdev_sort_resources() & __dev_sort_resources()
PCI: Converge return paths in __assign_resources_sorted()
PCI: Add dev & res local variables to resource assignment funcs
PCI: Add pci_resource_num() helper
PCI: Check resource_size() separately
PCI: Add pci_resource_is_iov() to identify IOV resources
PCI: Use resource_set_{range,size}() helpers
PCI: Use SZ_* instead of literals in setup-bus.c
PCI: Fix old_size lower bound in calculate_iosize() too
PCI: Allow relaxed bridge window tail sizing for optional resources
PCI: Simplify size1 assignment logic
PCI: Use min_align, not unrelated add_align, for size0
PCI: Remove add_align overwrite unrelated to size0
PCI: Use downstream bridges for distributing resources
PCI: Cleanup dev->resource + resno to use pci_resource_n()
- Rename DOE 'protocol' to 'feature' to follow spec terminology (Alistair
Francis)
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
* pci/doe:
PCI/DOE: Allow enabling DOE without CXL
PCI/DOE: Expose DOE features via sysfs
PCI/DOE: Rename Discovery Response Data Object Contents to type
PCI/DOE: Rename DOE protocol to feature
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
-----BEGIN PGP SIGNATURE-----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=VEQr
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
Add LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF for the case of sandboxer
tools, init systems, or runtime containers launching programs sandboxing
themselves in an inconsistent way. Setting this flag should only
depends on runtime configuration (i.e. not hardcoded).
We don't create a new ruleset's option because this should not be part
of the security policy: only the task that enforces the policy (not the
one that create it) knows if itself or its children may request denied
actions.
This is the first and only flag that can be set without actually
restricting the caller (i.e. without providing a ruleset).
Extend struct landlock_cred_security with a u8 log_subdomains_off.
struct landlock_file_security is still 16 bytes.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Closes: https://github.com/landlock-lsm/linux/issues/3
Link: https://lore.kernel.org/r/20250320190717.2287696-19-mic@digikod.net
[mic: Fix comment]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Most of the time we want to log denied access because they should not
happen and such information helps diagnose issues. However, when
sandboxing processes that we know will try to access denied resources
(e.g. unknown, bogus, or malicious binary), we might want to not log
related access requests that might fill up logs.
By default, denied requests are logged until the task call execve(2).
If the LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF flag is set, denied
requests will not be logged for the same executed file.
If the LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON flag is set, denied
requests from after an execve(2) call will be logged.
The rationale is that a program should know its own behavior, but not
necessarily the behavior of other programs.
Because LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF is set for a specific
Landlock domain, it makes it possible to selectively mask some access
requests that would be logged by a parent domain, which might be handy
for unprivileged processes to limit logs. However, system
administrators should still use the audit filtering mechanism. There is
intentionally no audit nor sysctl configuration to re-enable these logs.
This is delegated to the user space program.
Increment the Landlock ABI version to reflect this interface change.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-18-mic@digikod.net
[mic: Rename variables and fix __maybe_unused]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Asynchronously log domain information when it first denies an access.
This minimize the amount of generated logs, which makes it possible to
always log denials for the current execution since they should not
happen. These records are identified with the new AUDIT_LANDLOCK_DOMAIN
type.
The AUDIT_LANDLOCK_DOMAIN message contains:
- the "domain" ID which is described;
- the "status" which can either be "allocated" or "deallocated";
- the "mode" which is for now only "enforcing";
- for the "allocated" status, a minimal set of properties to easily
identify the task that loaded the domain's policy with
landlock_restrict_self(2): "pid", "uid", executable path ("exe"), and
command line ("comm");
- for the "deallocated" state, the number of "denials" accounted to this
domain, which is at least 1.
This requires each domain to save these task properties at creation
time in the new struct landlock_details. A reference to the PID is kept
for the lifetime of the domain to avoid race conditions when
investigating the related task. The executable path is resolved and
stored to not keep a reference to the filesystem and block related
actions. All these metadata are stored for the lifetime of the related
domain and should then be minimal. The required memory is not accounted
to the task calling landlock_restrict_self(2) contrary to most other
Landlock allocations (see related comment).
The AUDIT_LANDLOCK_DOMAIN record follows the first AUDIT_LANDLOCK_ACCESS
record for the same domain, which is always followed by AUDIT_SYSCALL
and AUDIT_PROCTITLE. This is in line with the audit logic to first
record the cause of an event, and then add context with other types of
record.
Audit event sample for a first denial:
type=LANDLOCK_ACCESS msg=audit(1732186800.349:44): domain=195ba459b blockers=ptrace opid=1 ocomm="systemd"
type=LANDLOCK_DOMAIN msg=audit(1732186800.349:44): domain=195ba459b status=allocated mode=enforcing pid=300 uid=0 exe="/root/sandboxer" comm="sandboxer"
type=SYSCALL msg=audit(1732186800.349:44): arch=c000003e syscall=101 success=no [...] pid=300 auid=0
Audit event sample for a following denial:
type=LANDLOCK_ACCESS msg=audit(1732186800.372:45): domain=195ba459b blockers=ptrace opid=1 ocomm="systemd"
type=SYSCALL msg=audit(1732186800.372:45): arch=c000003e syscall=101 success=no [...] pid=300 auid=0
Log domain deletion with the "deallocated" state when a domain was
previously logged. This makes it possible for log parsers to free
potential resources when a domain ID will never show again.
The number of denied access requests is useful to easily check how many
access requests a domain blocked and potentially if some of them are
missing in logs because of audit rate limiting, audit rules, or Landlock
log configuration flags (see following commit).
Audit event sample for a deletion of a domain that denied something:
type=LANDLOCK_DOMAIN msg=audit(1732186800.393:46): domain=195ba459b status=deallocated denials=2
Cc: Günther Noack <gnoack@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-11-mic@digikod.net
[mic: Update comment and GFP flag for landlock_log_drop_domain()]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new AUDIT_LANDLOCK_ACCESS record type dedicated to an access
request denied by a Landlock domain. AUDIT_LANDLOCK_ACCESS indicates
that something unexpected happened.
For now, only denied access are logged, which means that any
AUDIT_LANDLOCK_ACCESS record is always followed by a SYSCALL record with
"success=no". However, log parsers should check this syscall property
because this is the only sign that a request was denied. Indeed, we
could have "success=yes" if Landlock would support a "permissive" mode.
We could also add a new field to AUDIT_LANDLOCK_DOMAIN for this mode
(see following commit).
By default, the only logged access requests are those coming from the
same executed program that enforced the Landlock restriction on itself.
In other words, no audit record are created for a task after it called
execve(2). This is required to avoid log spam because programs may only
be aware of their own restrictions, but not the inherited ones.
Following commits will allow to conditionally generate
AUDIT_LANDLOCK_ACCESS records according to dedicated
landlock_restrict_self(2)'s flags.
The AUDIT_LANDLOCK_ACCESS message contains:
- the "domain" ID restricting the action on an object,
- the "blockers" that are missing to allow the requested access,
- a set of fields identifying the related object (e.g. task identified
with "opid" and "ocomm").
The blockers are implicit restrictions (e.g. ptrace), or explicit access
rights (e.g. filesystem), or explicit scopes (e.g. signal). This field
contains a list of at least one element, each separated with a comma.
The initial blocker is "ptrace", which describe all implicit Landlock
restrictions related to ptrace (e.g. deny tracing of tasks outside a
sandbox).
Add audit support to ptrace_access_check and ptrace_traceme hooks. For
the ptrace_access_check case, we log the current/parent domain and the
child task. For the ptrace_traceme case, we log the parent domain and
the current/child task. Indeed, the requester and the target are the
current task, but the action would be performed by the parent task.
Audit event sample:
type=LANDLOCK_ACCESS msg=audit(1729738800.349:44): domain=195ba459b blockers=ptrace opid=1 ocomm="systemd"
type=SYSCALL msg=audit(1729738800.349:44): arch=c000003e syscall=101 success=no [...] pid=300 auid=0
A following commit adds user documentation.
Add KUnit tests to check reading of domain ID relative to layer level.
The quick return for non-landlocked tasks is moved from task_ptrace() to
each LSM hooks.
It is not useful to inline the audit_enabled check because other
computation are performed by landlock_log_denial().
Use scoped guards for RCU read-side critical sections.
Cc: Günther Noack <gnoack@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-10-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmfhlLATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXgchCADOz33rSm4G4w4r0qT05dTDi/lZkEdK
64dQq322XXP/C9FfR66d30243gsAmuM5a0SvzFHLXAOu6yqM270Xehd/Rud+Um2s
lSVnc0Ux0AWBgksqFd0t577aN7zmJEukosEYO5lBNop+zOcadrm3S6Th/AoL2h/D
yphPkhH13bsCK+Wll/eBOQLIhC9iA0konYbBLuEQ5MqvUbrzc6Rmb5gxsHHZKOqg
vLjkrYR/d3s2gIpKxiFp0RwvzGyffZEHxvU/YF3hTenPMlTlnXWbyspBSTVmWggP
13IFLzqxDdW9RgUnGB4xRc424AC1LKqEr42QPQE7zGvl2jdJriA2Q1LT
=BXqj
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Add support for running as the root partition in Hyper-V (Microsoft
Hypervisor) by exposing /dev/mshv (Nuno and various people)
- Add support for CPU offlining in Hyper-V (Hamza Mahfooz)
- Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael
Kelley, Thorsten Blum)
* tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: fix an indentation issue in mshyperv.h
x86/hyperv: Add comments about hv_vpset and var size hypercall input args
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs
hyperv: Add definitions for root partition driver to hv headers
x86: hyperv: Add mshv_handler() irq handler and setup function
Drivers: hv: Introduce per-cpu event ring tail
Drivers: hv: Export some functions for use by root partition module
acpi: numa: Export node_to_pxm()
hyperv: Introduce hv_recommend_using_aeoi()
arm64/hyperv: Add some missing functions to arm64
x86/mshyperv: Add support for extended Hyper-V features
hyperv: Log hypercall status codes as strings
x86/hyperv: Fix check of return value from snp_set_vmsa()
x86/hyperv: Add VTL mode callback for restarting the system
x86/hyperv: Add VTL mode emergency restart callback
hyperv: Remove unused union and structs
hyperv: Add CONFIG_MSHV_ROOT to gate root partition support
hyperv: Change hv_root_partition into a function
hyperv: Convert hypercall statuses to linux error codes
drivers/hv: add CPU offlining support
...
* Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
* Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
* Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
* Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
* Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
* pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
* Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
* Remove unnecessary header include path
* Assume constant PGD during VM context switch
* Add perf events support for guest VM
RISC-V:
* Disable the kernel perf counter during configure
* KVM selftests improvements for PMU
* Fix warning at the time of KVM module removal
x86:
* Add support for aging of SPTEs without holding mmu_lock. Not taking mmu_lock
allows multiple aging actions to run in parallel, and more importantly avoids
stalling vCPUs. This includes an implementation of per-rmap-entry locking;
aging the gfn is done with only a per-rmap single-bin spinlock taken, whereas
locking an rmap for write requires taking both the per-rmap spinlock and
the mmu_lock.
Note that this decreases slightly the accuracy of accessed-page information,
because changes to the SPTE outside aging might not use atomic operations
even if they could race against a clear of the Accessed bit. This is
deliberate because KVM and mm/ tolerate false positives/negatives for
accessed information, and testing has shown that reducing the latency of
aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
* Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
* Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
* Drop "support" for async page faults for protected guests that do not set
SEND_ALWAYS (i.e. that only want async page faults at CPL3)
* Bring a bit of sanity to x86's VM teardown code, which has accumulated
a lot of cruft over the years. Particularly, destroy vCPUs before
the MMU, despite the latter being a VM-wide operation.
* Add common secure TSC infrastructure for use within SNP and in the
future TDX
* Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
* Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
* Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
* Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend
notifier only accounts for kvmclock, and there's no evidence that the
flag is actually supported by Xen guests.
* Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
* Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
* Restrict the Xen hypercall MSR index to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
* Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
* Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks; there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of the TSC leaves should be rare, i.e. are not a hot path.
x86 (Intel):
* Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
* Pass XFD_ERR as the payload when injecting #NM, as a preparatory step
for upcoming FRED virtualization support.
* Decouple the EPT entry RWX protection bit macros from the EPT Violation
bits, both as a general cleanup and in anticipation of adding support for
emulating Mode-Based Execution Control (MBEC).
* Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
* Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
x86 (AMD):
* Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
* Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
* Add macros and helpers for setting GHCB return/error codes.
* Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
* Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
* Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
* Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
Selftests:
* Fix again the Intel PMU counters test; add a data load and do CLFLUSH{OPT} on the data
instead of executing code. The theory is that modern Intel CPUs have
learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
* Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
* Fix a few minor bugs related to handling of stats FDs.
* Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
* Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfcTkEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMnQAf/cPx72hJOdNy4Qrm8M33YLXVRVV00
yEZ8eN8TWdOclr0ltE/w/ELGh/qS4CU8pjURAk0A6lPioU+mdcTn3dPEqMDMVYom
uOQ2lusEHw0UuSnGZSEjvZJsE/Ro2NSAsHIB6PWRqig1ZBPJzyu0frce34pMpeQH
diwriJL9lKPAhBWXnUQ9BKoi1R0P5OLW9ahX4SOWk7cAFg4DLlDE66Nqf6nKqViw
DwEucTiUEg5+a3d93gihdD4JNl+fb3vI2erxrMxjFjkacl0qgqRu3ei3DG0MfdHU
wNcFSG5B1n0OECKxr80lr1Ip1KTVNNij0Ks+w6Gc6lSg9c4PptnNkfLK3A==
=nnCN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
-----BEGIN PGP SIGNATURE-----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=XCdn
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for skb TX SND/COMPLETION timestamping
- hci_core: Enable buffer flow control for SCO/eSCO
- coredump: Log devcd dumps into the monitor
drivers:
- btusb: Add 2 HWIDs for MT7922
- btusb: Fix regression in the initialization of fake Bluetooth controllers
- btusb: Add 14 USB device IDs for Qualcomm WCN785x
- btintel: Add support for Intel Scorpius Peak
- btintel: Add support to configure TX power
- btintel: Add DSBR support for ScP
- btintel_pcie: Add device id of Whale Peak
- btintel_pcie: Setup buffers for firmware traces
- btintel_pcie: Read hardware exception data
- btintel_pcie: Add support for device coredump
- btintel_pcie: Trigger device coredump on hardware exception
- btnxpuart: Support for controller wakeup gpio config
- btnxpuart: Add support to set BD address
- btnxpuart: Add correct bootloader error codes
- btnxpuart: Handle bootloader error during cmd5 and cmd7
- btnxpuart: Fix kernel panic during FW release
- qca: add WCN3950 support
- hci_qca: use the power sequencer for wcn6750
- btmtksdio: Prevent enabling interrupts after IRQ handler removal
* tag 'for-net-next-2025-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (53 commits)
Bluetooth: MGMT: Add LL Privacy Setting
Bluetooth: hci_event: Fix handling of HCI_EV_LE_DIRECT_ADV_REPORT
Bluetooth: btnxpuart: Fix kernel panic during FW release
Bluetooth: btnxpuart: Handle bootloader error during cmd5 and cmd7
Bluetooth: btnxpuart: Add correct bootloader error codes
t blameBluetooth: btintel: Fix leading white space
Bluetooth: btintel: Add support to configure TX power
Bluetooth: btmtksdio: Prevent enabling interrupts after IRQ handler removal
Bluetooth: btmtk: Remove the resetting step before downloading the fw
Bluetooth: SCO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: add support for skb TX SND/COMPLETION timestamping
net-timestamp: COMPLETION timestamp on packet tx completion
HCI: coredump: Log devcd dumps into the monitor
Bluetooth: HCI: Add definition of hci_rp_remote_name_req_cancel
Bluetooth: hci_vhci: Mark Sync Flow Control as supported
Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
Bluetooth: btintel_pci: Fix build warning
Bluetooth: btintel_pcie: Trigger device coredump on hardware exception
...
====================
Link: https://patch.msgid.link/20250325192925.2497890-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity under
the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can observe
a partially initialized timer. That's mostly a theoretical problem, but
incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update cycle
without reading the actual hardware clock. NTP frequency adjustment can
set the base time backwards. The fine grained interfaces compensate
this by reading the clock and applying the new conversion factor, but
the coarse grained time getters use the base time directly. That allows
the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the frequency
with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer restore
mechanism prone to massive contention on the global hash bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a
timer. The printout happens with sighand lock held and interrupts
disabled. That's not required as this can be done with RCU protection
as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible for
both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency usage
in io/uring. Make the debug checks conditional and enable them only
when lockdep is enabled.
- Small updates, cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=XUGH
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity
under the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can
observe a partially initialized timer. That's mostly a theoretical
problem, but incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update
cycle without reading the actual hardware clock. NTP frequency
adjustment can set the base time backwards. The fine grained
interfaces compensate this by reading the clock and applying the new
conversion factor, but the coarse grained time getters use the base
time directly. That allows the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the
frequency with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer
restore mechanism prone to massive contention on the global hash
bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a timer.
The printout happens with sighand lock held and interrupts disabled.
That's not required as this can be done with RCU protection as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible
for both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency
usage in io/uring. Make the debug checks conditional and enable them
only when lockdep is enabled.
- Small updates, cleanups and improvements
* tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
selftests/timers: Improve skew_consistency by testing with other clockids
timekeeping: Fix possible inconsistencies in _COARSE clockids
posix-timers: Drop redundant memset() invocation
selftests/timers/posix-timers: Add a test for exact allocation mode
posix-timers: Provide a mechanism to allocate a given timer ID
posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held
posix-timers: Make per process list RCU safe
posix-timers: Avoid false cacheline sharing
posix-timers: Switch to jhash32()
posix-timers: Improve hash table performance
posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t
posix-timers: Make lock_timer() use guard()
posix-timers: Rework timer removal
posix-timers: Simplify lock/unlock_timer()
posix-timers: Use guards in a few places
posix-timers: Remove SLAB_PANIC from kmem cache
posix-timers: Remove a few paranoid warnings
posix-timers: Cleanup includes
posix-timers: Add cond_resched() to posix_timer_add() search loop
posix-timers: Initialise timer before adding it to the hash table
...
Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp
when hardware reports a packet completed.
Completion tstamp is useful for Bluetooth, as hardware timestamps do not
exist in the HCI specification except for ISO packets, and the hardware
has a queue where packets may wait. In this case the software SND
timestamp only reflects the kernel-side part of the total latency
(usually small) and queue length (usually 0 unless HW buffers
congested), whereas the completion report time is more informative of
the true latency.
It may also be useful in other cases where HW TX timestamps cannot be
obtained and user wants to estimate an upper bound to when the TX
probably happened.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
struct virtio_net_rss_config was less useful in actual code because of a
flexible array placed in the middle. Add new structures that split it
into two to avoid having a flexible array in the middle.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20250321-virtio-v2-1-33afb8f4640b@daynix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
-----BEGIN PGP SIGNATURE-----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=HSDM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
More features for 6.15, major changes:
* cfg80211/mac80211: fix and enable link reconfiguration
* rtw88: support RTL8814AE/RTL8814AU
* mt7996: preparations for MLO
* ath12k: continued work on MLO
* iwlwifi: add new iwlmld sub-driver/op-mode for
some current and future devices
* wfx: wowlan support
* tag 'wireless-next-2025-03-20' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (311 commits)
wifi: mt76: mt7996: fix locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table
wifi: mt76: mt792x: re-register CHANCTX_STA_CSA only for the mt7921 series
wifi: mt76: mt7996: Update mt7996_tx to MLO support
wifi: mt76: mt7996: rework mt7996_ampdu_action to support MLO
wifi: mt76: mt7996: rework set/get_tsf callabcks to support MLO
wifi: mt76: mt7996: set vif default link_id adding/removing vif links
wifi: mt76: mt7996: rework mt7996_mcu_beacon_inband_discov to support MLO
wifi: mt76: mt7996: rework mt7996_mcu_add_obss_spr to support MLO
wifi: mt76: mt7996: rework mt7996_net_fill_forward_path to support MLO
wifi: mt76: mt7996: rework mt7996_update_mu_group to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_poll to support MLO
wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO
wifi: mt76: mt7996: remove mt7996_mac_enable_rtscts()
wifi: mt76: mt7996: rework mt7996_sta_hw_queue_read to support MLO
wifi: mt76: mt7996: rework mt7996_set_hw_key to support MLO
wifi: mt76: mt7996: Add mt7996_sta_link to mt7996_mcu_add_bss_info signature
wifi: mt76: mt7996: rework mt7996_sta_set_4addr and mt7996_sta_set_decap_offload to support MLO
wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO
wifi: mt76: mt7996: Rely on wcid_to_sta in mt7996_mac_add_txs_skb()
...
====================
Link: https://patch.msgid.link/20250320131106.33266-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 14a1968074 ("net: reorganize IP MIB values") changed
MIB values to group hot fields together.
Since then 5 new fields have been added without caring about
data locality.
This patch moves IPSTATS_MIB_OUTPKTS, IPSTATS_MIB_NOECTPKTS,
IPSTATS_MIB_ECT1PKTS, IPSTATS_MIB_ECT0PKTS, IPSTATS_MIB_CEPKTS
to the hot portion of per-cpu data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250320101434.3174412-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This extends the VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT ioctls to attach/detach
a given pasid of a vfio device to/from an IOAS/HWPT.
Link: https://patch.msgid.link/r/20250321180143.8468-4-yi.l.liu@intel.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The underlying infrastructure has supported the PASID attach and related
enforcement per the requirement of the IOMMU_HWPT_ALLOC_PASID flag. This
extends iommufd to support PASID compatible domain requested by userspace.
Link: https://patch.msgid.link/r/20250321171940.7213-15-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Support adjusting/reading delayed ack max for socket level by using
set/getsockopt().
This option aligns with TCP_BPF_DELACK_MAX usage. Considering that bpf
option was implemented before this patch, so we need to use a standalone
new option for pure tcp set/getsockopt() use.
Add WRITE_ONCE/READ_ONCE() to prevent data-race if setsockopt()
happens to write one value to icsk_delack_max while icsk_delack_max is
being read.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250317120314.41404-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support adjusting/reading RTO MIN for socket level by using set/getsockopt().
This new option has the same effect as TCP_BPF_RTO_MIN, which means it
doesn't affect RTAX_RTO_MIN usage (by using ip route...). Considering that
bpf option was implemented before this patch, so we need to use a standalone
new option for pure tcp set/getsockopt() use.
When the socket is created, its icsk_rto_min is set to the default
value that is controlled by sysctl_tcp_rto_min_us. Then if application
calls setsockopt() with TCP_RTO_MIN_US flag to pass a valid value, then
icsk_rto_min will be overridden in jiffies unit.
This patch adds WRITE_ONCE/READ_ONCE to avoid data-race around
icsk_rto_min.
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250317120314.41404-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support (Peter Zijlstra)
[ NOTE: this got (mis-)merged into the perf tree due to related work. ]
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter Zijlstra,
Ravi Bangoria, Thorsten Blum, XieLudan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iPmA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core:
- Move perf_event sysctls into kernel/events/ (Joel Granados)
- Use POLLHUP for pinned events in error (Namhyung Kim)
- Avoid the read if the count is already updated (Peter Zijlstra)
- Allow the EPOLLRDNORM flag for poll (Tao Chen)
- locking/percpu-rwsem: Add guard support [ NOTE: this got
(mis-)merged into the perf tree due to related work ] (Peter
Zijlstra)
perf_pmu_unregister() related improvements: (Peter Zijlstra)
- Simplify the perf_event_alloc() error path
- Simplify the perf_pmu_register() error path
- Simplify perf_pmu_register()
- Simplify perf_init_event()
- Simplify perf_event_alloc()
- Merge struct pmu::pmu_disable_count into struct
perf_cpu_pmu_context::pmu_disable_count
- Add this_cpc() helper
- Introduce perf_free_addr_filters()
- Robustify perf_event_free_bpf_prog()
- Simplify the perf_mmap() control flow
- Further simplify perf_mmap()
- Remove retry loop from perf_mmap()
- Lift event->mmap_mutex in perf_mmap()
- Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes
- Fix perf_mmap() failure path
Uprobes:
- Harden x86 uretprobe syscall trampoline check (Jiri Olsa)
- Remove redundant spinlock in uprobe_deny_signal() (Liao Chang)
- Remove the spinlock within handle_singlestep() (Liao Chang)
x86 Intel PMU enhancements:
- Support PEBS counters snapshotting (Kan Liang)
- Fix intel_pmu_read_event() (Kan Liang)
- Extend per event callchain limit to branch stack (Kan Liang)
- Fix system-wide LBR profiling (Kan Liang)
- Allocate bts_ctx only if necessary (Li RongQing)
- Apply static call for drain_pebs (Peter Zijlstra)
x86 AMD PMU enhancements: (Ravi Bangoria)
- Remove pointless sample period check
- Fix ->config to sample period calculation for OP PMU
- Fix perf_ibs_op.cnt_mask for CurCnt
- Don't allow freq mode event creation through ->config interface
- Add PMU specific minimum period
- Add ->check_period() callback
- Ceil sample_period to min_period
- Add support for OP Load Latency Filtering
- Update DTLB/PageSize decode logic
Hardware breakpoints:
- Return EOPNOTSUPP for unsupported breakpoint type (Saket Kumar
Bhaskar)
Hardlockup detector improvements: (Li Huafei)
- perf_event memory leak
- Warn if watchdog_ev is leaked
Fixes and cleanups:
- Misc fixes and cleanups (Andy Shevchenko, Kan Liang, Peter
Zijlstra, Ravi Bangoria, Thorsten Blum, XieLudan)"
* tag 'perf-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf: Fix __percpu annotation
perf: Clean up pmu specific data
perf/x86: Remove swap_task_ctx()
perf/x86/lbr: Fix shorter LBRs call stacks for the system-wide mode
perf: Supply task information to sched_task()
perf: attach/detach PMU specific data
locking/percpu-rwsem: Add guard support
perf: Save PMU specific data in task_struct
perf: Extend per event callchain limit to branch stack
perf/ring_buffer: Allow the EPOLLRDNORM flag for poll
perf/core: Use POLLHUP for pinned events in error
perf/core: Use sysfs_emit() instead of scnprintf()
perf/core: Remove optional 'size' arguments from strscpy() calls
perf/x86/intel/bts: Check if bts_ctx is allocated when calling BTS functions
uprobes/x86: Harden uretprobe syscall trampoline check
watchdog/hardlockup/perf: Warn if watchdog_ev is leaked
watchdog/hardlockup/perf: Fix perf_event memory leak
perf/x86: Annotate struct bts_buffer::buf with __counted_by()
perf/core: Clean up perf_try_init_event()
perf/core: Fix perf_mmap() failure path
...
- Significant changes throughout the tree to bring Python code up to
current standards and raise the minimum Python required to 3.9. Much of
this is preparatory to replacing the ancient Perl scripts/kernel-doc
horror with a slightly less horrifying Python implementation, expected
for 6.16.
- Update the minimum Sphinx required to 3.4.3, allowing us to remove a
bunch of older compatibility code.
- Rework and improve the generation of the ABI documentation.
(All of the above done by Mauro)
- Lots of translation updates. Alex Shi and Yanteng Si are taking on
responsibility for the Chinese translations going forward; that work will
still get to you via docs-next
- Try to standardize the format for indicating a developer's affiliation in
commit tags.
- Clarify the TAB's role in CoC enforcement actions.
- Try to spell out the rules for when a commit tag can name another
developer without their explicit permission.
Plus lots of other typo fixes and updates.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmfccxwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoYcH/jL/nS8YAiJ3awF5PH5tR3m5ddt9l+fKXWJx
PB3KcHtDORbWltTA+Tvo2aP1jxGY9wqsIIvl+nvjJyUcfd72g4HNfTDUDXwP3OFU
wTkaEAQp3n/hqnLXtJ2AzV3Ir5cIfEL2d7F6QsN1Gnof8iu2OuMk5iMeb0iexUX6
FYjJq+jknh30VdAp2hxHy8q17R7h7PySh5OsjeAYJJroLv60n3DwQgnzHjXC/FT2
Qq1UuEzlSpRoso2o2NwVTND6OVW081umo6YrioqD7ZC2G2fhRgLFJJtJGXDNcyUl
gQv9xLSaTD97V4zaWPm28ObNBpY/GnAd4hMjB17wAH5xUfVS5Aw=
=Gvdp
-----END PGP SIGNATURE-----
Merge tag 'docs-6.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a reasonably busy cycle for docs...
- Significant changes throughout the tree to bring Python code up to
current standards and raise the minimum Python required to 3.9
Much of this is preparatory to replacing the ancient Perl
scripts/kernel-doc horror with a slightly less horrifying Python
implementation, expected for 6.16
- Update the minimum Sphinx required to 3.4.3, allowing us to remove
a bunch of older compatibility code
- Rework and improve the generation of the ABI documentation
(All of the above done by Mauro)
- Lots of translation updates. Alex Shi and Yanteng Si are taking on
responsibility for the Chinese translations going forward; that
work will still get to you via docs-next
- Try to standardize the format for indicating a developer's
affiliation in commit tags
- Clarify the TAB's role in CoC enforcement actions
- Try to spell out the rules for when a commit tag can name another
developer without their explicit permission
Plus lots of other typo fixes and updates"
* tag 'docs-6.15' of git://git.lwn.net/linux: (98 commits)
docs/zh_CN: fix spelling mistake
docs/Chinese: change the disclaimer words
docs/zh_CN: Add snp-tdx-threat-model index Chinese translation
docs: driver-api: firmware: clarify userspace requirements
docs: clarify rules wrt tagging other people
docs: Remove outdated highuid.rst documentation
Documentation: dma-buf: heaps: Add heap name definitions
docs/.../submit-checklist: Use Documentation/admin-guide/abi.rst for cross-ref of README
docs: Correct installation instruction
Documentation: kcsan: fix "Plain Accesses and Data Races" URL in kcsan.rst
Documentation/CoC: Spell out the TAB role in enforcement decisions
Documentation: ocxl.rst: Update consortium site
scripts: get_feat.pl: substitute s390x with s390
scripts/kernel-doc: drop dead code for Wcontents_before_sections
scripts/kernel-doc: don't add not needed new lines
docs: driver-api/infiniband.rst: fix Kerneldoc markup
drivers: firewire: firewire-cdev.h: fix identation on a kernel-doc markup
drivers: media: intel-ipu3.h: fix identation on a kernel-doc markup
include/asm-generic/io.h: fix kerneldoc markup
Docs/arch/arm64: Fix spelling in amu.rst
...
Kavita Kavita