Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1.
Nothing major here, just lots of tiny updates for most of the common USB
drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTLNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn29wCcD23xCSWuRIKHfSWlefCwptHKT0AAoM0NJdeO
C4/4pui5ifTu1g5Vud1r
=Sm/3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
- The 6 patch series "panic: sys_info: Refactor and fix a potential
issue" from Andy Shevchenko fixes a build issue and does some cleanup in
ib/sys_info.c.
- The 9 patch series "Implement mul_u64_u64_div_u64_roundup()" from
David Laight enhances the 64-bit math code on behalf of a PWM driver and
beefs up the test module for these library functions.
- The 2 patch series "scripts/gdb/symbols: make BPF debug info available
to GDB" from Ilya Leoshkevich makes BPF symbol names, sizes, and line
numbers available to the GDB debugger.
- The 4 patch series "Enable hung_task and lockup cases to dump system
info on demand" from Feng Tang adds a sysctl which can be used to cause
additional info dumping when the hung-task and lockup detectors fire.
- The 6 patch series "lib/base64: add generic encoder/decoder, migrate
users" from Kuan-Wei Chiu adds a general base64 encoder/decoder to lib/
and migrates several users away from their private implementations.
- The 2 patch series "rbree: inline rb_first() and rb_last()" from Eric
Dumazet makes TCP a little faster.
- The 9 patch series "liveupdate: Rework KHO for in-kernel users" from
Pasha Tatashin reworks the KEXEC Handover interfaces in preparation for
Live Update Orchestrator (LUO), and possibly for other future clients.
- The 13 patch series "kho: simplify state machine and enable dynamic
updates" from Pasha Tatashin increases the flexibility of KEXEC
Handover. Also preparation for LUO.
- The 18 patch series "Live Update Orchestrator" from Pasha Tatashin is
a major new feature targeted at cloud environments. Quoting the [0/N]:
This series introduces the Live Update Orchestrator, a kernel subsystem
designed to facilitate live kernel updates using a kexec-based reboot.
This capability is critical for cloud environments, allowing hypervisors
to be updated with minimal downtime for running virtual machines. LUO
achieves this by preserving the state of selected resources, such as
memory, devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving memfd file
descriptors, which allows critical in-memory data, such as guest RAM or
any other large memory region, to be maintained in RAM across the kexec
reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- The 3 patch series "kexec: reorganize kexec and kdump sysfs" from
Sourabh Jain moves the kexec and kdump sysfs entries from /sys/kernel/
to /sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day.
- The 2 patch series "kho: fixes for vmalloc restoration" from Mike
Rapoport fixes a BUG which was being hit during KHO restoration of
vmalloc() regions.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTSAkQAKCRDdBJ7gKXxA
jrkiAP9QKfsRv46XZaM5raScjY1ayjP+gqb2rgt6BQ/gZvb2+wD/cPAYOR6BiX52
n0pVpQmG5P/KyOmpLztn96ejL4heKwQ=
=JY96
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
Mike Snitzer's mechanism for disabling I/O caching introduced in
v6.18 is extended to include using direct I/O. The goal is to
further reduce the memory footprint consumed by NFS clients
accessing large data sets via NFSD.
The NFSD community adopted a maintainer entry profile during this
cycle. See
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst
Work continues on hardening NFSD's implementation of the pNFS block
layout type. This type enables pNFS clients to directly access the
underlying block devices that contain an exported file system,
reducing server overhead and increasing data throughput.
The remaining patches in this pull request are clean-ups and minor
optimizations. Many thanks to the contributors, reviewers, testers,
and bug reporters who participated during the v6.19 NFSD development
cycle.
-----BEGIN PGP SIGNATURE-----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=E0oM
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- Mike Snitzer's mechanism for disabling I/O caching introduced in
v6.18 is extended to include using direct I/O. The goal is to further
reduce the memory footprint consumed by NFS clients accessing large
data sets via NFSD.
- The NFSD community adopted a maintainer entry profile during this
cycle. See
Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst
- Work continues on hardening NFSD's implementation of the pNFS block
layout type. This type enables pNFS clients to directly access the
underlying block devices that contain an exported file system,
reducing server overhead and increasing data throughput.
- The remaining patches are clean-ups and minor optimizations. Many
thanks to the contributors, reviewers, testers, and bug reporters who
participated during the v6.19 NFSD development cycle.
* tag 'nfsd-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (38 commits)
NFSD: nfsd-io-modes: Separate lists
NFSD: nfsd-io-modes: Wrap shell snippets in literal code blocks
NFSD: Add toctree entry for NFSD IO modes docs
NFSD: add Documentation/filesystems/nfs/nfsd-io-modes.rst
NFSD: Implement NFSD_IO_DIRECT for NFS WRITE
NFSD: Make FILE_SYNC WRITEs comply with spec
NFSD: Add trace point for SCSI fencing operation.
NFSD: use correct reservation type in nfsd4_scsi_fence_client
xdrgen: Don't generate unnecessary semicolon
xdrgen: Fix union declarations
NFSD: don't start nfsd if sv_permsocks is empty
xdrgen: handle _XdrString in union encoder/decoder
xdrgen: Fix the variable-length opaque field decoder template
xdrgen: Make the xdrgen script location-independent
xdrgen: Generalize/harden pathname construction
lockd: don't allow locking on reexported NFSv2/3
MAINTAINERS: add a nfsd blocklayout reviewer
nfsd: Use MD5 library instead of crypto_shash
nfsd: stop pretending that we cache the SEQUENCE reply.
NFS: nfsd-maintainer-entry-profile: Inline function name prefixes
...
- Introduce the PCI/TSM core for the coordination of device
authentication, link encryption and establishment (IDE), and later
management of the device security operational states (TDISP). Notify
the new TSM core layer of PCI device arrival and departure.
- Add a low level TSM driver for the link encryption establishment
capabilities of the AMD SEV-TIO architecture.
- Add a library of helpers TSM drivers to use for IDE establishment and
the DOE transport.
- Add skeleton support for 'bind' and 'guest_request' operations in
support of TDISP.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCaTOdAwAKCRDfioYZHlFs
Z/fWAQDS5mwS/8rn0UdH/SijTm/oKVxdiyIQbTstrjk8AySITgEA5ki9w2iKa0WG
x1ACZKlo9gS9emyx4wuJpCBIMtR50Qc=
=B4oG
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe Link Encryption and Device Authentication from Dan Williams:
"New PCI infrastructure and one architecture implementation for PCIe
link encryption establishment via platform firmware services.
This work is the result of multiple vendors coming to consensus on
some core infrastructure (thanks Alexey, Yilun, and Aneesh!), and
three vendor implementations, although only one is included in this
pull. The PCI core changes have an ack from Bjorn, the crypto/ccp/
changes have an ack from Tom, and the iommu/amd/ changes have an ack
from Joerg.
PCIe link encryption is made possible by the soup of acronyms
mentioned in the shortlog below. Link Integrity and Data Encryption
(IDE) is a protocol for installing keys in the transmitter and
receiver at each end of a link. That protocol is transported over Data
Object Exchange (DOE) mailboxes using PCI configuration requests.
The aspect that makes this a "platform firmware service" is that the
key provisioning and protocol is coordinated through a Trusted
Execution Envrionment (TEE) Security Manager (TSM). That is either
firmware running in a coprocessor (AMD SEV-TIO), or quasi-hypervisor
software (Intel TDX Connect / ARM CCA) running in a protected CPU
mode.
Now, the only reason to ask a TSM to run this protocol and install the
keys rather than have a Linux driver do the same is so that later, a
confidential VM can ask the TSM directly "can you certify this
device?".
That precludes host Linux from provisioning its own keys, because host
Linux is outside the trust domain for the VM. It also turns out that
all architectures, save for one, do not publish a mechanism for an OS
to establish keys in the root port. So "TSM-established link
encryption" is the only cross-architecture path for this capability
for the foreseeable future.
This unblocks the other arch implementations to follow in v6.20/v7.0,
once they clear some other dependencies, and it unblocks the next
phase of work to implement the end-to-end flow of confidential device
assignment. The PCIe specification calls this end-to-end flow Trusted
Execution Environment (TEE) Device Interface Security Protocol
(TDISP).
In the meantime, Linux gets a link encryption facility which has
practical benefits along the same lines as memory encryption. It
authenticates devices via certificates and may protect against
interposer attacks trying to capture clear-text PCIe traffic.
Summary:
- Introduce the PCI/TSM core for the coordination of device
authentication, link encryption and establishment (IDE), and later
management of the device security operational states (TDISP).
Notify the new TSM core layer of PCI device arrival and departure
- Add a low level TSM driver for the link encryption establishment
capabilities of the AMD SEV-TIO architecture
- Add a library of helpers TSM drivers to use for IDE establishment
and the DOE transport
- Add skeleton support for 'bind' and 'guest_request' operations in
support of TDISP"
* tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm: (23 commits)
crypto/ccp: Fix CONFIG_PCI=n build
virt: Fix Kconfig warning when selecting TSM without VIRT_DRIVERS
crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)
iommu/amd: Report SEV-TIO support
psp-sev: Assign numbers to all status codes and add new
ccp: Make snp_reclaim_pages and __sev_do_cmd_locked public
PCI/TSM: Add 'dsm' and 'bound' attributes for dependent functions
PCI/TSM: Add pci_tsm_guest_req() for managing TDIs
PCI/TSM: Add pci_tsm_bind() helper for instantiating TDIs
PCI/IDE: Initialize an ID for all IDE streams
PCI/IDE: Add Address Association Register setup for downstream MMIO
resource: Introduce resource_assigned() for discerning active resources
PCI/TSM: Drop stub for pci_tsm_doe_transfer()
drivers/virt: Drop VIRT_DRIVERS build dependency
PCI/TSM: Report active IDE streams
PCI/IDE: Report available IDE streams
PCI/IDE: Add IDE establishment helpers
PCI: Establish document for PCI host bridge sysfs attributes
PCI: Add PCIe Device 3 Extended Capability enumeration
PCI/TSM: Establish Secure Sessions and Link Encryption
...
Rust module parameter support:
- Add Rust module parameter support, enabling Rust kernel modules to declare
and use module parameters. The rust_minimal sample module demonstrates this,
and the rust null block driver will be the first to use it in the next cycle.
This also adds the Rust module files under the modules subsystem as agreed
between the Rust and modules maintainers.
Hardening:
- Add compile-time check for embedded NUL characters in MODULE_*() macros. This
module metadata was once used (and maybe still) to bypass license enforcement
(LWN article [1] from 2003). This change required a sparse fix [2] which you
reviewed.
MAINTAINERS:
- Add Aaron Tomlin as reviewer for the Modules subsystem.
The changes have been in linux-next for 4 weeks. Recent 0day reports for UM [3]
and arm64 [4] builds were not reproducible and traced to a buggy bindgen version
combined with unreleased clang-22 in 0day. The Rust team has reported this to
0day.
As discussed previously, we rotate module maintainership among co-maintainers
every 6 months. Sami Tolvanen is next in line and will send the next pull
request. As a reminder, Luis has already announced [5] he will gradually step
away as maintainer.
Link: https://lwn.net/Articles/82305/ [1]
Link: https://lore.kernel.org/linux-sparse/CACePvbVG2KrGQq4cNKV=wbO5h=jp3M0RO1SdfX8kV4OukjPG8A@mail.gmail.com/T/#mf838b3e2e3245d88c30a801ea7473d5a5c0eb121 [2]
Link: https://lore.kernel.org/oe-kbuild-all/202511210858.uwVivgvn-lkp@intel.com/ [3]
Link: https://lore.kernel.org/oe-kbuild-all/202512020454.Tf36WHw5-lkp@intel.com/ [4]
Link: https://lore.kernel.org/linux-modules/aGiAF8IQ4PRYn0th@bombadil.infradead.org/ [5]
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
-----BEGIN PGP SIGNATURE-----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=ujQB
-----END PGP SIGNATURE-----
Merge tag 'modules-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"Rust module parameter support:
- Add Rust module parameter support, enabling Rust kernel modules to
declare and use module parameters. The rust_minimal sample module
demonstrates this, and the rust null block driver will be the first
to use it in the next cycle. This also adds the Rust module files
under the modules subsystem as agreed between the Rust and modules
maintainers.
Hardening:
- Add compile-time check for embedded NUL characters in MODULE_*()
macros. This module metadata was once used (and maybe still) to
bypass license enforcement (LWN article from 2003):
https://lwn.net/Articles/82305/ [1]
MAINTAINERS:
- Add Aaron Tomlin as reviewer for the Modules subsystem"
* tag 'modules-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
MAINTAINERS: Add myself as reviewer for module support
module: Add compile-time check for embedded NUL characters
media: radio: si470x: Fix DRIVER_AUTHOR macro definition
media: dvb-usb-v2: lmedm04: Fix firmware macro definitions
modules: add rust modules files to MAINTAINERS
rust: samples: add a module parameter to the rust_minimal sample
rust: module: update the module macro with module parameter support
rust: module: use a reference in macros::module::module
rust: introduce module_param module
rust: str: add radix prefixed integer parsing functions
rust: sync: add `SetOnce`
- Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in RISC-V
- CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
- debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
- Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
- Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
- kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
- Misc:
- Increase the name size in struct auxiliary_device_id to 40 characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
- Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap functions
- Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware parent() for
Device<Bound>
- Illustrate how to safely obtain a driver's device private data when
calling from an auxiliary driver into the parant device driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned initializer,
i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding and
guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device abstractions to
derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert an
IrqVector bound to specific pci::Device into an IrqRequest bound to the
same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for UserSliceReader
- Implement write_slice_partial() and write_slice_file() for UserSliceWriter
- sysfs
- Prepare the constification of struct attribute
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaTAehwAKCRBFlHeO1qrK
LmzvAP0TWwKUGIduccknIa1AFvBM92lWVZptSysotv3SLFZq3wD9GBLIENt1DkEk
s+GBqbobPgoyaodaysqLQ/SNqF9TcAM=
=Wutw
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
Some device tree cleanups and a maintainer add.
Fix a race when handling channel updates that could result in errors
being reported to the user in some cases.
-----BEGIN PGP SIGNATURE-----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=RpBy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.19-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Minor IPMI fixes:
- Some device tree cleanups and a maintainer add
- Fix a race when handling channel updates that could result in
errors being reported to the user in some cases"
* tag 'for-linus-6.19-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: Add entry on Loongson-2K IPMI driver
dt-bindings: ipmi: Convert aspeed,ast2400-ibt-bmc to DT schema
dt-bindings: ipmi: Convert nuvoton,npcm750-kcs-bmc to DT schema
ipmi: Skip channel scan if channels are already marked ready
ipmi: Fix __scan_channels() failing to rescan channels
ipmi: Fix the race between __scan_channels() and deliver_response()
Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series. The biggest core
change is the new allocation of pseudo-devices which allow the sending
of internal commands to a given SCSI target.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaTJf+BsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUC9QEA+q+UqGr7hPTs9C4kdLoxjDpG6tmXo11H
ZkuXKjR5rDABAPPe3HV0Bk9C9jpLVPLp+fGJvgw//rib+XtYMjwxAJ71
=bQZL
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
These updates came a little late, or were based on a later 6.18-rc
tag than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC drivers
-----BEGIN PGP SIGNATURE-----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=YvxQ
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC driver updates from Arnd Bergmann:
"These updates came a little late, or were based on a later 6.18-rc tag
than the others:
- A new driver for cache management on cxl devices with memory shared
in a coherent cluster. This is part of the drivers/cache/ tree, but
unlike the other drivers that back the dma-mapping interfaces, this
one is needed only during CPU hotplug.
- A shared branch for reset controllers using swnode infrastructure
- Added support for new SoC variants in the Amlogic soc_device
identification
- Minor updates in Freescale, Microchip, Samsung, and Apple SoC
drivers"
* tag 'soc-drivers-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
soc: samsung: exynos-pmu: fix device leak on regmap lookup
soc: samsung: exynos-pmu: Fix structure initialization
soc: fsl: qbman: use kmalloc_array() instead of kmalloc()
soc: fsl: qbman: add WQ_PERCPU to alloc_workqueue users
MAINTAINERS: Update email address for Christophe Leroy
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
...
This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for
power management, as a preparation for future Tegra specific
changes.
- Reset controller updates with added drivers for LAN969x, eic770
and RZ/G3S SoCs.
- Protection of system controller registers on Renesas and Google SoCs,
to prevent trivially triggering a system crash from e.g. debugfs
access.
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas
-----BEGIN PGP SIGNATURE-----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=HvlN
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using
custom "Tensix" cores for computation offload managed by
Linux running on SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree.
-----BEGIN PGP SIGNATURE-----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=3eAN
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive SoCs,
based on 16 Cortex-A720 (Armv9.2) cores, which makes the the currently
highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs, this
one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip based
on Cortex-A53, and closely related to MSM8917 (Snapdragn 425), which we
already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree, with
the majority of the changes going into the Qualcomm, NXP, Renesas and
Rockchips platforms.
-----BEGIN PGP SIGNATURE-----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=1SN1
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
- The 10 patch series "__vmalloc()/kvmalloc() and no-block support" from
Uladzislau Rezki reworks the vmalloc() code to support non-blocking
allocations (GFP_ATOIC, GFP_NOWAIT).
- The 2 patch series "ksm: fix exec/fork inheritance" from xu xin fixes
a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not inherited
across fork/exec.
- The 4 patch series "mm/zswap: misc cleanup of code and documentations"
from SeongJae Park does some light maintenance work on the zswap code.
- The 5 patch series "mm/page_owner: add debugfs files 'show_handles'
and 'show_stacks_handles'" from Mauricio Faria de Oliveira enhances the
/sys/kernel/debug/page_owner debug feature. It adds unique identifiers
to differentiate the various stack traces so that userspace monitoring
tools can better match stack traces over time.
- The 2 patch series "mm/page_alloc: pcp->batch cleanups" from Joshua
Hahn makes some minor alterations to the page allocator's per-cpu-pages
feature.
- The 2 patch series "Improve UFFDIO_MOVE scalability by removing
anon_vma lock" from Lokesh Gidra addresses a scalability issue in
userfaultfd's UFFDIO_MOVE operation.
- The 2 patch series "kasan: cleanups for kasan_enabled() checks" from
Sabyrzhan Tasbolatov performs some cleanup in the KASAN code.
- The 2 patch series "drivers/base/node: fold node register and
unregister functions" from Donet Tom cleans up the NUMA node handling
code a little.
- The 4 patch series "mm: some optimizations for prot numa" from Kefeng
Wang provides some cleanups and small optimizations to the NUMA
allocation hinting code.
- The 5 patch series "mm/page_alloc: Batch callers of
free_pcppages_bulk" from Joshua Hahn addresses long lock hold times at
boot on large machines. These were causing (harmless) softlockup
warnings.
- The 2 patch series "optimize the logic for handling dirty file folios
during reclaim" from Baolin Wang removes some now-unnecessary work from
page reclaim.
- The 10 patch series "mm/damon: allow DAMOS auto-tuned for per-memcg
per-node memory usage" from SeongJae Park enhances the DAMOS auto-tuning
feature.
- The 2 patch series "mm/damon: fixes for address alignment issues in
DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan fixes DAMON_LRU_SORT
and DAMON_RECLAIM with certain userspace configuration.
- The 15 patch series "expand mmap_prepare functionality, port more
users" from Lorenzo Stoakes enhances the new(ish)
file_operations.mmap_prepare() method and ports additional callsites
from the old ->mmap() over to ->mmap_prepare().
- The 8 patch series "Fix stale IOTLB entries for kernel address space"
from Lu Baolu fixes a bug (and possible security issue on non-x86) in
the IOMMU code. In some situations the IOMMU could be left hanging onto
a stale kernel pagetable entry.
- The 4 patch series "mm/huge_memory: cleanup __split_unmapped_folio()"
from Wei Yang cleans up and optimizes the folio splitting code.
- The 5 patch series "mm, swap: misc cleanup and bugfix" from Kairui
Song implements some cleanups and a minor fix in the swap discard code.
- The 8 patch series "mm/damon: misc documentation fixups" from SeongJae
Park does as advertised.
- The 9 patch series "mm/damon: support pin-point targets removal" from
SeongJae Park permits userspace to remove a specific monitoring target
in the middle of the current targets list.
- The 2 patch series "mm: MISC follow-up patches for linux/pgalloc.h"
from Harry Yoo implements a couple of cleanups related to mm header file
inclusion.
- The 2 patch series "mm/swapfile.c: select swap devices of default
priority round robin" from Baoquan He improves the selection of swap
devices for NUMA machines.
- The 3 patch series "mm: Convert memory block states (MEM_*) macros to
enums" from Israel Batista changes the memory block labels from macros
to enums so they will appear in kernel debug info.
- The 3 patch series "ksm: perform a range-walk to jump over holes in
break_ksm" from Pedro Demarchi Gomes addresses an inefficiency when KSM
unmerges an address range.
- The 22 patch series "mm/damon/tests: fix memory bugs in kunit tests"
from SeongJae Park fixes leaks and unhandled malloc() failures in DAMON
userspace unit tests.
- The 2 patch series "some cleanups for pageout()" from Baolin Wang
cleans up a couple of minor things in the page scanner's
writeback-for-eviction code.
- The 2 patch series "mm/hugetlb: refactor sysfs/sysctl interfaces" from
Hui Zhu moves hugetlb's sysfs/sysctl handling code into a new file.
- The 9 patch series "introduce VM_MAYBE_GUARD and make it sticky" from
Lorenzo Stoakes makes the VMA guard regions available in /proc/pid/smaps
and improves the mergeability of guarded VMAs.
- The 2 patch series "mm: perform guard region install/remove under VMA
lock" from Lorenzo Stoakes reduces mmap lock contention for callers
performing VMA guard region operations.
- The 2 patch series "vma_start_write_killable" from Matthew Wilcox
starts work in permitting applications to be killed when they are
waiting on a read_lock on the VMA lock.
- The 11 patch series "mm/damon/tests: add more tests for online
parameters commit" from SeongJae Park adds additional userspace testing
of DAMON's "commit" feature.
- The 9 patch series "mm/damon: misc cleanups" from SeongJae Park does
that.
- The 2 patch series "make VM_SOFTDIRTY a sticky VMA flag" from Lorenzo
Stoakes addresses the possible loss of a VMA's VM_SOFTDIRTY flag when
that VMA is merged with another.
- The 16 patch series "mm: support device-private THP" from Balbir Singh
introduces support for Transparent Huge Page (THP) migration in zone
device-private memory.
- The 3 patch series "Optimize folio split in memory failure" from Zi
Yan optimizes folio split operations in the memory failure code.
- The 2 patch series "mm/huge_memory: Define split_type and consolidate
split support checks" from Wei Yang provides some more cleanups in the
folio splitting code.
- The 16 patch series "mm: remove is_swap_[pte, pmd]() + non-swap
entries, introduce leaf entries" from Lorenzo Stoakes cleans up our
handling of pagetable leaf entries by introducing the concept of
'software leaf entries', of type softleaf_t.
- The 4 patch series "reparent the THP split queue" from Muchun Song
reparents the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory resources.
- The 3 patch series "unify PMD scan results and remove redundant
cleanup" from Wei Yang does a little cleanup in the hugepage collapse
code.
- The 6 patch series "zram: introduce writeback bio batching" from
Sergey Senozhatsky improves zram writeback efficiency by introducing
batched bio writeback support.
- The 4 patch series "memcg: cleanup the memcg stats interfaces" from
Shakeel Butt cleans up our handling of the interrupt safety of some
memcg stats.
- The 4 patch series "make vmalloc gfp flags usage more apparent" from
Vishal Moola cleans up vmalloc's handling of incoming GFP flags.
- The 6 patch series "mm: Add soft-dirty and uffd-wp support for RISC-V"
from Chunyan Zhang teches soft dirty and userfaultfd write protect
tracking to use RISC-V's Svrsw60t59b extension.
- The 5 patch series "mm: swap: small fixes and comment cleanups" from
Youngjun Park fixes a small bug and cleans up some of the swap code.
- The 4 patch series "initial work on making VMA flags a bitmap" from
Lorenzo Stoakes starts work on converting the vma struct's flags to a
bitmap, so we stop running out of them, especially on 32-bit.
- The 2 patch series "mm/swapfile: fix and cleanup swap list iterations"
from Youngjun Park addresses a possible bug in the swap discard code and
cleans things up a little.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTEb0wAKCRDdBJ7gKXxA
jjfIAP94W4EkCCwNOupnChoG+YWw/JW21anXt5NN+i5svn1yugEAwzvv6A+cAFng
o+ug/fyrfPZG7PLp2R8WFyGIP0YoBA4=
=IUzS
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
- Adapt the ftracetest script to be run from a different folder
This uses the already existing OPT_TEST_DIR but extends it further to run
independent tests, then add an --rv flag to allow using the script for
testing RV (mostly) independently on ftrace.
- Add basic RV selftests in selftests/verification for more validations
Add more validations for available/enabled monitors and reactors. This
could have caught the bug introducing kernel panic solved above. Tests use
ftracetest.
- Convert react() function in reactor to use va_list directly
Use a central helper to handle the variadic arguments. Clean up macros
and mark functions as static.
- Add lockdep annotations to reactors to have lockdep complain of errors
If the reactors are called from improper context. Useful to develop new
reactors. This highlights a warning in the panic reactor that is related
to the printk subsystem and not to RV.
- Convert core RV code to use lock guards and __free helpers
This completely removes goto statements.
- Fix compilation if !CONFIG_RV_REACTORS
Fix the warning by keeping LTL monitor variable as always static.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaTBoVxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtWpAQDxPQAJQvBZ41l9q9Cis7PqGGezT4Nv
g6Fh/ydMOlJCsQD/R0Xd5JxPmBI8FLCwCfqHo7wYKUhP8GfL/ORPEWhU2gI=
=EEot
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Adapt the ftracetest script to be run from a different folder
This uses the already existing OPT_TEST_DIR but extends it further to
run independent tests, then add an --rv flag to allow using the
script for testing RV (mostly) independently on ftrace.
- Add basic RV selftests in selftests/verification for more validations
Add more validations for available/enabled monitors and reactors.
This could have caught the bug introducing kernel panic solved above.
Tests use ftracetest.
- Convert react() function in reactor to use va_list directly
Use a central helper to handle the variadic arguments. Clean up
macros and mark functions as static.
- Add lockdep annotations to reactors to have lockdep complain of
errors
If the reactors are called from improper context. Useful to develop
new reactors. This highlights a warning in the panic reactor that is
related to the printk subsystem and not to RV.
- Convert core RV code to use lock guards and __free helpers
This completely removes goto statements.
- Fix compilation if !CONFIG_RV_REACTORS
Fix the warning by keeping LTL monitor variable as always static.
* tag 'trace-rv-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix compilation if !CONFIG_RV_REACTORS
rv: Convert to use __free
rv: Convert to use lock guard
rv: Add explicit lockdep context for reactors
rv: Make rv_reacting_on() static
rv: Pass va_list to reactors
selftests/verification: Add initial RV tests
selftest/ftrace: Generalise ftracetest to use with RV
- Officially add Tomas Glozar as a maintainer to RTLA tool
- Add for_each_monitored_cpu() helper
In multiple places, RTLA tools iterate over the list of CPUs running
tracer threads.
Use single helper instead of repeating the for/if combination.
- Remove unused variable option_index in argument parsing
RTLA tools use getopt_long() for argument parsing. For its last
argument, an unused variable "option_index" is passed.
Remove the variable and pass NULL to getopt_long() to shorten
the naturally long parsing functions, and make them more readable.
- Fix unassigned nr_cpus after code consolidation
In recent code consolidation, timerlat tool cleanup, previously
implemented separately for each tool, was moved to a common function
timerlat_free().
The cleanup relies on nr_cpus being set. This was not done in the new
function, leaving the variable uninitialized.
Initialize the variable properly, and remove silencing of compiler
warning for uninitialized variables.
- Stop tracing on user latency in BPF mode
Despite the name, rtla-timerlat's -T/--thread option sets timerlat's
stop_tracing_total_us option, which also stops tracing on
return-from-user latency, not only on thread latency.
Implement the same behavior also in BPF sample collection stop tracing
handler to avoid a discrepancy and restore correspondence of behavior
with the equivalent option of cyclictest.
- Fix threshold actions always triggering
A bug in threshold action logic caused the action to execute even
if tracing did not stop because of threshold.
Fix the logic to stop correctly.
- Fix few minor issues in tests
Extend tests that were shown to need it to 5s, fix osnoise test
calling timerlat by mistake, and use new, more reliable output
checking in timerlat's "top stop at failed action" test.
- Do not print usage on argument parsing error
RTLA prints the entire usage message on encountering errors in
argument parsing, like a malformed CPU list.
The usage message has gotten too long. Instead of printing it,
use newly added fatal() helper function to simply exit with
the error message, excluding the usage.
- Fix unintuitive -C/--cgroup interface
"-C cgroup" and "--cgroup cgroup" are invalid syntax, despite that
being a common way to specify an option with argument. Moreover,
using them fails silently and no cgroup is set.
Create new helper function to unify the handling of all such options
and allow all of:
-Xsomething
-X=something
-X something
as well as the equivalent for the long option.
- Fix -a overriding -t argument filename
Fix a bug where -a following -t custom_file.txt overrides the custom
filename with the default timerlat_trace.txt.
- Stop tracing correctly on multiple events at once
In some race scenarios, RTLA BPF sample collection might send multiple
stop tracing events via the BPF ringbuffer at once.
Compare the number of events for != 0 instead of == 1 to cover for
this scenario and stop tracing properly.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaS9bxBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhrgAP0a/AtsL9+IFXAK5JK8aO1XWApVyK9n
48FRZWu/jrupuAD7BO+EHazmPEourNaUqYPeuymwxT+4O47RH1Q/aasLQwo=
=RvNH
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rtla trace tooling updates from Steven Rostedt:
- Officially add Tomas Glozar as a maintainer to RTLA tool
- Add for_each_monitored_cpu() helper
In multiple places, RTLA tools iterate over the list of CPUs running
tracer threads.
Use single helper instead of repeating the for/if combination.
- Remove unused variable option_index in argument parsing
RTLA tools use getopt_long() for argument parsing. For its last
argument, an unused variable "option_index" is passed.
Remove the variable and pass NULL to getopt_long() to shorten the
naturally long parsing functions, and make them more readable.
- Fix unassigned nr_cpus after code consolidation
In recent code consolidation, timerlat tool cleanup, previously
implemented separately for each tool, was moved to a common function
timerlat_free().
The cleanup relies on nr_cpus being set. This was not done in the new
function, leaving the variable uninitialized.
Initialize the variable properly, and remove silencing of compiler
warning for uninitialized variables.
- Stop tracing on user latency in BPF mode
Despite the name, rtla-timerlat's -T/--thread option sets timerlat's
stop_tracing_total_us option, which also stops tracing on
return-from-user latency, not only on thread latency.
Implement the same behavior also in BPF sample collection stop
tracing handler to avoid a discrepancy and restore correspondence of
behavior with the equivalent option of cyclictest.
- Fix threshold actions always triggering
A bug in threshold action logic caused the action to execute even if
tracing did not stop because of threshold.
Fix the logic to stop correctly.
- Fix few minor issues in tests
Extend tests that were shown to need it to 5s, fix osnoise test
calling timerlat by mistake, and use new, more reliable output
checking in timerlat's "top stop at failed action" test.
- Do not print usage on argument parsing error
RTLA prints the entire usage message on encountering errors in
argument parsing, like a malformed CPU list.
The usage message has gotten too long. Instead of printing it, use
newly added fatal() helper function to simply exit with the error
message, excluding the usage.
- Fix unintuitive -C/--cgroup interface
"-C cgroup" and "--cgroup cgroup" are invalid syntax, despite that
being a common way to specify an option with argument. Moreover,
using them fails silently and no cgroup is set.
Create new helper function to unify the handling of all such options
and allow all of:
-Xsomething
-X=something
-X something
as well as the equivalent for the long option.
- Fix -a overriding -t argument filename
Fix a bug where -a following -t custom_file.txt overrides the custom
filename with the default timerlat_trace.txt.
- Stop tracing correctly on multiple events at once
In some race scenarios, RTLA BPF sample collection might send
multiple stop tracing events via the BPF ringbuffer at once.
Compare the number of events for != 0 instead of == 1 to cover for
this scenario and stop tracing properly.
* tag 'trace-tools-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat: Exit top main loop on any non-zero wait_retval
rtla/tests: Don't rely on matching ^1ALL
rtla: Fix -a overriding -t argument
rtla: Fix -C/--cgroup interface
tools/rtla: Replace osnoise_hist_usage("...") with fatal("...")
tools/rtla: Replace osnoise_top_usage("...") with fatal("...")
tools/rtla: Replace timerlat_hist_usage("...") with fatal("...")
tools/rtla: Replace timerlat_top_usage("...") with fatal("...")
tools/rtla: Add fatal() and replace error handling pattern
rtla/tests: Fix osnoise test calling timerlat
rtla/tests: Extend action tests to 5s
tools/rtla: Fix --on-threshold always triggering
rtla/timerlat_bpf: Stop tracing on user latency
tools/rtla: Fix unassigned nr_cpus
tools/rtla: Remove unused optional option_index
tools/rtla: Add for_each_monitored_cpu() helper
MAINTAINERS: Add Tomas Glozar as a maintainer to RTLA tool
vfio:
- add a vfio_pci variant driver for Intel
xe/i915 display:
- add plane color management support
xe:
- Add scope-based cleanup helper for runtime PM
- vfio xe driver prerequisites and exports
- fix vfio link error
- Fix a memory leak
- Fix a 64-bit division
- vf migration fix
- LRC pause fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmkyMUgACgkQDHTzWXnE
hr69pg/9EWjh7qVGk9ZIpYc9AW42UzWwOVBX/HWkuQvmfxUUBqtA3IuP0dGGmPUn
QbtbetbRvlCaXwEoZpPh1nzrXA2AGFxgHErYMO5BfwquyBcfpwTWZ9T15ptceL/3
aw2l63aH1R2/yxCRfHFIdwAmq1bThqdh5IkjjbE3im0V0lHT2Uo/jhmf/EWCNWol
LlPgYxHpfBIzhtFYUcniaXxs9vOSk49AY+ObpPpuvks8OWoaaTcKYWlUCHr/X1ip
OnWB4NGraTzx4l44vqdRvRL5/KPY7N2IcAxU7rXFTacWp6UoESph5DCYLsPREONb
OsK1pVbAsKATobeoAC9J+utILhfDmKM8Z7eSAlNE+X+nk/BKu4h9Pp1TnKfo7bCz
0tER/OrsqnYMfxj1PawT3xpf/KUWkL0aqnRJpmA2cvJqTz8Qnb4h6kRQp1iAKp80
XaBL1v0uzVE/J4ffuA5bzkT71w3hjN5ytLyEe7h1Y43E/jxyQgyTIHM8cX/UrreJ
RboaakyoTv1u1xrd9Mzx4WCzwKryH+JFY2nekAC3YnSCcGYnSScSNM/ARTrYC2pf
wNbWBvkq7ZFy9eybaZQ/zaSYyVO7yQDjdCAqO+SA+xfRuwF41uiADJptyC+FgMPw
nIBaeid314tJQ9uGNPJH0f2BzLzSvH569trUp/7hbOYWC69XeQI=
=jyth
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm updates from Dave Airlie:
"There was some additional intel code for color operations we wanted to
land. However I discovered I missed a pull for the xe vfio driver
which I had sorted into 6.20 in my brain, until Thomas mentioned it.
This contains the xe vfio code, a bunch of xe fixes that were waiting
and the i915 color management support. I'd like to include it as part
of keeping the two main vendors on the same page and giving a good
cross-driver experience for userspace when it starts using it.
vfio:
- add a vfio_pci variant driver for Intel
xe/i915 display:
- add plane color management support
xe:
- Add scope-based cleanup helper for runtime PM
- vfio xe driver prerequisites and exports
- fix vfio link error
- Fix a memory leak
- Fix a 64-bit division
- vf migration fix
- LRC pause fix"
* tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/i915/color: Enable Plane Color Pipelines
drm/i915/color: Add 3D LUT to color pipeline
drm/i915/color: Add registers for 3D LUT
drm/i915/color: Program Plane Post CSC Registers
drm/i915/color: Program Pre-CSC registers
drm/i915/color: Add framework to program PRE/POST CSC LUT
drm/i915: Add register definitions for Plane Post CSC
drm/i915: Add register definitions for Plane Degamma
drm/i915/color: Add plane CTM callback for D12 and beyond
drm/i915/color: Preserve sign bit when int_bits is Zero
drm/i915/color: Add framework to program CSC
drm/i915/color: Create a transfer function color pipeline
drm/i915/color: Add helper to create intel colorop
drm/i915: Add intel_color_op
drm/i915/display: Add identifiers for driver specific blocks
drm/xe/pf: fix VFIO link error
drm/xe: Protect against unset LRC when pausing submissions
drm/xe/vf: Start re-emission from first unsignaled job during VF migration
drm/xe/pf: Use div_u64 when calculating GGTT profile
drm/xe: Fix memory leak when handling pagefault vma
...
- Minor driver bug fixes and updates to cxgb4, rxe, rdmavt, bnxt_re, mlx5
- Many bug fix patches for irdma
- WQ_PERCPU annotations and system_dfl_wq changes
- Improved mlx5 support for "other eswitches" and multiple PFs
- 1600Gbps link speed reporting support. Four Digits Now!
- New driver bng_en for latest generation Broadcom NICs
- Bonding support for hns
- Adjust mlx5's hmm based ODP to work with the very large address space
created by the new 5 level paging default on x86
- Lockdep fixups in rxe and siw
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaS9AIgAKCRCFwuHvBreF
YXS2AP99rRv3hue5jLELuDqyPOORTzVfpKfAOcR2V3l30AP3mwEA1j/jontz1Ak+
oTNrL7Tv1rAxopB24yTLuFmIXEXHCAE=
=3PJv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has another new RDMA driver 'bng_en' for latest generation
Broadcom NICs. There might be one more new driver still to come.
Otherwise it is a fairly quite cycle. Summary:
- Minor driver bug fixes and updates to cxgb4, rxe, rdmavt, bnxt_re,
mlx5
- Many bug fix patches for irdma
- WQ_PERCPU annotations and system_dfl_wq changes
- Improved mlx5 support for "other eswitches" and multiple PFs
- 1600Gbps link speed reporting support. Four Digits Now!
- New driver bng_en for latest generation Broadcom NICs
- Bonding support for hns
- Adjust mlx5's hmm based ODP to work with the very large address
space created by the new 5 level paging default on x86
- Lockdep fixups in rxe and siw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep
RDMA/siw: reclassify sockets in order to avoid false positives from lockdep
RDMA/bng_re: Remove prefetch instruction
RDMA/core: Reduce cond_resched() frequency in __ib_umem_release
RDMA/irdma: Fix SRQ shadow area address initialization
RDMA/irdma: Remove doorbell elision logic
RDMA/irdma: Do not set IBK_LOCAL_DMA_LKEY for GEN3+
RDMA/irdma: Do not directly rely on IB_PD_UNSAFE_GLOBAL_RKEY
RDMA/irdma: Add missing mutex destroy
RDMA/irdma: Fix SIGBUS in AEQ destroy
RDMA/irdma: Add a missing kfree of struct irdma_pci_f for GEN2
RDMA/irdma: Fix data race in irdma_free_pble
RDMA/irdma: Fix data race in irdma_sc_ccq_arm
RDMA/mlx5: Add support for 1600_8x lane speed
RDMA/core: Add new IB rate for XDR (8x) support
IB/mlx5: Reduce IMR KSM size when 5-level paging is enabled
RDMA/bnxt_re: Pass correct flag for dma mr creation
RDMA/bnxt_re: Fix the inline size for GenP7 devices
RDMA/hns: Support reset recovery for bond
RDMA/hns: Support link state reporting for bond
...
Including:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason. This has good potential for
unifying more IO page-table implementations and making future
enhancements more easy. But this also needed quite some fixes during
development. All known issues have been fixed, but my feeling is that
there is a higher potential than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb().
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA.
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for funky
Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support.
- Move ARM IO-pgtable selftests to kunit.
- Device leak fixes for a couple of drivers.
- Random smaller fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=KG7j
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
-----BEGIN PGP SIGNATURE-----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=qSzr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
* Add support for Awinic AW99706 backlight driver.
* Add GPIOLIB dependency to backlight ktd2801 driver.
* Add devlink to LED Backlight's supplier LEDs to enforce correct removal
order and prevent NULL pointer dereferences.
* Fix kernel-doc warnings in lp855x.h
* Do not include <linux/fb.h> in backlight.h.
* Fix unused function warnings from suspend/resume ops in aw99706.c by
switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr().
* Add Awinic AW99706 backlight binding to MAINTAINERS.
* Add Awinic AW99706 backlight binding documentation.
-----BEGIN PGP SIGNATURE-----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=n4gn
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Additions:
- Add support for Awinic AW99706 backlight driver
Fixes:
- Add GPIOLIB dependency to backlight ktd2801 driver
- Add devlink to LED Backlight's supplier LEDs to enforce correct
removal order and prevent NULL pointer dereferences
- Fix kernel-doc warnings in lp855x.h
Removals:
- Do not include <linux/fb.h> in backlight.h
- Fix unused function warnings from suspend/resume ops in aw99706.c
by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr()
Bindings:
- Add Awinic AW99706 backlight binding to MAINTAINERS
- Add Awinic AW99706 backlight binding documentation"
* tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: aw99706: Fix unused function warnings from suspend/resume ops
backlight: lp855x: Fix lp855x.h kernel-doc warnings
dt-bindings: leds: backlight: Add Awinic AW99706 backlight
backlight: aw99706: Add support for Awinic AW99706 backlight
backlight: led-bl: Add devlink to supplier LEDs
backlight: ktd2801: Depend on GPIOLIB
backlight: Do not include <linux/fb.h> in header file
* Add Core, Regulator, Onkey and Battery Charger support for the NXP PF1550
Power Management IC (PMIC).
* Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc.
* Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the tqmx86 driver.
* Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver.
* Hook up the qnap-mcu-eeprom sub-device to qnap-mcu.
* Enable compile testing for the Altera SOCFPGA System Manager driver.
* Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle().
* Reserve the unused second I2C address for DA9063 to prevent userspace
interference.
* Fix resource leak in da9055_device_init() by calling regmap_del_irq_chip()
in the error path.
* Fix potential IRQ chip conflict when probing multiple MAX77620 devices by
using devm_kmemdup for regmap_irq_chip.
* Return -EPROBE_DEFER when a syscon devuice is not found to allow deferred
probing.
* Update email address for the PF1550 PMIC driver in MAINTAINERS.
* Correct file entry for PF1550 MFD driver in MAINTAINERS from pfd1550.h to
pf1550.h.
* Calculate checksum on the actual number of received bytes in qnap-mcu for
error messages.
* Use -EPROTO instead of -EIO for checksum errors in qnap-mcu.
* Add proper error handling for command errors (e.g., "@8", "@9") in qnap-mcu.
* Fix missing irq_domain_remove() in error path of mt63{58,97}_irq_init().
* Mark SMC write buffer arguments as const in apple_smc_write(), apple_smc_rw(),
and apple_smc_write_atomic().
* Simplify the error handling path in da9055_device_init() by removing a
redundant mfd_remove_devices() call.
* Use regmap_reg_range() and a real one-element array for pmic_status_range in
rohm-bd718x7 for cleaner initialization.
* Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures when
I2C_K1's dependencies are disabled.
* Remove unneeded semicolon from ls2k_bmc_recover_pci_data().
* Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider compile testing
and non-OF systems.
* Make OF ID table style consistent in simple-mfd-i2c driver.
* Update header inclusions in simple-mfd-i2c to follow IWYU (Include What You
Use) principle.
* Move checksum verification logic to a separate function in qnap-mcu.
* Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify interrupt
handling.
* Drop a stray semicolon from sec-irq.c.
* Remove the unused TI WL1273 FM radio core driver.
* Remove the unused wl1273-core.h header and tidy up its reference in
documentation.
* Add Device Tree binding for the NXP PF1550 PMIC.
* Add missing GPIO pins and supply properties to the Silergy SY7636A PMIC
binding.
* Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination.
* Add Device Tree binding for the Renesas R2A11302FT PMIC.
* Allow the wakeup-source property in the Dialog DA9063 binding.
* Make interrupt-related properties optional in the TI TPS65910 PMIC binding.
* Document the Qualcomm PMIV0104 PMIC compatible string.
* Document the Qualcomm PM7550 PMIC compatible string.
* Enable power button subnode for TWL603x in the TI TWL binding.
* Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties.
* Document control-scb and sysreg-scb syscons on pic64gx with fallback
compatibles.
* Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu.
* Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child nodes and
missing properties.
* Add mt7981-topmisc compatible string to the syscon binding.
-----BEGIN PGP SIGNATURE-----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=2TS8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Updates:
- Add Core, Regulator, Onkey and Battery Charger support for the NXP
PF1550 Power Management IC (PMIC)
- Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc
- Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the
tqmx86 driver
- Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver
- Hook up the qnap-mcu-eeprom sub-device to qnap-mcu
Fixes:
- Enable compile testing for the Altera SOCFPGA System Manager driver
- Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle()
- Reserve the unused second I2C address for DA9063 to prevent
userspace interference
- Fix resource leak in da9055_device_init() by calling
regmap_del_irq_chip() in the error path
- Fix potential IRQ chip conflict when probing multiple MAX77620
devices by using devm_kmemdup for regmap_irq_chip
- Return -EPROBE_DEFER when a syscon devuice is not found to allow
deferred probing
- Update email address for the PF1550 PMIC driver in MAINTAINERS
- Correct file entry for PF1550 MFD driver in MAINTAINERS from
pfd1550.h to pf1550.h
- Calculate checksum on the actual number of received bytes in
qnap-mcu for error messages
- Use -EPROTO instead of -EIO for checksum errors in qnap-mcu
- Add proper error handling for command errors (e.g., "@8", "@9") in
qnap-mcu
- Fix missing irq_domain_remove() in error path of
mt63{58,97}_irq_init()
Cleanups:
- Mark SMC write buffer arguments as const in apple_smc_write(),
apple_smc_rw(), and apple_smc_write_atomic()
- Simplify the error handling path in da9055_device_init() by
removing a redundant mfd_remove_devices() call
- Use regmap_reg_range() and a real one-element array for
pmic_status_range in rohm-bd718x7 for cleaner initialization
- Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures
when I2C_K1's dependencies are disabled
- Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
- Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider
compile testing and non-OF systems
- Make OF ID table style consistent in simple-mfd-i2c driver
- Update header inclusions in simple-mfd-i2c to follow IWYU (Include
What You Use) principle
- Move checksum verification logic to a separate function in qnap-mcu
- Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify
interrupt handling
- Drop a stray semicolon from sec-irq.c
Removals:
- Remove the unused TI WL1273 FM radio core driver
- Remove the unused wl1273-core.h header and tidy up its reference in
documentation
Device tree bindings:
- Add Device Tree binding for the NXP PF1550 PMIC
- Add missing GPIO pins and supply properties to the Silergy SY7636A
PMIC binding
- Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination
- Add Device Tree binding for the Renesas R2A11302FT PMIC
- Allow the wakeup-source property in the Dialog DA9063 binding
- Make interrupt-related properties optional in the TI TPS65910 PMIC
binding
- Document the Qualcomm PMIV0104 PMIC compatible string
- Document the Qualcomm PM7550 PMIC compatible string
- Enable power button subnode for TWL603x in the TI TWL binding
- Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties
- Document control-scb and sysreg-scb syscons on pic64gx with
fallback compatibles
- Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu
- Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child
nodes and missing properties
- Add mt7981-topmisc compatible string to the syscon binding"
* tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits)
mfd: sec: Drop a stray semicolon
mfd: qnap-mcu: Hook up the EEPROM sub-device
dt-bindings: mfd: syscon: Add mt7981-topmisc
dt-bindings: mfd: fsl,mc13xxx: Fix LEDs node schema
mfd: mt6358-irq: Fix missing irq_domain_remove() in error path
mfd: mt6397-irq: Fix missing irq_domain_remove() in error path
dt-bindings: mfd: Document syscons falling back to atmel,sama5d2-sfrbu
dt-bindings: mfd: Document control-scb and sysreg-scb on pic64gx
dt-bindings: mfd: Convert dlg,da9052-i2c.txt to yaml format
mfd: sec: Use chained IRQs for s2mpg10
mfd: qnap-mcu: Add proper error handling for command errors
mfd: qnap-mcu: Move checksum verification to its own function
mfd: qnap-mcu: Use EPROTO in stead of EIO on checksum errors
mfd: qnap-mcu: Calculate the checksum on the actual number of bytes received
mfd: simple-mfd-i2c: Don't use "proxy" headers
mfd: simple-mfd-i2c: Make ID table style consistent
mfd: Kconfig: Drop OF dependency on MFD_MAX5970
mfd: ls2kbmc: Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
dt-bindings: mfd: twl: Enable power button also for TWL603X
MAINTAINERS: Adjust file entry in NXP PF1550 PMIC MFD DRIVER
...
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip: Add memory clock auto-gating support
- dw_mmc-rockchip: Add support for the RK3506 variant
- meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
- meson-mx-sdio: Refactoring and general code improvements
- renesas_sdhi: Enable bigger data ports where available
- renesas_sdhi: Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb: Add support for the BCM72116 and BCM74371 variants
- sdhci-brcmstb: Save/restore registers during system-wide suspend/resume
- sdhci-msm: Add support for the sm8750 and the Kaanapali variants
- sdhci-msm: Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc: Add command queue support for Rockchip SOCs
- sdhci-of-dwcmshc: Add support for the Eswin EIC7700 variant
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmkutuAXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCn30xAAqG+pVwtJLiAP26oKa43tvnHy
fwJRCKxLuh1S2JM95X5Q8E0bgFJfOoEM280DDZTxeJcVesIeZovLEVYfzGv53wkw
4QVbWrixzSww5PhGN25SbxswzqaYRuZt7BPeER2n1f5swgNAuHjnIAkOLw2sR7BF
gaCu/2/m5D0mgIQMUjmNe0bVYNWC1uuAI9GIamwKfbN+0tgwwruV6H6WUtvU+0wf
xXv3RC7R4kyI1fBG0CqC6MyGsdcj2mQC9WG92ZlS+V9vnY3wDcwnD8Kcb9IKehBH
sOBwPGpAPkTmvIwkmRaaiJzGHafdomCg73t7kLLeh642MKsmp/oN7XQwXxm6AM1j
WoCjA/cIAKjSI9vskjdd1LCUYs9Ja+b+LtrqfdcZvh1+MgpsJnpXIMm6npiwbqHv
MYnsLcx2NLfIU8jZnRePy5U/MCRvz5Ow5ADZDrwV2HQ31J7Y7FxHSN+lTPIWC7Fc
B4Gy6SPYIDQUP4aolEufbqE8UDqHXhZhVGGKKHPxpFWjkTfCRM99zsUONs9PBzrW
lkMMA6VKme2F66b2SDI65kZeFNUqtb+skmrzDnq3+v+SaPU14ToXBeY3dY42Ee15
nn4UcyGjQHh0wjQoeBI4gvkoiq9MIwJMmJwmxn3Z+NkrhO7V5ecrL7uMUGIYzxjY
YvDMdHmPmqjPZG8cQaU=
=Gf5H
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot enable
counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone to
bugs (GPIO controllers don't have to use the software node's name as
their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide array
of drivers in order to avoid having to use the __maybe_unused attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to user-space
in gpio-virtuser (this was previously not possible as this function
returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary calls
to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for gpio-pca953x,
which is a great addition as it's probably the most commonly used GPIO
expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson
-----BEGIN PGP SIGNATURE-----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=Mw+x
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
* New drivers
- Driver for Apple Silicon SMC
- Driver for TSC1641 I2C power monitor
- Driver for MPS MP9945
- Driver for MAX17616
- Driver for MP2925 and MP2929
* Added support for new devices to existing drivers
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING,
ROG STRIX X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7,
and Pro WS TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
* Infrastructure updates
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
* Bug fixes
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
* Other changes and improvements
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=NviP
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Apple Silicon SMC
- TSC1641 I2C power monitor
- MPS MP9945
- MAX17616
- MP2925 and MP2929
Added support for new devices to existing drivers:
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING, ROG STRIX
X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7, and Pro WS
TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
Infrastructure updates:
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
Bug fixes:
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
Other changes and improvements:
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelist
hwmon: (max16065) Use local variable to avoid TOCTOU
hwmon: (w83l786ng) Convert macros to functions to avoid TOCTOU
hwmon: (max6697) fix regmap leak on probe failure
hwmon/w83781d: Drop REALLY_SLOW_IO setting
hwmon/lm78: Drop REALLY_SLOW_IO setting
hwmon: sy7636a: Fix regulator_enable resource leak on error path
hwmon: (adm1026) Convert macros to functions to avoid TOCTOU
hwmon: (adm1029) Add locking to avoid TOCTOU
hwmon: (lm87) Convert macros to functions to avoid TOCTOU
hwmon: (asus-ec-sensors) correct Pro WS TRX50-SAGE WIFI entry
hwmon: (vt8231) Convert macros to functions to avoid TOCTOU
hwmon: (emc2103) Add locking to avoid TOCTOU
hwmon: (aspeed-g6-pwm-tach): Add AST2700 compatible string
dt-bindings: hwmon: Add AST2700 compatible
hwmon: (asus-ec-sensors) add ROG STRIX X470-I GAMING
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
hwmon: (k10temp) Add AMD Steam Deck APU ID
hwmon: Add Apple Silicon SMC hwmon driver
Documentation/hwmon: Fix broken datasheet links for zl6100
...
This release is almost entirely new drivers, with a couple of small
changes in generic code. The biggest individual update is a rename of
the existing Microchip driver and the addition of a new driver for the
silicon SPI controller in their PolarFire SoCs. The overlap between the
soft IP supported by the current driver and this new one is regrettably
all in the IP and not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be defined
in relation to each other. This is useful for IIO type applcations
where you trigger an operation then read the result after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support more
in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT K1
QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought to
my attention, sorry about that.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt8qUACgkQJNaLcl1U
h9COSAf/buDi3hXYykhEbSlwl839u1XhCU9d8eJF8GhlWR87JeJCb8ou7RdMOQhE
HFehdoD2d5EcPc169cDp2uis8LovGZIPWuzh3D83eZpOOQTLMaQYBrDVNquBoKOR
WVFPPy9X/kb/IR63vM0b5Xv9K6l3ud4yauIsa0ingl9pZi5m2fB3ZEOx9siYYwAn
4fxv43jESbwdTfx33Yc4CkzctZEKuqI2JgLNe/mJZQsdYhS/nLvmDwiZ69k6b4ac
QSHQkP6i+fQzogcbip2z8dA3IUEhDjNQdBbtzmIot8Qbg7zXJkXpAlx2Wstw7Lt8
vLTUY/EHqKh39zok5GECq6E2R6W41w==
=Uw2/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and a
bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators.
- Undo enables done on supplies when setting enabling regulators via
constraints fails.
- Pull in some gpiolib changes adding support for shared GPIOs to
the gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time.
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363 and
MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's signed
tag with support for the device.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt72UACgkQJNaLcl1U
h9Dm2wf+JhjBLxviOozOhSv17wKnCYpApL12vPIHhv3lGu4J9wPiqqe3eB6PrTPo
xkuIb8u68wOveh7uLgr/kprH/YUxofrkCEwZjy57geSanuqIEzVoqU//4NKca9ND
UeoDiTYLx5JQVzlo12tSFhLCvDsFgdnemWFfubRPQGTJA/RElMxrNySf3yUQbYBE
ODpTGbXqt4LnYQTJRvVM8/0KzREpxD0X8fSISKpA3KYBFntMexZcgrs5pqijwfMS
Euxff2UpFzjodmYEusWfKOFeZXmd/cClF26Tol7oaeaurr1pNu1i0nBUprbd/rzL
YTV8QeiftLqER/h2iDX4f8iTmvVhzA==
=9IkF
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
Additional to the usual mix of core cleanups, driver changes, minor
fixes and device tree updates the highlight this cycle is Rust support
for the core and a first Rust driver both provided by Michal Wilczynski.
Michal wrote about these changes on
https://mwilczynski.dev/posts/bringing-rust-to-the-pwm-subsystem/ which
is a nice read.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmktTeIACgkQj4D7WH0S
/k5iuQf+KXBvcSYimI53UNQsT2e9uZc794w6tpQrauHuDp/szFyiGo6XaM+Hir3I
PS2F/2knI6puRlIyPFIxedlgSzNfpU5mXfNM86CmeuNefWVvOGBTU4lLg3ifEgGD
CU7mbV0HMVLX749CDTbrYxIPmSNnIx8bj5V4YIm78QtR3j2L6iTZIaXeF2Ip2FAI
AhNjkar3jk6apg5rbtSLC8At9OG5/JVgEdTuXCaEjCtnEkPz9Z4VPMOwzxzCK24q
EHPTBpAM+psBBr3KOTSMjAuVqfrx07L47e7597XitzcdGg+zVaOnFZpuWER1/t7+
1EAf8wlcYhi3GnUyXbaBzYq1FfhfEA==
=x9B8
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"In addition to the usual mix of core cleanups, driver changes, minor
fixes and device tree updates the highlight this cycle is Rust support
for the core and a first Rust driver both provided by Michal
Wilczynski.
Michal wrote about these changes on
https://mwilczynski.dev/posts/bringing-rust-to-the-pwm-subsystem/
which is a nice read"
* tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (22 commits)
pwm: rzg2l-gpt: Allow checking period_tick cache value only if sibling channel is enabled
pwm: bcm2835: Make sure the channel is enabled after pwm_request()
pwm: mediatek: Make use of struct_size macro
pwm: mediatek: Remove unneeded semicolon
pwm: airoha: Add support for EN7581 SoC
pwm: mediatek: Convert to waveform API
pwm: max7360: Clean MAX7360 code
pwm: Drop unused function pwm_apply_args()
pwm: Use %u to printf unsigned int pwm_chip::npwm and pwm_chip::id
pwm: Simplify printf to emit chip->npwm in $debugfs/pwm
pwm: th1520: Use module_pwm_platform_driver! macro
pwm: th1520: Fix clippy warning for redundant struct field init
pwm: Fix Rust formatting
dt-bindings: pwm: thead: Add T-HEAD TH1520 PWM controller
pwm: Add Rust driver for T-HEAD TH1520 SoC
rust: pwm: Fix broken intra-doc link
rust: pwm: Drop wrapping of PWM polarity and state
rust: pwm: Add module_pwm_platform_driver! macro
rust: pwm: Add complete abstraction layer
rust: pwm: Add Kconfig and basic data structures
...
The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there aren't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API clean works, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes.
-----BEGIN PGP SIGNATURE-----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=1JUI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
new driver:
- Arm Ethos-U65/U85 accel driver
core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement.
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA,
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel.
- ilitek-ili9881c : add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as
supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205
-----BEGIN PGP SIGNATURE-----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=gpnQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
- Major withdraw / error handling overhaul based on dlm's new
DLM_RELEASE_RECOVER feature: this allows gfs to treat withdraws like
node failures. Make withdraws asynchronous.
- Fix a bug in commit e4a8b5481c that caused 'df' to remain out of
sync. ('df' is still allowed to go slightly out of sync for short
periods of time.)
- Prevent recusive memory reclaim in gfs2_unstuff_dinode().
- Clean up SDF_JOURNAL_LIVE flag handling.
- Fix remote evict for read-only filesystems.
- Fix a misuse of bio_chain().
- Various other minor cleanups.
-----BEGIN PGP SIGNATURE-----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=AWK2
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Major withdraw / error handling overhaul based on dlm's new
DLM_RELEASE_RECOVER feature: this allows gfs to treat withdraws like
node failures. Make withdraws asynchronous
- Fix a bug in commit e4a8b5481c that caused 'df' to remain out of
sync. ('df' is still allowed to go slightly out of sync for short
periods of time)
- Prevent recusive memory reclaim in gfs2_unstuff_dinode()
- Clean up SDF_JOURNAL_LIVE flag handling
- Fix remote evict for read-only filesystems
- Fix a misuse of bio_chain()
- Various other minor cleanups
* tag 'gfs2-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (35 commits)
gfs2: Fix use of bio_chain
gfs2: Clean up SDF_JOURNAL_LIVE flag handling
gfs2: No longer thaw filesystems during a withdraw
gfs2: Withdraw immediately in gfs2_trans_add_meta
gfs2: New gfs2_withdraw_helper
gfs2: Clean up properly during a withdraw
gfs2: Rename gfs2_{gl_dq_holders => withdraw_glocks}
Revert "gfs2: fix infinite loop when checking ail item count before go_inval"
Revert "gfs2: Allow some glocks to be used during withdraw"
Revert "gfs2: Check for log write errors before telling dlm to unlock"
Revert "gfs2: fix a deadlock on withdraw-during-mount"
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (6/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (5/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (4/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (3/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (2/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (1/6)
Revert "gfs2: don't stop reads while withdraw in progress"
gfs2: Rename LM_FLAG_{NOEXP -> RECOVER}
gfs2: Kill gfs2_io_error_bh_wd
...
-----BEGIN PGP SIGNATURE-----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=m22w
-----END PGP SIGNATURE-----
Merge tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
Core & protocols
----------------
- Replace busylock at the Tx queuing layer with a lockless list. Resulting
in a 300% (4x) improvement on heavy TX workloads, sending twice the
number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue. Normally we perform queue re-selection when flow comes out
of idle, but under extreme circumstances the flows may be constantly
busy. Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already did
for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly
quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for packets.
- Make MPTCP use Rx backlog processing. This lowers the lock pressure,
improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor fit
for modern container workloads, where limits are imposed using cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily
aggressive rcvbuf growth and overshot when the connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC 5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API
----------
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics,
as defined by the OPEN Alliance's "Advanced diagnostic features
for 100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads IPsec
and performs RSS.
- Add info to devlink params whether the current setting is the default
or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame duplication
for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers
--------------
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback
for reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which supports
Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as other
drivers) to avoid wasting resources if feature is unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211 debugfs
interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UoDR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmktzC4ACgkQ6rmadz2v
bTpA1w/+PZ45N3y6O+NQVIpBlpnHG7DEMK7Lw19On0xVLwH+XPHz6J5PEfzjyJR1
SCbsV30qkJ1YCtgRHHf+ZCuWPWm58hY8dXYwSDyjNavdQyVGOdf17aBu9pvH45NW
K20OhwQHpCHWIfDlijjPkDdiHnYf5S7Xy6ctt/3ztF0pMDHIaghGxJymG4wULcDT
iLKnT37kwO8b2ihmw/HbcZPQYMWfHRye7X009K+wCv0dnhJ6q/Ny1m+Pg4kF92e6
ON/RY26ep2dq7LpaNWa1rI1yOgFlI7uUlVojqrAuAb+xrg+64wUDBxeijvE37EN1
s/+PuEKAR6xwz1dbY2cWAI0D633saz24UdV6kCBW9HrjHKVRQ7ZSsBF9ENkS4DTK
nowx4wOe1ZHc/6YgTktZp9LEn/0YrmQtFxjqEAJiYUgD18FrBrSjmhHpBiL+HghP
sTqy41qDQGoKtg3bRu42Co9wmNeeLsnxT8NQExCmTYQ4ufpdA/VMQux9cBVX3GBq
EchJb465+AcvvCJUiKbnHLxDsHCQz1YYytz3RqyFLgGDFZnHOE0FjwPJmM8I5kkK
gvDB3ZYdO3Halm8BZfZZBnKv5uK7myuAWwqRLgMRanuZcRgmIV1oUP5EP88HdH75
fB20vZSVcfzB17SLyhiM20ivEWodJa9VCLEw9WDOmDoml+33Pks=
=kaCJ
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
Signed-off-by: Nicolas Schier <nsc@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gn4V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io), and
it is also used by the Rust compiler itself. While the amount of code
is substantial, there should not be many updates needed for these
crates, and even if there are, they should not be too big, e.g. +7k
-3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for doctests.
Examples (i.e. doctests) may want to do things like show public items
and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code as
possible (this is part of why running Clippy on doctests is important
for us, e.g. for safety comments, which userspace Rust does not
support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension trait
and a new 'fmt!' macro which replaces the previous 'core' import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' less significant bits of the wrapped
type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>:🆕:<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can be constructed from simple non-constant expressions or,
for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations (with
both their backing type and other 'Bounded's with a compatible
backing type), casts to change the backing type, extending/shrinking
and infallible/fallible conversions from/to primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where appropriate.
The existing fully-featured mutable cursor is renamed to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version in
Linux follows Debian Stable releases, with Debian 13 being the first
one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to contribute
for a few years now, so it is a no-op change in practice.
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=9nM+
-----END PGP SIGNATURE-----
Merge tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>:🆕:<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
-----BEGIN PGP SIGNATURE-----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=FnfO
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
- Use max() instead of max_t() to ease static analysis (David Laight)
- Add Manivannan Sadhasivam as PCI/pwrctrl maintainer (Bartosz Golaszewski)
* pci/misc:
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
PCI: Use max() instead of max_t() to ease static analysis
- Add module support for platform controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)
- Add DT binding and driver for CIX Sky1 (Hans Zhang)
* pci/controller/sky1:
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
PCI: cadence: Move PCIe RP common functions to a separate file
PCI: cadence: Split PCIe controller header file
PCI: cadence: Add module support for platform controller driver
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules that
are imported by multiple programs. These modules have been pulled
together under tools/lib/python/ -- at least, for documentation-related
programs. There is other Python code in the tree that might eventually
want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer used by
default, and nobody has missed it, least of all anybody who actually had
to look at it.
- The docs build was controlled by a complex mess of makefilese that few
dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will be far
easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an end to
the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmkuHzEACgkQF0NaE2wM
flgiqAf/aFUA3zCMvOSjbOpX8EO/4rs0ISkhhb01rLSMsRs3P+v9SlGVJls734BE
0ZvVmBo0p7mNakZD4tFCryFn8Gntn28smCEmpDu/FRDMOEcXFUqxQ9st9OhRlar2
tETdFIKIF+yncFJ83Mjr7F5Yeqg38m82g5JdTxvh6FmvDhPLiSXDEeBV2L7hU+St
EX8D8KOZH74XM8LMr8eg3GbUXx72A7WELndlF7DfGIAC8rFC3C9wa0CUSx8wz2Zh
CoCOYsrmd7WdB+c30SUmQbtYLVyWraiqVQVUlCdZDeYPBT/mTo6zJI5L0WxgXuHz
6o+fQdfLA7zlMHTelVcM6y4Qwkmayg==
=1TPY
-----END PGP SIGNATURE-----
Merge tag 'docs-6.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
API:
- Rewrite memcpy_sglist from scratch.
- Add on-stack AEAD request allocation.
- Fix partial block processing in ahash.
Algorithms:
- Remove ansi_cprng.
- Remove tcrypt tests for poly1305.
- Fix EINPROGRESS processing in authenc.
- Fix double-free in zstd.
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng.
- Add support for PCI device 0x115A to ccp.
- Add support of paes in caam.
- Add support for aes-xts in dthev2.
Others:
- Use likely in rhashtable lookup.
- Fix lockdep false-positive in padata by removing a helper.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmktaHwACgkQxycdCkmx
i6duthAAl4ZjsuSgt0P9ZPJXWgSH+QbNT/6fL1QzLEuzLVGn8Mt99LTQpaYU8HRh
fced8+R7UpqA/FgZTYbRKopZJVJJqhmTf2zqjbe47CroRm2Wf5UO+6ZXBsiqbMwa
6fNLilhcrq5G3DrIHepCpIQ7NM2+ucTMnPRIWP3cvzLwX0JzPtYIpYUSiVPAtkjh
9g24oPz6LR/xZfyk+wPbHOSYeqz4sSXnGJkL+Vn33AtU5KJZLum9zMP4Lleim7HP
XaNnUL/S/PYCspycrvfrnq6+YMLPw2USguttuZe0Dg0qhq/jPMyzdEkTAjcTD5LG
NZavVUbQsf6BW+YjXgaE/ybcSs6WR3ySs8aza1Ev8QqsmpbJj9xdpF9fn4RsffGR
mbhc5plJCKWzfiaparea8yY9n5vHwbOK4zoyF9P6kI5ykkoA+GmwRwTW73M9KCfa
i1R6g97O+t4Yaq9JI9GG7dkm9bxJpY+XaKouW7rqv/MX0iND1ExDYaqdcA+Xa61c
TNfdlVcGyX7Dolm2xnpvRv8EqF9NzeK4Vw1QslrdCijXfe7eJymabNKhLBlV4li0
tVfmh4vyQFgruyiR7r7AkXIKzsLZbji030UoOsQqiMW7ualBUQ0dCDbBa8J6kUcX
/vjbSmxV3LKgVgYvUBRRGIi9CJbKfs29RkS6RFtdqcq/YT4KsJU=
=DHes
-----END PGP SIGNATURE-----
Merge tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the cpufreq
core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat Lake
processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate cpufreq
driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking in
it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi, Hal
Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out
of drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkp0BYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1Pc8H/2G5d0aD/ym1a8MDTpKqn7t3/rVMHa76
YGfxXMBr1oY++r5GTJTKBxZBHmF89VH71kdyvsMidTAtHjR+iZAS1ajd2Q5VYjOF
QNMld1qgPEzAZU8WSetDrBqMr89zls05Uubo4aCoNy6rFmgRaLHh3AmIKSS9aJuo
C1eH8dRONME5I/rafkOUpFs1+/Agq1vePwPZmwVnZX9A3qI+UOhMRdU9A37kYkx9
YwfQvR2fKTIPjZ6B9f/wGXPOvdrT37d4+dWT3EABOHMkxlpAPDMvmVzZsUaXSQMr
0d9NGEjPGo33qciKJJpHqNOdDOhi90606WBBf7aaMF+GMhDX3PznOK4=
=rzXO
-----END PGP SIGNATURE-----
Merge tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support for
NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections
-----BEGIN PGP SIGNATURE-----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=4Sb6
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
Manivannan is doing a lot of work on the PCI power control. Add him as
maintainer.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251120082747.10541-1-brgl@bgdev.pl
Linus Torvalds