VFIO EEH recovery for PCI passthrough devices fails on PowerNV and pseries
platforms due to missing host-side PE bridge reconfiguration. In the
current implementation, eeh_pe_configure() only performs RTAS or OPAL-based
bridge reconfiguration for native host devices, but skips it entirely for
PEs managed through VFIO in guest passthrough scenarios.
This leads to incomplete EEH recovery when a PCI error affects a
passthrough device assigned to a QEMU/KVM guest. Although VFIO triggers the
EEH recovery flow through VFIO_EEH_PE_ENABLE ioctl, the platform-specific
bridge reconfiguration step is silently bypassed. As a result, the PE's
config space is not fully restored, causing subsequent config space access
failures or EEH freeze-on-access errors inside the guest.
This patch fixes the issue by ensuring that eeh_pe_configure() always
invokes the platform's configure_bridge() callback (e.g.,
pseries_eeh_phb_configure_bridge) even for VFIO-managed PEs. This ensures
that RTAS or OPAL calls to reconfigure the PE bridge are correctly issued
on the host side, restoring the PE's configuration space after an EEH
event.
This fix is essential for reliable EEH recovery in QEMU/KVM guests using
VFIO PCI passthrough on PowerNV and pseries systems.
Tested with:
- QEMU/KVM guest using VFIO passthrough (IBM Power9,(lpar)Power11 host)
- Injected EEH errors with pseries EEH errinjct tool on host, recovery
verified on qemu guest.
- Verified successful config space access and CAP_EXP DevCtl restoration
after recovery
Fixes: 212d16cdca ("powerpc/eeh: EEH support for VFIO PCI device")
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250508062928.146043-1-nnmlinux@linux.ibm.com
Building vdso32 on power10 with pcrel leads to following errors:
VDSO32A arch/powerpc/kernel/vdso/gettimeofday-32.o
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: syntax error; found `@', expected `,'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
arch/powerpc/kernel/vdso/gettimeofday.S:40: Error: junk at end of line: `@notoc'
arch/powerpc/kernel/vdso/gettimeofday.S:71: Info: macro invoked from here
...
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/gettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
Once the above is fixed, the following happens:
VDSO32C arch/powerpc/kernel/vdso/vgettimeofday-32.o
cc1: error: '-mpcrel' requires '-mcmodel=medium'
make[2]: *** [arch/powerpc/kernel/vdso/Makefile:89: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1
make[1]: *** [arch/powerpc/Makefile:388: vdso_prepare] Error 2
make: *** [Makefile:251: __sub-make] Error 2
Make sure pcrel version of CFUNC() macro is used only for powerpc64
builds and remove -mpcrel for powerpc32 builds.
Fixes: 7e3a68be42 ("powerpc/64: vmlinux support building with PCREL addresing")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1fa3453f07d42a50a70114da9905bf7b73304fca.1747073669.git.christophe.leroy@csgroup.eu
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a
symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
-----BEGIN PGP SIGNATURE-----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=Dy49
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to: Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby (SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy, Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav Jain, Venkat Rao Bagalkote, Viktor Malik
-----BEGIN PGP SIGNATURE-----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=dsj5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Support for dynamic preemption
- Migrate powerpc boards GPIO driver to new setter API
- Added new PMU for KVM host-wide measurement
- Enhancement to htmdump driver to support more functions
- Added character device for couple RTAS supported APIs
- Minor fixes and cleanup
Thanks to Amit Machhiwal, Athira Rajeev, Bagas Sanjaya, Bartosz
Golaszewski, Christophe Leroy, Eddie James, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Jiri Slaby
(SUSE), Linus Walleij, Michal Suchanek, Naveen N Rao (AMD), Nilay
Shroff, Ricardo B. Marlière, Ritesh Harjani (IBM), Sathvika Vasireddy,
Shrikanth Hegde, Stephen Rothwell, Sourabh Jain, Thorsten Blum, Vaibhav
Jain, Venkat Rao Bagalkote, and Viktor Malik.
* tag 'powerpc-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (52 commits)
MAINTAINERS: powerpc: Remove myself as a reviewer
powerpc/iommu: Use str_disabled_enabled() helper
powerpc/powermac: Use str_enabled_disabled() and str_on_off() helpers
powerpc/mm/fault: Use str_write_read() helper function
powerpc: Replace strcpy() with strscpy() in proc_ppc64_init()
powerpc/pseries/iommu: Fix kmemleak in TCE table userspace view
powerpc/kernel: Fix ppc_save_regs inclusion in build
powerpc: Transliterate author name and remove FIXME
powerpc/pseries/htmdump: Include header file to get is_kvm_guest() definition
KVM: PPC: Book3S HV: Fix IRQ map warnings with XICS on pSeries KVM Guest
powerpc/8xx: Reduce alignment constraint for kernel memory
powerpc/boot: Fix build with gcc 15
powerpc/pseries/htmdump: Add documentation for H_HTM debugfs interface
powerpc/pseries/htmdump: Add htm capabilities support to htmdump module
powerpc/pseries/htmdump: Add htm flags support to htmdump module
powerpc/pseries/htmdump: Add htm setup support to htmdump module
powerpc/pseries/htmdump: Add htm info support to htmdump module
powerpc/pseries/htmdump: Add htm status support to htmdump module
powerpc/pseries/htmdump: Add htm start support to htmdump module
powerpc/pseries/htmdump: Add htm configure support to htmdump module
...
Recent patch fixed an old commit
'fc2a5a6161a2 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")'
which is to include building of ppc_save_reg.c only when XMON
and KEXEC_CORE and PPC_BOOK3S are enabled. This was valid, since
ppc_save_regs was called only in replay_system_reset() of old
irq.c which was under BOOK3S.
But there has been multiple refactoring of irq.c and have
added call to ppc_save_regs() from __replay_soft_interrupts
-> replay_soft_interrupts which is part of irq_64.c included
under CONFIG_PPC64. And since ppc_save_regs is called in
CRASH_DUMP path as part of crash_setup_regs in kexec.h,
CONFIG_PPC32 also needs it.
So with this recent patch which enabled the building of
ppc_save_regs.c caused a build break when none of these
(XMON, KEXEC_CORE, BOOK3S) where enabled as part of config.
Patch to enable building of ppc_save_regs.c by defaults.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250511041111.841158-1-maddy@linux.ibm.com
The Fixes commit below tried to add CONFIG_PPC_BOOK3S to one of the
conditions to enable the build of ppc_save_regs.o. But it failed to do
so, in fact. The commit omitted to add a dollar sign.
Therefore, ppc_save_regs.o is built always these days (as
"(CONFIG_PPC_BOOK3S)" is never an empty string).
Fix this by adding the missing dollar sign.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: fc2a5a6161 ("powerpc/64s: ppc_save_regs is now needed for all 64s builds")
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250417105305.397128-1-jirislaby@kernel.org
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
The RTAS call ibm,get-indices is used to obtain indices and
location codes for a specified indicator or sensor token. The
current implementation uses rtas_get_indices() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But writable mapping /dev/mem access by
the user space is prohibited under system lockdown.
To overcome the restricted access in the user space, the kernel
provide interfaces to collect indices data from the hypervisor.
This patch adds papr-indices character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (2.13 7.3.17 ibm,get-indices RTAS Call) describes the
following steps to retrieve all indices data:
- User input parameters to the RTAS call: sensor or indicator,
and indice type
- ibm,get-indices is sequence RTAS call which means has to issue
multiple times to get the entire list of indicators or sensors
of a particular type. The hypervisor expects the first RTAS call
with the sequence 1 and the subsequent calls with the sequence
number returned from the previous calls.
- The OS may not interleave calls to ibm,get-indices for different
indicator or sensor types. Means other RTAS calls with different
type should not be issued while the previous type sequence is in
progress. So collect the entire list of indices and copied to
buffer BLOB during ioctl() and expose this buffer to the user
space with the file descriptor.
- The hypervisor fills the work area with a specific format but
does not return the number of bytes written to the buffer.
Instead of parsing the data for each call to determine the data
length, copy the work area size (RTAS_GET_INDICES_BUF_SIZE) to
the buffer. Return work-area size of data to the user space for
each read() call.
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int devfd = open("/dev/papr-indices", O_RDONLY);
int fd = ioctl(devfd, PAPR_INDICES_IOC_GET,
struct papr_indices_io_block)
- Collect all indices data for the specified token to the buffer
char *buf = malloc(RTAS_GET_INDICES_BUF_SIZE);
length = read(fd, buf, RTAS_GET_INDICES_BUF_SIZE)
- RTAS_GET_INDICES_BUF_SIZE of data is returned to the user
space.
- The user space retrieves the indices and their location codes
from the buffer
- Should issue multiple read() calls until reaches the end of
BLOB buffer.
The read() should use the file descriptor obtained from ioctl to
get the data that is exposed to file descriptor. Implemented
support in librtas (rtas_get_indices()) for this new ABI for
system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-4-haren@linux.ibm.com
Once the lazy preemption is supported, it would be desirable to change
the preemption models at runtime. So add support for dynamic preemption
using DYNAMIC_KEY.
::Tested lightly on Power10 LPAR
Performance numbers indicate that, preempt=none(no dynamic) and
preempt=none(dynamic) are close.
cat /sys/kernel/debug/sched/preempt
(none) voluntary full lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
1,253 probe:__cond_resched
echo full > /sys/kernel/debug/sched/preempt
cat /sys/kernel/debug/sched/preempt
none voluntary (full) lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
0 probe:__cond_resched
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210184334.567383-2-sshegde@linux.ibm.com
get_stubs_size assumes that there must always be at least one patchable
function entry, which is not always the case (modules that export data
but no code), otherwise it returns -ENOEXEC and thus the section header
sh_size is set to that value. During module_memory_alloc() the size is
passed to execmem_alloc() after being page-aligned and thus set to zero
which will cause it to fail the allocation (and thus module loading) as
__vmalloc_node_range() checks for zero-sized allocs and returns null:
[ 115.466896] module_64: cast_common: doesn't contain __patchable_function_entries.
[ 115.469189] ------------[ cut here ]------------
[ 115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0
...
[ 115.478574] ---[ end trace 0000000000000000 ]---
[ 115.479545] execmem: unable to allocate memory
Fix this by removing the check completely, since it is anyway not
helpful to propagate this as an error upwards.
Fixes: eec37961a5 ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250204231821.39140-1-ailiop@suse.com
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable()
in the module code and its users has been replaced with just
rcu_read_lock().
- The rest of changes are smaller fixes and updates.
The changes have been on linux-next for at least 2 weeks, with the RCU
cleanup present for 2 months. One performance problem was reported with the
RCU change when KASAN + lockdep were enabled, but it was effectively
addressed by the already merged ee57ab5a32 ("locking/lockdep: Disable
KASAN instrumentation of lockdep.c").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEIduBR9MnFA82q/jtumpXJwqY6poFAmfmwrsUHHBldHIucGF2
bHVAc3VzZS5jb20ACgkQumpXJwqY6prWxgf/S7Pvdywm10vJ6fooYa+GxXNMwhyh
XRjZ4m9gjeTNf2KLwX0XHv0XZeFHOmHfjd3iI+pS6CXZnCFTN9J3XPLYsrTxXUb6
U6zzLf8Zsz8TzeI4dgvSBsZln7oICSACkAgdJCq23hpNKeaeRo91dgiZaIwyZJG3
FekqSFtP7pYhfFoNkrFKysqbgl1+RWWZ79L2qRJA0bPzVFlvRUuh6cOHQw+8RMqf
BYLwnArjTkW8AcXpxIXSiwphDHVZ81B96xoplavyoprA5FDpv1W+8y4DtxdWFn+1
QVWCs/ZV3KrwXWpZev625w3fIOOIXILqRINOzLfvXTw+1xFS3TzSQEpVeg==
=4OKc
-----END PGP SIGNATURE-----
Merge tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Use RCU instead of RCU-sched
The mix of rcu_read_lock(), rcu_read_lock_sched() and
preempt_disable() in the module code and its users has
been replaced with just rcu_read_lock()
- The rest of changes are smaller fixes and updates
* tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits)
MAINTAINERS: Update the MODULE SUPPORT section
module: Remove unnecessary size argument when calling strscpy()
module: Replace deprecated strncpy() with strscpy()
params: Annotate struct module_param_attrs with __counted_by()
bug: Use RCU instead RCU-sched to protect module_bug_list.
static_call: Use RCU in all users of __module_text_address().
kprobes: Use RCU in all users of __module_text_address().
bpf: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_text_address().
jump_label: Use RCU in all users of __module_address().
x86: Use RCU in all users of __module_address().
cfi: Use RCU while invoking __module_address().
powerpc/ftrace: Use RCU in all users of __module_text_address().
LoongArch: ftrace: Use RCU in all users of __module_text_address().
LoongArch/orc: Use RCU in all users of __module_address().
arm64: module: Use RCU in all users of __module_text_address().
ARM: module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_text_address().
module: Use RCU in all users of __module_address().
module: Use RCU in search_module_extables().
...
- Removal of support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav
Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar,
Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy,
Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----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=GFcj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
[ Merge note, these two commits are identical:
- f3fa0e40df ("sched/clock: Don't define sched_clock_irqtime as static key")
- b9f2b29b94 ("sched: Don't define sched_clock_irqtime as static key")
The first one is a cherry-picked version of the second, and the first one
is already upstream. ]
Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli,
Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SuQE
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
- avoid the lock trip seccomp_filter_release in common case (Mateusz Guzik)
- remove unused 'sd' argument through-out (Oleg Nesterov)
- selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJKgAKCRA2KwveOeQk
u3UDAQCUPSJ+iNGEsh9ErHJZWmg+LQJ999fOVrWWz+onjXFoQgD/cEHyLtSnz1Oa
RbdGEqkBkRTXgOdkcIW5pJ4lBtfIpQQ=
=z/8H
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- avoid the lock trip seccomp_filter_release in common case (Mateusz
Guzik)
- remove unused 'sd' argument through-out (Oleg Nesterov)
- selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
* tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: avoid the lock trip seccomp_filter_release in common case
seccomp: remove the 'sd' argument from __seccomp_filter()
seccomp: remove the 'sd' argument from __secure_computing()
seccomp: fix the __secure_computing() stub for !HAVE_ARCH_SECCOMP_FILTER
seccomp/mips: change syscall_trace_enter() to use secure_computing()
selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
- elf: Define and use note name macros (Akihiko Odaki)
- elf: add remaining SHF_ flag macros (Timur Tabi)
- binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt)
- binfmt_elf_fdpic: fix variable set but not used warning (sunliming)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJxQAKCRA2KwveOeQk
uwhAAP9WXP77FCfAvJkmOfDI5FSa6g2WH/BnUOtZW63lSoXnTAEAuttg8W1IKcl/
Db+R/RLS3QqrU+ib5xWBeA6ZvxZXCwA=
=Svn4
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- elf: Define and use note name macros (Akihiko Odaki)
- elf: add remaining SHF_ flag macros (Timur Tabi)
- binfmt: Remove loader from linux_binprm struct (Yonatan Goldschmidt)
- binfmt_elf_fdpic: fix variable set but not used warning (sunliming)
* tag 'execve-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf_fdpic: fix variable set but not used warning
elf: add remaining SHF_ flag macros
binfmt: Remove loader from linux_binprm struct
crash: Remove KEXEC_CORE_NOTE_NAME
s390/crash: Use note name macros
crash: Use note name macros
powerpc/crash: Use note name macros
binfmt_elf: Use note name macros
elf: Define note name macros
max_mapnr is essentially the size of the memory map for systems that use
FLATMEM. There is no reason to calculate it in each and every architecture
when it's anyway calculated in alloc_node_mem_map().
Drop setting of max_mapnr from architecture code and set it once in
alloc_node_mem_map().
While on it, move definition of mem_map and max_mapnr to mm/mm_init.c so
there won't be two copies for MMU and !MMU variants.
Link: https://lkml.kernel.org/r/20250313135003.836600-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> [x86]
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Guo Ren (csky) <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After the first printk in __die() there is show_regs() ->
show_regs_print_info() which prints the current
preemption model.
Remove the preempion model from the arch code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-6-bigeasy@linutronix.de
Commit 0ab97169aa ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Along with moving to the generic crashkernel reservation, the code related
to finding the base address for the crashkernel has been separated into
its own function name get_crash_base() for better readability and
maintainability.
Link: https://lkml.kernel.org/r/20250131113830.925179-8-sourabhjain@linux.ibm.com
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Baoquan he <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__module_text_address() can be invoked within a RCU section, there is no
requirement to have preemption disabled.
Replace the preempt_disable() section around __module_text_address()
with RCU.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250108090457.512198-21-bigeasy@linutronix.de
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The following build warning have been reported:
arch/powerpc/kvm/book3s_hv_rmhandlers.o: warning: objtool: .text+0xe84: intra_function_call not a direct call
arch/powerpc/kernel/switch.o: warning: objtool: .text+0x4: intra_function_call not a direct call
This happens due to commit bb7f054f4d ("objtool/powerpc: Add support
for decoding all types of uncond branches") because that commit decodes
'bl .+4' as a normal instruction because that instruction is used by
clang instead of 'bcl 20,31,+.4' for relocatable code.
The solution is simply to remove the ANNOTATE_INTRA_FUNCTION_CALL
annotation now that the instruction is not seen as a function call
anymore.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/8c4c3fc2-2bd7-4148-af68-2f504d6119e0@linux.ibm.com
Fixes: bb7f054f4d ("objtool/powerpc: Add support for decoding all types of uncond branches")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-By: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/88876fb4e412203452e57d1037a1341cf15ccc7b.1741128981.git.christophe.leroy@csgroup.eu
Similar to the PowerMac3,1, the PowerBook6,7 is missing the #size-cells
property on the i2s node.
Depends-on: commit 045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells handling")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
[maddy: added "commit" work in depends-on to avoid checkpatch error]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/875xmizl6a.fsf@igel.home
The IBM Cell blade support was the last user of UDBG_RTAS_CONSOLE.
Although it's still possible to build it via
PPC_EARLY_DEBUG_UDBG_RTAS_CONSOLE, AFAIK it's not useful on any
other platfoms, because only Cell and JS20 era machines provided the
RTAS get/put-term-char functions.
If anyone is using it or needs it we can always resurrect it from git.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-19-mpe@ellerman.id.au
The Cell blade support was the last user of PPC_INDIRECT_MMIO, so it can
now be removed.
PPC_INDIRECT_PIO is still used by Power8 powernv, so it needs to remain.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-10-mpe@ellerman.id.au
The Cell blade support was the last user of PPC_IO_WORKAROUNDS, so they
can now be removed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-9-mpe@ellerman.id.au
Now that CONFIG_PPC_CELL_NATIVE is removed, iommu_fixed_is_weak will
always be false, so remove it entirely.
Also remove a hack/quirk in the HTAB code that was only used on Cell.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-2-mpe@ellerman.id.au
IBM Cell Blades used the Cell processor and the "blade" server form
factor. They were sold as models QS20, QS21 & QS22 from roughly 2006 to
2012 [1]. They were used in a few supercomputers (eg. Roadrunner) that
have since been dismantled, and were not that widely used otherwise.
Until recently I still had a working QS22, which meant I was able to
keep the platform support working, but unfortunately that machine has
now died.
I'm not aware of any users. If there is a user that wants to keep the
upstream support working, we can look at bringing some of the code back
as appropriate.
See previous discussion at [2].
Remove the top-level config symbol PPC_IBM_CELL_BLADE, and then
the dependent symbols PPC_CELL_NATIVE, PPC_CELL_COMMON, CBE_RAS,
PPC_IBM_CELL_RESETBUTTON, PPC_IBM_CELL_POWERBUTTON, CBE_THERM, and
AXON_MSI. Then remove the associated C files and headers, and trim
unused header content (some is shared with PS3).
Note that PPC_CELL_COMMON sounds like it would build code shared with
PS3, but it does not. It's a relic from when code was shared between the
Blade support and QPACE support.
Most of the primary authors already have CREDITS entries, with the
exception of Christian, so add one for him.
[1]: https://www.theregister.com/2011/06/28/ibm_kills_qs22_blade
[2]: https://lore.kernel.org/linuxppc-dev/60581044-df82-40ad-b94c-56468007a93e@app.fastmail.com
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-1-mpe@ellerman.id.au
Implement inline static calls:
- Put a 'bl' to the destination function ('b' if tail call)
- Put a 'nop' when the destination function is NULL ('blr' if tail call)
- Put a 'li r3,0' when the destination is the RET0 function and not
a tail call.
If the destination is too far (over the 32Mb limit), go via the
trampoline.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/3dbd0b2ba577c942729235d0211d04a406653d81.1733245362.git.christophe.leroy@csgroup.eu
Reorganise arch_static_call_transform() in order to ease the support
of inline static calls in following patch:
- remove 'target' to nhide whether it is a 'return 0' or not.
- Don't bail out if 'tramp' is NULL, just do nothing until next patch.
Note that 'target' was 'tramp + PPC_SCT_RET0', is_short was perforce
true. So in the 'if (func && !is_short)' leg, target was perforce
equal to 'func'.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/7a8b9245e773307c315c2548a4c6cad570ac2648.1733245362.git.christophe.leroy@csgroup.eu
The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-14-13a4669dfc8c@linutronix.de
As the Makefile is included into other Makefiles it can not be used to
define objects to be built from the current source directory.
However the generic datastore will introduce such a local source file.
Rename the included Makefile so it is clear how it is to be used and to
make room for a regular Makefile in lib/vdso/.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-4-13a4669dfc8c@linutronix.de
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-powerpc-v1-2-bbed8906f476@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Narayana Murty N