After commit aa7a9275ab ("PM: sleep: Suspend async parents after
suspending children"), the following scenario is possible:
1. Device A is async and it depends on device B that is sync.
2. Async suspend is scheduled for A before the processing of B is
started.
3. A is waiting for B.
4. In the meantime, an unrelated device fails to suspend and returns
an error.
5. The processing of B doesn't start at all and its power.completion is
not updated.
6. A is still waiting for B when async_synchronize_full() is called.
7. Deadlock ensues.
To prevent this from happening, update power.completion for all devices
on errors in all suspend phases, but do not do it directly for devices
that are already being processed or are waiting for the processing to
start because in those cases it may be necessary to wait for the
processing to actually complete before updating power.completion for
the device.
Fixes: aa7a9275ab ("PM: sleep: Suspend async parents after suspending children")
Fixes: 443046d1ad ("PM: sleep: Make suspend of devices more asynchronous")
Closes: https://lore.kernel.org/linux-pm/e13740a0-88f3-4a6f-920f-15805071a7d6@linaro.org/
Reported-and-tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6191258.lOV4Wx5bFT@rjwysocki.net
Commit 12ffc3b151 ("PM: Restrict swap use to later in the suspend
sequence") changed two pm_restore_gfp_mask() calls in enter_state()
and hibernation_restore() into one pm_restore_gfp_mask() call in
dpm_resume_end(), but it put that call before the dpm_resume()
invocation which is too early (some swap-backing devices may not be
ready at that point).
Moreover, this code ordering change was not even mentioned in the
changelog of the commit mentioned above.
Address this by moving that call after the dpm_resume() one.
Fixes: 12ffc3b151 ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2797018.mvXUDI8C0e@rjwysocki.net
Currently swap is restricted before drivers have had a chance to do
their prepare() PM callbacks. Restricting swap this early means that if
a driver needs to evict some content from memory into sawp in it's
prepare callback, it won't be able to.
On AMD dGPUs this can lead to failed suspends under memory pressure
situations as all VRAM must be evicted to system memory or swap.
Move the swap restriction to right after all devices have had a chance
to do the prepare() callback. If there is any problem with the sequence,
restore swap in the appropriate dpm resume callbacks or error handling
paths.
Closes: https://github.com/ROCm/ROCK-Kernel-Driver/issues/174
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2362
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Nat Wittstock <nat@fardog.io>
Tested-by: Lucian Langa <lucilanga@7pot.org>
Link: https://patch.msgid.link/20250613214413.4127087-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Commit 0cbef962ce ("PM: sleep: Resume children after resuming the
parent") introduced a subtle concurrency issue that may lead to a kernel
crash if system suspend is aborted and may also slow down asynchronous
device resume otherwise.
Namely, the initial list walks in dpm_noirq_resume_devices(),
dpm_resume_early(), and dpm_resume() call dpm_clear_async_state() for
every device and attempt to asynchronously resume it if it has no
children (so it is a "root" device). The asynchronous resume of a
root device triggers an attempt to asynchronously resume its children
which may take place before calling dpm_clear_async_state() for them
due to the lack of synchronization between dpm_async_resume_children()
and the code calling dpm_clear_async_state(). If this happens, the
dpm_clear_async_state() that comes in late, will clear
power.work_in_progress for the given device after it has been set by
__dpm_async(), so the suspend callback will be allowed to run once
again for the same device during the same transition. This leads to
a whole range of interesting breakage.
Fortunately, if the suspend transition is not aborted, power.work_in_progress
is set by it for all devices, so dpm_async_resume_children() will not
schedule asynchronous resume for them until dpm_clear_async_state()
clears that flag, but this means missing an opportunity to start the
resume of those devices earlier.
Address the above issue by adding dpm_list_mtx locking to
dpm_async_resume_children(), so it will wait for the entire initial
list walk and the invocation of dpm_clear_async_state() for all devices
to be completed before scheduling any new asynchronous resume callbacks.
Fixes: 0cbef962ce ("PM: sleep: Resume children after resuming the parent")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/13779172.uLZWGnKmhe@rjwysocki.net
Commit 03f1444016 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016 ("PM: sleep: Fix handling devices with direct_complete set on errors")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net
Commits aa7a9275ab ("PM: sleep: Suspend async parents after suspending
children") and 443046d1ad ("PM: sleep: Make suspend of devices more
asynchronous") added list splicing to the error paths of dpm_suspend(),
dpm_suspend_late(), and dpm_noirq_suspend_devices(), but they should
have used the list_splice_init() variant because the emptied list is
used going forward in all of these cases.
Replace list_splice() with list_splice_init() in the code in question as
appropriate.
Fixes: aa7a9275ab ("PM: sleep: Suspend async parents after suspending children")
Fixes: 443046d1ad ("PM: sleep: Make suspend of devices more asynchronous")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4280
Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4659282.LvFx2qVVIh@rjwysocki.net
Here are the driver core / kernfs changes for 6.16-rc1.
Not a huge number of changes this development cycle, here's the summary
of what is included in here:
- kernfs locking tweaks, pushing some global locks down into a per-fs
image lock
- rust driver core and pci device bindings added for new features.
- sysfs const work for bin_attributes. This churn should now be
completed for those types of attributes
- auxbus device creation helpers added
- fauxbus fix for creating sysfs files after the probe completed
properly
- other tiny updates for driver core things.
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaDbe+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYbACgl/MngU9pRnx5jZIQh6bWveFSeo8AnRE4U5x0
X+lgTPjGKL1RrV3C5HJp
=+0BA
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Greg KH:
"Here are the driver core / kernfs changes for 6.16-rc1.
Not a huge number of changes this development cycle, here's the
summary of what is included in here:
- kernfs locking tweaks, pushing some global locks down into a per-fs
image lock
- rust driver core and pci device bindings added for new features.
- sysfs const work for bin_attributes.
The final churn of switching away from and removing the
transitional struct members, "read_new", "write_new" and
"bin_attrs_new" will come after the merge window to avoid
unnecesary merge conflicts.
- auxbus device creation helpers added
- fauxbus fix for creating sysfs files after the probe completed
properly
- other tiny updates for driver core things.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
kernfs: Relax constraint in draining guard
Documentation: embargoed-hardware-issues.rst: Remove myself
drivers: hv: fix up const issue with vmbus_chan_bin_attrs
firmware_loader: use SHA-256 library API instead of crypto_shash API
docs: debugfs: do not recommend debugfs_remove_recursive
PM: wakeup: Do not expose 4 device wakeup source APIs
kernfs: switch global kernfs_rename_lock to per-fs lock
kernfs: switch global kernfs_idr_lock to per-fs lock
driver core: auxiliary bus: Fix IS_ERR() vs NULL mixup in __devm_auxiliary_device_create()
sysfs: constify attribute_group::bin_attrs
sysfs: constify bin_attribute argument of bin_attribute::read/write()
software node: Correct a OOB check in software_node_get_reference_args()
devres: simplify devm_kstrdup() using devm_kmemdup()
platform: replace magic number with macro PLATFORM_DEVID_NONE
component: do not try to unbind unbound components
driver core: auxiliary bus: add device creation helpers
driver core: faux: Add sysfs groups after probing
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian).
- Fix typos in energy model documentation and example driver code (Moon
Hee Lee, Atul Kumar Pant).
- Rearrange the energy model management code and add a new function for
adjusting a CPU energy model after adjusting the capacity of the
given CPU to it (Rafael Wysocki).
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- Switch OPP to use kmemdup_array() (Zhang Enpei).
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
menu cpuidle governor (Zhongqiu Han).
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy).
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant).
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1
fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj
RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe
MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv
VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF
MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4=
=dIqJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
This bulk of the changes in this release are driver work, as well as
new device support we have some important work on performance over
several drivers, and big overhauls for maintainability on a couple too.
Highlights include:
- Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of
the NXP FSPI driver from Haibo Chen.
- Performance improvements for the AXI SPI engine.
- Support for writes to memory mapped flashes on Renesas devices.
- Integrated DMA support for Tegra210 QSPI, used by the Tegra234.
- DMA support for Amlogic SPI controllers.
- Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip
RK3528 and Samsung Exynos Autov920.
An update to fix some issues with the Atmel QSPI driver runtime PM
pulled in a new API from the PM core, and the Renesas memory mapped
write changes pull in some code that's shared in drivers/memory.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgzCzkACgkQJNaLcl1U
h9DF5gf+MlaB2j6ggH/OnXdV6aQTcjta357+ptWH3CDQbx0nsMj50i+eqxhzOK69
tyOMX0gcqo8bBQq1mhm3Z2fDYbYYRKwf7OwymHD1KGNGn9zegORNw790/XGTeoMo
m5f9Trz9UNP+7NjWuOioKoy6zghp4Ti2WAAUPhGUQBnyaV269bonNvisRtqnDP5u
nOu1DYANZqL3icuUIdJ3Aklmn4On1svUPuE9HOn/GNocZZWegcCHfBjmSRuLUAGO
RR1jP/d+RfSvTSrdqZGwrfWLFBBirjSLXNB1g7sjiVTnSseuBnOZ/z7PuBQQ+NuB
ENyoQXNLFZKMTQ5wmuQpXnwIIXsxYg==
=FmJ2
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The bulk of the changes in this release are driver work, as well as
new device support we have some important work on performance over
several drivers, and big overhauls for maintainability on a couple
too. Highlights include:
- Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of
the NXP FSPI driver from Haibo Chen
- Performance improvements for the AXI SPI engine
- Support for writes to memory mapped flashes on Renesas devices
- Integrated DMA support for Tegra210 QSPI, used by the Tegra234
- DMA support for Amlogic SPI controllers
- Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip
RK3528 and Samsung Exynos Autov920
An update to fix some issues with the Atmel QSPI driver runtime PM
pulled in a new API from the PM core, and the Renesas memory mapped
write changes pull in some code that's shared in drivers/memory"
* tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
spi: spi-qpic-snand: return early on error from qcom_spi_io_op()
spi: loopback-test: fix up const pointer issue in rx_ranges_cmp()
spi: gpio: fix const issue in spi_to_spi_gpio()
spi: spi-qpic-snand: remove superfluous parameters of qcom_spi_check_error()
dt-bindings: spi: samsung: add exynosautov920-spi compatible
spi: spi-qpic-snand: reuse qcom_spi_check_raw_flash_errors()
spi: dt-bindings: Add rk3528-spi compatible
spi: spi_amd: Update Kconfig dependencies
spi: spi_amd: Add HIDDMA basic write support
spi: spi_amd: Remove read{q,b} usage on DMA buffer
spi: sh-msiof: Move register definitions to <linux/spi/sh_msiof.h>
spi: sh-msiof: Document frame start sync pulse mode
spi: sh-msiof: Double maximum DMA transfer size using two groups
spi: sh-msiof: Simplify BRG's Division Ratio
spi: sh-msiof: Increase TX FIFO size for R-Car V4H/V4M
spi: sh-msiof: Correct RX FIFO size for R-Car Gen3
spi: sh-msiof: Correct RX FIFO size for R-Car Gen2
spi: sh-msiof: Add core support for dual-group transfers
spi: sh-msiof: Correct SIMDR2_GRPMASK
spi: sh-msiof: SIFCTR bitfield conversion
...
Merge updates related to system sleep handling and runtime PM for 6.16-rc1:
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
* pm-runtime:
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
PM: runtime: Add new devm functions
* pm-sleep:
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: sleep: Introduce pm_sleep_transition_in_progress()
PM: sleep: Introduce pm_suspend_in_progress()
PM: sleep: Print PM debug messages during hibernation
ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
PM: hibernate: add configurable delay for pm_test
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
PM: wakeup: Add missing wakeup source attribute relax_count
PM: sleep: Remove unnecessary !!
PM: sleep: Use two lines for "Restarting..." / "done" messages
PM: sleep: Make suspend of devices more asynchronous
PM: sleep: Suspend async parents after suspending children
PM: sleep: Resume children after resuming the parent
PM: hibernate: Remove size arguments when calling strscpy()
pm_runtime_put_autosuspend() schedules a hrtimer to expire
at "dev->power.timer_expires". If the hrtimer's callback,
pm_suspend_timer_fn(), observes that the current time equals
"dev->power.timer_expires", it unexpectedly bails out instead of
proceeding with runtime suspend.
pm_suspend_timer_fn():
if (expires > 0 && expires < ktime_get_mono_fast_ns()) {
dev->power.timer_expires = 0;
rpm_suspend(..)
}
Additionally, as ->timer_expires is not cleared, all the future auto
suspend requests will not schedule hrtimer to perform auto suspend.
rpm_suspend():
if ((rpmflags & RPM_AUTO) &&...) {
if (!(dev->power.timer_expires && ...) { <-- this will fail.
hrtimer_start_range_ns(&dev->power.suspend_timer,...);
}
}
Fix this by as well checking if current time reaches the set expiration.
Co-developed-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Patrick Daly <quic_pdaly@quicinc.com>
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Link: https://patch.msgid.link/20250515064125.1211561-1-quic_charante@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "suspend in progress" check in device_wakeup_enable() does not
cover hibernation, but arguably it should do that, so introduce
pm_sleep_transition_in_progress() covering transitions during both
system suspend and hibernation to use in there and use it also in
pm_debug_messages_should_print().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/7820474.EvYhyI6sBW@rjwysocki.net
[ rjw: Move the new function definition under CONFIG_PM_SLEEP ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
Some of the debug sysfs attributes for runtime PM are located
in the power_attrs[] table, so they are exposed even in the
pm_runtime_has_no_callbacks() case, unlike the other non-debug
sysfs attributes for runtime PM, which may be confusing.
Moreover, dev_attr_runtime_status.attr appears in two
places, which effectively causes it to be always exposed if
CONFIG_PM_ADVANCED_DEBUG is set, but otherwise it is exposed
only when pm_runtime_has_no_callbacks() returns 'false'.
Address this by putting all sysfs attributes for runtime PM into
runtime_attrs[].
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12677254.O9o76ZdvQC@rjwysocki.net
There is wakeup source attribute 'active_count', but its counterpart
attribute 'relax_count' is missing.
Add 'relax_count' for consistency.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://patch.msgid.link/20250505-add_power_attrs-v1-1-10bc3c73c320@quicinc.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add `devm_pm_runtime_set_active_enabled()` and
`devm_pm_runtime_get_noresume()` for simplifying
common cases in drivers.
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250327195928.680771-3-csokas.bence@prolan.hu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The following 4 APIs are only used by drivers/base/power/wakeup.c
internally.
- wakeup_source_create()
- wakeup_source_destroy()
- wakeup_source_add()
- wakeup_source_remove()
Do not expose them by making them as static functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250420-fix_power-v2-1-9b938d2283aa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In analogy with previous changes, make device_suspend_late() and
device_suspend_noirq() start the async suspend of the device's parent
after the device itself has been processed and make dpm_suspend_late()
and dpm_noirq_suspend_devices() start processing "async" leaf devices
(that is, devices without children) upfront so they don't need to wait
for the other devices they don't depend on.
This change reduces the total duration of device suspend on some systems
measurably, but not significantly.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1924195.CQOukoFCf9@rjwysocki.net
In analogy with the previous change affecting the resume path,
make device_suspend() start the async suspend of the device's parent
after the device itself has been processed and make dpm_suspend() start
processing "async" leaf devices (that is, devices without children)
upfront so they don't need to wait for the "sync" devices they don't
depend on.
On the Dell XPS13 9360 in my office, this change reduces the total
duration of device suspend by approximately 100 ms (over 20%).
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3541233.QJadu78ljV@rjwysocki.net
According to [1], the handling of device suspend and resume, and
particularly the latter, involves unnecessary overhead related to
starting new async work items for devices that cannot make progress
right away because they have to wait for other devices.
To reduce this problem in the resume path, use the observation that
starting the async resume of the children of a device after resuming
the parent is likely to produce less scheduling and memory management
noise than starting it upfront while at the same time it should not
increase the resume duration substantially.
Accordingly, modify the code to start the async resume of the device's
children when the processing of the parent has been completed in each
stage of device resume and only start async resume upfront for devices
without parents.
Also make it check if a given device can be resumed asynchronously
before starting the synchronous resume of it in case it will have to
wait for another that is already resuming asynchronously.
In addition to making the async resume of devices more friendly to
systems with relatively less computing resources, this change is also
preliminary for analogous changes in the suspend path.
On the systems where it has been tested, this change by itself does
not affect the overall system resume duration in a measurable way.
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-1-saravanak@google.com/ [1]
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/22630663.EfDdHjke4D@rjwysocki.net
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar).
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian).
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai).
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski).
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng).
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar).
- Make it possible to avoid enabling capacity-aware scheduling (CAS) in
the intel_pstate driver and relocate a check for out-of-band (OOB)
platform handling in it to make it detect OOB before checking HWP
availability (Rafael Wysocki).
- Fix dbs_update() to avoid inadvertent conversions of negative integer
values to unsigned int which causes CPU frequency selection to be
inaccurate in some cases when the "conservative" cpufreq governor is
in use (Jie Zhan).
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki).
- Make it possible to tell the intel_idle driver to ignore its built-in
table of idle states for the given processor, clean up the handling
of auto-demotion disabling on Baytrail and Cherrytrail chips in it,
and update its MAINTAINERS entry (David Arcari, Artem Bityutskiy,
Rafael Wysocki).
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai).
- Clean up the Energy Model handling code somewhat (Rafael Wysocki).
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing).
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba).
- Address RCU-related sparse warnings in the Energy Model code (Rafael
Wysocki).
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao).
- Unify error handling during runtime suspend and runtime resume in the
core to help drivers to implement more consistent runtime PM error
handling (Rafael Wysocki).
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki).
- Rework the handling of the "smart suspend" driver flag in the PM core
to avoid issues hat may occur when drivers using it depend on some
other drivers and clean up the related PM core code (Rafael Wysocki,
Colin Ian King).
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to avoid
situations in which some of them may not be resumed (Rafael Wysocki).
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu).
- Suppress sleeping parent warning in device_pm_add() in the case when
new children are added under a device with the power.direct_complete
set after it has been processed by device_resume() (Xu Yang).
- Remove needless return in three void functions related to system
wakeup (Zijun Hu).
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver).
- Remove unused helper functions related to system sleep (David Alan
Gilbert).
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson).
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven).
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmfhhTYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO16/gIAKuRiG1fFgUcUSXC1iFu42vrB/1i4wpA
02GICACqM3K6/5jd3ct/WOU28GUgDs+xcmqH7CnMaM6y9nXEWjWarmSfFekAO+0q
TPtQ7xTy0hBCB3he1P2uLKBJBin4Wn47U9/rvs4J7mQd5zDxTINKIiVoHg2lEE+s
HAeSoNRb2sp5IZDm9+/LfhHNYRP1mJ97cbZlymqctGB3xgDL7qMLid/1+gFPHAQS
4/LXj3IgyU8DpA/j5nhtpaAqjN5g2QxIUfQgADRIcESK99Y/7aAMs1/G0WhJKaay
9yx+4/xmkGvVCZQx1DphksFLISEzltY0SFWLsoppPzBTGVEW2GQQsNI=
=LqVy
-----END PGP SIGNATURE-----
Merge tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are dominated by cpufreq updates which in turn are dominated by
updates related to boost support in the core and drivers and
amd-pstate driver optimizations.
Apart from the above, there are some cpuidle updates including a
rework of the most recent idle intervals handling in the venerable
menu governor that leads to significant improvements in some
performance benchmarks, as the governor is now more likely to predict
a shorter idle duration in some cases, and there are updates of the
core device power management code, mostly related to system suspend
and resume, that should help to avoid potential issues arising when
the drivers of devices depending on one another want to use different
optimizations.
There is also a usual collection of assorted fixes and cleanups,
including removal of some unused code.
Specifics:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code in drivers (Viresh Kumar)
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, zuoqian)
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai)
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski)
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng)
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar)
- Make it possible to avoid enabling capacity-aware scheduling (CAS)
in the intel_pstate driver and relocate a check for out-of-band
(OOB) platform handling in it to make it detect OOB before checking
HWP availability (Rafael Wysocki)
- Fix dbs_update() to avoid inadvertent conversions of negative
integer values to unsigned int which causes CPU frequency selection
to be inaccurate in some cases when the "conservative" cpufreq
governor is in use (Jie Zhan)
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki)
- Make it possible to tell the intel_idle driver to ignore its
built-in table of idle states for the given processor, clean up the
handling of auto-demotion disabling on Baytrail and Cherrytrail
chips in it, and update its MAINTAINERS entry (David Arcari, Artem
Bityutskiy, Rafael Wysocki)
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai)
- Clean up the Energy Model handling code somewhat (Rafael Wysocki)
- Use kfree_rcu() to simplify the handling of runtime Energy Model
updates (Li RongQing)
- Add an entry for the Energy Model framework to MAINTAINERS as
properly maintained (Lukasz Luba)
- Address RCU-related sparse warnings in the Energy Model code
(Rafael Wysocki)
- Remove ENERGY_MODEL dependency on SMP and allow it to be selected
when DEVFREQ is set without CPUFREQ so it can be used on a wider
range of systems (Jeson Gao)
- Unify error handling during runtime suspend and runtime resume in
the core to help drivers to implement more consistent runtime PM
error handling (Rafael Wysocki)
- Drop a redundant check from pm_runtime_force_resume() and rearrange
documentation related to __pm_runtime_disable() (Rafael Wysocki)
- Rework the handling of the "smart suspend" driver flag in the PM
core to avoid issues hat may occur when drivers using it depend on
some other drivers and clean up the related PM core code (Rafael
Wysocki, Colin Ian King)
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to
avoid situations in which some of them may not be resumed (Rafael
Wysocki)
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu)
- Suppress sleeping parent warning in device_pm_add() in the case
when new children are added under a device with the
power.direct_complete set after it has been processed by
device_resume() (Xu Yang)
- Remove needless return in three void functions related to system
wakeup (Zijun Hu)
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver)
- Remove unused helper functions related to system sleep (David Alan
Gilbert)
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson)
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven)
- Update the cpupower utility to fix lib version-ing in it and memory
leaks in error legs, remove hard-coded values, and implement CPU
physical core querying (Thomas Renninger, John B. Wyatt IV, Shuah
Khan, Yiwei Lin, Zhongqiu Han)"
* tag 'pm-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (139 commits)
PM: sleep: Fix bit masking operation
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
PM: sleep: Fix handling devices with direct_complete set on errors
cpuidle: Init cpuidle only for present CPUs
PM: clk: Remove unused pm_clk_remove()
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
cpufreq: tegra186: Share policy per cluster
cpupower: Make lib versioning scheme more obvious and fix version link
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
PM: EM: Address RCU-related sparse warnings
cpupower: Implement CPU physical core querying
pm: cpupower: remove hard-coded topology depth values
pm: cpupower: Fix cmd_monitor() error legs to free cpu_topology
...
Merge updates related to system sleep for 6.15-rc1 including fixes,
cleanups and a rework of the "smart suspend" driver flag handling to
avoid issues that may occur when drivers using it depend on some other
drivers:
- Rework the handling of the "smart suspend" driver flag in the PM core
to avoid issues hat may occur when drivers using it depend on some
other drivers and clean up the related PM core code (Rafael Wysocki,
Colin Ian King).
- Fix the handling of devices with the power.direct_complete flag set
if device_suspend() returns an error for at least one device to avoid
situations in which some of them may not be resumed (Rafael Wysocki).
- Use mutex_trylock() in hibernate_compressor_param_set() to avoid a
possible deadlock that may occur if the "compressor" hibernation
module parameter is accessed during the registration of a new
ieee80211 device (Lizhi Xu).
- Suppress sleeping parent warning in device_pm_add() in the case when
new children are added under a device with the power.direct_complete
set after it has been processed by device_resume() (Xu Yang).
- Remove needless return in three void functions related to system
wakeup (Zijun Hu).
- Replace deprecated kmap_atomic() with kmap_local_page() in the
hibernation core code (David Reaver).
- Remove unused helper functions related to system sleep (David Alan
Gilbert).
- Clean up s2idle_enter() so it does not lock and unlock CPU offline
in vain and update comments in it (Ulf Hansson).
- Clean up broken white space in dpm_wait_for_children() (Geert
Uytterhoeven).
* pm-sleep:
PM: sleep: Fix bit masking operation
PM: sleep: Fix handling devices with direct_complete set on errors
PM: sleep: core: Fix indentation in dpm_wait_for_children()
PM: s2idle: Extend comment in s2idle_enter()
PM: s2idle: Drop redundant locks when entering s2idle
PM: sleep: Remove unused pm_generic_ wrappers
PM: sleep: Rearrange dpm_async_fn() and async state clearing
PM: sleep: Rename power.async_in_progress to power.work_in_progress
PM: core: Tweak pm_runtime_block_if_disabled() return value
PM: runtime: Convert pm_runtime_blocked() to static inline
PM: sleep: Update power.smart_suspend under PM spinlock
PM: sleep: Adjust check before setting power.must_resume
PM: wakeup: Remove needless return in three void APIs
PM: sleep: Suppress sleeping parent warning in special case
PM: hibernate: Avoid deadlock in hibernate_compressor_param_set()
PM: sleep: Avoid unnecessary checks in device_prepare_smart_suspend()
PM: sleep: Use DPM_FLAG_SMART_SUSPEND conditionally
PM: runtime: Introduce pm_runtime_blocked()
PM: Block enabling of runtime PM during system suspend
PM: hibernate: Replace deprecated kmap_atomic() with kmap_local_page()
The mask operation link->flags | DL_FLAG_PM_RUNTIME is always true which
is incorrect. The mask operation should be using the bit-wise &
operator. Fix this.
Fixes: bca84a7b93 ("PM: sleep: Use DPM_FLAG_SMART_SUSPEND conditionally")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250319114324.791829-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When dpm_suspend() fails, some devices with power.direct_complete set
may not have been handled by device_suspend() yet, so runtime PM has
not been disabled for them yet even though power.direct_complete is set.
Since device_resume() expects that runtime PM has been disabled for all
devices with power.direct_complete set, it will attempt to reenable
runtime PM for the devices that have not been processed by device_suspend()
which does not make sense. Had those devices had runtime PM disabled
before device_suspend() had run, device_resume() would have inadvertently
enable runtime PM for them, but this is not expected to happen because
it would require ->prepare() callbacks to return positive values for
devices with runtime PM disabled, which would be invalid.
In practice, this issue is most likely benign because pm_runtime_enable()
will not allow the "disable depth" counter to underflow, but it causes a
warning message to be printed for each affected device.
To allow device_resume() to distinguish the "direct complete" devices
that have been processed by device_suspend() from those which have not
been handled by it, make device_suspend() set power.is_suspended for
"direct complete" devices.
Next, move the power.is_suspended check in device_resume() before the
power.direct_complete check in it to make it skip the "direct complete"
devices that have not been handled by device_suspend().
This change is based on a preliminary patch from Saravana Kannan.
Fixes: aae4518b31 ("PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily")
Link: https://lore.kernel.org/linux-pm/20241114220921.2529905-2-saravanak@google.com/
Reported-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Link: https://patch.msgid.link/12627587.O9o76ZdvQC@rjwysocki.net
pm_clk_remove() is currently unused.
It hasn't been used since at least 2011 when it was renamed from
pm_runtime_clk_remove() by commit 3d5c30367c ("PM: Rename clock
management functions")
Remove it.
Note that the __pm_clk_remove() is still used and is left in.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307212347.68785-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pm_generic_thaw_early() has been unused since 2016's
commit 294f47ffd5 ("PM / Domains: Remove redundant system PM callbacks")
pm_generic_freeze_late() has been unused since 2019's
commit 3cd7957e85 ("ACPI: PM: Simplify and fix PM domain hibernation
callbacks")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250307021750.457600-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a confusing difference in error handling between rpm_suspend()
and rpm_resume() related to the special way in which -EAGAIN and -EBUSY
error values are treated by the former. Also, converting -EACCES coming
from the callback to I/O error, which it quite likely is not, may
confuse runtime PM users.
To address the above, modify rpm_callback() to convert -EACCES coming
from the driver to -EAGAIN and to set power.runtime_error only if the
return value is not -EAGAIN or -EBUSY.
This will cause the error handling in rpm_resume() and rpm_suspend() to
work consistently, so drop the no longer needed -EAGAIN or -EBUSY
special case from the latter and make it retry autosuspend if
power.runtime_error is unset.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12620037.O9o76ZdvQC@rjwysocki.net
In preparation for subsequent changes, move the power.completion
reinitialization along with clearing power.work_in_progress into a
separate function called dpm_clear_async_state() and rearrange
dpm_async_fn() to get rid of unnecessary indentation.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/8494650.T7Z3S40VBb@rjwysocki.net
Rename the async_in_progress field in struct dev_pm_info to
work_in_progress as after subsequent changes it will mean work in
general rather than just async work.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3338693.aeNJFYEL58@rjwysocki.net
Modify pm_runtime_block_if_disabled() to return true when runtime PM
is disabled for the device, regardless of the power.last_status value.
This effectively prevents "smart suspend" from being enabled for
devices with runtime PM disabled in device_prepare(), even transiently,
so update the related comment in that function accordingly.
If a device has runtime PM disabled in device_prepare(), it is not
actually known whether or not runtime PM will be enabled for that
device going forward, so it is more appropriate to postpone the
"smart suspend" optimization for the device in the given system
suspend-resume cycle than to enable it and get confused going
forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/13718674.uLZWGnKmhe@rjwysocki.net
The comment in pm_runtime_blocked() is acutally wrong: power.last_status
is not a bit field. Its data type is an enum and so one can reasonably
assume that partial updates of it will not be observed.
Accordingly, pm_runtime_blocked() can be converted to a static inline
function and the related locking overhead can be eliminated, so long
as it is only used in system suspend/resume code paths because
power.last_status is not expected to be updated concurrently while
that code is running.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/1923449.tdWV9SEqCh@rjwysocki.net
Put the update of the power.smart_suspend device flag under the PM
spinlock of the device in case multiple bit fields in struct dev_pm_info
occupy one memory location which needs to be updated via RMW every time
any of these bit fields is updated.
The lock in question is already held around the power.direct_complete
flag update in device_prepare() for the same reason, so this change does
not add locking-related overhead to the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2368159.ElGaqSPkdT@rjwysocki.net
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b9 ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Since pm_runtime_force_resume() requires pm_runtime_force_suspend() to
be called before it on the same device, the runtime PM status of the
device is RPM_SUSPENDED when it is called unless the device's runtime
PM status is changed somewhere else in the meantime.
However, even if that happens, the power.needs_force_resume
check is still required to pass and that flag is only set by
pm_runtime_force_suspend() once and it is cleared at the end of
pm_runtime_force_resume(), so it cannot be taken into account
twice in a row.
According to the above, the pm_runtime_status_suspended(dev) check in
pm_runtime_force_resume() is redundant, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2309120.iZASKD2KPV@rjwysocki.net
Currently, if power.no_callbacks is set, device_prepare() will also set
power.direct_complete for the device. If power.direct_complete is set
in device_resume(), the clearing of power.is_prepared will be skipped
and if new children appear under the device at that point, a warning
will be printed.
After commit (f76b168b6f PM: Rename dev_pm_info.in_suspend to
is_prepared), power.is_prepared is generally cleared in device_resume()
before invoking the resume callback for the device which allows that
callback to add new children without triggering the warning, but this
does not happen for devices with power.direct_complete set.
This problem is visible in USB where usb_set_interface() can be called
before device_complete() clears power.is_prepared for interface devices
and since ep devices are added then, the warning is printed:
usb 1-1: reset high-speed USB device number 3 using ci_hdrc
ep_81: PM: parent 1-1:1.1 should not be sleeping
PM: resume devices took 0.936 seconds
Since it is legitimate to add the ep devices at that point, the
warning above is not particularly useful, so get rid of it by
clearing power.is_prepared in device_resume() for devices with
power.direct_complete set if they have no PM callbacks, in which
case they need not actually resume for the new children to work.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20250224070049.3338646-1-xu.yang_2@nxp.com
[ rjw: New subject, changelog edits, rephrased new code comment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add an optimization (on top of previous changes) to avoid calling
pm_runtime_blocked(), which involves acquiring the device's PM spinlock,
for devices with no PM callbacks and runtime PM "blocked".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2978873.e9J7NaK4W3@rjwysocki.net
The last use of of_pm_clk_add_clk() was removed by 2019's
commit fe00f8900c ("irqchip/gic-pm: Update driver to use
clk_bulk APIs")
Remove it.
Note that the plural version of_pm_clk_add_clks() is still being
used and is left.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250224010610.187503-1-linux@treblig.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A recent discussion has revealed that using DPM_FLAG_SMART_SUSPEND
unconditionally is generally problematic because it may lead to
situations in which the device's runtime PM information is internally
inconsistent or does not reflect its real state [1].
For this reason, change the handling of DPM_FLAG_SMART_SUSPEND so that
it is only taken into account if it is consistently set by the drivers
of all devices having any PM callbacks throughout dependency graphs in
accordance with the following rules:
- The "smart suspend" feature is only enabled for devices whose drivers
ask for it (that is, set DPM_FLAG_SMART_SUSPEND) and for devices
without PM callbacks unless they have never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for the device's parent unless the parent does not take
children into account or it has never had runtime PM enabled.
- The "smart suspend" feature is not enabled for a device if it has not
been enabled for one of the device's suppliers taking runtime PM into
account unless that supplier has never had runtime PM enabled.
Namely, introduce a new device PM flag called smart_suspend that is only
set if the above conditions are met and update all DPM_FLAG_SMART_SUSPEND
users to check power.smart_suspend instead of directly checking the
latter.
At the same time, drop the power.set_active flage introduced recently
in commit 3775fc538f ("PM: sleep: core: Synchronize runtime PM status
of parents and children") because it is now sufficient to check
power.smart_suspend along with the dev_pm_skip_resume() return value
to decide whether or not pm_runtime_set_active() needs to be called
for the device.
Link: https://lore.kernel.org/linux-pm/CAPDyKFroyU3YDSfw_Y6k3giVfajg3NQGwNWeteJWqpW29BojhQ@mail.gmail.com/ [1]
Fixes: 7585946243 ("PM: sleep: core: Restrict power.set_active propagation")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci
Link: https://patch.msgid.link/1914558.tdWV9SEqCh@rjwysocki.net
Introduce a new helper function called pm_runtime_blocked()
for checking the power.last_status value indicating whether or not
enabling runtime PM for the given device has been blocked (which
happens in the "prepare" phase of system-wide suspend if runtime
PM is disabled for the given device at that point).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/4632087.LvFx2qVVIh@rjwysocki.net
If device_prepare() runs on a device that has never had runtime
PM enabled so far, it may reasonably assume that runtime PM will
not be enabled for that device during the system suspend-resume
cycle currently in progress, but this has never been guaranteed.
To verify this assumption, make device_prepare() arrange for
triggering a device warning accompanied by a call trace dump if
runtime PM is enabled for such a device after it has returned.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6131109.lOV4Wx5bFT@rjwysocki.net
There are only two callers of __pm_runtime_disable(), one of which is
device_suspend_late() and the other is pm_runtime_disable() that has
its own kerneldoc comment and there are no plans to add any more of
them. Since they use different values of the __pm_runtime_disable()
second parameter, the actual code behavior is different in each case,
but it is all documented in the __pm_runtime_disable() kerneldoc comment
which is not particularly straightforward.
For this reason, move the information from the __pm_runtime_disable()
kerneldoc comment to the pm_runtime_disable() one and into a separate
comment in device_suspend_late() and remove the __pm_runtime_disable()
kerneldoc comment altogether.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/12617588.O9o76ZdvQC@rjwysocki.net
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/all/8d1ce108b043896733ce08d3deea6e84941d499b.1738746821.git.namcao@linutronix.de
Commit 3775fc538f ("PM: sleep: core: Synchronize runtime PM status of
parents and children") exposed an issue related to simple_pm_bus_pm_ops
that uses pm_runtime_force_suspend() and pm_runtime_force_resume() as
bus type PM callbacks for the noirq phases of system-wide suspend and
resume.
The problem is that pm_runtime_force_suspend() does not distinguish
runtime-suspended devices from devices for which runtime PM has never
been enabled, so if it sees a device with runtime PM status set to
RPM_ACTIVE, it will assume that runtime PM is enabled for that device
and so it will attempt to suspend it with the help of its runtime PM
callbacks which may not be ready for that. As it turns out, this
causes simple_pm_bus_runtime_suspend() to crash due to a NULL pointer
dereference.
Another problem related to the above commit and simple_pm_bus_pm_ops is
that setting runtime PM status of a device handled by the latter to
RPM_ACTIVE will actually prevent it from being resumed because
pm_runtime_force_resume() only resumes devices with runtime PM status
set to RPM_SUSPENDED.
To mitigate these issues, do not allow power.set_active to propagate
beyond the parent of the device with DPM_FLAG_SMART_SUSPEND set that
will need to be resumed, which should be a sufficient stop-gap for the
time being, but they will need to be properly addressed in the future
because in general during system-wide resume it is necessary to resume
all devices in a dependency chain in which at least one device is going
to be resumed.
Fixes: 3775fc538f ("PM: sleep: core: Synchronize runtime PM status of parents and children")
Closes: https://lore.kernel.org/linux-pm/1c2433d4-7e0f-4395-b841-b8eac7c25651@nvidia.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6137505.lOV4Wx5bFT@rjwysocki.net
Commit 6e176bf8d4 ("PM: sleep: core: Do not skip callbacks in the
resume phase") overlooked the case in which the parent of a device with
DPM_FLAG_SMART_SUSPEND set did not use that flag and could be runtime-
suspended before a transition into a system-wide sleep state. In that
case, if the child is resumed during the subsequent transition from
that state into the working state, its runtime PM status will be set to
RPM_ACTIVE, but the runtime PM status of the parent will not be updated
accordingly, even though the parent will be resumed too, because of the
dev_pm_skip_suspend() check in device_resume_noirq().
Address this problem by tracking the need to set the runtime PM status
to RPM_ACTIVE during system-wide resume transitions for devices with
DPM_FLAG_SMART_SUSPEND set and all of the devices depended on by them.
Fixes: 6e176bf8d4 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Closes: https://lore.kernel.org/linux-pm/Z30p2Etwf3F2AUvD@hovoldconsulting.com/
Reported-by: Johan Hovold <johan@kernel.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/12619233.O9o76ZdvQC@rjwysocki.net
Add device-managed variant of dev_pm_set_wake_irq which automatically
clear the wake irq on device destruction to simplify error handling
and resource management in drivers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250103-wake_irq-v2-1-e3aeff5e9966@nxp.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki