Change "resourse" into "resource" in the name of a sysfs attribute.
Fixes: d829fc8a10 ("scsi: ufs: sysfs: unit descriptor")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufshcd_host_reset_and_restore(), scale up clocks only when clock
scaling is supported. Without this change CPU latency is voted for 0
(ufshcd_pm_qos_update) during resume unconditionally.
Signed-off-by: anvithdosapati <anvithdosapati@google.com>
Link: https://lore.kernel.org/r/20250616085734.2133581-1-anvithdosapati@google.com
Fixes: a3cd5ec55f ("scsi: ufs: add load based scaling of UFS gear")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mostly trivial updates and bug fixes (core update is a comment
spelling fix). The bigger UFS update is the clock scaling and
frequency fixes.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaEL7ICYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheP8AQDZ3hTi
7A71WtBMLP/ReSOPZIpqMYqEn2HeaeOygFfqOgD/bYySmBmsBi5YWjCopB9NXHcS
IZz6xIUiNzWziKm6nLw=
=noij
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Mostly trivial updates and bug fixes (core update is a comment
spelling fix).
The bigger UFS update is the clock scaling and frequency fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Prevent calling phy_exit() before phy_init()
scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path
scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq
scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear()
scsi: aacraid: Remove useless code
scsi: core: devinfo: Fix typo in comment
scsi: ufs: core: Don't perform UFS clkscaling during host async scan
ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter
function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because
resuming involves submitting a SCSI command and ufshcd_queuecommand()
returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this
hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has
been called instead of before.
Backtrace:
__switch_to+0x174/0x338
__schedule+0x600/0x9e4
schedule+0x7c/0xe8
schedule_timeout+0xa4/0x1c8
io_schedule_timeout+0x48/0x70
wait_for_common_io+0xa8/0x160 //waiting on START_STOP
wait_for_completion_io_timeout+0x10/0x20
blk_execute_rq+0xe4/0x1e4
scsi_execute_cmd+0x108/0x244
ufshcd_set_dev_pwr_mode+0xe8/0x250
__ufshcd_wl_resume+0x94/0x354
ufshcd_wl_runtime_resume+0x3c/0x174
scsi_runtime_resume+0x64/0xa4
rpm_resume+0x15c/0xa1c
__pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing
ufshcd_err_handler+0x1a0/0xd08
process_one_work+0x174/0x808
worker_thread+0x15c/0x490
kthread+0xf4/0x1ec
ret_from_fork+0x10/0x20
Signed-off-by: Sanjeev Yadav <sanjeev.y@mediatek.com>
[ bvanassche: rewrote patch description ]
Fixes: 62694735ca ("[SCSI] ufs: Add runtime PM support for UFS host controller driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250523201409.1676055-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaDiQ2CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWtDAP9p0Jd/
H4VMpYT5iETyq3TeAXTm1jVXL9Gnux5JMfskGwEA9kST8O6gorVOVKck+Eq0Hc9r
w8NDnBK91hknIai5kE8=
=/1L9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits)
scsi: target: core: Constify struct target_opcode_descriptor
scsi: target: core: Constify enabled() in struct target_opcode_descriptor
scsi: hisi_sas: Fix warning detected by sparse
scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer
scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table()
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller
scsi: mvsas: Fix typos in SAS/SATA VSP register comments
scsi: fnic: Replace memset() with eth_zero_addr()
scsi: ufs: core: Support updating device command timeout
scsi: ufs: core: Change hwq_id type and value
scsi: ufs: core: Increase the UIC command timeout further
scsi: zfcp: Simplify workqueue allocation
scsi: ufs: core: Print error value as hex format in ufshcd_err_handler()
scsi: sd: Remove the stream_status member from scsi_stream_status_header
scsi: docs: Clean up some style in scsi_mid_low_api
scsi: core: Remove unused scsi_dev_info_list_del_keyed()
scsi: isci: Remove unused sci_remote_device_reset()
scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH
scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream()
...
When preparing for UFS clock scaling, the UFS driver will quiesce all
sdevs queues in the UFS SCSI host tagset list and then unquiesce them in
ufshcd_clock_scaling_unprepare(). If the UFS SCSI host async scan is in
progress at this time, some LUs may be added to the tagset list between
UFS clkscale prepare and unprepare. This can cause two issues:
1. During clock scaling, there may be I/O requests issued through new
added queues that have not been quiesced, leading to task abort issue.
2. These new added queues that have not been quiesced will be unquiesced
as well when UFS clkscale is unprepared, resulting in warning prints.
Therefore, use the mutex lock scan_mutex in
ufshcd_clock_scaling_prepare() and ufshcd_clock_scaling_unprepare() to
protect it.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250522081233.2358565-1-quic_ziqichen@quicinc.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After UFS_ABORT_TASK has been processed successfully, the host will
generate MCQ IRQ for ABORT TAG with response OCS_ABORTED. This results in
ufshcd_compl_one_cqe() calling ufshcd_release_scsi_cmd().
But ufshcd_mcq_abort() already calls ufshcd_release_scsi_cmd(), resulting
in __ufshcd_release() being called twice. This means
hba->clk_gating.active_reqs will be decreased twice, making it go
negative.
Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort().
Fixes: f1304d4420 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Signed-off-by: ping.gao <ping.gao@samsung.com>
Link: https://lore.kernel.org/r/20250516083812.3894396-1-ping.gao@samsung.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The default device command timeout remains 1.5 seconds, but platform
drivers can override it if needed.
Some UFS device commands may timeout due to being blocked by regular SCSI
write commands. Therefore, the maximum timeout needs to be extended to 30
seconds, matching the SCSI write command timeout. And for error injection
purposes, set the minimum value to 1 ms.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250510080345.595798-1-peter.wang@mediatek.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change the type of hwq_id to u32 because the member id of struct
ufs_hw_queue is u32 (hwq->id) and the trace entry hwq_id is also u32.
Set hwq_id to 0 if MCQ is not supported, as SDB mode only supports one
hardware queue.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250509021648.412098-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On my development board I observed that it can take a little longer than
two seconds before UIC completions are processed if the UART is enabled.
Hence this patch that increases the UIC command timeout upper limit
further.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250508165411.3755300-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is better to print saved_err and saved_uic_err in hex format. Integer
format is hard to decode.
[ 1024.485428] [2: kworker/u20:13:28211] exynos-ufs 17100000.ufs: ufshcd_err_handler started; HBA state eh_fatal; powered 1; shutting down 0; saved_err = 131072; saved_uic_err = 0; force_reset = 0; link is broken
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Link: https://lore.kernel.org/r/20250512025210.5802-1-wkon.kim@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 500d4b742e ("scsi: ufs: core: Add WB buffer resize support")
incorrectly reads the value of offset
DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP to determine whether WB resize is
supported.
Fix the issue by reading the value of DEVICE_DESC_PARAM_EXT_WB_SUP to
determine whether the device supports WB resize.
Fixes: 500d4b742e ("scsi: ufs: core: Add WB buffer resize support")
Reported-by: Peter Wang <peter.wang@mediatek.com>
Closes: https://lore.kernel.org/all/7ce05b28f5d4b4b4973244310010c1487
Signed-off-by: Huan Tang <tanghuan@vivo.com>
Link: https://lore.kernel.org/r/20250423092917.1031-1-tanghuan@vivo.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull in fixes from 6.15 and resolve a few conflicts so we can have a
clean base for UFS patches.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a NULL check for the returned hwq pointer by ufshcd_mcq_req_to_hwq().
This is similar to the fix in commit 74736103fb ("scsi: ufs: core: Fix
ufshcd_abort_one racing issue").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250412195909.315418-1-chenyuan0y@gmail.com
Fixes: ab248643d3 ("scsi: ufs: core: Add error handling for MCQ mode")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Samsung UFS devices require additional time in hibern8 mode before
exiting, beyond the negotiated handshaking phase between the host and
device. Introduce a quirk to increase the PA_HIBERN8TIME parameter by
100 µs, a value derived from experiments, to ensure a proper hibernation
process.
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20250411121630.21330-3-quic_mapa@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Follow JESD220G, support a WB buffer resize function through sysfs. The
host can obtain resize hint and resize status, and enable the resize
operation. Add three sysfs nodes:
1. wb_resize_enable
2. wb_resize_hint
3. wb_resize_status
The detailed definition of the three nodes can be found in the sysfs
documentation.
Signed-off-by: Huan Tang <tanghuan@vivo.com>
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20250411092924.1116-1-tanghuan@vivo.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A race can occur between the MCQ completion path and the abort handler:
once a request completes, __blk_mq_free_request() sets rq->mq_hctx to
NULL, meaning the subsequent ufshcd_mcq_req_to_hwq() call in
ufshcd_mcq_abort() can return a NULL pointer. If this NULL pointer is
dereferenced, the kernel will crash.
Add a NULL check for the returned hwq pointer. If hwq is NULL, log an
error and return FAILED, preventing a potential NULL-pointer
dereference. As suggested by Bart, the ufshcd_cmd_inflight() check is
removed.
This is similar to the fix in commit 74736103fb ("scsi: ufs: core: Fix
ufshcd_abort_one racing issue").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250410001320.2219341-1-chenyuan0y@gmail.com
Fixes: f1304d4420 ("scsi: ufs: mcq: Added ufshcd_mcq_abort()")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On systems with a large number request slots and unavailable MCQ ESI,
the current design of the interrupt handler can delay handling of other
subsystems interrupts causing display artifacts, GPU stalls or system
firmware requests timeouts.
Since the interrupt routine can take quite some time, it's preferable to
move it to a threaded handler and leave the hard interrupt handler wake
up the threaded interrupt routine, the interrupt line would be masked
until the processing is finished in the thread thanks to the
IRQS_ONESHOT flag.
When MCQ & ESI interrupts are enabled the I/O completions are now
directly handled in the "hard" interrupt routine to keep IOPs high since
queues handling is done in separate per-queue interrupt routines.
This fixes all encountered issued when running FIO tests on the Qualcomm
SM8650 platform.
Example of errors reported on a loaded system:
[drm:dpu_encoder_frame_done_timeout:2706] [dpu error]enc32 frame done timeout
msm_dpu ae01000.display-controller: [drm:hangcheck_handler [msm]] *ERROR* 67.5.20.1: hangcheck detected gpu lockup rb 2!
msm_dpu ae01000.display-controller: [drm:hangcheck_handler [msm]] *ERROR* 67.5.20.1: completed fence: 74285
msm_dpu ae01000.display-controller: [drm:hangcheck_handler [msm]] *ERROR* 67.5.20.1: submitted fence: 74286
Error sending AMC RPMH requests (-110)
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250407-topic-ufs-use-threaded-irq-v3-3-08bee980f71e@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation of adding a threaded interrupt handler, track when the
MCQ ESI interrupt handlers were installed so we can optimize the MCQ
interrupt handling to avoid walking the threaded handler in the case ESI
handlers are enabled.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250407-topic-ufs-use-threaded-irq-v3-2-08bee980f71e@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to prepare introduction of a threaded interrupt handler, drop
last_intr_status & last_intr_ts drop the ufs_stats struct, and the
associated debug code.
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250407-topic-ufs-use-threaded-irq-v3-1-08bee980f71e@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufs device JEDEC specification version 4.1 adds support for the
device level exception events. To support this new device level
exception feature, expose two new sysfs nodes below to provide the user
space access to the device level exception information.
/sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count
/sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id
The device_lvl_exception_count sysfs node reports the number of device
level exceptions that have occurred since the last time this variable is
reset. Writing a value of 0 will reset it. The device_lvl_exception_id
reports the exception ID which is the qDeviceLevelExceptionID attribute
of the device JEDEC specifications version 4.1 and later. The user space
application can query these sysfs nodes to get more information about
the device level exception.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/6278d7c125b2f0cf5056f4a647a4b9c1fdd24fc7.1743198325.git.quic_nguyenb@quicinc.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd_wb_presrv_usrspc_keep_vcc_on() function has deviated from its
original implementation. The "_keep_vcc_on" part of the function name is
misleading. Rename the function to ufshcd_wb_curr_buff_threshold_check()
to improve the readability. Also, updated the comments in the function.
There is no change to the functionality.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/02ae5e133f6ebf23b54d943e6d1d9de2544eb80e.1743192926.git.quic_nguyenb@quicinc.com
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash. The only non-trivial core change
is an addition to unit attention handling to recognize UAs for power
on/reset and new media so the tape driver can use it.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21
S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1
uLjxylwYEfVLDf8gwJ0=
=mkM+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
There is a TOCTOU race in ufshcd_compl_one_cqe(): hba->dev_cmd.complete may
be cleared from another thread after it has been checked and before it is
used. Fix this race by moving the device command completion from the stack
of the device command submitter into struct ufs_hba. This patch fixes the
following kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Call trace:
_raw_spin_lock_irqsave+0x34/0x80
complete+0x24/0xb8
ufshcd_compl_one_cqe+0x13c/0x4f0
ufshcd_mcq_poll_cqe_lock+0xb4/0x108
ufshcd_intr+0x2f4/0x444
__handle_irq_event_percpu+0xbc/0x250
handle_irq_event+0x48/0xb0
Fixes: 5a0b0cb9be ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250314225206.1487838-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shawn Lin <shawn.lin@rock-chips.com> says:
This patchset adds initial UFS controller supprt for RK3576 SoC.
Patch 1 is the dt-bindings. Patch 2-4 deal with rpm and spm support
in advanced suggested by Ulf. Patch 5 exports two new APIs for host
driver. Patch 6 and 7 are the host driver and dtsi support.
Link: https://lore.kernel.org/r/1738736156-119203-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
These two APIs will be used by glue driver if they need a different HCE
process.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1738736156-119203-6-git-send-email-shawn.lin@rock-chips.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the device doesn't support arpmb we'll crash due to copying user data in
bsg_transport_sg_io_fn().
In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not
set the job's reply_len.
Memory crash backtrace:
3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22
4,1308,531166555,-;Call Trace:
4,1309,531166559,-; <TASK>
4,1310,531166565,-; ? show_regs+0x6d/0x80
4,1311,531166575,-; ? die+0x37/0xa0
4,1312,531166583,-; ? do_trap+0xd4/0xf0
4,1313,531166593,-; ? do_error_trap+0x71/0xb0
4,1314,531166601,-; ? usercopy_abort+0x6c/0x80
4,1315,531166610,-; ? exc_invalid_op+0x52/0x80
4,1316,531166622,-; ? usercopy_abort+0x6c/0x80
4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20
4,1318,531166643,-; ? usercopy_abort+0x6c/0x80
4,1319,531166652,-; __check_heap_object+0xe3/0x120
4,1320,531166661,-; check_heap_object+0x185/0x1d0
4,1321,531166670,-; __check_object_size.part.0+0x72/0x150
4,1322,531166679,-; __check_object_size+0x23/0x30
4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0
Fixes: 6ff265fc5e ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Cc: stable@vger.kernel.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Link: https://lore.kernel.org/r/20250220142039.250992-1-arthur.simchaev@sandisk.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ziqi Chen <quic_ziqichen@quicinc.com> says:
With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
plans. However, the gear speed is only toggled between min and max during
clock scaling. Enable multi-level gear scaling by mapping clock frequencies
to gear speeds, so that when devfreq scales clock frequencies we can put
the UFS link at the appropraite gear speeds accordingly.
This series has been tested on below platforms -
sm8550 mtp + UFS3.1
SM8650 MTP + UFS3.1
SM8750 MTP + UFS4.0
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Link: https://lore.kernel.org/r/20250213080008.2984807-1-quic_ziqichen@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During clock scaling, Write Booster is toggled on or off based on whether
the clock is scaled up or down. However, with OPP V2 powered multi-level
gear scaling, the gear can be scaled amongst multiple gear speeds, e.g., it
may scale down from G5 to G4, or from G4 to G2. To provide flexibilities,
add a new field for clock scaling such that during clock scaling Write
Booster can be enabled or disabled based on gear speeds but not based on
scaling up or down.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-8-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When disabling clkscale via the clkscale_enable sysfs entry, UFS driver
shall perform scaling up once regardless. Check if scaling up is required
or not first to avoid repetitive work.
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-7-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
plans. However, the gear speed is only toggled between min and max during
clock scaling. Enable multi-level gear scaling by mapping clock frequencies
to gear speeds, so that when devfreq scales clock frequencies we can put
the UFS link at the appropriate gear speeds accordingly.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-6-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a vop to map UFS host controller clock frequencies to the corresponding
maximum supported UFS high speed gear speeds. During clock scaling, we can
map the target clock frequency, demanded by devfreq, to the maximum
supported gear speed, so that devfreq can scale the gear to the highest
gear speed supported at the target clock frequency, instead of just scaling
up/down the gear between the min and max gear speeds.
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-4-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of only two frequencies, if OPP V2 is used, the UFS devfreq clock
scaling may scale the clock among multiple frequencies, so just passing
up/down to vop clk_scale_notify() is not enough to cover the intermediate
clock freqs between the min and max freqs. Hence pass the target_freq,
which will be used in successive commits, to clk_scale_notify() to allow
the vop to perform corresponding configurations with regard to the clock
freqs.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250213080008.2984807-2-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit bb9850704c ("scsi: ufs: core: Honor runtime/system PM levels if
set by host controller drivers") introduced the check for setting default
PM levels only if the levels are uninitialized by the host controller
drivers. But it missed the fact that the levels could be initialized to 0
(UFS_PM_LVL_0) on purpose by the controller drivers. Even though none of
the drivers are doing so now, the logic should be fixed irrespectively.
So set the default levels unconditionally before calling ufshcd_hba_init()
API which initializes the controller drivers. It ensures that the
controller drivers could override the default levels if required.
Fixes: bb9850704c ("scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers")
Reported-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250219105047.49932-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include the ufs_hba structure as a parameter in various trace events to
provide more context and improve debugging capabilities. Also remove
dev_name which can replace by dev_name(hba->dev).
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250214083026.1177880-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_is_ufs_dev_busy(), ufshcd_print_host_state() and
ufshcd_eh_timed_out() are used in both modes (legacy mode and MCQ mode).
hba->outstanding_reqs only represents the outstanding requests in legacy
mode. Hence, change hba->outstanding_reqs into scsi_host_busy(hba->host) in
these functions.
Fixes: eacb139b77 ("scsi: ufs: core: mcq: Enable multi-circular queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250214224352.3025151-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The third pwr_change_notify() argument is an input parameter. Make this
explicit by declaring it 'const'.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250212213838.1044917-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin hi,
The UFS4.1 standard, released on January 8, 2025, added a new exception
event: HEALTH_CRITICAL, which notifies the host of a device's critical
health condition. This notification implies that the device is approaching
the end of its lifetime based on the amount of performed program/erase
cycles.
Once an EOL (End-of-Life) exception event is received, we increment a
designated member, which is exposed via a sysfs entry. This new entry, will
report the number of times a critical health event has been reported by a
UFS device.
To handle this new sysfs entry, userspace applications can use select(),
poll(), or epoll() to monitor changes in the critical_health attribute. The
kernel will call sysfs_notify() to signal changes, allowing the userspace
application to detect and respond to these changes efficiently.
The host can gain further insight into the specific issue by reading one of
the following attributes: bPreEOLInfo, bDeviceLifeTimeEstA,
bDeviceLifeTimeEstB, bWriteBoosterBufferLifeTimeEst, and
bRPMBLifeTimeEst. All those are available for reading via the driver's
sysfs entries or through an applicable utility. It is up to userspace to
read these attributes if needed.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250211065813.58091-1-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To prevent keys from being compromised if an attacker acquires read
access to kernel memory, some inline encryption hardware can accept keys
which are wrapped by a per-boot hardware-internal key. This avoids
needing to keep the raw keys in kernel memory, without limiting the
number of keys that can be used. Such hardware also supports deriving a
"software secret" for cryptographic tasks that can't be handled by
inline encryption; this is needed for fscrypt to work properly.
To support this hardware, allow struct blk_crypto_key to represent a
hardware-wrapped key as an alternative to a raw key, and make drivers
set flags in struct blk_crypto_profile to indicate which types of keys
they support. Also add the ->derive_sw_secret() low-level operation,
which drivers supporting wrapped keys must implement.
For more information, see the detailed documentation which this patch
adds to Documentation/block/inline-encryption.rst.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650
Link: https://lore.kernel.org/r/20250204060041.409950-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is currently no mechanism to return error from query responses.
Return the error and print the corresponding error message with it.
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250118023808.24726-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup
Fixes: cb77cb5abe ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d10 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.
The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().
Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.
Fixes: 1ab27c9cf8 ("ufs: Add support for clock gating")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:
[ 4.388838] INFO: trying to register non-static key.
[ 4.395673] The code is fine but needs lockdep annotation, or maybe
[ 4.402118] you didn't initialize this object before use?
[ 4.407673] turning off the locking correctness validator.
[ 4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[ 4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.413362] Call trace:
[ 4.413364] show_stack+0x18/0x24 (C)
[ 4.413374] dump_stack_lvl+0x90/0xd0
[ 4.413384] dump_stack+0x18/0x24
[ 4.413392] register_lock_class+0x498/0x4a8
[ 4.413400] __lock_acquire+0xb4/0x1b90
[ 4.413406] lock_acquire+0x114/0x310
[ 4.413413] _raw_spin_lock_irqsave+0x60/0x88
[ 4.413423] ufshcd_setup_clocks+0x2c0/0x490
[ 4.413433] ufshcd_init+0x198/0x10ec
[ 4.413437] ufshcd_pltfrm_init+0x600/0x7c0
[ 4.413444] ufs_qcom_probe+0x20/0x58
[ 4.413449] platform_probe+0x68/0xd8
[ 4.413459] really_probe+0xbc/0x268
[ 4.413466] __driver_probe_device+0x78/0x12c
[ 4.413473] driver_probe_device+0x40/0x11c
[ 4.413481] __device_attach_driver+0xb8/0xf8
[ 4.413489] bus_for_each_drv+0x84/0xe4
[ 4.413495] __device_attach+0xfc/0x18c
[ 4.413502] device_initial_probe+0x14/0x20
[ 4.413510] bus_probe_device+0xb0/0xb4
[ 4.413517] deferred_probe_work_func+0x8c/0xc8
[ 4.413524] process_scheduled_works+0x250/0x658
[ 4.413534] worker_thread+0x15c/0x2c8
[ 4.413542] kthread+0x134/0x200
[ 4.413550] ret_from_fork+0x10/0x20
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b8 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=molg
-----END PGP SIGNATURE-----
Merge tag 'block-6.14-20250131' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Fix a md-cluster regression introduced
- More sysfs race fixes
- Mark anything inside queue freezing as not being able to do IO for
memory allocations
- Fix for a regression introduced in loop in this merge window
- Fix for a regression in queue mapping setups introduced in this merge
window
- Fix for the block dio fops attempting an iov_iter revert upton
getting -EIOCBQUEUED on the read side. This one is going to stable as
well
* tag 'block-6.14-20250131' of git://git.kernel.dk/linux:
block: force noio scope in blk_mq_freeze_queue
block: fix nr_hw_queue update racing with disk addition/removal
block: get rid of request queue ->sysfs_dir_lock
loop: don't clear LO_FLAGS_PARTSCAN on LOOP_SET_STATUS{,64}
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
blk-mq: create correct map for fallback case
block: don't revert iter for -EIOCBQUEUED
When block drivers or the core block code perform allocations with a
frozen queue, this could try to recurse into the block device to
reclaim memory and deadlock. Thus all allocations done by a process
that froze a queue need to be done without __GFP_IO and __GFP_FS.
Instead of tying to track all of them down, force a noio scope as
part of freezing the queue.
Note that nvme is a bit of a mess here due to the non-owner freezes,
and they will be addressed separately.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250131120352.1315351-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche