3381d7b2b3
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the MSI
interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts, which
causes device interrupts to be delivered to a single CPU. That obviously is
counterproductive for multi-queue devices and interrupt balancing.
To work around this limitation the new infrastructure installs a dummy
irq_set_affinity() callback which captures the affinity mask and picks a
redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a new
handling function in the core, which either runs the interrupt handler in
the context of the target CPU or delegates it to irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host controller
driver.
This allows affinity control for the subordinate device MSI interrupts
instead of being randomly executed on the CPU which runs the demultiplex
handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such a
device is assigned an MSI address higher than what's supported.
With the binary 64-bit flag there is no other choice than disabling 64-bit
MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and radeon
drivers to enable them on affected platforms.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=SCSQ
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
|
||
|---|---|---|
| .. | ||
| arcnet | ||
| bonding | ||
| caif | ||
| can | ||
| dsa | ||
| ethernet | ||
| fddi | ||
| fjes | ||
| hamradio | ||
| hippi | ||
| hyperv | ||
| ieee802154 | ||
| ipa | ||
| ipvlan | ||
| mctp | ||
| mdio | ||
| netdevsim | ||
| ovpn | ||
| pcs | ||
| phy | ||
| plip | ||
| ppp | ||
| pse-pd | ||
| slip | ||
| team | ||
| thunderbolt | ||
| usb | ||
| vmxnet3 | ||
| vxlan | ||
| wan | ||
| wireguard | ||
| wireless | ||
| wwan | ||
| xen-netback | ||
| Kconfig | ||
| LICENSE.SRC | ||
| Makefile | ||
| Space.c | ||
| amt.c | ||
| bareudp.c | ||
| dummy.c | ||
| eql.c | ||
| geneve.c | ||
| gtp.c | ||
| ifb.c | ||
| loopback.c | ||
| macsec.c | ||
| macvlan.c | ||
| macvtap.c | ||
| mdio.c | ||
| mhi_net.c | ||
| mii.c | ||
| net_failover.c | ||
| netconsole.c | ||
| netkit.c | ||
| nlmon.c | ||
| ntb_netdev.c | ||
| pfcp.c | ||
| rionet.c | ||
| sungem_phy.c | ||
| tap.c | ||
| tun.c | ||
| tun_vnet.h | ||
| veth.c | ||
| virtio_net.c | ||
| vrf.c | ||
| vsockmon.c | ||
| xen-netfront.c | ||