* Samsung Exynos ACPM:
* Populate child platform devices from device tree data
* Introduce a new API, `devm_acpm_get_by_node()`, for child devices to get the ACPM handle
* ROHM PMICs:
* Add support for the ROHM BD96802 scalable companion PMIC to the BD96801 core driver
* Add support for controlling the BD96802 using the BD96801 regulator driver
* Add support to the BD96805, which is almost identical to the BD96801
* Add support to the BD96806, which is similar to the BD96802
* Maxim MAX77759:
* Add a core driver for the MAX77759 companion PMIC
* Add a GPIO driver for the expander functions on the MAX77759
* Add an NVMEM driver to expose the non-volatile memory on the MAX77759
* STMicroelectronics STM32MP25:
* Add support for the STM32MP25 SoC to the stm32-lptimer
* Add support for the STM32MP25 to the clocksource driver, handling new register access requirements
* Add support for the STM32MP25 to the PWM driver, enabling up to two PWM outputs
* Broadcom BCM590xx:
* Add support for the BCM59054 PMU
* Parse the PMU ID and revision to support behavioral differences between chip revisions
* Add regulator support for the BCM59054
* Samsung S2MPG10:
* Add support for the S2MPG10 PMIC, which communicates via the Samsung ACPM firmware instead of I2C
* Exynos ACPM:
* Improve timeout detection reliability by using ktime APIs instead of a loop counter assumption
* Allow PMIC access during late system shutdown by switching to `udelay()` instead of a sleeping function
* Fix an issue where reading command results longer than 8 bytes would fail
* Silence non-error `-EPROBE_DEFER` messages during boot to clean up logs
* Exynos LPASS:
* Fix an error handling path by switching to `devm_regmap_init_mmio()` to prevent resource leaks
* Fix a bug where `exynos_lpass_disable()` was called twice in the remove function
* Fix another resource leak in the probe's error path by using `devm_add_action_or_reset()`
* Samsung SEC:
* Handle the s2dos05, which does not have IRQ support, explicitly to prevent warnings
* Fix the core driver to correctly handle errors from `sec_irq_init()` instead of ignoring them
* STMPE-SPI:
* Correct an undeclared identifier in the `MODULE_DEVICE_TABLE` macro
* MAINTAINERS:
* Adjust a file path for the Siemens IPC LED drivers entry to fix a broken reference
* Maxim Drivers:
* Correct the spelling of "Electronics" in Samsung copyright headers across multiple files
* General:
* Fix wakeup source memory leaks on device unbind for 88pm886, as3722, max14577, max77541, max77705,
max8925, rt5033, and sprd-sc27xx drivers
* Samsung SEC Drivers:
* Split the driver into a transport-agnostic core (`sec-core`) and transport-specific (`sec-i2c`,
`sec-acpm`) modules to support non-I2C devices
* Merge the `sec-core` and `sec-irq` modules to reduce memory consumption
* Move internal APIs to a private header to clean up the public API
* Improve code style by sorting includes, cleaning up headers, sorting device tables, and using helper
macros like `dev_err_probe()`, `MFD_CELL`, and `REGMAP_IRQ_REG`
* Make regmap configuration for s2dos05/s2mpu05 explicit to improve clarity
* Rework platform data and regmap instantiation to use OF match data instead of a large switch statement
* ROHM BD96801/2:
* Prepare the driver for new models by separating chip-specific data into its own structure
* Drop IC name prefix from IRQ resource names in both the MFD and regulator drivers for simplification
* Broadcom BCM590xx:
* Refactor the regulator driver to store descriptions in a table to ease support for new chips
* Rename BCM59056-specific data to prepare for the addition of other regulators
* Use `dev_err_probe()` for cleaner error handling
* Exynos ACPM:
* Correct kerneldoc warnings and use the conventional 'np' argument name
* General MFD:
* Convert `aat2870` and `tps65010` to use the per-client debugfs directory provided by the I2C core
* Convert `sm501`, `tps65010` and `ucb1x00` to use the new GPIO line value setter callbacks
* Constify `regmap_irq_chip` and other structures in `88pm886` to move data to read-only sections
* BCM590xx:
* Drop the unused "id" member from the `bcm590xx` struct in preparation for a replacement
* Samsung SEC Core:
* Remove forward declarations for functions that no longer exist
* SM501:
* Remove the unused `sm501_find_clock()` function
* New Compatibles:
* Google: Add a PMIC child node to the `google,gs101-acpm-ipc` binding
* ROHM: Add new bindings for `rohm,bd96802-regulator` and `rohm,bd96802-pmic`, and add compatibles
for BD96805 and BD96806
* Maxim: Add new bindings for `maxim,max77759-gpio`, `maxim,max77759-nvmem`, and the top-level
`maxim,max77759`
* STM: Add `stm32mp25` compatible to the `stm32-lptimer` binding
* Broadcom: Add `bcm59054` compatible
* Atmel/Microchip: Add `microchip,sama7d65-gpbr` and `microchip,sama7d65-secumod` compatibles
* Samsung: Add `s2mpg10` compatible to the `samsung,s2mps11` MFD binding
* MediaTek: Add compatibles for `mt6893` (scpsys), `mt7988-topmisc`, and `mt8365-infracfg-nao`
* Qualcomm: Add `qcom,apq8064-mmss-sfpb` and `qcom,apq8064-sps-sic` syscon compatibles
* Refactoring & Cleanup:
* Convert Broadcom BCM59056 devicetree bindings to YAML and split them into MFD and regulator parts
* Convert the Microchip AT91 secumod binding to YAML
* Drop unrelated consumer nodes from binding examples to reduce bloat
* Correct indentation and style in various DTS examples
-----BEGIN PGP SIGNATURE-----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=hiAm
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Samsung Exynos ACPM:
- Populate child platform devices from device tree data
- Introduce a new API, 'devm_acpm_get_by_node()', for child devices
to get the ACPM handle
ROHM PMICs:
- Add support for the ROHM BD96802 scalable companion PMIC to the
BD96801 core driver
- Add support for controlling the BD96802 using the BD96801 regulator
driver
- Add support to the BD96805, which is almost identical to the
BD96801
- Add support to the BD96806, which is similar to the BD96802
Maxim MAX77759:
- Add a core driver for the MAX77759 companion PMIC
- Add a GPIO driver for the expander functions on the MAX77759
- Add an NVMEM driver to expose the non-volatile memory on the
MAX77759
STMicroelectronics STM32MP25:
- Add support for the STM32MP25 SoC to the stm32-lptimer
- Add support for the STM32MP25 to the clocksource driver, handling
new register access requirements
- Add support for the STM32MP25 to the PWM driver, enabling up to two
PWM outputs
Broadcom BCM590xx:
- Add support for the BCM59054 PMU
- Parse the PMU ID and revision to support behavioral differences
between chip revisions
- Add regulator support for the BCM59054
Samsung S2MPG10:
- Add support for the S2MPG10 PMIC, which communicates via the
Samsung ACPM firmware instead of I2C
Exynos ACPM:
- Improve timeout detection reliability by using ktime APIs instead
of a loop counter assumption
- Allow PMIC access during late system shutdown by switching to
'udelay()' instead of a sleeping function
- Fix an issue where reading command results longer than 8 bytes
would fail
- Silence non-error '-EPROBE_DEFER' messages during boot to clean up
logs
Exynos LPASS:
- Fix an error handling path by switching to
'devm_regmap_init_mmio()' to prevent resource leaks
- Fix a bug where 'exynos_lpass_disable()' was called twice in the
remove function
- Fix another resource leak in the probe's error path by using
'devm_add_action_or_reset()'
Samsung SEC:
- Handle the s2dos05, which does not have IRQ support, explicitly to
prevent warnings
- Fix the core driver to correctly handle errors from
'sec_irq_init()' instead of ignoring them
STMPE-SPI:
- Correct an undeclared identifier in the 'MODULE_DEVICE_TABLE' macro
MAINTAINERS:
- Adjust a file path for the Siemens IPC LED drivers entry to fix a
broken reference
Maxim Drivers:
- Correct the spelling of "Electronics" in Samsung copyright headers
across multiple files
General:
- Fix wakeup source memory leaks on device unbind for 88pm886,
as3722, max14577, max77541, max77705, max8925, rt5033, and
sprd-sc27xx drivers
Samsung SEC Drivers:
- Split the driver into a transport-agnostic core ('sec-core') and
transport-specific ('sec-i2c', 'sec-acpm') modules to support
non-I2C devices
- Merge the 'sec-core' and 'sec-irq' modules to reduce memory
consumption
- Move internal APIs to a private header to clean up the public API
- Improve code style by sorting includes, cleaning up headers,
sorting device tables, and using helper macros like
'dev_err_probe()', 'MFD_CELL', and 'REGMAP_IRQ_REG'
- Make regmap configuration for s2dos05/s2mpu05 explicit to improve
clarity
- Rework platform data and regmap instantiation to use OF match data
instead of a large switch statement
ROHM BD96801/2:
- Prepare the driver for new models by separating chip-specific data
into its own structure
- Drop IC name prefix from IRQ resource names in both the MFD and
regulator drivers for simplification
Broadcom BCM590xx:
- Refactor the regulator driver to store descriptions in a table to
ease support for new chips
- Rename BCM59056-specific data to prepare for the addition of other
regulators
- Use 'dev_err_probe()' for cleaner error handling
Exynos ACPM:
- Correct kerneldoc warnings and use the conventional 'np' argument
name
General MFD:
- Convert 'aat2870' and 'tps65010' to use the per-client debugfs
directory provided by the I2C core
- Convert 'sm501', 'tps65010' and 'ucb1x00' to use the new GPIO line
value setter callbacks
- Constify 'regmap_irq_chip' and other structures in '88pm886' to
move data to read-only sections
BCM590xx:
- Drop the unused "id" member from the 'bcm590xx' struct in
preparation for a replacement
Samsung SEC Core:
- Remove forward declarations for functions that no longer exist
SM501:
- Remove the unused 'sm501_find_clock()' function
New Compatibles:
- Google: Add a PMIC child node to the 'google,gs101-acpm-ipc'
binding
- ROHM: Add new bindings for 'rohm,bd96802-regulator' and
'rohm,bd96802-pmic', and add compatibles for BD96805 and BD96806
- Maxim: Add new bindings for 'maxim,max77759-gpio',
'maxim,max77759-nvmem', and the top-level 'maxim,max77759'
- STM: Add 'stm32mp25' compatible to the 'stm32-lptimer' binding
- Broadcom: Add 'bcm59054' compatible
- Atmel/Microchip: Add 'microchip,sama7d65-gpbr' and
'microchip,sama7d65-secumod' compatibles
- Samsung: Add 's2mpg10' compatible to the 'samsung,s2mps11' MFD
binding
- MediaTek: Add compatibles for 'mt6893' (scpsys), 'mt7988-topmisc',
and 'mt8365-infracfg-nao'
- Qualcomm: Add 'qcom,apq8064-mmss-sfpb' and 'qcom,apq8064-sps-sic'
syscon compatibles
Refactoring & Cleanup:
- Convert Broadcom BCM59056 devicetree bindings to YAML and split
them into MFD and regulator parts
- Convert the Microchip AT91 secumod binding to YAML
- Drop unrelated consumer nodes from binding examples to reduce bloat
- Correct indentation and style in various DTS examples"
* tag 'mfd-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (81 commits)
mfd: maxim: Correct Samsung "Electronics" spelling in copyright headers
mfd: maxim: Correct Samsung "Electronics" spelling in headers
mfd: sm501: Remove unused sm501_find_clock
mfd: 88pm886: Constify struct regmap_irq_chip and some other structures
dt-bindings: mfd: syscon: Add mediatek,mt8365-infracfg-nao
mfd: sprd-sc27xx: Fix wakeup source leaks on device unbind
mfd: rt5033: Fix wakeup source leaks on device unbind
mfd: max8925: Fix wakeup source leaks on device unbind
mfd: max77705: Fix wakeup source leaks on device unbind
mfd: max77541: Fix wakeup source leaks on device unbind
mfd: max14577: Fix wakeup source leaks on device unbind
mfd: as3722: Fix wakeup source leaks on device unbind
mfd: 88pm886: Fix wakeup source leaks on device unbind
dt-bindings: mfd: Correct indentation and style in DTS example
dt-bindings: mfd: Drop unrelated nodes from DTS example
dt-bindings: mfd: syscon: Add qcom,apq8064-sps-sic
dt-bindings: mfd: syscon: Add qcom,apq8064-mmss-sfpb
mfd: stmpe-spi: Correct the name used in MODULE_DEVICE_TABLE
dt-bindings: mfd: syscon: Add mt7988-topmisc
mfd: exynos-lpass: Fix another error handling path in exynos_lpass_probe()
...
69352bd52b