114 lines
2.8 KiB
YAML
114 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/lontium,lt8713sx.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Lontium LT8713SX Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0/DP++ bridge-hub
|
|
|
|
maintainers:
|
|
- Vishnu Saini <vishnu.saini@oss.qualcomm.com>
|
|
|
|
description:
|
|
The Lontium LT8713SX is a Type-C/DP1.4 to Type-C/DP1.4/HDMI2.0 converter
|
|
that integrates one DP input and up to three configurable output interfaces
|
|
(DP1.4 / HDMI2.0 / DP++), with SST/MST functionality and audio support.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- lontium,lt8713sx
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
vcc-supply:
|
|
description: Regulator for 3.3V vcc.
|
|
|
|
vdd-supply:
|
|
description: Regulator for 1.1V vdd.
|
|
|
|
reset-gpios:
|
|
description: GPIO connected to active low RESET pin.
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
DP port for DP input from soc to bridge chip
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
DP port for DP output from bridge
|
|
|
|
port@2:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Additional DP port for DP output from bridge
|
|
|
|
port@3:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Additional DP port for DP output from bridge
|
|
|
|
required:
|
|
- port@0
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bridge@4f {
|
|
compatible = "lontium,lt8713sx";
|
|
reg = <0x4f>;
|
|
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
lt8713sx_dp_in: endpoint {
|
|
remote-endpoint = <&mdss_dp0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
lt8713sx_dp0_out: endpoint {
|
|
remote-endpoint = <&dp0_connector_in>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
lt8713sx_dp1_out: endpoint {
|
|
remote-endpoint = <&dp1_connector_in>;
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
lt8713sx_dp2_out: endpoint {
|
|
remote-endpoint = <&dp2_connector_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|