This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
-----BEGIN PGP SIGNATURE-----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=3psf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7iP3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.18
This tag contains two DT binding header changes that are shared with
the clk tree.
In this cycle we gained support for the MCU PRCM clock and reset
controller on the A523/A527/T527 family of SoCs, the NPU which is a
Vivante GC9000 IP block, and the NPU clock that was missing. The other
PRCM clock controller gained default bus clock rate settings. These
were not configured in the upstream U-boot bootloader, leading to them
running at slower rates. The assigned rates are from the user manual.
There is also a new board, the NetCube Systems Nagami SoM and two of
its carrier boards.
The A523 family development boards now have their internal RTC clocks
configured correctly, so that the RTC does not drift wildly. The missing
functions for the AXP717 on these boards are added. Missing reset GPIOs
and delays for Ethernet PHYs are added. Last, the Cubie A5E now has its
LEDs described and usable.
An overlay for the Orange Pi Zero interface (addon) board was added.
This can be used with the Orange Pi Zero and Zero Plus 2. Default audio
routing for these two boards (to be used with the addon) were added to
complement the overlay.
* tag 'sunxi-dt-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: sun55i: Complete AXP717A sub-functions
arm64: dts: allwinner: t527: orangepi-4a: hook up external 32k crystal
arm64: dts: allwinner: t527: avaota-a1: hook up external 32k crystal
arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal
arm64: dts: sun55i: a523: Assign standard clock rates to PRCM bus clocks
ARM: dts: sunxi: add support for NetCube Systems Nagami Keypad Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami Basic Carrier
ARM: dts: sunxi: add support for NetCube Systems Nagami SoM
riscv: dts: allwinner: d1s-t113: Add pinctrl's required by NetCube Systems Nagami SoM
dt-bindings: arm: sunxi: Add NetCube Systems Nagami SoM and carrier board bindings
ARM: dts: allwinner: Add Orange Pi Zero Interface Board overlay
ARM: dts: allwinner: orangepi-zero-plus2: Add default audio routing
ARM: dts: allwinner: orangepi-zero: Add default audio routing
arm64: dts: allwinner: a523: Add NPU device node
arm64: dts: allwinner: a523: Add MCU PRCM CCU node
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
arm64: dts: allwinner: t527: avaota-a1: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add ethernet PHY reset setting
arm64: dts: allwinner: a527: cubie-a5e: Add LEDs
Link: https://lore.kernel.org/r/aMrtuZg8HlR--TAt@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
17752efeca