Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
Mostly DT bindings additions this time because Andi was super busy and I
also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates
- add the compatible for Giantec GT24C256C to the device-tree bindings
-----BEGIN PGP SIGNATURE-----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=LsC5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder API
to other in-kernel users (to enable merging of a new pinctrl driver
that uses it)
- convert all remaining drivers to using the modernized generic GPIO chip
API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve its
support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO drivers
that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled with
COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding
-----BEGIN PGP SIGNATURE-----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=TZ1G
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
Add SMBus IDs on Intel Wildcat Lake-U.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
While applying the patch for commit ede965fd55 ("i2c: rtl9300: remove
broken SMBus Quick operation support"), a conflict was incorrectly solved
by adding the I2C_FUNC_SMBUS_I2C_BLOCK feature flag. But the code to handle
I2C_SMBUS_I2C_BLOCK_DATA requests will be added by a separate commit.
Fixes: ede965fd55 ("i2c: rtl9300: remove broken SMBus Quick operation support")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
dt-bindings:
- add support for MediaTek MT6878 I2C
- Drp[ support fpr S3C2410
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaNe9/xYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uWdwA/jaO8/KVNXt349PdX9B1D5HBQea4
jsJgi1W/5lqi0MLjAQDQHsKfa35M8RONSeVnHXS7BNdRpWQDtiHgxaks0tXmDA==
=1RHN
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18
- Add support for MediaTek MT6878 I2C
- Drop support for S3C2410
After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.
Fixes: 7272194ed3 ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When the driver is removed, the clocks are first enabled by
calling pm_runtime_get_sync(), and then disabled with
pm_runtime_put_sync().
If CONFIG_PM=y, clocks for this controller are disabled when it's in
the idle state. So the clocks are properly disabled when the driver
exits.
Othewise, the clocks are always enabled and the PM functions have
no effect. Therefore, the driver exits without disabling the clocks.
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
18
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/bind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
# echo 1214a000.i2c > /sys/bus/platform/drivers/i2c_designware/unbind
# cat /sys/kernel/debug/clk/clk-pclk/clk_enable_count
20
To ensure that the clocks can be disabled correctly even without
CONFIG_PM=y, should add the following fixes:
- Replace with pm_runtime_put_noidle(), which only decrements the runtime
PM usage count.
- Call i2c_dw_prepare_clk(false) to explicitly disable the clocks.
Fixes: 7272194ed3 ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Refactor boolean field assignments of the form `if (a) b = true` to
`b = !!(a)` in i2c_mux_alloc.
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add calls to dev_err_probe() on error paths that can return
-EPROBE_DEFER when probing platform device. Namely when requesting the
reset controller, when probing for lock support and when requesting the
clocks.
PCI device probing already use dev_err_probe().
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Simplify the error handling of devm_request_irq() in
i2c_dw_probe_master() and i2c_dw_probe_slave() by converting to:
return dev_err_probe();
instead of calling:
dev_err();
return ret;
This also handle deferred probe error without spamming the log.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
After performing a conditional bus reset, the controller must ensure
that the SDA line is actually released.
Previously, the reset routine only performed a single check,
which could leave the bus in a locked state in some situations.
This patch introduces a loop that toggles the reset cycle and issues
a reset request up to SPACEMIT_BUS_RESET_CLK_CNT_MAX times, checking
SDA after each attempt. If SDA is released before the maximum count,
the function returns early. Otherwise, a warning is emitted.
This change improves bus recovery reliability.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
After calling spacemit_i2c_conditionally_reset_bus(),
the controller should ensure that the SDA line is release
before proceeding.
Previously, the driver checked the SCL line instead,
which does not guarantee that the bus is truly idle.
This patch changes the check to verify SDA. This ensures
proper bus recovery and avoids potential communication errors
after a conditional reset.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The K1 I2C controller has an SDA glitch fix that introduces a small
delay on restart signals. While this feature can suppress glitches
on SDA when SCL = 0, it also delays the restart signal, which may
cause unexpected behavior in some transfers.
The glitch itself does not affect normal I2C operation, because
the I2C specification allows SDA to change while SCL is low.
To ensure correct transmission for every message, we disable the
SDA glitch fix by setting the RCR.SDA_GLITCH_NOFIX bit during
initialization.
This guarantees that restarts are issued promptly without
unintended delays.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Previously, STOP handling was split into two separate steps:
1) clear TB/STOP/START/ACK bits
2) issue STOP by calling spacemit_i2c_stop()
This left a small window where the control register was updated
twice, which can confuse the controller. While this race has not
been observed with interrupt-driven transfers, it reliably causes
bus errors in PIO mode.
Inline the STOP sequence into the IRQ handler and ensure that
control register bits are updated atomically in a single writel().
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
spacemit_i2c_wait_bus_idle() only returns 0 on success or a negative
error code on failure.
Since 'ret' can never be positive, the final 'else' branch was
unreachable, and spacemit_i2c_check_bus_release() was never called.
This commit guarantees we attempt to release the bus whenever waiting for
an idle bus fails.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The old IC does not support the I2C_MASTER_WRRD (write-then-read)
function, but the current code’s handling of i2c->auto_restart may
potentially lead to entering the I2C_MASTER_WRRD software flow,
resulting in unexpected bugs.
Instead of repurposing the auto_restart flag, add a separate flag
to signal I2C_MASTER_WRRD operations.
Also fix handling of msgs. If the operation (i2c->op) is
I2C_MASTER_WRRD, then the msgs pointer is incremented by 2.
For all other operations, msgs is simply incremented by 1.
Fixes: b2ed11e224 ("I2C: mediatek: Add driver for MediaTek MT8173 I2C controller")
Signed-off-by: Leilk.Liu <leilk.liu@mediatek.com>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Annotate two places in boardinfo code:
- __i2c_first_dynamic_bus_num is set in init phase. Annotate it as
__ro_after_init to prevent later changes.
- i2c_register_board_info() is used in init phase only, so annotate it
as __init, allowing to free the memory after init phase.
This is safe, see comment: "done in board-specific init code near
arch_initcall() time"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Samsung S3C2410 SoC was removed from the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of "samsung,s3c2410-i2c" compatible.
However, there is still a user of "s3c2410-i2c" platform device ID,
S3C64xx platform, so that part needs to stay.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250830103601.82046-3-krzysztof.kozlowski@linaro.org
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
-----BEGIN PGP SIGNATURE-----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=TulG
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=JuVO
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm device driver updates for v6.18
Introduce support for loading firmware into the QUP serial engines from
Linux, which allows deferring selection of which protocol (uart, i2c,
spi, etc) a given SE should have until the OS loads.
Also introduce the "object invoke" interface in the SCM driver, to
provide interface to the Qualcomm TEE driver.
* tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
firmware: qcom: scm: add support for object invocation
firmware: qcom: tzmem: export shm_bridge create/delete
Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The MR1.CKS field is 3 bits wide and all the possible values (from 0 to
7) are valid. This is true for all the SoCs currently integrated in
upstream Linux. Take into account CKS=7 which allows setting bus
frequencies lower than 50KHz. This may be useful at least for debugging.
Fixes: d982d66514 ("i2c: riic: remove clock and frequency restrictions")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
-----BEGIN PGP SIGNATURE-----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=DW3r
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-hwmon-i2c-can-rtc-watchdog-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, HWMON, I2C,
CAN, RTC and Watchdog trees containing GPIO support for Nuvoton NCT6694.
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface.
Each I2C controller uses the default baudrate of 100kHz, which
can be overridden via module parameters.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-4-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This update includes:
- basic infrastructure support for Microchip LAN969x SoC
- SoC ARCH symbols (existing SparX-5, new LAN969x) under the
ARCH_MICROCHIP hidden symbol (already in use by AT91 in 6.17)
- addition of that new symbol for drivers that are shared by
Microchip SoC-s now and in the future
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCaMgFkQAKCRAfOrpwrNPN
DFEbAQDg6iMOzL+C2tqu9eTfBZv9DCKcbfVFeHnwGqSbH8L/WgD/ZOq4UKIBMXpA
MGtwDDkDKBPVv3clF461/nS+VtAOaAE=
=upTs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zZ1l
-----END PGP SIGNATURE-----
Merge tag 'microchip-soc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip ARM64 SoC updates for v6.18:
This update includes:
- basic infrastructure support for Microchip LAN969x SoC
- SoC ARCH symbols (existing SparX-5, new LAN969x) under the
ARCH_MICROCHIP hidden symbol (already in use by AT91 in 6.17)
- addition of that new symbol for drivers that are shared by
Microchip SoC-s now and in the future
* tag 'microchip-soc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
crypto: atmel-aes: make it selectable for ARCH_MICROCHIP
char: hw_random: atmel: make it selectable for ARCH_MICROCHIP
i2c: at91: make it selectable for ARCH_MICROCHIP
spi: atmel: make it selectable for ARCH_MICROCHIP
tty: serial: atmel: make it selectable for ARCH_MICROCHIP
mfd: at91-usart: Make it selectable for ARCH_MICROCHIP
arm64: lan969x: Add support for Microchip LAN969x SoC
arm64: Add config for Microchip SoC platforms
Link: https://lore.kernel.org/r/20250915123548.13722-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add compatible and the hardware struct for Tegra256. Tegra256 controllers
use a different parent clock. Hence the timing parameters are different
from the previous generations to meet the expected frequencies.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Starting with commit f99508074e ("PM: domains: Detach on
device_unbind_cleanup()"), there is no longer a need to call
dev_pm_domain_detach() in the bus remove function. The
device_unbind_cleanup() function now handles this to avoid
invoking devres cleanup handlers while the PM domain is
powered off, which could otherwise lead to failures as
described in the above-mentioned commit.
Drop the explicit dev_pm_domain_detach() call and rely instead
on the flags passed to dev_pm_domain_attach() to power off the
domain.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Remove existing arbitration timeout macros and use I2C adapter timeout
value for arbitration timeout and forceful bus ownership.
I2C adapter timeout can be configurable from user space, so using it
for arbitration timeout helps in configuring the arbitration timeout
from user space depending on the use case.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Replace the manual __free(fwnode_handle) iterator declaration with the
new scoped iterator macro for cleaner, less error-prone code.
This eliminates the need for explicit iterator variable declaration with
the cleanup attribute, making the code more consistent with other scoped
iterator usage patterns in the kernel.
Signed-off-by: Jean-François Lessard <jefflessard3@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
LAN969x uses the Atmel TWI I2C, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Remove the SMBus Quick operation from this driver because it is not
natively supported by the hardware and is wrongly implemented in the
driver.
The I2C controllers in Realtek RTL9300 and RTL9310 are SMBus-compliant
but there doesn't seem to be native support for the SMBus Quick
operation. It is not explicitly mentioned in the documentation but
looking at the registers which configure an SMBus transaction, one can
see that the data length cannot be set to 0. This suggests that the
hardware doesn't allow any SMBus message without data bytes (except for
those it does on it's own, see SMBus Block Read).
The current implementation of SMBus Quick operation passes a length of
0 (which is actually invalid). Before the fix of a bug in a previous
commit, this led to a read operation of 16 bytes from any register (the
one of a former transaction or any other value.
This caused issues like soft-bricked SFP modules after a simple probe
with i2cdetect which uses Quick by default. Running this with SFP
modules whose EEPROM isn't write-protected, some of the initial bytes
are overwritten because a 16-byte write operation is executed instead of
a Quick Write. (This temporarily soft-bricked one of my DAC cables.)
Because SMBus Quick operation is obviously not supported on these
controllers (because a length of 0 cannot be set, even when no register
address is set), remove that instead of claiming there is support. There
also shouldn't be any kind of emulated 'Quick' which just does another
kind of operation in the background. Otherwise, specific issues occur
in case of a 'Quick' Write which actually writes unknown data to an
unknown register.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-4-jelonek.jonas@gmail.com
Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer'
to ensure the data length isn't within the supported range. In
particular a data length of 0 is not supported by the hardware and
causes unintended or destructive behaviour.
This limitation becomes obvious when looking at the register
documentation [1]. 4 bits are reserved for DATA_WIDTH and the value
of these 4 bits is used as N + 1, allowing a data length range of
1 <= len <= 16.
Affected by this is the SMBus Quick Operation which works with a data
length of 0. Passing 0 as the length causes an underflow of the value
due to:
(len - 1) & 0xf
and effectively specifying a transfer length of 16 via the registers.
This causes a 16-byte write operation instead of a Quick Write. For
example, on SFP modules without write-protected EEPROM this soft-bricks
them by overwriting some initial bytes.
For completeness, also add a quirk for the zero length.
[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-3-jelonek.jonas@gmail.com
Fix the current check for number of channels (child nodes in the device
tree). Before, this was:
if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)
RTL9300_I2C_MUX_NCHAN gives the maximum number of channels so checking
with '>=' isn't correct because it doesn't allow the last channel
number. Thus, fix it to:
if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)
Issue occured on a TP-Link TL-ST1008F v2.0 device (8 SFP+ ports) and fix
is tested there.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-2-jelonek.jonas@gmail.com
The expected on-wire format of an SMBus Block Write is
S Addr Wr [A] Comm [A] Count [A] Data [A] Data [A] ... [A] Data [A] P
Everything starting from the Count byte is provided by the I2C subsystem in
the array data->block. But the driver was skipping the Count byte
(data->block[0]) when sending it to the RTL93xx I2C controller.
Only the actual data could be seen on the wire:
S Addr Wr [A] Comm [A] Data [A] Data [A] ... [A] Data [A] P
This wire format is not SMBus Block Write compatible but matches the format
of an I2C Block Write. Simply adding the count byte to the buffer for the
I2C controller is enough to fix the transmission.
This also affects read because the I2C controller must receive the count
byte + $count * data bytes.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-4-cd9dca0db722@narfation.org
The timeout for transfers was only set to 2ms. Because of this relatively
low limit, 12-byte read operations to the frontend MCU of a RTL8239 POE PSE
chip cluster was consistently resulting in a timeout.
The original OpenWrt downstream driver [1] was not using any timeout limit
at all. This is also possible by setting the timeout_us parameter of
regmap_read_poll_timeout() to 0. But since the driver currently implements
the ETIMEDOUT error, it is more sensible to increase the timeout in such a
way that communication with the (quite common) Realtek I2C-connected POE
management solution is possible.
[1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-6.12/drivers/i2c/busses/i2c-rtl9300.c;h=c4d973195ef39dc56d6207e665d279745525fcac#l202
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-3-cd9dca0db722@narfation.org
The RTL93xx I2C controller has 4 32 bit registers to store the bytes for
the upcoming I2C transmission. The first byte is stored in the
least-significant byte of the first register. And the last byte in the most
significant byte of the last register. A map of the transferred bytes to
their order in the registers is:
reg 0: 0x04_03_02_01
reg 1: 0x08_07_06_05
reg 2: 0x0c_0b_0a_09
reg 3: 0x10_0f_0e_0d
The i2c_read() function basically demonstrates how the hardware would pick
up bytes from this register set. But the i2c_write() function was just
pushing bytes one after another to the least significant byte of a register
AFTER shifting the last one to the next more significant byte position.
If you would then have tried to send a buffer with numbers 1-11 using
i2c_write(), you would have ended up with following register content:
reg 0: 0x01_02_03_04
reg 1: 0x05_06_07_08
reg 2: 0x00_09_0a_0b
reg 3: 0x00_00_00_00
On the wire, you would then have seen:
Sr Addr Wr [A] 04 A 03 A 02 A 01 A 08 A 07 A 06 A 05 A 0b A 0a A 09 A P
But the correct data transmission was expected to be
Sr Addr Wr [A] 01 A 02 A 03 A 04 A 05 A 06 A 07 A 08 A 09 A 0a A 0b A P
Because of this multi-byte ordering problem, only single byte i2c_write()
operations were executed correctly (on the wire).
By shifting the byte directly to the correct end position in the register,
it is possible to avoid this incorrect byte ordering and fix multi-byte
transmissions.
The second initialization (to 0) of vals was also be dropped because this
array is initialized to 0 on the stack by using `= {};`. This makes the
fix a lot more readable.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Cc: <stable@vger.kernel.org> # v6.13+
Co-developed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-2-cd9dca0db722@narfation.org
The data->block[0] variable comes from user. Without proper check,
the variable may be very large to cause an out-of-bounds bug.
Fix this bug by checking the value of data->block[0] first.
1. commit 39244cc754 ("i2c: ismt: Fix an out-of-bounds bug in
ismt_access()")
2. commit 92fbb6d129 ("i2c: xgene-slimpro: Fix out-of-bounds bug in
xgene_slimpro_i2c_xfer()")
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Signed-off-by: Alex Guo <alexguo1023@gmail.com>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250810-i2c-rtl9300-multi-byte-v5-1-cd9dca0db722@narfation.org
If the channel selection or deselection times out, it indicates
a failure in the mux's I2C subsystem. Without sending a reset pulse,
a power-on-reset of the entire device would be required to restore
communication.
The datasheet specifies a minimum hold time of 4 ns for the reset
pulse, but due to the path's capacitance and themux having its own
clock, it is recommended to extend this to approximately 1 us.
Since reset controller is used, there is no need to take care of other
devices sharing the same reset line.
Signed-off-by: Wojciech Siudy <wojciech.siudy@nokia.com>
[wsa: removed superfluous prinout, unneeded braces and fixed indent]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fallback to legacy reset-gpios is no more needed, because the framework
can use reset-gpios properity now as well.
Signed-off-by: Wojciech Siudy <wojciech.siudy@nokia.com>
[wsa: fixed whitespace issue]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If an error occurs in the loop that creates the device adapters, then a
reference to 'dev' still needs to be released.
Use for_each_child_of_node_scoped() to both fix the issue and save one line
of code.
Fixes: d0f8e97866 ("i2c: muxes: add support for tsd,mule-i2c multiplexer")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaI3XghYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1u9moA/1bAEgLdl934yksPMliGIobJUj86
YuQHK0kloCsppJBVAP9o2pS7avHBeiPLJ89pwsMSu1s/yPm7NzO52Q/FYB3rCA==
=jmKU
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.17-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.17, part 2
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Update the I2C frequency table to match the recommended values
specified in the I2C hardware programming guide. In the current IPQ5424
configuration where 32MHz is the source clock, the I2C bus frequencies do
not meet expectations—for instance, 363KHz is achieved instead of the
expected 400KHz.
Fixes: 506bb2ab00 ("i2c: qcom-geni: Support systems with 32MHz serial engine clock")
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Cc: <stable@vger.kernel.org> # v6.13+
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250513-i2c-bus-freq-v1-1-9a333ad5757f@oss.qualcomm.com
Calling dma_sync_*() on a buffer from dma_alloc_coherent() is pointless.
The driver should not be doing its own bounce-buffering if the buffer is
allocated through dma_alloc_coherent().
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250710131206.2316-4-akhilrajeev@nvidia.com
Linus Torvalds