Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
* power-supply core
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new property for battery internal resistance
- add new property for battery state of health
* power-supply drivers
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr: add charge control support
- qcom_battmgr: add support for state of health and internal resistance
- max77705_charger: big driver cleanup
- max77705_charger: add support for setting charge current
- misc. minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=UcWZ
-----END PGP SIGNATURE-----
Merge tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new properties for battery internal resistance and state of
health
Power-supply drivers:
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr:
- add charge control support
- add support for state of health and internal resistance
- max77705_charger:
- big driver cleanup
- add support for setting charge current
- misc minor fixes and cleanups"
* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: qcom_battmgr: handle charging state change notifications
power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
power: supply: max77705_charger: rework interrupts
power: supply: max77705_charger: add writable properties
power: supply: max77705_charger: return error when config fails
power: supply: max77705_charger: use regfields for config registers
power: supply: max77705_charger: refactoring: rename charger to chg
mfd: max77705: max77705_charger: move active discharge setting to mfd parent
power: supply: max77976_charger: fix constant current reporting
power: supply: qcom_battmgr: Add charge control support
dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
power: supply: qcom_battmgr: Add state_of_health property
power: supply: qcom_battmgr: Add resistance power supply property
power: supply: core: Add state_of_health power supply property
power: supply: core: Add resistance power supply property
power: supply: rx51: remove redundant condition checks
dt-bindings: power: supply: bq24190: document charge enable pin
dt-bindings: power: supply: bq27xxx: document optional interrupt
power: supply: intel_dc_ti_battery: Drop no longer relevant comment
...
This round of updates contains a fair amount of new device support, a couple of fixes and
some refactoring. The most notable additions include new drivers for Loongson's Security
Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a refactoring to use a more modern
GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the
MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger.
New Support & Features
- Add a suite of drivers for the Loongson Security Engine, including the core controller, a
Random Number Generator (RNG) and Trusted Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD
cell registration, and a system power-off handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD
driver and a power supply driver for the charger functionality.
Improvements & Fixes
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent
potential silent failures.
Cleanups & Refactoring
- Add a MAINTAINERS entry for the new Loongson Security Engine drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API.
Removals
- Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and
touchscreen drivers.
Device Tree Bindings Updates
- Add device tree bindings for the TI BQ25703A charger.
-----BEGIN PGP SIGNATURE-----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=h21C
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder API
to other in-kernel users (to enable merging of a new pinctrl driver
that uses it)
- convert all remaining drivers to using the modernized generic GPIO chip
API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve its
support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO drivers
that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled with
COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding
-----BEGIN PGP SIGNATURE-----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=TZ1G
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
Extend the list of supported devices with the QIXIS FPGA found on the
LX2160ARDB board.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reorder the of_device_id structures so that they are in alphabetical
order.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Lee Jones <lee@kernel.org>
The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet
Page 725, Table 16.4. The address of all registers is offset by 0x1200,
making the proper address of MTU5 NFCR register be 0x895.
Cc: stable@vger.kernel.org
Fixes: 654c293e16 ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250910175914.12956-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Lee Jones <lee@kernel.org>
Current implementation describes only MFD's own topsys interrupts.
However, max77705 has a register which indicates interrupt source, i.e.
it acts as an interrupt controller. There's 4 interrupt sources in
max77705: topsys, charger, fuelgauge, usb type-c manager.
Setup max77705 MFD parent as an interrupt controller. Delete topsys
interrupts because currently unused.
Remove shared interrupt flag, because we're are an interrupt controller
now, and subdevices should request interrupts from us.
Fixes: c8d50f0297 ("mfd: Add new driver for MAX77705 PMIC")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250909-max77705-fix_interrupt_handling-v3-1-233c5a1a20b5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
As pm_runtime_force_suspend() will force the device state to suspend,
the driver needs to ensure no IRQ handlers are currently running. If not
those handlers may find they are now running on suspended hardware
despite holding a PM runtime reference. disable_irq() will sync any
currently running handlers, so move the IRQ disabling to cover the whole
of the forced suspend state to avoid such race conditions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250903094549.271068-6-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Since the display is a sub-function of the Loongson-2K BMC, when the
BMC reset, the entire BMC PCIe is disconnected, including the display
which is interrupted.
Quick overview of the entire LS2K BMC reset process:
There are two types of reset methods: soft reset (BMC-initiated reboot
of IPMI reset command) and BMC watchdog reset (watchdog timeout).
First, regardless of the method, an interrupt is generated (PCIe interrupt
for soft reset/GPIO interrupt for watchdog reset);
Second, during the interrupt process, the system enters bmc_reset_work,
clears the bus/IO/mem resources of the LS7A PCI-E bridge, waits for the BMC
reset to begin, then restores the parent device's PCI configuration space,
waits for the BMC reset to complete, and finally restores the BMC PCI
configuration space.
Display restoration occurs last.
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/de4e04b42ff9ee282f86f9bb9efbf959a9848205.1756987761.git.zhoubinbin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
The Loongson-2K Board Management Controller provides an PCIe interface
to the host to access the feature implemented in the BMC.
The BMC is assembled on a server similar to the server machine with
Loongson-3 CPU. It supports multiple sub-devices like DRM and IPMI.
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/0dc1fd53020ce2562453961ffed2cd9eb8f359e1.1756987761.git.zhoubinbin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
When an MFD device is added, a platform_device is allocated. If this
device is linked to a DT description, the corresponding OF node is linked
to the new platform device but the OF node's refcount isn't incremented.
As of_node_put() is called during the platform device release, it leads
to a refcount underflow.
Call of_node_get() to increment the OF node's refcount when the node is
linked to the newly created platform device.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250820-mfd-refcount-v1-1-6dcb5eb41756@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Enable support for the RTC and regulators found in the SpacemiT P1
PMIC. Support is implemented by the simple I2C MFD driver.
The P1 PMIC is normally implemented with the SpacemiT K1 SoC. This
PMIC provides 6 buck converters and 12 LDO regulators. It also
implements a switch, watchdog timer, real-time clock, and more.
Initially its RTC and regulators are supported.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/20250825172057.163883-3-elder@riscstar.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data. There are no in-tree users of
this driver, so nothing defines the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the backlight
and regulator portions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-15-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data:
drivers/mfd/si476x-i2c.c: In function 'si476x_core_start':
drivers/mfd/si476x-i2c.c:133:21: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
133 | if (gpio_is_valid(core->gpio_reset))
There are no in-tree users of this driver, so nothing defines
the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the radio and
sound portions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507231653.UFlH2dMO-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-14-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The only machine that still uses the old gpio number based interface
is the wlf_cragg_6410 board file. In order to remove the dependency
on the interfaces, add #ifdef blocks here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-13-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Use enable_irq_wake() and disable_irq_wake() instead of
calling low-level irq_set_irq_wake() with a parameter.
No functional changes.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250815100601.622923-1-zhao.xichao@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250807071932.4085458-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/pnd8qjym7td.a.out@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
We observed the initial probe of the da9063 failing in
da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
board. The problem originates in da9063_i2c_blockreg_read, which uses
a single bus transaction to turn the register page and then read a
register. On the bus, this should translate to a write to register 0,
followed by a read to the target register, separated by a repeated
start. However, we found that after the write to register 0, the
controller sometimes continues directly with the register address of
the read request, without sending the chip address or a repeated start
in between, which makes the read request invalid.
To fix this, separate turning the page and reading the register into
two separate transactions. This brings the initialization code in line
with the rest of the driver, which uses register maps (which to my
knowledge do not use repeated starts after turning the page). This has
been included in our kernel for several months and was recently
included in a shipped product. For us, it reliably fixes the issue,
and we have not observed any new issues.
While the underlying problem is probably with the i2c controller or
its driver, I still propose a change here in the interest of
robustness: First, I'm not sure this issue can be fixed on the
controller side, since there are other issues related to repeated
start which can't (AR# 60695, AR# 61664). Second, similar problems
might exist with other controllers.
Signed-off-by: Jens Kehne <jens.kehne@agilent.com>
Link: https://lore.kernel.org/r/20250804133754.3496718-1-jens.kehne@agilent.com
Signed-off-by: Lee Jones <lee@kernel.org>
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fd ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Now with guard(mutex) in place, we can make the function's structure
a bit easier to read, by removing the nested if-else-clauses.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
guard() makes sure that the mutex gets unlocked when the function returns
and thus removes the need for unlock gotos or similar mechanisms and
therefore allows for a simpler function structure.
So convert the qnap_mcu_exec function to use it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-4-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Commit 9e36775c22 ("mfd: kempld: Remove custom DMI matching code")
removes the ability to load the driver if no matching system DMI data
is found. Before this commit the driver could be loaded using
alternative methods such as ACPI or `force_device_id` in the absence
of a matching system DMI entry.
Restore this ability while keeping the refactored
`platform_device_info` table.
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/7d2c7e92253d851194a781720051536cca2722b8.camel@secunet.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add the TS233 compatible and affiliated driver data to qnap-mcu.
The TS233 is mostly similar to the TS433, except not having any of the
PCIe components, so there are only 2 drives.
The fan pwm-limits from the vendor-configuration also are the same
as for the ts433 variant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250730173423.1878599-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The QIXIS FPGA found on Layerscape boards such as LX2160AQDS, LS1028AQDS
etc deals with power-on-reset timing, muxing etc. Use the simple-mfd-i2c
as its core driver by adding its compatible string (already found in
some dt files). By using the simple-mfd-i2c driver, any child device
will have access to the i2c regmap created by it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250707153120.1371719-1-ioana.ciornei@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Active discharge setting is a part of MFD top level i2c device, hence
cannot be controlled by charger. Writing to MAX77705_PMIC_REG_MAINCTRL1
register from charger driver is a mistake.
Move active discharge setting to MFD parent driver.
Fixes: a6a494c8e3 ("power: supply: max77705: Add charger driver for Maxim 77705")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmjKiPoACgkQUa+KL4f8
d2FARw//ah5Lic56BNTe3PExXqZcTfPyJT2hgQRer7pMZAigXzAt2nF/oVGNkMTN
VAlrA7wb6979J0JMO4m+LfuBJE5vdsbmjSVL8IfVZuTBnTrlNwM1UEHXLlv4GPnI
4l3xVKEmS5AF0g6aLek2y2d1T2vgh7ErL94Lb4AbqPsskSPwrdhEeYEc/VEUQoHJ
rt8OfN4JrMVVYofFqlOuAUdrdyOQ4NKOZf8DPkmat3ZF4QEu/x8UDecBuzsmQv+t
UDhYdOgBKWW42y9q525lBglGO/r35gHFhbxvV0Z8LlLxBLlTlys9krm6obFDhIW3
VBciLBUGNmuL7OnqjvFjV/Z9sb253iz67xtLInwhMBI2/WcSOufTtCYJ8IrERnsE
mlwy6uWEuWoMH3qLT5z02NPjHC2p02LXfGXG37JRrOrPAr30gKbXt4iOEWz66wbU
J1phVsoy2KzbrhZL/pWUGazQyRkbmNATj10/nYGFNsOVLYhcxArIwyhjqITviH+H
L10OnCP3LYkKK120Mr4fTHqrXb72NVBHWr6RH3QT69gvUwEJulMnQ+mvMCyouh7t
7NidHorEBSwA8daHvgj6hw9WD6WeoBwlPV5t8ns766P0L/X7E5px3WDS22evFRha
n2+jNp0Grb8QDvl6r0oZe2kI+csrax5ZsndRNjyJpeo5stWAsjo=
=fwWe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, Input, Pinctrl
and PWM trees containing the GPIO driver for max7360.
-----BEGIN PGP SIGNATURE-----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=DW3r
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-hwmon-i2c-can-rtc-watchdog-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, HWMON, I2C,
CAN, RTC and Watchdog trees containing GPIO support for Nuvoton NCT6694.
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Nuvoton NCT6694 provides an USB interface to the host to
access its features.
Sub-devices can use the USB functions nct6694_read_msg() and
nct6694_write_msg() to issue a command. They can also request
interrupt that will be called when the USB device receives its
interrupt pipe.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
After a recent change that started using FIELD_GET() in tps6594-core.c,
there is an error when bitfield.h is not implicitly included, such as
when building allmodconfig for ARCH=hexagon:
drivers/mfd/tps6594-core.c:767:7: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
767 | if (FIELD_GET(TPS65224_MASK_EN_PB_VSENSE_CONFIG, pwr_on) == TPS65224_EN_SEL_PB ||
| ^
Explicitly include bitfield.h to resolve the errors.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d766ca01c2 ("mfd: tps6594: Add power button functionality")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202509032356.LGa5hygM-lkp@intel.com/
Link: https://lore.kernel.org/r/20250904-mfd-tps6594-core-fix-bitfield-h-v1-1-5d0f00cfe58f@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Linus Torvalds