First set of RISC-V updates for the v6.18 merge window, including:
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather than
open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if they
are available
- The ability to identity and communicate to userspace the presence of a
MIPS P8700-specific ISA extension, and to leverage its MIPS-specific PAUSE
implementation in cpu_relax()
- Several other miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=nK3D
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
Fix use of uninitialized variable in group validation code.
Fixes: 71396cfac9 ("perf/dwc_pcie: Support counting multiple lane events in parallel")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202509231223.gZsX6Eio-lkp@intel.com/
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
This patch adds support for L3C PMU v3. The v3 L3C PMU supports
an extended events space which can be controlled in up to 2 extra
address spaces with separate overflow interrupts. The layout
of the control/event registers are kept the same. The extended events
with original ones together cover the monitoring job of all transactions
on L3C.
The extended events is specified with `ext=[1|2]` option for the
driver to distinguish, like below:
perf stat -e hisi_sccl0_l3c0_0/event=<event_id>,ext=1/
Currently only event option using config bit [7, 0]. There's
still plenty unused space. Make ext using config [16, 17] and
reserve bit [15, 8] for event option for future extension.
With the capability of extra counters, number of counters for HiSilicon
uncore PMU could reach up to 24, the usedmap is extended accordingly.
The hw_perf_event::event_base is initialized to the base MMIO
address of the event and will be used for later control,
overflow handling and counts readout.
We still make use of the Uncore PMU framework for handling the
events and interrupt migration on CPU hotplug. The framework's
cpuhp callback will handle the event migration and interrupt
migration of orginial event, if PMU supports extended events
then the interrupt of extended events is migrated to the same
CPU choosed by the framework.
A new HID of HISI0215 is used for this version of L3C PMU.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Co-developed-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
The event register is configured using hisi_pmu::base directly since
only one address space is supported for L3C PMU. We need to extend if
events configuration locates in different address space. In order to
make preparation for such hardware, extract the event register
configuration to separate function using hw_perf_event::event_base as
each event's base address. Implement a private
hisi_uncore_ops::get_event_idx() callback for initialize the event_base
besides get the hardware index.
No functional changes intended.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Currently the tt_core's using config1's bit [7, 0] and can not be
extended. For some platforms there's more the 8 CPUs sharing the
L3 cache. So make tt_core use config2's bit [15, 0] and the remaining
bits in config2 is reserved for extension.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
L3C PMU has 4 filter options which are sharing perf_event_attr::config1.
Driver will check config1 to see whether a certain event has a filter
setting. It'll be incorrect if we make use of other bits in config1
for non-filter options. So check whether each filter options are set
directly in a separate function instead.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Version 1 and 2 of L3C PMU also use different HID. Make use of
struct acpi_device_id::driver_data for version specific information
rather than judge the version register. This will help to
simplify the probe process and also a bit easier for extension.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Currently Uncore PMU framework assume one PMU device only have one
interrupt and will help register the interrupt handler. It cannot
support a PMU with multiple interrupt resources. An uncore PMU may
have multiple interrupts that can share the same handler. Export
hisi_uncore_pmu_isr() to allow drivers register the irq handler by
their own routine.
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Event ID is only using the attr::config bit [7, 0] but we check the
event range using the whole 64bit field. It blocks the usage of the
rest field of attr::config. Relax the check by only using the
bit [7, 0].
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
This adds a new dynamic PMU to the Perf Events framework to program and
control the Uncore PMUs in Fujitsu chips.
This driver exports formatting and event information to sysfs so it can
be used by the perf user space tools with the syntaxes:
perf stat -e pci_iod0_pci0/ea-pci/ ls
perf stat -e pci_iod0_pci0/event=0x80/ ls
perf stat -e mac_iod0_mac0_ch0/ea-mac/ ls
perf stat -e mac_iod0_mac0_ch0/event=0x80/ ls
FUJITSU-MONAKA PMU Events Specification v1.1 URL:
https://github.com/fujitsu/FUJITSU-MONAKA
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Koichi Okuno <fj2767dz@fujitsu.com>
Signed-off-by: Will Deacon <will@kernel.org>
CMN S3's DTM offset is different between r0px and r1p0, and it
turns out this was not a error in the earlier documentation, but
does actually exist in the design. Lovely.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: d5d9696b03 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
For ternary operators in the form of "a ? true : false", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250828122510.30843-1-liaoyuanhong@vivo.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
MN (Miscellaneous Node) is a hybrid node in ARM CHI. It broadcasts the
following two types of requests: DVM operations and PCIe configuration.
MN PMU devices exist on both SCCL and SICL, so we named the MN pmu
driver after SCL (Super cluster) ID.
The MN PMU driver using the HiSilicon uncore PMU framework. And only
the event parameter is supported.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Adds the support for HiSilicon NoC (Network on Chip) PMU which
will be used to monitor the events on the system bus. The PMU
device will be named after the SCL ID (either Super CPU cluster
or Super IO cluster) and the index ID, just similar to other
HiSilicon Uncore PMUs. Below PMU formats are provided besides
the event:
- ch: the transaction channel (data, request, response, etc) which
can be used to filter the counting.
- tt_en: tracetag filtering enable. Just as other HiSilicon Uncore
PMUs the NoC PMU supports only counting the transactions with
tracetag.
The NoC PMU doesn't have an interrupt to indicate the overflow.
However we have a 64 bit counter which is large enough and it's
nearly impossible to overflow.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
PMCCNTR_EL0 is preferred for counting CPU_CYCLES under certain
conditions. Factor out the condition check to a separate function
for further extension. Add documents for better understanding.
No functional changes intended.
Reviewed-by: James Clark <james.clark@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
FEAT_SPE_EFT (optional from Armv9.4) adds mask bits for the existing
load, store and branch filters. It also adds two new filter bits for
SIMD and floating point with their own associated mask bits. The current
filters only allow OR filtering on samples that are load OR store etc,
and the new mask bits allow setting part of the filter to an AND, for
example filtering samples that are store AND SIMD. With mask bits set to
0, the OR behavior is preserved, so the unless any masks are explicitly
set old filters will behave the same.
Add them all and make them behave the same way as existing format bits,
hidden and return EOPNOTSUPP if set when the feature doesn't exist.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Expose an "event_filter" entry in the caps folder to inform user space
about which events can be filtered.
Change the return type of arm_spe_pmu_cap_get() from u32 to u64 to
accommodate the added event filter entry.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
FEAT_SPEv1p4 (optional from Armv8.8) adds some new filter bits and also
makes some previously available bits unavailable again e.g:
E[30], bit [30]
When FEAT_SPEv1p4 is _not_ implemented ...
Continuing to hard code the valid filter bits for each version isn't
scalable, and it also doesn't work for filter bits that aren't related
to SPE version. For example most bits have a further condition:
E[15], bit [15]
When ... and filtering on event 15 is supported:
Whether "filtering on event 15" is implemented or not is only
discoverable from the TRM of that specific CPU or by probing
PMSEVFR_EL1.
Instead of hard coding them, write all 1s to the PMSEVFR_EL1 register
and read it back to discover the RES0 bits. Unsupported bits are RAZ/WI
so should read as 0s.
For any hardware that doesn't strictly follow RAZ/WI for unsupported
filters: Any bits that should have been supported in a specific SPE
version but now incorrectly appear to be RES0 wouldn't have worked
anyway, so it's better to fail to open events that request them rather
than behaving unexpectedly. Bits that aren't implemented but also aren't
RAZ/WI will be incorrectly reported as supported, but allowing them to
be used is harmless.
Testing on N1SDP shows the probed RES0 bits to be the same as the hard
coded ones. The FVP with SPEv1p4 shows only additional new RES0 bits,
i.e. no previously hard coded RES0 bits are missing.
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
While Designware PCIe PMU allows to count only one time based event
at a time, it allows to count all the lane events simultaneously.
After the patch one is able to count a group of lane events:
$ perf stat -e '{dwc_rootport/tx_memory_write,lane=1/,dwc_rootport/rx_memory_read,lane=0/}' dd if=/dev/nvme0n1 of=/dev/null bs=1M count=1
Earlier the events wouldn't have been counted successfully.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
The arm_ccn_pmu_poll_period_us are more suitable for using
the us_to_ktime(). This can make the code more concise and
enhance readability.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add compatible string and related devtype for i.MX94 platform.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
We'll have PMUs don't have an interrupt to indicate the counter
overflow, but the Uncore PMU core assume all the PMUs have
interrupt. So handle this case in the core. The existing PMUs
won't be affected.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-7-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The supported event number range of each Uncore PMUs is provided by
each driver in hisi_pmu::check_event and out of range events
will be rejected. A later version with expanded event number range
needs to register the PMU with updated hisi_pmu::check_event
even if it's the only update, which means the expanded events
cannot be used unless the driver's updated. However the unsupported
events won't be counted by the hardware so we can relax the event
number check to allow the use the expanded events.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-6-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
SLLC v3 PMU has the following changes compared to previous version:
a) update the register layout
b) update the definition of SRCID_CTRL and TGTID_CTRL registers.
To be compatible with v2, we use maximum width (11 bits)
and mask the extra length for themselves.
c) remove latency events (driver does not need to be adapted).
SLLC v3 PMU is identified with HID HISI0264.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-5-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Make use of struct acpi_device_id::driver_data for version specific
information rather than judge the version register. This will help
to simplify the probe process and also a bit easier for extension.
Factor out SLLC register definition to struct hisi_sllc_pmu_regs.
No functional changes intended.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-4-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
HiSilicon DDRC v3 PMU has the different interrupt register offset
compared to the v2. Add device information of v3 PMU with ACPI
HID HISI0235.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Version 1 and 2 of DDRC PMU also use different HID. Make use of
struct acpi_device_id::driver_data for version specific information
rather than judge the version register. This will help to
simplify the probe process and also a bit easier for extension.
In order to support this extend struct hisi_pmu_dev_info for version
specific counter bits and event range.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250619125557.57372-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
NI-700 has a distinct PMU interrupt output for each Clock Domain,
however some integrations may still combine these together externally.
The initial driver didn't attempt to support this, in anticipation of a
more general solution for IRQ sharing between system PMU instances, but
that's still a way off, so let's make this intermediate step for now to
at least allow sharing IRQs within an individual NI instance.
Now that CPU affinity and migration are cleaned up, it's fairly
straightforward to adopt similar logic to arm-cmn, to identify CDs with
a common interrupt and loop over them directly in the handler.
Signed-off-by: Shouping Wang <allen.wang@hj-micro.com>
[ rm: Rework for affinity handling, cosmetics, new commit message ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/f62db639d3b54c959ec477db7b8ccecbef1ca310.1752256072.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Since overflow interrupts from the individual PMUs are infrequent and
unlikely to coincide, and we make no attempt to balance them across
CPUs anyway, there's really not much point tracking a separate CPU
affinity per PMU. Move the CPU affinity and hotplug migration up to
the NI instance level.
Tested-by: Shouping Wang <allen.wang@hj-micro.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/00b622872006c2f0c89485e343b1cb8caaa79c47.1752256072.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix several minor typo errors in comments:
- Remove duplicated word "a" in "a a VID / GroupID".
- Correct "Opcopdes" to "Opcodes" in CXL spec reference.
- Fix spelling of "implemnted" to "implemented".
Improves code readability and documentation consistency.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/r/20250624194350.109790-4-alok.a.tiwari@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>
The IRQ name format string used in devm_kasprintf() mistakenly included
a newline character "\n".
This could lead to confusing log output or misformatted names in sysfs
or debug messages.
This fix removes the newline to ensure proper IRQ naming.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/r/20250624194350.109790-3-alok.a.tiwari@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>
The previous code mistakenly swapped the count and size parameters.
This fix corrects the argument order in devm_kcalloc() to follow the
conventional count, size form, avoiding potential confusion or bugs.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/r/20250624194350.109790-2-alok.a.tiwari@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>
The minimum interval specified the PMSIDR_EL1.Interval field is a
hardware recommendation. However, this value is set by hardware designer
before the production. It is not actual hardware limitation but tools
currently have no way to test shorter periods.
This change relaxes the limitation by allowing any non-zero periods,
with simplifying code with clamp_t().
The downside is that small periods may increase the risk of AUX ring
buffer overruns. When an overrun occurs, the perf core layer will
trigger an irq work to disable the event and wake up the tool in user
space to read the trace data. After the tool finishes reading, it will
re-enable the AUX event.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250627163028.3503122-1-leo.yan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The ARMv9.2 architecture introduces the optional Branch Record Buffer
Extension (BRBE), which records information about branches as they are
executed into set of branch record registers. BRBE is similar to x86's
Last Branch Record (LBR) and PowerPC's Branch History Rolling Buffer
(BHRB).
BRBE supports filtering by exception level and can filter just the
source or target address if excluded to avoid leaking privileged
addresses. The h/w filter would be sufficient except when there are
multiple events with disjoint filtering requirements. In this case, BRBE
is configured with a union of all the events' desired branches, and then
the recorded branches are filtered based on each event's filter. For
example, with one event capturing kernel events and another event
capturing user events, BRBE will be configured to capture both kernel
and user branches. When handling event overflow, the branch records have
to be filtered by software to only include kernel or user branch
addresses for that event. In contrast, x86 simply configures LBR using
the last installed event which seems broken.
It is possible on x86 to configure branch filter such that no branches
are ever recorded (e.g. -j save_type). For BRBE, events with a
configuration that will result in no samples are rejected.
Recording branches in KVM guests is not supported like x86. However,
perf on x86 allows requesting branch recording in guests. The guest
events are recorded, but the resulting branches are all from the host.
For BRBE, events with branch recording and "exclude_host" set are
rejected. Requiring "exclude_guest" to be set did not work. The default
for the perf tool does set "exclude_guest" if no exception level
options are specified. However, specifying kernel or user events
defaults to including both host and guest. In this case, only host
branches are recorded.
BRBE can support some additional exception branch types compared to
x86. On x86, all exceptions other than syscalls are recorded as IRQ.
With BRBE, it is possible to better categorize these exceptions. One
limitation relative to x86 is we cannot distinguish a syscall return
from other exception returns. So all exception returns are recorded as
ERET type. The FIQ branch type is omitted as the only FIQ user is Apple
platforms which don't support BRBE. The debug branch types are omitted
as there is no clear need for them.
BRBE records are invalidated whenever events are reconfigured, a new
task is scheduled in, or after recording is paused (and the records
have been recorded for the event). The architecture allows branch
records to be invalidated by the PE under implementation defined
conditions. It is expected that these conditions are rare.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-4-e7775563036e@kernel.org
[will: Fix sparse warnings about mixed declarations and code.
Fix C99 comment syntax.]
Signed-off-by: Will Deacon <will@kernel.org>
PMU drivers should set .suppress_bind_attrs so that userspace is denied
the opportunity to pull the driver out from underneath an in-use PMU
(with predictably unpleasant consequences). Somehow both the CMN and NI
drivers have managed to miss this; put that right.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/acd48c341b33b96804a3969ee00b355d40c546e2.1751465293.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Arnd reports that Clang's aggressive inlining of arm_cmn_discover() can
lead to stack frame size warnings, and while we could simply prevent
such inlining to hide the issue, it seems more productive to actually
heed the warning and do something about the overall stack footprint.
The xp_region array is already rather large, and CMN_MAX_XPS might only
grow larger in future, however it only serves as a convenience to save
repeating the first level's worth of register reads in the second pass
of discovery. There's no performance concern here, and it only takes a
small tweak to the flow to re-extract the offsets instead of stashing
them, so let's just do that and save several hundred bytes of stack.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/e7dd41bf0f1b098e2e4b01ef91318a4b272abff8.1751046159.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Don't populate the read-only array mask on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250611133917.170888-1-colin.i.king@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
The current MODULE_DESCRIPTION only mentions CMN-600, but this driver
now supports several Arm mesh interconnects including CMN-650, CMN-700,
CI-700, and CMN-S3.
Update the MODULE_DESCRIPTION to reflect the expanded scope.
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Link: https://lore.kernel.org/r/20250522032122.949373-1-daizhiyuan@phytium.com.cn
Signed-off-by: Will Deacon <will@kernel.org>
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree.
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls.
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4.
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM guests
can reliably query the underlying CPU types from the VMM.
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code.
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected.
Memory management:
- Prevent BSS exports from being used by the early PI code.
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries.
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible.
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end of
the mapping operation.
- Extend mmap() randomisation for 52-bit virtual addresses (on par with
48-bit addressing) and remove limited support for randomisation of
the linear map.
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI.
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers.
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support.
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location.
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function.
Miscellaneous:
- Add some missing header inclusions to the CCA headers.
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical).
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree blob.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmg1uTgQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFv2CAC9S5OW0btOAo7V/LFBpLhJM3hdIV6Sn6N1
d/K5znuqPBG6VPfBrshaZltEl/C3U8KG4H8xrlX5cSo7CRuf3DgVBw3kiZ6ERZj6
1gnKR54juA1oWhcroPl0s76ETWj3N4gO036u2qOhWNAYflDunh1+bCIGJkG4H/yP
wqtWn974YUbad/zQJSbG3IMO1yvxZ/PsNpVF8HjyQ0/ZPWsYTscrhNQ0hWro17sR
CTcUaGxH4GrXW24EGNgkLB9aq67X2rtGGtaIlp5oFl8FuLklc7TYbPwJp8cPCTNm
0Sp0mpuR9M675pYIKoCI9m5twc46znRIKmbXi5LvPd77418y3jTf
=03N4
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
The throttle support has been added in the generic code. Remove
the driver-specific throttle support.
Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250520181644.2673067-10-kan.liang@linux.intel.com
The throttle support has been added in the generic code. Remove
the driver-specific throttle support.
Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250520181644.2673067-9-kan.liang@linux.intel.com
For all the complexity of handling affinity for CPU hotplug, what we've
apparently managed to overlook is that arm_cmn_init_irqs() has in fact
always been setting the *initial* affinity of all IRQs to CPU 0, not the
CPU we subsequently choose for event scheduling. Oh dear.
Cc: stable@vger.kernel.org
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250417074650.81561-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Linus Torvalds