Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EN7581 and AN7583 SoCs have different VIP definitions. Introduce
get_vip_port callback in airoha_eth_soc_data struct in order to take
into account EN7581 and AN7583 VIP register layout and definition
differences.
Introduce nbq parameter in airoha_gdm_port struct. At the moment nbq
is set statically to value previously used in airhoha_set_gdm2_loopback
routine and it will be read from device tree in subsequent patches.
Fixes: e4e5ce823b ("net: airoha: Add AN7583 SoC support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-7583-vip-fix-v1-1-c35e02b054bb@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration performed in
airoha_fe_init() is used to duplicate multicast packets and send a copy
to the CPU when the traffic is offloaded. This is necessary just if
it is requested by the user. Disable multicast packets duplication by
default.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha_fe_init_remove_mc_en_bit-v1-1-7b6a5a25a74d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove airoha_gdm_port dependency in ETS tc callback signatures and rely
on net_device pointer instead. Please note this patch does not introduce
any logical change and it is a preliminary patch in order to support
multiple net_devices connected to the same GDM3 or GDM4 port via an
external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-multi-serdes-preliminary-patch-v1-3-08d5b670ca8f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove airoha_gdm_port dependency in HTB tc callback signatures and rely
on net_device pointer instead. Please note this patch does not introduce
any logical change and it is a preliminary patch in order to support
multiple net_devices connected to the same GDM3 or GDM4 port via an
external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-multi-serdes-preliminary-patch-v1-2-08d5b670ca8f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove airoha_gdm_port dependency in airoha_dev_setup_tc_block routine
signature and rely on net_device pointer instead. Please note this patch
does not introduce any logical change and it is a preliminary patch to
support multiple net_devices connected to the GDM3 or GDM4 ports via an
external hw arbiter.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260412-airoha-multi-serdes-preliminary-patch-v1-1-08d5b670ca8f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the descriptor index written in REG_RX_CPU_IDX() is equal to the one
stored in REG_RX_DMA_IDX(), the hw will stop since the QDMA RX ring is
empty.
Add missing REG_RX_CPU_IDX() configuration in airoha_qdma_cleanup_rx_queue
routine during QDMA RX ring cleanup.
Fixes: 514aac3599 ("net: airoha: Add missing cleanup bits in airoha_qdma_cleanup_rx_queue()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260408-airoha-cpu-idx-airoha_qdma_cleanup_rx_queue-v1-1-8efa64844308@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_fe_set routine is used to set specified bits to 1 in the selected
register. In the FE_PSE_BUF_SET case this can due to a overestimation of
the required buffers for I/O queues since we can miss to set some bits
of PSE_ALLRSV_MASK subfield to 0. Fix the issue relying on airoha_fe_rmw
routine instead.
Fixes: 8e38e08f2c ("net: airoha: fix PSE memory configuration in airoha_fe_pse_ports_init()")
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260408-airoha-reg_fe_pse_buf_set-v1-1-0c4fa8f4d1d9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing dma_rmb() in airoha_qdma_rx_process routine to make sure the
DMA read operations are completed when the NIC reports the processing on
the current descriptor is done. Moreover, add missing READ_ONCE() in
airoha_qdma_rx_process() for DMA descriptor control fields in order to
avoid any compiler reordering.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260407-airoha_qdma_rx_process-fix-reordering-v3-1-91c36e9da31f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path.
Fixes: d6d2b0e153 ("net: airoha: Fix page recycling in airoha_qdma_rx_process()")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260402-airoha_qdma_rx_process-mem-leak-fix-v1-1-b5706f402d3c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is not necessary to update REG_RX_CPU_IDX register for each iteration
of the descriptor loop in airoha_qdma_fill_rx_queue routine.
Move REG_RX_CPU_IDX configuration out of the descriptor loop and rely on
the last queue head value updated in the descriptor loop.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260331-airoha-cpu-idx-out-off-loop-v1-1-75c66b428f50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Netfilter flowtable can theoretically try to offload flower rules as soon
as a net_device is registered while all the other ones are not
registered or initialized, triggering a possible NULL pointer dereferencing
of qdma pointer in airoha_ppe_set_cpu_port routine. Moreover, if
register_netdev() fails for a particular net_device, there is a small
race if Netfilter tries to offload flowtable rules before all the
net_devices are properly unregistered in airoha_probe() error patch,
triggering a NULL pointer dereferencing in airoha_ppe_set_cpu_port
routine. In order to avoid any possible race, delay offloading until
all net_devices are registered in the networking subsystem.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260329-airoha-regiser-race-fix-v2-1-f4ebb139277b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to properly cleanup hw rx QDMA queues and bring the device to
the initial state, reset rx DMA queue head/tail index. Moreover, reset
queued DMA descriptor fields.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Tested-by: Madhur Agrawal <Madhur.Agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260327-airoha_qdma_cleanup_rx_queue-fix-v1-1-369d6ab1511a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PPE cpu port configuration used for a specific GDM
device was set just running ndo_init() callback during the device
initialization. The selected PPE cpu port configuration depends on the QDMA
block assigned to the GDM port. The QDMA block is selected according to
the GDM port LAN/WAN configuration as specified in the commit
'8737d7194d6d ("net: airoha: select QDMA block according LAN/WAN
configuration"). However, the user selected PPE cpu port configuration can
be different with respect to the one hardcoded in the NPU firmware binary.
The hardcoded NPU PPE cpu port configuration is loaded initializing the PPE
engine running the NPU ops ppe_init() callback in airoha_ppe_offload_setup
routine (this is executed at runtime by the netfilter flowtable
infrastructure during flow offloading).
Reset the PPE cpu port configuration in airoha_ppe_hw_init routine in
order to apply the user requested setup according to the device DTS.
Please note this patch is fixing an issue not visible to the user (so we
do not need to backport it) since airoha_eth driver currently supports just
the internal phy available via the MT7530 DSA switch and there are no WAN
interfaces officially supported since PCS/external phy is not merged
mainline yet (it will be posted with following patches).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260317-airoha-fix-ppe-def-cpu-v1-1-338533d8e234@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch even GDM ports were assigned to QDMA0 while odd GDM
ports were using QDMA1, so, based on the DTS configuration, both QDMA0
and QDMA1 can theoretically receive traffic destinated to the host cpu
from LAN or WAN GDM ports.
Airoha folks reported the hw design assumes the LAN traffic destinated
to the host cpu is be forwarded to QDMA0 while traffic received on WAN
GDM port is managed by QDMA1. For this reason, select QDMA block according
to the GDM port LAN or WAN configuration:
- QDMA0 is used for GDM LAN devices
- QDMA1 is used for GDM WAN device
Assuming a device with three GDM ports, a typical configuration could be:
- MT7530 DSA switch -> GDM1 (eth0) -> QDMA0 (LAN traffic)
- External PHY -> GDM2 (eth1) -> QDMA1 (WAN traffic)
- External PHY -> GDM3 (eth2) -> QDMA0 (LAN traffic)
We can then bridge eth0 DSA port (lanX) with eth2 since they all tx/rx
LAN traffic.
Please note this patch introduces a change not visible to the user since
airoha_eth driver currently supports just the internal phy available via
the MT7530 DSA switch and there are no WAN interfaces officially supported
since PCS/external phy is not merged mainline yet (it will be posted with
following patches).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-qdma-lan-wan-mode-v2-1-7d577db6e40c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Do not run airoha_dev_stop routine explicitly in airoha_remove()
since ndo_stop() callback is already executed by unregister_netdev() in
__dev_close_many routine if necessary and, doing so, we will end up causing
an underflow in the qdma users atomic counters. Rely on networking subsystem
to stop the device removing the airoha_eth module.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260313-airoha-remove-ndo_stop-remove-net-v2-1-67542c3ceeca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change allows to set GDM forward port configuration to
FE_PSE_PORT_DROP stopping the network device. Hw design requires to stop
packet forwarding putting the interface down. Moreover, PPE firmware
requires to use PPE1 for GDM3 or GDM4.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-gdm-forward-ndo-open-stop-v1-1-7b7a20dd9ef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Flow control source port mapping for USB serdes needs to be configured
according to the GDM port nbq parameter. This is a preliminary patch
since nbq parameter is specific for the given port serdes and needs to
be read from the DTS (in the current codebase is assigned statically).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260306-airoha-fix-loopback-for-usb-serdes-v2-1-319de9c96826@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corrected the typo in the function name from
`airhoa_is_lan_gdm_port` to `airoha_is_lan_gdm_port`. This change ensures
consistency in the API naming convention.
Signed-off-by: Zhengping Zhang <aquapinn@qq.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/tencent_E4FD5D6BC0131E617D848896F5F9FCED6E0A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .get_link_ksettings to get the rate, duplex, and
auto-negotiation status.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260110170212.570793-1-olek2@wp.pl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since airoha_probe() is not executed under rtnl lock, there is small race
where a given device is configured by user-space while the remaining ones
are not completely loaded from the dts yet. This condition will allow a
hw device misconfiguration since there are some conditions (e.g. GDM2 check
in airoha_dev_init()) that require all device are properly loaded from the
device tree. Fix the issue moving net_devices registration at the end of
the airoha_probe routine.
Fixes: 9cd451d414 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251214-airoha-fix-dev-registration-v1-1-860e027ad4c6@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
EN7581 and AN7583 SoCs are capable of DMA mapping non-linear tx skbs on
non-consecutive DMA descriptors. This feature is useful when multiple
flows are queued on the same hw tx queue since it allows to fully utilize
the available tx DMA descriptors and to avoid the starvation of
high-priority flow we have in the current codebase due to head-of-line
blocking introduced by low-priority flows.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251106-airoha-tx-linked-list-v2-1-0706d4a322bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code has a copy and paste bug where it accidentally checks "if (err)"
instead of checking if "xsi_rsts" is NULL. Also, as a free bonus, I
changed the allocation from kzalloc() to kcalloc() which is a kernel
hardening measure to protect against integer overflows.
Fixes: 5863b4e065 ("net: airoha: Add airoha_eth_soc_data struct")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/aPtht6y5DRokn9zv@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch does not introduce any logical change, it just removes
duplicated code in airoha_regs.h.
Fix naming conventions in airoha_regs.h.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251022-airoha-regs-cosmetics-v2-1-e0425b3f2c2c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AN7583 chipset relies on different definitions for source-port
identifier used for hw offloading. In order to support hw offloading
in AN7583 controller, refactor src port configuration in
airhoha_set_gdm2_loopback routine and introduce get_src_port_id
callback.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-11-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Select the PPE default cpu port in airoha_dev_init routine.
This patch allows to distribute the load between the two available cpu
ports (FE_PSE_PORT_CDM1 and FE_PSE_PORT_CDM2) if the device is running a
single PPE module (e.g. 7583) selecting the cpu port based on the use
QDMA device. For multi-PPE device (e.g. 7581) assign FE_PSE_PORT_CDM1 to
PPE1 and FE_PSE_PORT_CDM2 to PPE2.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-10-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename airoha_ppe2_is_enabled() in airoha_ppe_is_enabled() and
generalize it in order to check if each PPE module is enabled.
Rely on airoha_ppe_is_enabled routine to properly initialize PPE for
AN7583 SoC since AN7583 does not support PPE2.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-5-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce airoha_eth_soc_data struct to contain differences between
various SoC. Move XSI reset names in airoha_eth_soc_data. This is a
preliminary patch to enable AN7583 ethernet controller support in
airoha-eth driver.
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251017-an7583-eth-support-v3-4-f28319666667@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the following stats to ethtool ethtool_eth_mac_stats stats:
- FramesTransmittedOK
- OctetsTransmittedOK
- FramesReceivedOK
- OctetsReceivedOK
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251013-airoha-ethtool-improvements-v1-1-fdd1c6fc9be1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Completion napi can free out-of-order tx descriptors if hw QoS is
enabled and packets with different priority are queued to same DMA ring.
Take into account possible out-of-order reports checking if the tx queue
is full using circular buffer head/tail pointer instead of the number of
queued packets.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251012-airoha-tx-busy-queue-v2-1-a600b08bab2d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add missing configuration for loopback mode in airhoha_set_gdm2_loopback
routine.
Fixes: 9cd451d414 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251008-airoha-loopback-mode-fix-v2-1-045694fe7f60@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export airoha_ppe_check_skb routine in ppe_dev ops. check_skb callback
will be used by the MT76 driver in order to offload the traffic received
by the wlan NIC and forwarded to the ethernet one.
Add rx_wlan parameter to airoha_ppe_check_skb routine signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-3-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce airoha_ppe_dev struct as container for PPE offload callbacks
consumed by the MT76 driver during flowtable offload for traffic
received by the wlan NIC and forwarded to the wired one.
Add airoha_ppe_setup_tc_block_cb routine to PPE offload ops for MT76
driver.
Rely on airoha_ppe_dev pointer in airoha_ppe_setup_tc_block_cb
signature.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250823-airoha-en7581-wlan-rx-offload-v3-2-f78600ec3ed8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If an error occurs after a successful airoha_hw_init() call,
airoha_ppe_deinit() needs to be called as already done in the remove
function.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the page_pool for airoha_eth driver is created with
PP_FLAG_DMA_SYNC_DEV flag, we do not need to sync_for_device each page
received from the pool since it is already done by the page_pool codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250625-airoha-sync-for-device-v1-1-923741deaabf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to not exceed the reserved memory size for hwfd buffers,
compute the number of hwfd buffers/descriptors according to the
reserved memory size and the size of each hwfd buffer (2KB).
Fixes: 3a1ce9e3d0 ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UPDMEM source-mac table is a key-value map used to store devices mac
addresses according to the port identifier. UPDMEM source mac table is
used during IPv6 traffic hw acceleration since PPE entries, for space
constraints, do not contain the full source mac address but just the
identifier in the UPDMEM source-mac table.
Configure UPDMEM source-mac table with device mac addresses and set
the source-mac ID field for PPE IPv6 entries in order to select the
proper device mac address as source mac for L3 IPv6 hw accelerated traffic.
Fixes: 00a7678310 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250602-airoha-flowtable-ipv6-fix-v2-1-3287f8b55214@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski