Highlights:
- acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support
- acpi: platform_profile: Add max-power profile option (power draw limited
by the cooling hardware, may exceed battery power
draw limit when on AC power)
- amd/hsmp: Allow >1 data-fabric per socket
- asus-armoury: Add WMI attributes driver to expose miscellaneous
WMI functions through fw_attributes (deprecates
the custom BIOS features interface through asus-wmi)
- asus-wmi: Use brightness_set_blocking() for kbd led
- ayaneo-ec: Add Ayaneo Embedded Controller driver
- fs/nls:
- Fix utf16 -> utf8 string conversion in output size restricted cases
- Improve error code consistency for utf8 -> utf32 conversions
- ideapad-laptop: Fast (Rapid Charge) charge type support
- intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
- intel/pmc:
- Arrow Lake telemetry GUID improvements
- Add support for Wildcat Lake PMC information
- intel_pmc_ipc: Fix ACPI buffer memleak
- intel/punit_ipc: Fix memory corruption
- intel/vsec: Wildcat Lake PMT telemetry support
- lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power
- lg-laptop: Add support for the HDAP opregion field
- serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
- thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard
backlight)
- uniwill: Add Uniwill laptop driver
- wmi: Move under drivers/platform/wmi as non-x86 WMI support is around
the corner and other WMI features will require adding more C
files as well
- tools/power/x86/intel-speed-select: v1.24
- Check feature status to check if the feature enablement was successful
- Reset SST-TF bucket structure to display valid bucket info
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Add fan control support
- Add support for PHN16-72
- Enable fan control for PH16-72 and PT14-51
- Fix setting of fan behavior
acpi:
- platform_profile - Add max-power profile option
Add Uniwill laptop driver:
- Add Uniwill laptop driver
alienware-wmi-wmax:
- Simplify FW profile to pprof matching
amd: hfi:
- Remove redundant assignment to .owner
- Remove unused cpumask from cpuinfo struct
amd/hsmp:
- Replace amd_num_nodes() with topology_max_packages()
amd/pmf:
- Add BIOS_INPUTS_MAX macro to replace hardcoded array size
- Refactor repetitive BIOS output handling
- Rename IPU metrics fields to NPU for consistency
- Replace magic table id with METRICS_TABLE_ID
- Use devm_mutex_init() for mutex initialization
- Use explicit SET_CMD/GET_CMD flags in amd_pmf_send_cmd()
arm64: thinkpad-t14s-ec:
- add suspend handler for keyboard backlight
- add system PM hooks
asus-armoury:
- add apu-mem control support
- add panel_hd_mode attribute
- add ppt_* and nv_* tuning knobs
- add screen auto-brightness toggle
- add support for FA507UV
- add support for GA503QR
- Fix error code in mini_led_mode_current_value_store()
- fix mini-led mode show
- fix only DC tunables being available
- move existing tunings to asus-armoury module
asus-wmi:
- deprecate bios features
- export symbols used for read/write WMI
- rename ASUS_WMI_DEVID_PPT_FPPT
- use brightness_set_blocking() for kbd led
ayaneo-ec:
- Add Ayaneo Embedded Controller platform driver
- Add charge control support
- Add controller power and modules attributes
- Add hwmon support
- Add suspend hook
- Move Ayaneo devices from oxpec to ayaneo-ec
Documentation: laptops:
- Add documentation for uniwill laptops
fs/nls:
- Fix inconsistency between utf8_to_utf32() and utf32_to_utf8()
- Fix utf16 to utf8 conversion
hp-wmi:
- Order DMI board name arrays
ideapad-laptop: Add charge_types:
- Fast (Rapid Charge)
ideapad-laptop:
- Protect GBMD/SBMC calls with mutex
- Support multiple power_supply_ext definitions
- Use str_on_off() helper
intel/hid:
- Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
intel/pmc:
- Add DMU GUID to Arrow Lake U/H
- Add support for multiple DMU GUIDs
- Enable SSRAM support for Wildcat Lake
intel_pmc_ipc:
- fix ACPI buffer memory leak
intel/pmc:
- Relocate lpm_req_guid to pmc_reg_map
- Remove redundant has_die_c6 variable
- Rename PMC index variable to pmc_idx
- Update Arrow Lake telemetry GUID
intel/vsec:
- Add support for Wildcat Lake
lenovo-wmi-gamezone Use max-power rather than balanced-performance:
- lenovo-wmi-gamezone Use max-power rather than balanced-performance
lg-laptop:
- Add support for the HDAP opregion field
serial-multi-instantiate:
- Add IRQ_RESOURCE_OPT for IRQ missing projects
surface: acpi-notify:
- add WQ_PERCPU to alloc_workqueue users
surface: aggregator:
- Omit a variable reassignment in ssam_serial_hub_probe()
surface:
- replace use of system_wq with system_percpu_wq
tools/power/x86/intel-speed-select:
- Check feature status
- Reset isst_turbo_freq_info for invalid buckets
- v1.24 release
uniwill:
- Add TUXEDO devices
- Handle more WMI events required for TUXEDO devices
wmi-gamezone:
- Add Legion Go 2 Quirks
wmi:
- Move WMI core code into a separate directory
- Remove extern keyword from prototypes
- Use correct type when populating ACPI objects
x86-android-tablets:
- Omit a variable reassignment in lenovo_yoga_tab2_830_1050_init_codec()
x86:
- replace use of system_wq with system_percpu_wq
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaTgl5wAKCRBZrE9hU+XO
McWDAP4nmj5+EeHsg3Kl0kQ1lqF9llWI4EM2NeRd6MwrV5klxgD9FLW6djGkmP2j
RjtZ4CULbtQ3QMl7kmXhfAjRwJfiSgk=
=yFvQ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support
- acpi: platform_profile: Add max-power profile option (power draw
limited by the cooling hardware, may exceed battery power draw limit
when on AC power)
- amd/hsmp: Allow more than one data-fabric per socket
- asus-armoury: Add WMI attributes driver to expose miscellaneous WMI
functions through fw_attributes (deprecates the custom BIOS features
interface through asus-wmi)
- asus-wmi: Use brightness_set_blocking() for kbd led
- ayaneo-ec: Add Ayaneo Embedded Controller driver
- fs/nls:
- Fix utf16 to utf8 string conversion when output size restricted
- Improve error code consistency for utf8 to utf32 conversions
- ideapad-laptop: Fast (Rapid Charge) charge type support
- intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
- intel/pmc:
- Arrow Lake telemetry GUID improvements
- Add support for Wildcat Lake PMC information
- intel_pmc_ipc: Fix ACPI buffer memleak
- intel/punit_ipc: Fix memory corruption
- intel/vsec: Wildcat Lake PMT telemetry support
- lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power
- lg-laptop: Add support for the HDAP opregion field
- serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing
projects
- thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard
backlight)
- uniwill: Add Uniwill laptop driver
- wmi: Move under drivers/platform/wmi as non-x86 WMI support is around
the corner and other WMI features will require adding more C files as
well
- tools/power/x86/intel-speed-select: v1.24
- Check feature status to check if the feature enablement was
successful
- Reset SST-TF bucket structure to display valid bucket info
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits)
tools/power/x86/intel-speed-select: v1.24 release
tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets
tools/power/x86/intel-speed-select: Check feature status
platform/x86: asus-wmi: use brightness_set_blocking() for kbd led
fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8()
platform/x86: asus-armoury: add support for GA503QR
platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak
platform/x86: hp-wmi: Order DMI board name arrays
platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
platform: surface: replace use of system_wq with system_percpu_wq
platform: x86: replace use of system_wq with system_percpu_wq
platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users
platform/x86: wmi-gamezone: Add Legion Go 2 Quirks
platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance
acpi: platform_profile - Add max-power profile option
platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization
platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size
platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
platform/x86/amd/pmf: Refactor repetitive BIOS output handling
platform/x86/uniwill: Add TUXEDO devices
...
Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1.
Nothing major here, just lots of tiny updates for most of the common USB
drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTLNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn29wCcD23xCSWuRIKHfSWlefCwptHKT0AAoM0NJdeO
C4/4pui5ifTu1g5Vud1r
=Sm/3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
* Add support for Awinic AW99706 backlight driver.
* Add GPIOLIB dependency to backlight ktd2801 driver.
* Add devlink to LED Backlight's supplier LEDs to enforce correct removal
order and prevent NULL pointer dereferences.
* Fix kernel-doc warnings in lp855x.h
* Do not include <linux/fb.h> in backlight.h.
* Fix unused function warnings from suspend/resume ops in aw99706.c by
switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr().
* Add Awinic AW99706 backlight binding to MAINTAINERS.
* Add Awinic AW99706 backlight binding documentation.
-----BEGIN PGP SIGNATURE-----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=n4gn
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Additions:
- Add support for Awinic AW99706 backlight driver
Fixes:
- Add GPIOLIB dependency to backlight ktd2801 driver
- Add devlink to LED Backlight's supplier LEDs to enforce correct
removal order and prevent NULL pointer dereferences
- Fix kernel-doc warnings in lp855x.h
Removals:
- Do not include <linux/fb.h> in backlight.h
- Fix unused function warnings from suspend/resume ops in aw99706.c
by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr()
Bindings:
- Add Awinic AW99706 backlight binding to MAINTAINERS
- Add Awinic AW99706 backlight binding documentation"
* tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: aw99706: Fix unused function warnings from suspend/resume ops
backlight: lp855x: Fix lp855x.h kernel-doc warnings
dt-bindings: leds: backlight: Add Awinic AW99706 backlight
backlight: aw99706: Add support for Awinic AW99706 backlight
backlight: led-bl: Add devlink to supplier LEDs
backlight: ktd2801: Depend on GPIOLIB
backlight: Do not include <linux/fb.h> in header file
This release is almost entirely new drivers, with a couple of small
changes in generic code. The biggest individual update is a rename of
the existing Microchip driver and the addition of a new driver for the
silicon SPI controller in their PolarFire SoCs. The overlap between the
soft IP supported by the current driver and this new one is regrettably
all in the IP and not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be defined
in relation to each other. This is useful for IIO type applcations
where you trigger an operation then read the result after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support more
in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT K1
QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought to
my attention, sorry about that.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt8qUACgkQJNaLcl1U
h9COSAf/buDi3hXYykhEbSlwl839u1XhCU9d8eJF8GhlWR87JeJCb8ou7RdMOQhE
HFehdoD2d5EcPc169cDp2uis8LovGZIPWuzh3D83eZpOOQTLMaQYBrDVNquBoKOR
WVFPPy9X/kb/IR63vM0b5Xv9K6l3ud4yauIsa0ingl9pZi5m2fB3ZEOx9siYYwAn
4fxv43jESbwdTfx33Yc4CkzctZEKuqI2JgLNe/mJZQsdYhS/nLvmDwiZ69k6b4ac
QSHQkP6i+fQzogcbip2z8dA3IUEhDjNQdBbtzmIot8Qbg7zXJkXpAlx2Wstw7Lt8
vLTUY/EHqKh39zok5GECq6E2R6W41w==
=Uw2/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
Add a missing struct short description and a missing leading " *" to
lp855x.h to avoid kernel-doc warnings:
Warning: include/linux/platform_data/lp855x.h:126 missing initial short
description on line:
* struct lp855x_platform_data
Warning: include/linux/platform_data/lp855x.h:131 bad line:
Only valid when mode is PWM_BASED.
Fixes: 7be865ab86 ("backlight: new backlight driver for LP855x devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
We no longer support any board files for DaVinci in mainline and so
struct da8xx_ohci_root_hub is no longer used. Remove it together with
all the code it's used for.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251114-davinci-usb-v1-1-737380353a74@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Schyboll <dragonn@op.pl>
Tested-by: Porfet Lillian <porfet828@gmail.com>
Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add screen_auto_brightness toggle supported on some laptops.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-7-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement the APU memory size control under the asus-armoury module using
the fw_attributes class.
This allows the APU allocated memory size to be adjusted depending on
the users priority. A reboot is required after change.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are no longer any board files including the DaVinci SPI platform
data header. Let's move the bits and pieces that are used in the driver
into the driver .c file itself and remove the header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251117-davinci-spi-v2-1-cd799d17f04a@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add panel_hd_mode to toggle the panel mode between single and high
definition modes.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20251102215319.3126879-4-denis.benato@linux.dev
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The fw_attributes_class provides a much cleaner interface to all of the
attributes introduced to asus-wmi. This patch moves all of these extra
attributes over to fw_attributes_class, and shifts the bulk of these
definitions to a new kernel module to reduce the clutter of asus-wmi
with the intention of deprecating the asus-wmi attributes in future.
The work applies only to WMI methods which don't have a clearly defined
place within the sysfs and as a result ended up lumped together in
/sys/devices/platform/asus-nb-wmi/ with no standard API.
Where possible the fw attrs now implement defaults, min, max, scalar,
choices, etc. As en example dgpu_disable becomes:
/sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
├── current_value
├── display_name
├── possible_values
└── type
as do other attributes.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Export symbols for reading/writing WMI symbols using a namespace.
Existing functions:
- asus_wmi_evaluate_method
- asus_wmi_set_devstate
New function:
- asus_wmi_get_devstate_dsts
The new function is intended for use with DSTS WMI method only and
avoids requiring the asus_wmi driver data to select the WMI method.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251102215319.3126879-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This effectively reverts b0ba512e25 ("net: bcmgenet: enable driver to
work without a device tree"). There has never been an in-tree user of
struct bcmgenet_platform_data, all devices use OF or ACPI.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/108b4e64-55d4-4b4e-9a11-3c810c319d66@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
Here is the big set of char/misc/iio and other driver subsystem changes
for 6.18-rc1. Loads of different stuff in here, it was a busy
development cycle in lots of different subsystems, with over 27k new
lines added to the tree. Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor
updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust. This is the big one, and
was driving a huge majority of the rust binding work over the past
years. Right now there are 2 binder drivers in the kernel, selected
only at build time as to which one to use as binder wants to be
included in the system at boot time. The binder C maintainers all
agreed on this, as eventually, they want the C code to be removed from
the tree, but it will take a few releases to get there while both
are maintained to ensure that the rust implementation is fully
stable and compliant with the existing userspace apis.
All of these have been in linux-next for a while, with only minor merge
issues showing up (you will hit them as well.) Just accept both sides
of the merge, it's just some header and include file lines, nothing
major.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
macHNv5/SjpAh7H5ssBU
=cjWS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
- Bad blocks increment is skipped if the block is already known
bad (improves user statistics relevance).
- Expose the OOB layout via debugfs.
* Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers,
including extra features, such as chip select and 6-byte NAND ID
reading support.
- Drop the s3c2410 driver.
* SPI NAND:
- Important SPI NAND continuous read improvements and fixes.
- Add support for FudanMicro FM25S01A.
- Add support for continuous reads in Gigadevice vendor driver.
* ECC:
- Add support for the Realtek ECC engine.
* SPI NOR:
- Some flashes can't perform reads or writes with start or end being an
odd number in Octal DTR mode. File systems like UBIFS can request such
reads or writes, causing the transaction to error out. Pad the read or
write transactions with extra bytes to avoid this problem.
This PR comes with the usual amount of various miscellaneous fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmjf6ywACgkQJWrqGEe9
VoTsjgf/ZJDpcteO8hk+YUZfVycEKCDB0QjEFfX3gP3ABjvBJ1jwliDselpYPxfI
La2BIw0X0oljfpY69a2KV440NXSW+hcWBUOw9IyhlaLA3tz8vFZbDnybPYAYQyq4
Chvj0F18kwvxv9DZrp9rYLfnXcqzVaKr/g3/q8OwfoYzhmnKecRKStbRk+NQ94zp
hL32a5bi2rgAuJl1raNTL2pHyYaYvo46rDDDApSipKt58GdYG1CA6eSrMLdWwgbL
k9cJ+WQsXF+rfyfqDLZziXMjWixtNBkxOhewnZOWG21wdEPXdTVzaXF/a67fUhxO
V0Erqomnx4dwi880Uv/4KGui0Rfgtg==
=D6Lb
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm: Add support for tuning for SDR50 mode for SD cards
- sdhci-msm: Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmjafZQXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmSng//QMGmS6uWiPeVG237VwtZ0qir
XB7N4H0ig0wa/Qxqc9soXrBDmlKKVFaf/VvZOsqKHy3QjDGV+i6a2WVj+rao4vzi
/M3jmJK+vKGjNah/jbZEu7hUMY22buiPiRbUUv3UUmpBTxqXdsyTX+hmHJdiRQ7B
jC5GGPMbv1wMUj3ivkuwwlabRYFMy1QwFfDZxQzhEI4Codfs1P0nr2PFvCJ/r8nq
TsPYkDWevxItnyxSkaDK7bK4yGFOKnnhf7aj1d4NMS6AX2FH3QPDP09rmdHwrdZb
prgbccQusxoK2zJFwOqoTucYeNmhXgyAvuoj9kGtBkzbyTjorh2fdXwzGAnAkYqZ
ygoIvq/lPQj6ppXd5BTfldAt69/Yyj6tyWuVMJ2EdoL0yfO2xPv0lnUdrN73ATZB
jaRJdvF9EiGSfG2DzzK0W1CTpKvHg4pRA6InGgok1xIVM68iOwQcBDcU9D3tDkZo
4HpuEGVJnso0q9xh0dO36HmryKsQge5jfq3mTe3Y+kHTteWYMh7VO4FhZL+AV2fp
LDL1aLn21Q71TH+aqYA6DVn3wrXWkhg9U2Uz//SU4lv18o3Fc47GJBtbvb0nEqXX
1BUJ5QcAeNMHo2Xm7yc5YwBpghCTCZDJOogzyXaQW0nbMvn+11X4gCREYgNBP7cv
mrygbFCHLJDKscE0ZkY=
=D2yD
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
* New drivers
- Driver for Kontron SMARC-sAM67
- Driver for GPD device sensors
- Driver for MP29502
- Driver for MP2869, MP29608, MP29612 and MP29816 series
* Added chip support to existing drivers
- asus-ec-sensors:
Add B650E-I
Add PRIME Z270-A
Add Pro WS WRX90E-SAGE SE
Add ROG STRIX X670E-E GAMING WIFI
Add ROG STRIX X870-I GAMING WIFI
Add ROG STRIX X870E-E GAMING WIFI
Add ROG STRIX Z690-E GAMING WIFI
Add ROG STRIX Z790E GAMING WIFI II
Add STRIX B850-I GAMING WIFI
Add TUF GAMING X670E PLUS WIFI
Add X670E-I GAMING WIFI
Add Z790-I GAMING WIFI
- dell-smm: Add support for Dell OptiPlex 7040
- ina238: Major cleanup, and
Add support for INA700
Add support for INA780
- k10temp:
Add device ID for Strix Halo
Add support for AMD Family 1Ah-based models
- lenovo-ec-sensors: Update P8 supprt
- lm75: Add NXP P3T1750 support
- pmbus/adm1275: Add sq24905c support
- pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246
- pmbus/mp5990: Add support for MP5998
- sht21: Add support for SHT20, SHT25
- sl28cpld: Add sa67mcu compatible
* Other notable changes
- core:
Handle locking internally
Introduce 64-bit energy attribute support
- cros_ec: Register into thermal framework, improve PWM control
- lm75: allow interrupt for ti,tmp75
- mlxreg-fan: Add support for new flavour of capability register
- sbtsi_temp: AMD CPU extended temperature range support
- sht21: Add devicetree support
* Various other minor improvements and fixes
-----BEGIN PGP SIGNATURE-----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=jb6g
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kontron SMARC-sAM67
- GPD device sensors
- MP29502
- MP2869, MP29608, MP29612 and MP29816 series
Added chip support to existing drivers:
- asus-ec-sensors:
Add B650E-I
Add PRIME Z270-A
Add Pro WS WRX90E-SAGE SE
Add ROG STRIX X670E-E GAMING WIFI
Add ROG STRIX X870-I GAMING WIFI
Add ROG STRIX X870E-E GAMING WIFI
Add ROG STRIX Z690-E GAMING WIFI
Add ROG STRIX Z790E GAMING WIFI II
Add STRIX B850-I GAMING WIFI
Add TUF GAMING X670E PLUS WIFI
Add X670E-I GAMING WIFI
Add Z790-I GAMING WIFI
- dell-smm: Add support for Dell OptiPlex 7040
- ina238: Major cleanup, and
Add support for INA700
Add support for INA780
- k10temp:
Add device ID for Strix Halo
Add support for AMD Family 1Ah-based models
- lenovo-ec-sensors: Update P8 supprt
- lm75: Add NXP P3T1750 support
- pmbus/adm1275: Add sq24905c support
- pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246
- pmbus/mp5990: Add support for MP5998
- sht21: Add support for SHT20, SHT25
- sl28cpld: Add sa67mcu compatible
Other notable changes:
- core:
Handle locking internally
Introduce 64-bit energy attribute support
- cros_ec: Register into thermal framework, improve PWM control
- lm75: allow interrupt for ti,tmp75
- mlxreg-fan: Add support for new flavour of capability register
- sbtsi_temp: AMD CPU extended temperature range support
- sht21: Add devicetree support
Various other minor improvements and fixes"
* tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75
hwmon: (mlxreg-fan) Add support for new flavour of capability register
hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems
hwmon: (cros_ec) register fans into thermal framework cooling devices
hwmon: (cros_ec) add PWM control over fans
platform/chrome: update pwm fan control host commands
hwmon: add SMARC-sAM67 support
dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI
hwmon: (dell-smm) Add support for Dell OptiPlex 7040
hwmon: (dell-smm) Add support for automatic fan mode
hwmon: (gpd-fan) complete Kconfig dependencies
hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex
hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI
hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan()
hwmon: (dell-smm) Remove Dell Precision 490 custom config data
hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI
hwmon: (gpd-fan) Fix range check for pwm input
hwmon: (pmbus/mp5990) add support for MP5998
dt-bindings: trivial-devices: add mps,mp5998
...
* New
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready.
* Improvements
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning.
- Defer probe until parent EC device is ready in cros_ec_keyb.
* Cleanups
- Remove redundant and simplify code in cros_ec_chardev.
- Centralize cros_ec_device allocation and initialization to remove
duplicate code.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaNku+BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0DFkA/0+FF785x38lKTlAnJMSlNcABwYzsi9Z
b70Yc2ytNzp8AP9x5gk68EdwkLF97Mu08JvL8ZUPL6z5jQ3PPd96QDcrCg==
=zRIv
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=LZUc
-----END PGP SIGNATURE-----
Merge tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
Update cros_ec_commands.h to include definitions for getting PWM fan
duty, getting and setting the fan control mode.
Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250911-cros_ec_fan-v6-1-a1446cc098af@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add PWM capture function in DM timer driver.
OMAP DM timer hardware supports capture feature.It can be used to
timestamp events (falling/rising edges) detected on input signal.
Signed-off-by: Gokul Praveen <g-praveen@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250812105346.203541-1-g-praveen@ti.com
Introduce a `registered` flag to the `struct cros_ec_device` to allow
callers to determine if the device has been fully registered and is
ready for use.
This is a preparatory step to prevent race conditions where other drivers
might try to access the device before it is fully registered or after
it has been unregistered.
Link: https://lore.kernel.org/r/20250828083601.856083-5-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Move the common initialization from protocol device drivers into central
cros_ec_device_alloc().
This removes duplicated code from each driver's probe function.
The buffer sizes are now calculated once, using the maximum possible
overhead required by any of the transport protocols, ensuring the
allocated buffers are sufficient for all cases.
Link: https://lore.kernel.org/r/20250828083601.856083-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
There are no Samsung Exynos SoC ADC driver users which bind via platform
ID, thus platform data is never set and can be dropped.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250830-s3c-cleanup-adc-v2-3-4f8299343d32@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are no in-kernel users of spear kbd_platform_data in the kernel,
and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/vppjxui76im26uamznx7evm5lmbe3d6v3oxsa7mqyytykh4zm6@nhlf33v3hp6g
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no in-kernel users of pxa27x_keypad_platform_data in the
kernel, and the driver supports configuration via device tree, so drop
support of static platform data and move properties parsing from
OF-specific methods to generic ones.
Link: https://lore.kernel.org/r/20250817215316.1872689-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The s3c2410 NAND driver still supports S3C64xx platform, which in
general is supported in the kernel. There are however no references of
"s3c6400-nand" platform device ID or "s3c24xx-nand" driver, thus this
driver cannot be instantiated for S3C64xx platform and is basically
unused.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
As per the RZ/{G2L,G3E} HW manual SD_BUF0 can be accessed by 16/32/64
bits. Most of the data transfer in SD/SDIO/eMMC mode is more than 8 bytes.
During testing it is found that, if the DMA buffer is not aligned to 128
bit it fallback to PIO mode. In such cases, 64-bit access is much more
efficient than the current 16-bit.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250730164618.233117-2-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Typically HDMI to MIPI CSI-2 bridges have a pin to signal image data is
being received. On the host side this is wired to a GPIO for polling or
interrupts. This includes the Lontium HDMI to MIPI CSI-2 bridges
lt6911uxe and lt6911uxc.
The GPIO "hpd" is used already by other HDMI to CSI-2 bridges, use it
here as well.
Signed-off-by: Dongcheng Yan <dongcheng.yan@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 20244cbafb ("media: i2c: change lt6911uxe irq_gpio name to "hpd"")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
* Updated chip support in existing drivers
- ina238: Support for INA228
- pmbus/tps53679: Support for TPS53685
- pmbus/adp1050: Support for adp1051, adp1055 and ltp8800
- corsair-psu: Support for HX1200i Series 2025
- pmbus/isl68137: Support for RAA229621
- asus-ec-sensors: Support for ProArt X870E-CREATOR WIFI and
* Other notable changes
- adt7475: Support for #pwm-cells = <3>
- amc6821: Cooling device support
- emc2305: Support for PWM frequency, polarity and output
- Add missing compatible entries to various devicetree bindings
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=6w+m
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Updated chip support in existing drivers:
- ina238: Support for INA228
- pmbus/tps53679: Support for TPS53685
- pmbus/adp1050: Support for adp1051, adp1055 and ltp8800
- corsair-psu: Support for HX1200i Series 2025
- pmbus/isl68137: Support for RAA229621
- asus-ec-sensors: Support for ProArt X870E-CREATOR WIFI and
Other notable changes:
- adt7475: Support for #pwm-cells = <3>
- amc6821: Cooling device support
- emc2305: Support for PWM frequency, polarity and output
- Add missing compatible entries to various devicetree bindings
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (34 commits)
dt-bindings: hwmon: Replace bouncing Alexandru Tachici emails
hwmon: (ina238) Add support for INA228
dt-bindings: Add INA228 to ina2xx devicetree bindings
hwmon: (ina238) Fix inconsistent whitespace
dt-bindings: hwmon: adt7475: Allow and recommend #pwm-cells = <3>
hwmon: (adt7475) Implement support for #pwm-cells = <3>
hwmon: (pmbus/tps53679) Add support for TPS53685
dt-bindings: trivial: Add tps53685 support
hwmon: (pmbus/adp1050) Add regulator support for ltp8800
hwmon: (pmbus/adp1050) Add support for adp1051, adp1055 and ltp8800
dt-bindings: hwmon: pmbus/adp1050: Add adp1051, adp1055 and ltp8800
hwmon: (max31827) use sysfs_emit() in temp1_resolution_show()
hwmon: (ltc4282) convert from round_rate() to determine_rate()
hwmon: (corsair-psu) add support for HX1200i Series 2025
dt-bindings: hwmon: pmbus: ti,ucd90320: Add missing compatibles
dt-bindings: hwmon: maxim,max20730: Add maxim,max20710 compatible
dt-bindings: hwmon: lltc,ltc2978: Add lltc,ltc713 compatible
dt-bindings: hwmon: ti,lm87: Add adi,adm1024 compatible
dt-bindings: hwmon: national,lm90: Add missing Dallas max6654 and onsemi nct72, nct214, and nct218
hwmon: (w83627ehf) make the read-only arrays 'bit' static const
...
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
KSZ8463 switch is a 3-port switch based from KSZ8863. Its major
difference from other KSZ SPI switches is its register access is not a
simple continual 8-bit transfer with automatic address increase but uses
a byte-enable mechanism specifying 8-bit, 16-bit, or 32-bit access. Its
registers are also defined in 16-bit format because it shares a design
with a MAC controller using 16-bit access. As a result some common
register accesses need to be re-arranged.
This patch adds the basic structure for using KSZ8463. It cannot use the
same regmap table for other KSZ switches as it interprets the 16-bit
value as little-endian and its SPI commands are different.
KSZ8463 uses a byte-enable mechanism to specify 8-bit, 16-bit, and 32-bit
access. The register is first shifted right by 2 then left by 4. Extra
4 bits are added. If the access is 8-bit one of the 4 bits is set. If
the access is 16-bit two of the 4 bits are set. If the access is 32-bit
all 4 bits are set. The SPI command for read or write is then added.
Because of this register transformation separate SPI read and write
functions are provided for KSZ8463.
KSZ8463's internal PHYs use standard PHY register definitions so there is
no need to remap things. However, the hardware has a bug that the high
word and low word of the PHY id are swapped. In addition the port
registers are arranged differently so KSZ8463 has its own mapping for
port registers and PHY registers. Therefore the PORT_CTRL_ADDR macro is
replaced with the get_port_addr helper function.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250725001753.6330-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add three new attributes to the driver data structures to support
configuration of PWM frequency, PWM polarity and PWM output config.
Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20250603113125.3175103-2-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82a
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ChromeOS EC can report activity information derived from the
accelerometer:
- Reports on-body/off-body as a proximity event.
- Reports significant motion as an activity event.
This new sensor is a virtual sensor, included only when the EC firmware
is compiled with the appropriate module.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20250604053903.1376465-1-gwendal@google.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the compile-time warning
drivers/video/fbdev/pxafb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbol is not used anywhere, so remove the function
entirely.
v2:
- remove unused functions (Helge)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612081738.197826-12-tzimmermann@suse.de
sensor_config is not used anywhere and its struct int3472_sensor_config
type also is not declared anywhere, drop it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-5-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
At the moment the atomisp has duplicate code for parsing Intel camera
sensor GPIOS and calling the special 79234640-9e10-4fea-a5c1-b5aa8b19756f
_DSM to get the GPIO type and map it to the sensor.
Export int3472_discrete_parse_crs() so that the atomisp driver can reuse
the INT3472 code for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The intent is to re-use the INT3472 code for parsing Intel camera sensor
GPIOs and mapping them to the sensor for the atomisp driver, which
currently has duplicate code.
On atomisp devices there is no special INT3472 ACPI device, instead
the Intel _DSM to get the GPIO type is part of the ACPI device for
the sensor itself.
To deal with this the mapping is done from ipu_bridge_init() instead of
from a platform-device probe() function, there is no device to tie
the lifetime of the gpiod_get() calls done by the INT3472 code to.
Switch from devm_gpiod_get() to plain gpiod_get() + explicit gpiod_put()
calls, to prepare for the code being re-used in the atomisp driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-3-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the common.h header file to include/linux/platform_data/x86/int3472.h
and add a "INTEL_INT3472" kernel-symbol-namespace to the exported symbols.
This is a preparation patch for exporting some more symbols for re-use in
the atomisp driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Linus Torvalds