CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms
after the driver was split into multiple files.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
These modules are needed to configure bridges in Linux, to take full
advantage of the KSZ switch capabilities.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
Enable DSA and KSZ9477 support as modules. Ethernet switches are used by
the SAMA5D2-ICP board.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VWPcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM77HQgAshj+pVP6bsje1ToHm1qdeYTiNYEw
rvmEZ+5+S6Qmj8wj7z0pSwAGsUe7ZqkfcOJqRUBOHQHxNKSpTvccg75QX3SQBFPE
1vojpN+XP2cDRyWFe4cbNjoAJV9hudix+AZAJNbhth92Z7YEz/KHu2oIuni6Xqqn
V+qFqqsuTCRUp+4C1rJphGaCnS5ux4E1gDz3Ae1e6LKprk4sPtpo4ViuNLRZDigK
O1RSiQJYcNTWEKdmrKQiMLPcO4elHnsf+kvi5hHXRc3a5h44yQ3qdMmysw/X6n/9
ElbmI9PCeKOaLqmkzsQYBl2M6v24KXjijmjQgA+tf2kZJB+zlSR8RwkqeQ==
=J5lQ
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.9:
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
* tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Support i.MX8MM
arm64: defconfig: enable RTC and audio support on Kontron sl28 boards
arm64: defconfig: add pca9450 pmic driver
Link: https://lore.kernel.org/r/20200720085536.24138-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
add all the new drivers merged recently.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlogAKCRDj7w1vZxhR
xZRpAP9zz41nKML2Dtb08tYExiCpYTPpKxZLditIVb++2m+MmAEAzC4DAKZ+8TeR
q64W64aLxbulbLsWw24pPRyMUKPZswM=
=JhPS
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
A bunch of patches to generally make sunxi_defconfig more helpful and
add all the new drivers merged recently.
* tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable crypto related options
ARM: sunxi: configs: Enable the Mailbox driver
ARM: configs: sunxi: Enable the PS/2 controller
ARM: configs: sunxi: Enable Lima
ARM: configs: sunxi: Add DRM output-related options
ARM: configs: sunxi: Enable ASoC options
ARM: configs: sunxi: Enable Cedrus
ARM: configs: sunxi: Enable the deinterlace and rotation engines
ARM: configs: sunxi: Enable the CSI drivers
ARM: configs: sunxi: Run savedefconfig
Link: https://lore.kernel.org/r/c74e64c9-f1f2-40ee-b4cd-c1430d32cf8d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl8RzOsTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoZz+EACSWbN0LCgn5qhF3nlG0VmLjhnpKQse
78UQnXZj+ekw5L+WJBObGAp/1Tn/MYWtknoA6abXUkFlinIkFvOasnc7hVMdHEBP
p4+UQxy73pHHcz4FmERiAD0KFasqriclHvABB5+hUjz6Qid6/ZsjAMz1S2LxZZqC
4eNTRBgVf1/eA5R9GLIXceszvsofGOKt0ApZNB2R7kNA3r3ww4PXzEinaTlfqajI
qYWUQCC4WMdtKS0lhND/Z7eqpk9uCGJVxn8d2Tv0BaHDAq+zc+AO9ovoVPwgJ/Pp
/SXwvtBsNz/XM+Klyj3WEH0sUDBc5OR5uu7hg+4YMZImyA3NpiNJHSI7yHNOBRR9
oiMfVYRW94BPOlgVjQ8K/QXEGTctkCTSOyRNmrK56ou4dKmvM9k5HWNsQzmN6Hly
DYVWeHsEKURFRAR/VIAxpFQIlSJcZe0kl8TSgcG8Lv6sqRiY6/hMFcT5jVXL72QL
KiMXGEKk0Kc3s6JxTJgf//V/rZ/0GIN1y4aeBWBzNIgvNE9TloVhvGwi2tLZ74Nb
fmeNbbwDVjVxf7NfhKzZJEAUSFU8/giD3F4dfgFPHQafuQajhTddN0pmJ8Qn01XB
ZJ/fcLGlf+4YJsNhxvb7ZqxM3LzsbaRwWpfEytVd5vVNh8AZnLM0yxfLZt1V62ry
OL0p8ork6MAn0g==
=x+zU
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.9-rc1
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
* tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500
ARM: tegra: Enable CPUFREQ userspace governor
Link: https://lore.kernel.org/r/20200717161300.1661002-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_SDHCI_AM654 to Support AM65x sdhci controller.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Select TI chip id driver for TI's SoCs based on K3 architecture to provide
this information to user space and Kernel as it is required by other
drivers to determine SoC revision to function properly.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
We refactored the CrOS EC drivers moving part of the code from the MFD
subsystem to the platform chrome subsystem. During this change we needed
to rename some config options, so, update the defconfigs accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable several very useful options and drivers for hardware that is found
on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may
require firmware files extracted from original Android image.
Link: https://github.com/grate-driver/linux-firmware
Link: https://github.com/grate-driver/alsa-ucm-conf
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CPUFREQ userspace governor in the tegra_defconfig so that
we can test CPUFREQ with the userspace governor with this configuration
on 32-bit Tegra devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Now that we have the needed network scheduler, we can enable the ENETC
hardware support.
$ scripts/bloat-o-meter old-vmlinux vmlinux
add/remove: 19/2 grow/shrink: 12/0 up/down: 12852/-16 (12836)
[..]
Total: Before=20428273, After=20441109, chg +0.06%
Link: https://lore.kernel.org/r/20200707223114.16355-2-michael@walle.cc
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Newer network cards and switches support offloading of certain packet
scheduling, classifying and actions onto the hardware itself. For
example, time-aware and credit based schedulers. To use this feature we
have to enable the corresponding modules. Please note, that this will
also enable NET_SCHED and NET_CLS_ACT as builtin because there is no
module option. The enabled modules should get us a good foundation.
$ scripts/bloat-o-meter old-vmlinux vmlinux
add/remove: 446/215 grow/shrink: 48/31 up/down: 78445/-11519 (66926)
[..]
Total: Before=20452567, After=20519493, chg +0.33%
Link: https://lore.kernel.org/r/20200707223114.16355-1-michael@walle.cc
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX8MM is built with AArch64 hardware, this is to support
it could run in Aarch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although the Kontron SMARC-sAL28 board is now supported, there is still
missing driver support for the hardware clock, audio interface and audio
codec. Let's enable them as modules (where possible).
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mailbox found on the A31 and later SoCs have recently gained some
support in Linux. Since it's going to be useful for crust, let's enable it
in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200706132323.147562-2-maxime@cerno.tech
- Refresh shmobile_defconfig for v5.8-rc1
- Enable additional support for Renesas platforms to
shmobile_defconfig, multi_v7_defconfig, and the arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXv8YvAAKCRCKwlD9ZEnx
cJXnAQDNsLH6WhuPlpjSOHutTm9UkE1a/x9CCuwCOgsAgtGG7gD8CKISt+ZvyK6H
qS5EHvICz6mfCyDa1QjQtyARIeq3iQQ=
=cyc4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.9
- Refresh shmobile_defconfig for v5.8-rc1
- Enable additional support for Renesas platforms to
shmobile_defconfig, multi_v7_defconfig, and the arm64 defconfig.
* tag 'renesas-arm-defconfig-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: multi_v7_defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Enable RZ/A1H RTC support
ARM: shmobile: defconfig: Enable ADV7612 CEC support
ARM: shmobile: defconfig: Enable RZ/A1 CEU support
ARM: shmobile: defconfig: Enable RZ/A watchdog support
ARM: shmobile: defconfig: Enable CAT9554 support
ARM: shmobile: defconfig: Enable DA9063 ONKEY support
ARM: shmobile: defconfig: Refresh for v5.8-rc1
Link: https://lore.kernel.org/r/20200703120642.5128-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We're missing a bunch of options related to the DRM driver options (panels,
HDMI, CEC) that seems useful. Let's add them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-5-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We've had drivers for the deinterlace and rotation engines for a while now,
let's enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-3-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We've had CSI drivers for the older and newer SoCs for a while now, let's
enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-2-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We haven't run savedefconfig for a while and some options have moved
around. In order to ease the patch application / conflict resolution, let's
run it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200705091904.42795-1-maxime@cerno.tech
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas Gigabit Ethernet Controller on R-Car V3H, as used on the
Condor and V3HSK boards,
- Sony IMX219 and OmniVision OV5645 cameras, as used on the
AISTARVISION MIPI Adapter V2.1,
- Analog Devices ADV7511 HDMI audio, as used on various boards
(Condor, Draak, Eagle, Ebisu, V3HSK, and V3MSK).
All of the above are modular, except for Ethernet support (HDMI Audio
support is an optional feature of the modular ADV7511 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200630171500.11438-1-geert+renesas@glider.be
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards,
- Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards,
- Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach
audiocamera shield expansion board,
- Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the
Koelsch and Lager boards,
- Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1
boards.
All of the above are modular (CEC support is an optional feature of the
modular ADV7604 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
Refresh the defconfig for Renesas ARM boards:
- Drop CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 (no longer
needed since commit 39c3e30456 ("ARM: 8984/1: Kconfig: set
default ZBOOT_ROM_TEXT/BSS value to 0x0")),
- Move CONFIG_MEDIA_SUBDRV_AUTOSELECT (moved in commit
1b80d36aeb ("media: Kconfig: move the position of sub-driver
autoselection")),
- Drop CONFIG_MEDIA_CONTROLLER=y and CONFIG_VIDEO_V4L2_SUBDEV_API=y
(auto-enabled since commit 32a363d0b0 ("media: Kconfig files:
use select for V4L2 subdevs and MC")),
- Enable CONFIG_MEDIA_PLATFORM_SUPPORT (needed since commit
06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200624131931.3686-2-geert+renesas@glider.be
The IPCC hardware block provides a mechanism for triggering interrupts
between co-processors in recent Qualcomm SoCs. This is used as basis for
most form of communication between co-processors, so enable this
support.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-7-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SM8250 pinctrl driver provides pin configuration, pin muxing and
GPIO pin control for many pins on the SM8250 SoC.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622220048.717073-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RPMPD provides us the CS/MX power domains needed to boot the modem
subsystem on msm8998 for wifi.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528184752.4747-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=nILH
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Three small patches to fix problems in the SELinux code, all found via
clang.
Two patches fix potential double-free conditions and one fixes an
undefined return value"
* tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix undefined return of cond_evaluate_expr
selinux: fix a double free in cond_read_node()/cond_read_list()
selinux: fix double free
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct.
- Use the noirq variants of the suspend and resume callbacks in
the Tegra driver.
- Clean up the errorpath on the MCP23s08 driver.
- Revert the use of devm_of_iomap() in the Freescale driver as
it was regressing the platform.
- Add some missing pins in the Qualcomm IPQ6018 driver.
- Fix a simple documentation bug in the pinctrl-single driver.
-----BEGIN PGP SIGNATURE-----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=g/Xm
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some early fixes collected during the first week after the merge
window, all pretty self-evident, with the details below. The revert is
the crucial thing.
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct
- Use the noirq variants of the suspend and resume callbacks in the
Tegra driver
- Clean up the errorpath on the MCP23s08 driver
- Revert the use of devm_of_iomap() in the Freescale driver as it was
regressing the platform
- Add some missing pins in the Qualcomm IPQ6018 driver
- Fix a simple documentation bug in the pinctrl-single driver"
* tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: single: fix function name in documentation
pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"
pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings
pinctrl: tegra: Use noirq suspend/resume callbacks
pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable compile
option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7vkn4VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsG69MP/Raf/dW6GEHsUu7McIM3/HmNkjKh
6oBaD3NyY2TTjL/BtM18GmUuQTfeLG60UitPYVwvzVom/88JLQYzKmLFcwEH+KMz
7Bv/UukTXq4OjcmafG/h47BMYZTZ3No4Z+kMWzHe8HU8w+adfMh578nK5JeDz/1/
wY/xn+/OeXGcpEyjpR/rS9XCxKTYdEF6NwPknHhjGK3+byn3oqsZ3yRc+WwYumOD
UvXT2KE8krCJjTQ4kKUY3Q+jzZiKEuHEEcWI6AdHLXADpUll60DBc/5OgW75+6NA
FYOU2Ocuq+D8Q8wifMBKXjhN5ci/I8/h+aGvE2M05IbXN9BqMw6sbf/SEY0j2Saq
+p2AB4hbCzrFMtUTK2Al+bhV5tPYukQQqKpIRnhZe3NwJwX3EMtmAokbBtR/oD4i
yN28JZhosCggVV3o/9wFyWzq6fr376SSoHDogAtPOefvJVRQKHmavdnHk68ixkAk
itntVrMS2T/wB5esnAMiiCY4zdWwXd+OTceN2sxgdxxXZ+IklAbJG5IemUnys9Ts
eZ1IbIaopTKriWyOIjmlKP4dVbSqHVkHSovZFACu4PcKyvpIJtZhigFQJyXIDGho
GDsrgXRRykYiG42wu1l4zHyI9O76XXqweCJobyURN/JmQ2wUPahczEROH0rPJG5H
SEr1yjd7KaMxu5mx
=IAng
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable
compile option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: watch_queue: build sample program for target architecture
Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
scripts: Fix typo in headers_install.sh
kconfig: unify cc-option and as-option
kbuild: improve cc-option to clean up all temporary files
Makefile: Improve compressed debug info support detection
One fix for the interrupt rework we did last release which broke KVM-PR.
Three commits fixing some fallout from the READ_ONCE() changes interacting badly
with our 8xx 16K pages support, which uses a pte_t that is a structure of 4
actual PTEs.
A cleanup of the 8xx pte_update() to use the newly added pmd_off().
A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled.
A minor fix for the SPU syscall generation.
Thanks to:
Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=qws5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Arnd Bergmann