handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nvme_tcp_tls_done() assigns queue->tls_err in three branches. The
ENOKEY lookup failure and the EOPNOTSUPP initializer both store
negative errnos. The third branch, reached when the handshake
layer reports a non-zero status, stores -status.
The handshake layer delivers status to the consumer callback as a
negative errno; the other in-tree consumers --
xs_tls_handshake_done() and the nvmet target callback -- treat
their status argument that way. The extra negation in
nvme_tcp_tls_done() flips the sign, leaving tls_err as a positive
value (for instance, +EIO), which nvme_tcp_start_tls() then
returns to its caller.
Drop the extra negation so queue->tls_err uniformly carries a
negative errno on failure.
Fixes: be8e82caa6 ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-2-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled.
Fixes: 675b453e02 ("nvmet-tcp: enable TLS handshake upcall")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-1-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put().
Fixes: 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260526041240.329462-1-minhnguyen.080505@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jijie Shao says:
====================
hibmcge: fix RX packet corruption issue
This series fixes an RX packet corruption issue observed when SMMU is
disabled on the hibmcge driver. The fixes include disabling PCI Relaxed
Ordering and correcting the order of DMA barrier operations in the RX
data sync path.
====================
Link: https://patch.msgid.link/20260525144525.94884-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dma_rmb() barrier was placed before dma_sync_single_for_cpu(), which
is incorrect. DMA sync must complete first to make the buffer accessible
to the CPU, then the rmb barrier ensures subsequent descriptor reads
observe the latest data written by the hardware.
Reorder the operations so dma_sync_single_for_cpu() is called before
dma_rmb() to guarantee the driver reads consistent data from the DMA
buffer.
Fixes: f72e255940 ("net: hibmcge: Implement rx_poll function to receive packets")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260525144525.94884-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When SMMU is disabled, the hibmcge driver may receive corrupted packets.
The hardware writes packet data and descriptors to the same page, but
with Relaxed Ordering enabled, PCI write transactions may not be
strictly ordered. This can cause the driver to observe a valid
descriptor before the corresponding packet data is fully written.
Fix this by clearing PCI_EXP_DEVCTL_RELAX_EN in the PCI bridge control
register to ensure strict write ordering between packet data and
descriptors.
Fixes: f72e255940 ("net: hibmcge: Implement rx_poll function to receive packets")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260525144525.94884-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jamal Hadi Salim says:
====================
net/sched: Fix packet loops in mirred and netem
This patchset adds a 2-bit per-skb tc_depth counter that travels with
the packet. The existing per-CPU mirred nest tracking loses state
when a packet is deferred through the backlog or moves between CPUs
via XPS/RPS. A per-skb field covers both cases.
Patch 1 adds the tc_depth field in a padding hole in sk_buff.
Patches 2-3 revert the check_netem_in_tree() fix and its tests,
which broke legitimate multi-netem configurations.
Patch 4 uses tc_depth to stop netem duplicate recursion.
Patch 5 uses tc_depth to catch mirred ingress redirect loops.
Patch 6 fixes the infinite loop in the mirred egress blockcast case.
Patch 7 fixes drop stats in early return error scenarios in tcf_mirred_act
for redirect (caught by Sashiko [1]).
Patches 8-9 add mirred and netem test cases.
[1] https://sashiko.dev/#/patchset/20260413082027.2244884-1-hxzene%40gmail.com
====================
Link: https://patch.msgid.link/20260525122556.973584-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a netem nested duplicate test case to validate that it won't
cause an infinite loop
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-10-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since retval is set as TC_ACT_STOLEN in the mirred redirect case, returning
retval in cases where redirect failed will make the callers not register
the skb as being dropped.
Fix this by returning TC_ACT_SHOT instead in such scenarios.
Fixes: 16085e48cb ("net/sched: act_mirred: Create function tcf_mirred_to_dev and improve readability")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260413082027.2244884-1-hxzene%40gmail.com
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-8-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcf_mirred_act() checks sched_mirred_nest against MIRRED_NEST_LIMIT (4)
to prevent deep recursion. However, when the action uses blockcast
(tcfm_blockid != 0), the function returns at the tcf_blockcast() call
BEFORE reaching the counter increment. As a result, the recursion
counter never advances and the limit check is entirely bypassed.
When two devices share a TC egress block with a mirred blockcast rule,
a packet egressing on device A is mirrored to device B via blockcast;
device B's egress TC re-enters tcf_mirred_act() via blockcast and
mirrors back to A, creating an unbounded recursion loop:
tcf_mirred_act -> tcf_blockcast -> tcf_mirred_to_dev -> dev_queue_xmit
-> sch_handle_egress -> tcf_classify -> tcf_mirred_act -> (repeat)
This recursion continues until the kernel stack overflows.
The bug is reachable from an unprivileged user via
unshare(CLONE_NEWUSER | CLONE_NEWNET): user namespaces grant
CAP_NET_ADMIN in the new network namespace, which is sufficient to
create dummy devices, attach clsact qdiscs with shared blocks, and
install mirred blockcast filters.
BUG: TASK stack guard page was hit at ffffc90000b7fff8
Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI
CPU: 2 UID: 1000 PID: 169 Comm: poc Not tainted 7.0.0-rc7-next-20260410
RIP: 0010:xas_find+0x17/0x480
Call Trace:
xa_find+0x17b/0x1d0
tcf_mirred_act+0x640/0x1060
tcf_action_exec+0x400/0x530
basic_classify+0x128/0x1d0
tcf_classify+0xd83/0x1150
tc_run+0x328/0x620
__dev_queue_xmit+0x797/0x3100
tcf_mirred_to_dev+0x7b1/0xf70
tcf_mirred_act+0x68a/0x1060
[repeating ~30+ times until stack overflow]
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by incrementing sched_mirred_nest before calling
tcf_blockcast() and decrementing it on return, mirroring the
non-blockcast path. This ensures subsequent recursive entries see the
updated counter and are correctly limited by MIRRED_NEST_LIMIT.
Fixes: fe946a751d ("net/sched: act_mirred: add loop detection")
Signed-off-by: Kito Xu (veritas501) <hxzene@gmail.com>
Link: https://patch.msgid.link/20260525122556.973584-7-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When mirred redirects to ingress (from either ingress or egress) the loop
state from sched_mirred_dev array dev is lost because of 1) the packet
deferral into the backlog and 2) the fact the sched_mirred_dev array is
cleared. In such cases, if there was a loop we won't discover it.
Here's a simple test to reproduce:
ip a add dev port0 10.10.10.11/24
tc qdisc add dev port0 clsact
tc filter add dev port0 egress protocol ip \
prio 10 matchall action mirred ingress redirect dev port1
tc qdisc add dev port1 clsact
tc filter add dev port1 ingress protocol ip \
prio 10 matchall action mirred egress redirect dev port0
ping -c 1 -W0.01 10.10.10.10
Fixes: fe946a751d ("net/sched: act_mirred: add loop detection")
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-6-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When netem duplicates a packet it re-enqueues the copy at the root qdisc.
If another netem sits in the tree the copy can be duplicated
again, recursing until the stack or memory is exhausted.
The original duplication guard temporarily zeroed q->duplicate around
the re-enqueue, but that does not cover all cases because it is
per-qdisc state shared across all concurrent enqueue paths
and is not safe without additional locking.
Use the skb tc_depth field introduced in an earlier patch:
- increment it on the duplicate before re-enqueue
- skip duplication for any skb whose tc_depth is already non-zero.
This marks the packet itself rather than mutating qdisc state,
therefore it is safe regardless of tree topology or concurrency.
Fixes: 0afb51e728 ("[PKT_SCHED]: netem: reinsert for duplication")
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Closes: https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: William Liu <will@willsroot.io>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-5-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit ecdec65ec7.
The tests added were related to check_netem_in_tree() which was
just reverted in the previous patch.
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-4-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit ec8e0e3d7a.
The original patch rejects any tree containing two netems when
either has duplication set, even when they sit on unrelated classes
of the same classful parent. That broke configurations that have
worked since netem was introduced.
The re-entrancy problem the original commit was trying to solve is
handled by later patch using tc_depth flag.
Doing this revert will (re)expose the original bug with multiple
netem duplication. When this patch is backported make sure
and get the full series.
Fixes: ec8e0e3d7a ("net/sched: Restrict conditions for adding duplicating netems to qdisc tree")
Reported-by: Ji-Soo Chung <jschung2@proton.me>
Reported-by: Gerlinde <lrGerlinde@mailfence.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220774
Reported-by: zyc zyc <zyc199902@zohomail.cn>
Closes: https://lore.kernel.org/all/19adda5a1e2.12410b78222774.9191120410578703463@zohomail.cn/
Reported-by: Manas Ghandat <ghandatmanas@gmail.com>
Closes: https://lore.kernel.org/netdev/f69b2c8f-8325-4c2e-a011-6dbc089f30e4@gmail.com/
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-3-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a 2-bit per-skb tc depth field to track packet loops across the stack.
The previous per-CPU loop counters like MIRRED_NEST_LIMIT
assume a single call stack and lose state in two cases:
1) When a packet is queued and reprocessed later (e.g., egress->ingress
via backlog), the per-cpu state is gone by the time it is dequeued.
2) With XPS/RPS a packet may arrive on one CPU and be processed on
another.
A per-skb field solves both by travelling with the packet itself.
The field fits in existing padding, using 2 bits that were previously a
hole:
pahole before(-) and after (+) diff looks like:
__u8 slow_gro:1; /* 132: 3 1 */
__u8 csum_not_inet:1; /* 132: 4 1 */
__u8 unreadable:1; /* 132: 5 1 */
+ __u8 tc_depth:2; /* 132: 6 1 */
- /* XXX 2 bits hole, try to pack */
/* XXX 1 byte hole, try to pack */
__u16 tc_index; /* 134 2 */
There used to be a ttl field which was removed as part of tc_verd in commit
aec745e2c5 ("net-tc: remove unused tc_verd fields"). It was already
unused by that time, due to remove earlier in commit c19ae86a51 ("tc: remove
unused redirect ttl").
The first user of this field is netem, which increments tc_depth on
duplicated packets before re-enqueueing them at the root qdisc. On
re-entry, netem skips duplication for any skb with tc_depth already set,
bounding recursion to a single level regardless of tree topology.
The other user is mirred which increments it on each pass
and limits to depth to MIRRED_DEFER_LIMIT (3).
The new field was called ttl in earlier versions of this patch
but renamed to tc_depth to avoid confusion with IP ttl.
Note (looking at you Sashiko! Dont ignore me and continue bringing this up):
1. Since both mirred and netem utilize the same 2-bit tc_depth field it is
possible when netem and mirred are used together that netem qdisc to skip
the duplication step. This is a known trade-off, as a 2-bit field cannot
independently track both features' recursion depths and it is not considered
sane to have a setup that addresses both features on at the same time.
2. skb_scrub_packet does not clear tc_depth. This means a packet's loop history
is preserved even across namespaces. While this might be restrictive for
some topologies, it is also design intent to provide robustness against loops
across namespaces.
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260525122556.973584-2-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment.
Fixes: 8610c7c6e3 ("net: ipv6: add support for rpl sr exthdr")
Signed-off-by: Rahul Chandelkar <rc@rexion.ai>
Link: https://patch.msgid.link/20260525154031.2290876-1-rc@rexion.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ethtool: more bug fixes
Last week I sent two patch sets - one fixing bugs in RSS handling,
and one fixing CMIS / module handling. This set contains the remaining
fixes. There's a concentration of fixes around PHY and timestamp config
handling but not enough to break those out as separate sets.
====================
Link: https://patch.msgid.link/20260526153533.2779187-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All ethtool driver op calls should be sandwiched between
ethnl_ops_begin() / ethnl_ops_complete(). In Netlink eeprom code,
if the paged access failed we fall back to old API, but we
first call _complete() and the fallback never does its own
ethnl_ops_begin(). Move the fallback into the _begin() / _complete()
section.
Fixes: 96d971e307 ("ethtool: Add fallback to get_module_eeprom from netlink command")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strset_prepare_data() passes ETHTOOL_A_HEADER_FLAGS (3) as the header
attribute to ethnl_req_get_phydev(). This is incorrect, in the main
attr space 3 is ETHTOOL_A_STRSET_COUNTS_ONLY, not the request
header attr. The correct constant is ETHTOOL_A_STRSET_HEADER (1).
ethnl_req_get_phydev() only uses this value for the extack,
so this is not a "functionally visible"(?) bug.
Fixes: e96c93aa4b ("net: ethtool: strset: Allow querying phy stats by index")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsinfo_prepare_data() has two code paths: a "by-PHC" path for
user-specified hardware timestamping providers, and the old path.
Commit 89e281ebff ("ethtool: init tsinfo stats if requested") added
ethtool_stats_init() to mark stat slots as ETHTOOL_STAT_NOT_SET before
the driver callback populates them, but placed the call inside the
old-path block.
When commit b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to
support several hwtstamp by net topology") added the by-PHC early
return, it landed above the stats initialization. On that path
the stats array retains the zero-fill from ethnl_init_reply_data()'s
zalloc. This leads to the reply including a stats nest with four
zero-valued attributes that should have been absent.
Reject GET requests for stats with HWTSTAMP_PROVIDER or dump.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call
ethnl_ops_complete() before returning the error.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pse_prepare_data() is missing ethnl_ops_complete() if
ethnl_req_get_phydev() returned an error. Move getting
phydev up so that we don't have to worry about this
(similar order to linkstate_prepare_data()).
Note that phydev may still be NULL (this is checked in
pse_get_pse_attributes()), the goal isn't really to avoid
the _begin() / _complete() calls, only to simplify the error
handling.
While at it propagate the original error. Why this code
overrides the error with -ENODEV but !phydev generates
-EOPNOTSUPP is unclear to me...
Fixes: 31748765be ("net: ethtool: pse-pd: Target the command to the requested PHY")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linkstate_prepare_data() calls ethnl_req_get_phydev() before
ethnl_ops_begin(), but routes its error path through "goto out"
which calls ethnl_ops_complete().
Fixes: fe55b1d401 ("ethtool: linkstate: migrate linkstate functions to support multi-PHY setups")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A couple of trivial bugs in error handling in tsconfig_send_reply().
If we failed to allocate rskb we need to set the error.
If we did allocate it but failed to send it - we need to remember
to free it.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries).
Fixes: f750dfe825 ("ethtool: provide customized dim profile management")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260526153533.2779187-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
bridge: Fix sleep in atomic context
Under certain circumstances the bridge driver can call
dev_set_promiscuity() while holding the bridge spin lock. This is a
problem as dev_set_promiscuity() might sleep.
Patches #1-#2 fix the problem in the netlink and sysfs configuration
paths by only taking the lock where it is actually needed, thereby
avoiding calling dev_set_promiscuity() from an atomic context.
Patch #3 adds test cases for both configuration paths in rtnetlink.sh
which already includes test cases for similar issues.
Note that dev_set_promiscuity() can sleep either when it takes the net
device mutex or when calling netif_rx_mode_sync(). I encountered the
problem with the latter, but blamed the former since it came earlier.
====================
Link: https://patch.msgid.link/20260526064818.272516-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two test cases that always pass, but trigger sleeping in atomic
context BUGs without "bridge: Fix sleep in atomic context in netlink
path" and "bridge: Fix sleep in atomic context in sysfs path".
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526064818.272516-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526064818.272516-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260526064818.272516-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a kernel paging request crash in
can_rx_unregister() inside net/can/af_can.c. The crash occurs
because a virtual CAN device (vxcan) is being enslaved to a
bonding master.
During the enslavement process, the bonding driver mutates
and modifies the network device states to fit an Ethernet-like
aggregation model. However, CAN devices operate on a completely
different Layer 2 architecture, relying on the CAN mid-layer
private data structure (can_ml_priv) instead of standard
Ethernet structures. Since bonding does not initialize or
maintain these CAN structures, subsequent operations on the
half-enslaved interface (such as closing associated sockets
via isotp_release) lead to a null-pointer dereference when
accessing the CAN receiver lists.
Bonding CAN interfaces is architecturally invalid as CAN lacks
MAC addresses, ARP capabilities, and standard Ethernet
link-layer mechanisms. While generic loopback devices are
blocked globally in net/core/dev.c, virtual CAN devices
bypass this check because they do not carry the IFF_LOOPBACK
flag, despite acting as local software-loopbacks.
Fix this by explicitly blocking network devices of type
ARPHRD_CAN from being enslaved at the very beginning of
bond_enslave(). This prevents illegal state mutations,
eliminates the resulting KASAN crashes, and avoids potential
memory leaks from incomplete socket cleanups.
As the CAN support has been added a long time after bonding
the Fixes-tag points to the introduction of ARPHRD_CAN that
would have needed a specific handling in bonding_main.c.
Fixes: cd05acfe65 ("[CAN]: Allocate protocol numbers for PF_CAN")
Reported-by: syzbot+8ed98cbd0161632bce95@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8ed98cbd0161632bce95
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260526-bonding-candev-v1-1-ba1df400918a@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR}
cmsgs (and their IPV6_2292* legacy counterparts) by trusting the
on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length.
The length was validated only at parse time (ipv6_parse_hopopts(),
etc.). An nftables payload-write expression can rewrite hdrlen after
parsing and before the skb reaches recvmsg; the write itself is
in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040
bytes from an 8-byte header. nftables is reachable from an
unprivileged user namespace, so this is an unprivileged
slab-out-of-bounds read:
BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540
put_cmsg+0x3ac/0x540
udpv6_recvmsg+0xca0/0x1250
sock_recvmsg+0xdf/0x190
____sys_recvmsg+0x1b1/0x620
Add ipv6_get_exthdr_len() which validates that at least two bytes
are accessible before reading the hdrlen field, then checks the
computed length against skb_tail_pointer(skb), returning 0 on
failure. Extension headers are kept in the linear skb area by
pskb_may_pull() during input, so skb_tail_pointer() is the correct
bound.
Use ipv6_get_exthdr_len() at all non-AH call sites: the five
standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR)
and the three standard cases in the extension-header walk loop
(DSTOPTS, ROUTING, default). AH retains an inline bounds check
because its length formula differs ((ptr[1]+2)<<2).
The walk loop also gets a pre-read bounds check at the top to
validate ptr before any case accesses ptr[0] or ptr[1].
When the walk loop detects a corrupted header, return from the
function instead of continuing to process later socket options.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260523143245.2281415-1-tpluszz77@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, iptunnel_pmtud_check_icmp() can be called while
skb transport header is not set.
This triggers an out-of-bound access, because
(typeof(skb->transport_header))~0U is 65535.
Access the icmp header based on IPv4 network header,
after making sure icmp->type is present in skb linear part.
Note that iptunnel_pmtud_check_icmpv6()) is fine.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260522115512.1519110-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_tunnel_check_pmtu() can change skb->head.
Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF.
Use instead ip_hdr(skb) as done in drivers/net/bareudp.c
and drivers/net/geneve.c.
Found by Sashiko.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260525203642.2389723-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed.
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260525201335.2361845-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AN8811HB needs a MCU soft-reset cycle before firmware loading begins.
Assert the MCU (hold it in reset) and immediately deassert (release)
via a dedicated PBUS register pair (0x5cf9f8 / 0x5cf9fc), accessed
through a registered mdio_device at PHY-addr+8.
Add __air_pbus_reg_write() as a low-level helper taking a struct
mdio_device *, create and register the PBUS mdio_device in
an8811hb_probe() and store it in priv->pbusdev, then implement
an8811hb_mcu_assert() / _deassert() on top of it. Add
an8811hb_remove() to unregister the PBUS device on teardown. Wire
both calls into an8811hb_load_firmware() and en8811h_restart_mcu()
so every firmware load or MCU restart on AN8811HB correctly sequences
the reset control registers.
Fixes: 5afda1d734 ("net: phy: air_en8811h: add Airoha AN8811HB support")
Signed-off-by: Lucien Jheng <lucienzx159@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260524063915.47961-1-lucienzx159@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A reader in l2tp_session_get_by_ifname() can return a pointer to a
session whose refcount has reached zero. The getter takes its
reference with plain refcount_inc(), but every other session getter
in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the
corresponding _get_next variants) uses refcount_inc_not_zero()
because the IDR/RCU lookup can race with refcount_dec_and_test() ->
l2tp_session_free() -> kfree_rcu(). The ifname getter is the only
outlier; the inconsistency was raised on-list after 979c017803
("l2tp: use list_del_rcu in l2tp_session_unhash").
A reader inside rcu_read_lock_bh() that matches session->ifname can
be preempted between the strcmp() and the refcount_inc(). If the
last reference drops on another CPU in that window, the reader's
refcount_inc() runs on a counter that has reached zero. refcount_t
catches the addition-on-zero, prints "refcount_t: addition on 0;
use-after-free", saturates the counter, and returns the saturated
pointer to the caller. Session memory is held live by the in-flight
RCU read section, but the kfree_rcu() callback queued from
l2tp_session_free() will free it once the grace period closes; a
caller that dereferences the returned session past that point hits
a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU
sleeping lock and the preemption window is real; on stock PREEMPT
kernels local_bh_disable() is a preempt_count increment that closes
the cross-CPU race in practice (see below).
Use refcount_inc_not_zero() and continue the list walk on failure,
matching the other session getters in the file. The ifname getter
is the only session getter in net/l2tp/ that still uses the bare
refcount_inc() pattern; this change restores file-internal
consistency. The success path is unchanged.
Fixes: abe7a1a7d0 ("l2tp: improve tunnel/session refcount helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260523023423.2568972-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ethtool: module: fix a handful of small bugs
I've been poking at the locking in ethtool and it appears
that the FW flashing is not currently taking the ops lock.
Existing drivers which implement module FW flashing seem
to have their own locking, so this series doesn't actually
add the ops lock (I'll add it in net-next). But a number
of other errors have been surfaced in the process.
====================
Link: https://patch.msgid.link/20260522231312.1710836-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cmis_fw_update_start_download() copies start_cmd_payload_size bytes
from the firmware blob into the CDB LPL vendor_data[] payload without
validating that the FW has enough data.
Since the start_cmd_payload_size can only be ~120B an image too short
is most likely corrupted, so reject it.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there.
Fixes: c4f78134d4 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_cmis_cdb_compose_args() accepts msleep_pre_rpl as u16 but stores
it into the u8 field ethtool_cmis_cdb_cmd_args::msleep_pre_rpl, silently
truncating values >= 256. Seven of the nine call sites pass 1000 ms
(it's the third argument from the end).
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming.
Fixes: a39c84d796 ("ethtool: cmis_cdb: Add a layer for supporting CDB commands")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single Netlink socket issues MODULE_FW_FLASH_ACT against multiple
devices, ethnl_sock_priv_set() overwrites sk_priv->dev on each call,
retaining only the last one. The socket priv is used on socket close,
to walk the global work list and mark the uncompleted flashing work
as "orphaned". Otherwise if another socket reuses the PID it will
unexpectedly receive the flashing notifications.
Don't record the device, record net pointer instead. The purpose of
the dev is to scope the work to a netns, anyway. If we store netns
the overrides are safe/a nop since all flashed devices must be in
the same netns as the socket.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl_set_module_validate() inspects module_fw_flash_in_progress
but validate is meant for _input_ validation, not state validation.
rtnl_lock is not held, yet. Move the check into ethnl_set_module().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reviewing other changes Gemini points out that we currently
update module_fw_flash_in_progress without holding any locks.
Since module_fw_flash_in_progress is part of a bitfield this
is not great, updates to other fields may be lost.
We could use a bool and sprinkle some READ_ONCE/WRITE_ONCE here
but seems like the issue is rather than the work is an unusual
writer. The other writers already hold the right locks. So just
very briefly take these locks when the work completes.
Note that nothing ever cancels the FW update work, so there's
no concern with deadlocks vs cancel.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chuck Lever