Every 30 seconds, dm-bufio evicts all buffers that were not accessed
within the last max_age_seconds, except those pinned in memory via
retain_bytes. By default max_age_seconds is 300 (i.e. 5 minutes), and
retain_bytes is 262144 (i.e. 256 KiB) per dm-bufio client.
This eviction algorithm is much too eager and is also redundant with the
shinker based eviction.
Testing on an Android phone shows that about 30 MB of dm-bufio buffers
(from dm-verity Merkle tree blocks) are loaded at boot time, and then
about 90% of them are suddenly thrown away 5 minutes after boot. This
results in unnecessary Merkle tree I/O later.
Meanwhile, if the system actually encounters memory pressure, testing
also shows that the shrinker is effective at evicting the buffers.
Other major Linux kernel caches, such as the page cache, do not enforce
a maximum age, instead relying on the shrinker.
For these reasons, Android is now setting max_age_seconds to 86400
(i.e. 1 day), which mostly disables it; see
cadad290a7%5E%21/
That is a much better default, but really the maximum age based eviction
should not exist at all. Let's remove it.
Note that this also eliminates the need to run work every 30 seconds,
which is beneficial too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Further limit verification in softirq (a.k.a. BH) context to cases where
rescheduling of the interrupted task is not pending.
This helps prevent the CPU from spending too long in softirq context.
Note that handle_softirqs() in kernel/softirq.c already stops running
softirqs in this same case. However, that check is too coarse-grained,
since many I/O requests can be processed in a single BLOCK_SOFTIRQ.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Lock queue limits when reading them, so that we don't read halfway
modified values.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
A small code cleanup: use blk_queue_disable_discard and
blk_queue_disable_write_zeroes instead of disable_discard and
disable_write_zeroes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When using a kthread to delay the IOs, dm-delay would continuously loop,
checking if IOs were ready to submit. It had a cond_resched() call in
the loop, but might still loop hundreds of millions of times waiting for
an IO that was scheduled to be submitted 10s of ms in the future. With
the change to make dm-delay over zoned devices always use kthreads
regardless of the length of the delay, this wasted work only gets worse.
To solve this and still keep roughly the same precision for very short
delays, dm-delay now calls fsleep() for 1/8th of the smallest non-zero
delay it will place on IOs, or 1 ms, whichever is smaller. The reason
that dm-delay doesn't just use the actual expiration time of the next
delayed IO to calculated the sleep time is that delay_dtr() must wait
for the kthread to finish before deleting the table. If a zoned device
with a long delay queued an IO shortly before being suspended and
removed, the IO would be flushed in delay_presuspend(), but the removing
the device would still have to wait for the remainder of the long delay.
This time is now capped at 1 ms.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If a DM device that can pass down zone append commands is stacked on top
of a device that emulates zone append commands, it will allocate zone
append emulation resources, even though it doesn't use them. This is
because the underlying device will have max_hw_zone_append_sectors set
to 0 to request zone append emulation. When the DM device is stacked on
top of it, it will inherit that max_hw_zone_append_sectors limit,
despite being able to pass down zone append bios. Solve this by making
sure max_hw_zone_append_sectors is non-zero for DM devices that do not
need zone append emulation.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_revalidate_zones() only allowed new or previously unzoned devices to
call blk_revalidate_disk_zones(). If the device was already zoned,
disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones()
returned without doing any work. This would make the zoned settings for
the device not match the new table. If the device had zone write plug
resources, it could run into errors like bdev_zone_is_seq() reading
invalid memory because disk->conv_zones_bitmap was the wrong size.
If the device doesn't have any zone write plug resources, calling
blk_revalidate_disk_zones() will always correctly update device. If
blk_revalidate_disk_zones() fails, it can still overwrite or clear the
current disk->nr_zones value. In this case, DM must restore the previous
value of disk->nr_zones, so that the zoned settings will continue to
match the previous value that it fell back to.
If the device already has zone write plug resources,
blk_revalidate_disk_zones() will not correctly update them, if it is
called for arbitrary zoned device changes. Since there is not much need
for this ability, the easiest solution is to disallow any table reloads
that change the zoned settings, for devices that already have zone plug
resources. Specifically, if a device already has zone plug resources
allocated, it can only switch to another zoned table that also emulates
zone append. Also, it cannot change the device size or the zone size. A
device can switch to an error target.
Fixes: bb37d77239 ("dm: introduce zone append emulation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If dm_get_live_table() returned NULL, dm_put_live_table() was never
called. Also, it is possible that md->zone_revalidate_map will change
while calling this function. Only read it once, so that we are always
using the same value. Otherwise we might miss a call to
dm_put_live_table().
Finally, while md->zone_revalidate_map is set and a process is calling
blk_revalidate_disk_zones() to set up the zone append emulation
resources, it is possible that another process, perhaps triggered by
blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If
blk_revalidate_disk_zones() fails, these resources can be freed while
the other process is still using them, causing a use-after-free error.
blk_revalidate_disk_zones() will only ever be called when initially
setting up the zone append emulation resources, such as when setting up
a zoned dm-crypt table for the first time. Further table swaps will not
set md->zone_revalidate_map or call blk_revalidate_disk_zones().
However it must be called using the new table (referenced by
md->zone_revalidate_map) and the new queue limits while the DM device is
suspended. dm_blk_report_zones() needs some way to distinguish between a
call from blk_revalidate_disk_zones(), which must be allowed to use
md->zone_revalidate_map to access this not yet activated table, and all
other calls to dm_blk_report_zones(), which should not be allowed while
the device is suspended and cannot use md->zone_revalidate_map, since
the zone resources might be freed by the process currently calling
blk_revalidate_disk_zones().
Solve this by tracking the process that sets md->zone_revalidate_map in
dm_revalidate_zones() and only allowing that process to make use of it
in dm_blk_report_zones().
Fixes: f211268ed1 ("dm: Use the block layer zone append emulation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
If dm_table_set_restrictions() fails while swapping tables,
device-mapper will continue using the previous table. It must be sure to
leave the mapped_device in it's previous state on failure. Otherwise
device-mapper could end up using the old table with settings from the
unused table.
Do not update the mapped device in dm_set_zones_restrictions(). Wait
till after dm_table_set_restrictions() is sure to succeed to update the
md zoned settings. Do the same with the dax settings, and if
dm_revalidate_zones() fails, restore the original queue limits.
Fixes: 7f91ccd8a6 ("dm: Call dm_revalidate_zones() after setting the queue limits")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
With request-based dm, the mempools don't need reloading when switching
tables, but the unused table mempools are not freed until the active
table is finally freed. Free them immediately if they are not needed.
Fixes: 29dec90a0f ("dm: fix bio_set allocation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
__bind was changing the disk capacity, geometry and mempools of the
mapped device before calling dm_table_set_restrictions() which could
fail, forcing dm to drop the new table. Failing here would leave the
device using the old table but with the wrong capacity and mempools.
Move dm_table_set_restrictions() earlier in __bind(). Since it needs the
capacity to be set, save the old version and restore it on failure.
Fixes: bb37d77239 ("dm: introduce zone append emulation")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/
Fixes: c9fbaa8795 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixes: 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
Signed-off-by: Len Brown <len.brown@intel.com>
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
1) A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
2) A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64 out
of tree.
The code assumes that hierarchical interrupt domains are enabled and
dereferences irq_data::parent_data unconditionally. That works in mainline
because both architectures which enable that code have hierarchical domains
enabled. Though it breaks the ia64 build, which enables the functionality,
but does not have hierarchical domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which has
the appropriate #ifdeffery in place.
-----BEGIN PGP SIGNATURE-----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=lhoB
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
The recent change to prevent that time goes backwards for the coarse time
getters due to immediate multiplier adjustments via adjtimex(), changed the
way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is user
space visible:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one. That's changing the behaviour of the
[PF]LL control, which user space expects to be applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
It was tried to delay the multiplier/frequency update to the next tick, but
that did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available, so
revert the offending commit to restore the existing adjtimex() behaviour.
-----BEGIN PGP SIGNATURE-----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=0MEH
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary
-----BEGIN PGP SIGNATURE-----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=96YN
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f7525 ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
-----BEGIN PGP SIGNATURE-----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=GiQ6
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup
-----BEGIN PGP SIGNATURE-----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=P/sW
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly from the end of last week, this week was very
quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
with some i915, adp and bridge bits, since I think this is overly
quiet I'd expect rc2 to be a bit more lively.
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup"
# -----BEGIN PGP SIGNATURE-----
* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
drm/amdgpu/gfx12: fix num_mec
drm/amdgpu/gfx11: fix num_mec
drm/amd/pm: Add gpu_metrics_v1_8
drm/amdgpu: Prefer shadow rom when available
drm/amd/pm: Update smu metrics table for smu_v13_0_6
drm/amd/pm: Remove host limit metrics support
Remove unnecessary firmware version check for gc v9_4_2
drm/amdgpu: stop unmapping MQD for kernel queues v3
Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
drm/amdgpu: Parse all deferred errors with UMC aca handle
drm/amdgpu: Update ta ras block
drm/amdgpu: Add NPS2 to DPX compatible mode
drm/amdgpu: Use correct gfx deferred error count
drm/amd/display: Actually do immediate vblank disable
drm/amd/display: prevent hang on link training fail
Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
drm/amd/display: Increase vblank offdelay for PSR panels
drm/amd: Handle being compiled without SI or CIK support better
drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
...
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
# stap -e 'probe kernel.function("do_sys_open").call { printf("%s\n", $$parms); }'
dfd=0xffffffffffffff9c filename=0x7fe18800b160 flags=0x88800 mode=0x0
...
2. disas /s works correctly in gdb, with source and disassembly
interspersed:
# gdb vmlinux --batch -ex 'disas /s blk_op_str'
Dump of assembler code for function blk_op_str:
block/blk-core.c:
125 {
0xffffffff814c8740 <+0>: endbr64
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8744 <+4>: mov $0xffffffff824a7378,%rax
0xffffffff814c874b <+11>: cmp $0x23,%edi
0xffffffff814c874e <+14>: ja 0xffffffff814c8768 <blk_op_str+40>
0xffffffff814c8750 <+16>: mov %edi,%edi
126 const char *op_str = "UNKNOWN";
0xffffffff814c8752 <+18>: mov $0xffffffff824a7378,%rdx
127
128 if (op < ARRAY_SIZE(blk_op_name) && blk_op_name[op])
0xffffffff814c8759 <+25>: mov -0x7dfa0160(,%rdi,8),%rax
126 const char *op_str = "UNKNOWN";
0xffffffff814c8761 <+33>: test %rax,%rax
0xffffffff814c8764 <+36>: cmove %rdx,%rax
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 654102df2a ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This option was removed from Kconfig in 8c710f7525 ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f7525 ("net/sched: Retire tcindex classifier")
Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
The function hrtimer_init() doesn't exist anymore. It was replaced by
hrtimer_setup().
Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it
consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/073cf6162779a2f5b12624677d4c49ee7eccc1ed.1738746927.git.namcao@linutronix.de
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/807694aedad9353421c4a7347629a30c5c31026f.1738746927.git.namcao@linutronix.de
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/4661c571ee87980c340ccc318fc1a473c0c8f6bc.1738746927.git.namcao@linutronix.de
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/7d0e6e0c5c59a64a9bea940051aac05d750bc0c2.1738746927.git.namcao@linutronix.de
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/d9a45a51b6a8aa0045310d63f73753bf6b33f385.1738746927.git.namcao@linutronix.de
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Coccinelle scripted cleanup.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Biggers