ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present.
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code.
Fixes: 1241c5650f ("wifi: wilc1000: Fill in missing error handling")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260511042732.998311-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260509043427.60322-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing a beacon, mac80211 erroneously inherits any
reconfiguration or EPCS multi-link elements from the outer
elements into the multi-BSSID profile that's requested, if
connected to a non-transmitted BSS, unless that profile
has a non-inheritance element.
This also happens if parsing a multi-BSSID profile that
doesn't have a non-inheritance element.
Fix this by having an empty non-inheritance element so
cfg80211_is_element_inherited() is invoked in these cases
and causes the parser to skip the elements that should
never be inherited.
Fixes: cf36cdef10 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element")
Fixes: 24711d60f8 ("wifi: mac80211: Support parsing EPCS ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.
Fixes: 4d70e9c548 ("wifi: mac80211: defragment reconfiguration MLE when parsing")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In client mode, the extended capabilities are handled by the kernel
looking at the association frame. When the supplicant installs the keys
it calls sta_apply_parameters and it doesn't include the extended
capabilities since those can't change after association.
As a result, we overrode the max_amsdu_subframes that we set after
association.
Check that the ext_capa coming from the user space is valid before
looking at it. If the ext_capa is NULL, it really means that the
extended capabilities are not changed (as opposed to cleared).
The default value for max_amsdu_subframes is 0, which means there is no
limit. This value is valid and in case the association response frame
does not have extended capabilities, this is the value we should use.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221079
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513170623.828dbb58c782.Ifd2bfc190c26140e919127adb02ffddd7b551499@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d83 ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration").
Fixes: de86c5f608 ("wifi: mac80211: Add support for EPCS configuration")
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260515102908.1653088-1-hossu.alexandru@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way.
Cc: stable@vger.kernel.org
Fixes: fe806e4992 ("cfg80211: support profile split between elements")
Signed-off-by: John Walker <johnwalker0@gmail.com>
Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that
IPv6 itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi: cw1200: revert "Fix locking in error paths"
- wifi: ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix: fix an issue between garbage collection and PEEK
- af_unix: fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmn8whsACgkQMUZtbf5S
IrtH+w//SEA3x/LuhHYW7dAr6j+yF5YXnGQ5+DlvUI2N5MzzLRKZqPQB9XSNzQEv
Ptq8XAoNY+ItZft8GjTGOQddMDPYi+sS43Lt5t2W1Fq74tUkI+9YEPin0WH9WapQ
uy7e9/15/gJW+3jQeCg4KYMwf65THCUhoSNZO5ORIeVuT/m0OdsoVLNwuM6zjzNZ
hwOGWZDFn06M0tm8oL2LnE9D/iXqztgnHhcSVMe5X3uCgK7EHMySjmj4JsjdEV6R
9U83zG+5/VKjVc7fGiozCiYk5ctiGYFMhvLUDZtdxNpf95rVRpCWu2TNx4gsCh9E
QaOarvqHXTrrG4bz57vN7Bcegcjk+5GvREIPNznEWfMN+k3Tft9x+wEHP5MGBbn3
K+2JGoNF7aTQGlBuH/szPdHh3m0V3oTRu1azisY0NiAGUKHageQAch6uHTm/7ixj
iNmOQ/aY10ITlhUqmTN2jHdl+8bgtMOmaV9zyn5588UWakVu+5zUGTtxjefrxMiQ
bYTs9Ya54BM5dKVT1tbgKs6ZY+shb8Erncd8vr0ltUmp8UW4Ovz6FxQ9tRP7tAaV
vRAQYWE50751YUjqwJJShWpKAlWJlJ0jELEsYYXNeeBbmpMYLm9vgGf7+2TNXToE
0dth3eJTGhzYYDqqgC9Q2ZlkbhdCMWotde9vMUGdhiErgorKsqs=
=ogzY
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, IPsec, Bluetooth and WiFi.
Current release - fix to a fix:
- ipmr: add __rcu to netns_ipv4.mrt, make sure we hold the RCU lock
in all relevant places
Current release - new code bugs:
- fixes for the recently added resizable hash tables
- ipv6: make sure we default IPv6 tunnel drivers to =m now that IPv6
itself is built in
- drv: octeontx2-af: fixes for parser/CAM fixes
Previous releases - regressions:
- phy: micrel: fix LAN8814 QSGMII soft reset
- wifi:
- cw1200: revert "Fix locking in error paths"
- ath12k: fix crash on WCN7850, due to adding the same queue
buffer to a list multiple times
Previous releases - always broken:
- number of info leak fixes
- ipv6: implement limits on extension header parsing
- wifi: number of fixes for missing bound checks in the drivers
- Bluetooth: fixes for races and locking issues
- af_unix:
- fix an issue between garbage collection and PEEK
- fix yet another issue with OOB data
- xfrm: esp: avoid in-place decrypt on shared skb frags
- netfilter: replace skb_try_make_writable() by skb_ensure_writable()
- openvswitch: vport: fix race between tunnel creation and linking
leading to invalid memory accesses (type confusion)
- drv: amd-xgbe: fix PTP addend overflow causing frozen clock
Misc:
- sched/isolation: make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
(for relevant IPVS change)"
* tag 'net-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (190 commits)
net: sparx5: configure serdes for 1000BASE-X in sparx5_port_init()
net: sparx5: fix wrong chip ids for TSN SKUs
net: stmmac: dwmac-nuvoton: fix NULL pointer dereference in nvt_set_phy_intf_sel()
tcp: Fix dst leak in tcp_v6_connect().
ipmr: Call ipmr_fib_lookup() under RCU.
net: phy: broadcom: Save PHY counters during suspend
net/smc: fix missing sk_err when TCP handshake fails
af_unix: Reject SIOCATMARK on non-stream sockets
veth: fix OOB txq access in veth_poll() with asymmetric queue counts
eth: fbnic: fix double-free of PCS on phylink creation failure
net: ethernet: cortina: Drop half-assembled SKB
selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl
selftests: mptcp: check output: catch cmd errors
mptcp: pm: prio: skip closed subflows
mptcp: pm: ADD_ADDR rtx: return early if no retrans
mptcp: pm: ADD_ADDR rtx: skip inactive subflows
mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker
mptcp: pm: ADD_ADDR rtx: free sk if last
mptcp: pm: ADD_ADDR rtx: always decrease sk refcount
mptcp: pm: ADD_ADDR rtx: fix potential data-race
...
sparx5_port_init() only invokes sparx5_serdes_set() and the associated
shadow-device enable and low-speed device switch for SGMII and QSGMII.
On any port with a high-speed primary device (DEV5G/DEV10G/DEV25G)
configured for 1000BASE-X the serdes is therefore left uninitialized,
the DEV2G5 shadow is never enabled, and the port stays pointed at its
high-speed device rather than the DEV2G5. The PCS1G block looks
healthy in isolation, but no frames reach the link partner.
Add 1000BASE-X to the check so the same three steps run.
Note: the same issue might apply to 2500BASE-X, but that will,
eventually, be addressed in a separate commit.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 946e7fd505 ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-4-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TSN SKUs in enum spx5_target_chiptype have incorrect IDs:
SPX5_TARGET_CT_7546TSN = 0x47546,
SPX5_TARGET_CT_7549TSN = 0x47549,
SPX5_TARGET_CT_7552TSN = 0x47552,
SPX5_TARGET_CT_7556TSN = 0x47556,
SPX5_TARGET_CT_7558TSN = 0x47558,
The value read back from the chip is GCB_CHIP_ID_PART_ID, which is a
GENMASK(27, 12) field, i.e. at most 16 bits wide. It can never match
these IDs, so probing a TSN part fails with a "Target not supported"
error.
Fix the enum to use the actual 16-bit part IDs returned by the
hardware: 0x0546, 0x0549, 0x0552, 0x0556 and 0x0558.
Reported-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260506-misc-fixes-sparx5-lan969x-v2-3-fb236aa96908@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
* Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
* ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
* HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
* USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
* Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest
-----BEGIN PGP SIGNATURE-----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=prTy
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again a collection of small fixes, mostly for device-specific ones.
The only big LOC is about the removal of pretty old dead code in
ab8500 codec driver, while the rest all nice small changes.
Core / API:
- Fix race in deferred fasync state checks
- Fix UMP group filtering in sequencer
ASoC:
- cs35l56: fixes for driver cleanup and error paths
- tas2764/2770: workaround for bogus temperature readings
- wm_adsp: fixes for firmware unit tests
- amd-yc: more DMI quirks for laptops
- Minor fixes for fsl_xcvr and spacemit
HD-Audio:
- Mute LED and speaker quirks for HP, Lenovo, and Xiaomi laptops
USB-audio:
- New device-specific quirks (Motu, JBL, AlphaTheta, Razer)
- Fix of MIDI2 playback on resume
Others:
- Firewire-tascam control event fix
- Minor cleanups and fixes for sparc/dbri and pcmtest"
* tag 'sound-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: cs35l56: Destroy workqueue in probe error path
ASoC: cs35l56: Don't use devres to unregister component
ALSA: sparc/dbri: add missing fallthrough
ALSA: core: Serialize deferred fasync state checks
ALSA: hda/realtek: Add mute LED fixup for HP Pavilion 15-cs1xxx
ALSA: seq: Fix UMP group 16 filtering
ASoC: wm_adsp_fw_find_test: Clear searched_fw_files in find-by-index test
ASoC: wm_adsp_fw_find_test: Redirect wm_adsp_release_firmware_files()
ASoC: tas2770: Deal with bogus initial temperature value
ASoC: tas2764: Deal with bogus initial temperature register value
ALSA: usb-audio: add clock quirk for Motu 1248
ALSA: usb-audio: midi2: Restart output URBs on resume
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 15-fh0xxx
ALSA: usb-audio: Add quirk flags for JBL Pebbles
ALSA: firewire-tascam: Do not drop unread control events
ALSA: usb-audio: Add quirk flags for AlphaTheta EUPHONIA
ASoC: fsl_xcvr: Fix event generation for cached controls
ASoC: sdw_utils: avoid the SDCA companion function not supported failure
ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table
ASoC: cs35l56: Fix out-of-bounds in dev_err() in cs35l56_read_onchip_spkid()
...
Fixes
- hp-wmi: silence unknown board warning for 8D41
- lenovo/wmi-other: Fix uninitialized variable in fan RPM handling
- wmi: Check min_size also when ACPI does not return an out object
The following is an automated shortlog grouped by driver:
hp-wmi:
- silence unknown board warning for 8D41
lenovo: wmi-other:
- Fix uninitialized variable in lwmi_om_hwmon_write()
wmi:
- Fix unchecked min_size in wmidev_invoke_method()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCafx4pgAKCRBZrE9hU+XO
MerAAP9ALfDumabgsXGDibvB5700w4oXxKpf+NS/O0RGlKSpigD/bvo4xIut5Qow
xYZfEhYkRUyd0bSQwYh5i7fS8am7Nw8=
=Lais
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Silence unknown board warning for 8D41 (hp-wmi)
- Fix uninitialized variable in fan RPM handling (lenovo/wmi-other)
- Check min_size also when ACPI does not return an out object (wmi)
* tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo: wmi-other: Fix uninitialized variable in lwmi_om_hwmon_write()
platform/x86: hp-wmi: silence unknown board warning for 8D41
platform/wmi: Fix unchecked min_size in wmidev_invoke_method()
priv->dev was never initialized after devm_kzalloc() allocates the
private data structure. When nvt_set_phy_intf_sel() is later invoked
via the phylink interface_select callback, it calls
nvt_gmac_get_delay(priv->dev, ...) which dereferences the NULL pointer.
Fix this by assigning priv->dev = dev immediately after allocation.
Fixes: 4d7c557f58 ("net: stmmac: dwmac-nuvoton: Add dwmac glue for Nuvoton MA35 family")
Signed-off-by: Joey Lu <a0987203069@gmail.com>
Link: https://patch.msgid.link/20260506084614.192894-2-a0987203069@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a socket is bound to a wildcard address, tcp_v[46]_connect()
updates it with a non-wildcard address based on the route lookup.
After bhash2 was introduced in the cited commit, we must call
inet_bhash2_update_saddr() to update the bhash2 entry as well.
If inet_bhash2_update_saddr() fails, we must release the refcount
for dst by ip_route_connect() or ip6_dst_lookup_flow().
While tcp_v4_connect() calls ip_rt_put() in the error path,
tcp_v6_connect() does not call dst_release().
Let's call dst_release() when inet_bhash2_update_saddr() fails
in tcp_v6_connect().
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260506070443.1699879-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d ("net: phy: broadcom: Add support code for reading PHY counters")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In smc_connect_work(), when the underlying TCP handshake fails, the error
code (rc) must be propagated to sk_err to ensure userspace can correctly
retrieve the error status via SO_ERROR. Currently, the code only handles
a restricted set of error codes (e.g., EPIPE, ECONNREFUSED). If other
errors occurs, such as EHOSTUNREACH, sk_err remains unset (zero).
This affects applications that rely on SO_ERROR to determine connect
outcome. For example, higher versions of Go's netpoller treats
SO_ERROR == 0 combined with a failed getpeername() as a spurious wakeup
and re-enters epoll_wait(). Under ET mode, no further edge will be
generated since the socket is already in a terminal state, causing the
connect to hang indefinitely or until a user-specified timeout, if one
is set.
Fixes: 50717a37db ("net/smc: nonblocking connect rework")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20260506014105.27093-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue.
Fixes: 314001f0bf ("af_unix: Add OOB support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jiexun Wang <wangjiexun2025@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP redirect into a veth device (via bpf_redirect()) calls
veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using
smp_processor_id() % peer->real_num_rx_queues
as the ring index. With an asymmetric veth pair where the peer has
fewer TX queues than RX queues, that index can exceed
peer->real_num_tx_queues.
veth_poll() then resolves peer_txq for the ring via:
peer_txq = peer_dev ? netdev_get_tx_queue(peer_dev, queue_idx) : NULL;
where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds
peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access
into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE
in netdev_get_tx_queue().
The normal ndo_start_xmit path is not affected: the stack clamps
skb->queue_mapping via netdev_cap_txqueue() before invoking
ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues.
Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is
within bounds, otherwise set it to NULL. The out-of-range rings are fed
exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit
(veth_xmit), so the peer txq was never stopped and there is nothing to
wake; NULL is the correct fallback.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/
Fixes: dc82a33297 ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Fixes
- Fix a NULL dereference in cros_ec_typec.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCafql3BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0WUYBANT74RbimiLqthwB3eAKwDI/NoY1n4L1
DFLw9p9aAZ44AQDobVTg3UirNAo7tzcXDXaAhNSMn02A8cOQfrSShLadAQ==
=WDBR
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when
gmac_get_queue_page() returns NULL for the second page of a multi-page
fragment, the driver logs an error and continues — but does not free the
partially assembled skb that was being assembled via napi_build_skb() /
napi_get_frags().
Free the in-progress partially assembled skb via napi_free_frags()
and increase the number of dropped frames appropriately
and assign the skb pointer NULL to make sure it is not lingering
around, matching the pattern already used elsewhere in the driver.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Andreas Haarmann-Thiemann <eitschman@nebelreich.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: misc. fixes for v7.1-rc3
Here are various fixes, mainly related to ADD_ADDRs:
- Patch 1: save ADD_ADDR for rtx with ID0 when needed. A fix for v6.1.
- Patch 2: remove unneeded exception for ID 0. A fix for v5.10.
- Patches 3-5: fix potential data-race and leaks during ADD_ADDR rtx. A
fix for v5.10.
- Patch 6: resched blocked ADD_ADDR rtx after a more appropriated
timeout, not after 15 seconds. A fix for v5.10.
- Patch 7: skip inactive subflows when when looking at the max RTO. A
fix for v6.18.
- Patch 8: avoid iterating over all subflows when there is no need to. A
fix for v6.18.
- Patch 9: skip closed subflows when looking at sending MP_PRIO. A fix
for v5.17.
- Patch 10: properly catch errors when using check_output() in the
selftests. A fix for v6.9.
- Patch 11: skip the 'unknown' flag test when 'ip mptcp' is used. A fix
for v6.10.
====================
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-0-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Fixes: 0cef6fcac2 ("selftests: mptcp: ip_mptcp option for more scripts")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
Fixes: 2d0c1d27ea ("selftests: mptcp: add mptcp_lib_check_output helper")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sending an MP_PRIO, closed subflows need to be skipped.
This fixes the case where the initial subflow got closed, re-opened
later, then an MP_PRIO is needed for the same local address.
Note that explicit MP_PRIO cannot be sent during the 3WHS, so it is fine
to use __mptcp_subflow_active().
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Fixes: b29fcfb54c ("mptcp: full disconnect implementation")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-9-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When looking at the maximum RTO amongst the subflows, inactive subflows
were taken into account: that includes stale ones, and the initial one
if it has been already been closed.
Unusable subflows are now simply skipped. Stale ones are used as an
alternative: if there are only stale ones, to take their maximum RTO and
avoid to eventually fallback to net.mptcp.add_addr_timeout, which is set
to 2 minutes by default.
Fixes: 30549eebc4 ("mptcp: make ADD_ADDR retransmission timeout adaptive")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-7-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR needs to be retransmitted and another one has already
been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and
need to be retransmitted later -- this additional retransmission will
need to wait.
In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15
seconds. This delay is unnecessary long: it should just be rescheduled
at the next opportunity, e.g. after the retransmission timeout.
Without this modification, some issues can be seen from time to time in
the selftests when multiple ADD_ADDRs are sent, and the host takes time
to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP
Join selftest, especially with a debug kernel config.
Note that on older kernels, 'timeout' is not available. It should be
enough to replace it by one second (HZ).
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-6-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(),
and released at the end.
If at that moment, it was the last reference being held, the sk would
not be freed. sock_put() should then be called instead of __sock_put().
But that's not enough: if it is the last reference, sock_put() will call
sk_free(), which will end up calling sk_stop_timer_sync() on the same
timer, and waiting indefinitely to finish. So it is needed to mark that
the timer is done at the end of the timer handler when it has not been
rescheduled, not to call sk_stop_timer_sync() on "itself".
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-5-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer().
It should then be released in all cases at the end.
Some (unlikely) checks were returning directly instead of calling
sock_put() to decrease the refcount. Jump to a new 'exit' label to call
__sock_put() (which will become sock_put() in the next commit) to fix
this potential leak.
While at it, drop the '!msk' check which cannot happen because it is
never reset, and explicitly mark the remaining one as "unlikely".
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-4-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This mptcp_pm_add_timer() helper is executed as a timer callback in
softirq context. To avoid any data races, the socket lock needs to be
held with bh_lock_sock().
If the socket is in use, retry again soon after, similar to what is done
with the keepalive timer.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-3-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADD_ADDR can be sent for the ID 0, which corresponds to the local
address and port linked to the initial subflow.
Indeed, this address could be removed, and re-added later on, e.g. what
is done in the "delete re-add signal" MPTCP Join selftests. So no reason
to ignore it.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-2-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding the ADD_ADDR to the list, the address including the IP, port
and ID are copied. On the other hand, when the endpoint corresponds to
the one from the initial subflow, the ID is set to 0, as specified by
the MPTCP protocol.
The issue is that the ID was reset after having copied the ID in the
ADD_ADDR entry. So the retransmission was done, but using a different ID
than the initial one.
Fixes: 8b8ed1b429 ("mptcp: pm: reuse ID 0 after delete and re-add")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-1-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_child_process( .. child ...) currently calls sock_put(child).
Unfortunately @child (named @nsk in callers) can be used after
this point to send a RST packet.
To fix this UAF, I remove the sock_put() from tcp_child_process()
and let the callers handle this after it is safe.
Remove @rsk variable in tcp_v4_do_rcv() and change tcp_v6_do_rcv()
so that both functions look the same.
Fixes: cfb6eeb4c8 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260505153927.3435532-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing a lockless lookup over the inet_peer rbtree,
if a matching node is found, inet_getpeer() returns it immediately
without validating the seqlock sequence.
This missing check introduces a race condition:
Trigger Path: When a host receives an incoming fragmented IPv4 packet,
ip4_frag_init() (in net/ipv4/ip_fragment.c) calls inet_getpeer_v4()
to track the peer.
The Race: If the packet is from a new source IP, CPU A acquires the
write_seqlock, allocates a new inet_peer node (p), sets its IP address
(daddr), and links it to the rbtree (rb_link_node).
Uninitialized Access: Due to the lack of memory barriers between
rb_link_node and the initialization of the rest of the struct
(like refcount_set(&p->refcnt, 1)), CPU A can make the node visible
to readers before its refcnt is initialized.
This is especially true on weakly-ordered architectures like ARM64
where the CPU can reorder the memory stores.
Lockless Reader: Concurrently, CPU B processes a second fragmented packet
from the same source IP. CPU B does a lockless lookup, finds the newly
inserted node, and returns it immediately.
Use-After-Free (UAF): CPU B reads p->refcnt as uninitialized garbage
(left over from previous kmalloc-128/192 allocations).
If the garbage is > 0, refcount_inc_not_zero(&p->refcnt) succeeds.
CPU A then executes refcount_set(&p->refcnt, 1), overwriting CPU B's increment.
When CPU B finishes with the fragment queue, it calls inet_putpeer(),
which drops the refcount to 0 and frees the node via RCU.
The node is now freed but remains linked in the rbtree,
resulting in a Use-After-Free in the rbtree.
Fixes: b145425f26 ("inetpeer: remove AVL implementation in favor of RB tree")
Reported-by: Damiano Melotti <melotti@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260505133233.3039575-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_get_child_by_name() takes a reference. The rtsn_reset() and
rtsn_change_mode() failure paths jump to out_free_bus and leak
mdio_node.
Add out_put_node to drop it before falling through.
Fixes: b0d3969d2b ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20260505123236.406000-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Zahka says:
====================
netdevsim: psp: fix init and uninit bugs
This series has three fixes. The first is a straightforward NULL
pointer dereference that is reachable by creating and destroying some
vfs on a kernel with INET_PSP enabled.
The last two patches deal with nsim_psp_rereg_write(), which is a
debugfs handler that reregisters netdevsim's psp_dev without
aquiescing and disabling tx/rx processing. This was added to enable
some tests in psp.py where a psp device is unregistered while it still
referenced by tcp socket state.
There are two issues with this code:
1. Calls to nsim_psp_uninit() are not properly serialized
2. netdevsim's psp_dev refcount can be released while nsim_do_psp() is
reading from it.
====================
Link: https://patch.msgid.link/20260505-psd-rcu-v1-0-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two issues with the way psp_dev is used in nsim_do_psp():
1. There is no check for IS_ERR() on the peers psp_dev, before
dereferencing.
2. The refcount on this psp_dev can be dropped by
nsim_psp_rereg_write()
To fix this, we can make netdevsim's reference to its psp_dev an rcu
reference, and then nsim_do_psp() can read the fields it needs from an
rcu critical section.
Fixes: f857478d62 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-3-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The debugfs write handler, nsim_psp_rereg_write(), can race against
nsim_destroy() and against itself, causing nsim_psp_uninit() to run
more than once concurrently. Two complementary changes serialize all
callers:
1. Delete the psp_rereg debugfs file from nsim_psp_uninit() before
doing the actual teardown. debugfs_remove() drains any in-flight
writers and prevents new ones from starting.
2. Add a mutex around the body of nsim_psp_rereg_write() so that two
concurrent userspace writers cannot both enter the teardown path
at once.
The teardown work itself is moved into a new __nsim_psp_uninit() that
the rereg handler calls under the mutex, while the public
nsim_psp_uninit() wraps it with the debugfs_remove()/mutex_destroy()
pair so nsim_destroy() doesn't have to know about the psp internals.
Fixes: f857478d62 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-2-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VFs go through nsim_init_netdevsim_vf() which never calls
nsim_psp_init(), so ns->psp.dev stays NULL. nsim_psp_uninit() guards
with !IS_ERR(ns->psp.dev), so destroying a VF reaches
psp_dev_unregister(NULL) and dereferences NULL on the first
mutex_lock(&psd->lock):
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:mutex_lock+0x1c/0x30
Call Trace:
psp_dev_unregister+0x2a/0x1a0
nsim_psp_uninit+0x1f/0x40 [netdevsim]
nsim_destroy+0x61/0x1e0 [netdevsim]
__nsim_dev_port_del+0x47/0x90 [netdevsim]
nsim_drv_configure_vfs+0xc9/0x130 [netdevsim]
nsim_bus_dev_numvfs_store+0x79/0xb0 [netdevsim]
Gate nsim_psp_uninit() on nsim_dev_port_is_pf(), matching the pattern
already used for nsim_exit_netdevsim() and the bpf/ipsec/macsec/queue
teardowns.
Reproducer:
modprobe netdevsim
echo "10 1" > /sys/bus/netdevsim/new_device
echo 1 > /sys/bus/netdevsim/devices/netdevsim10/sriov_numvfs
devlink dev eswitch set netdevsim/netdevsim10 mode switchdev
echo 0 > /sys/bus/netdevsim/devices/netdevsim10/sriov_numvfs
Fixes: f857478d62 ("netdevsim: a basic test PSP implementation")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260505-psd-rcu-v1-1-a8f69ec1ab96@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=WKO1
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-05
1. Fix an IPv6 encapsulation error path that leaked route references
when UDPv6 ESP decapsulation resolved to an error route.
From Yilin Zhu.
2. Fix AH with ESN on async crypto paths by accounting for the extra
high-order sequence number when reconstructing the temporary
authentication layout in the completion callbacks.
From Michael Bomarito.
3. Fix XFRM output so it does not overwrite already-correct inner header
pointers when a tunnel layer such as VXLAN has already saved them.
The fix comes with new selftests. From Cosmin Ratiu.
4. Add the missing native payload size entry for XFRM_MSG_MAPPING in the
compat translation path. From Ruijie Li.
5. Harden __xfrm_state_delete() against repeated or inconsistent unhashing
of state list nodes by keying the removal on actual list membership and
using delete-and-init helpers. From Michal Kosiorek.
6. Prevent ESP from decrypting shared splice-backed skb fragments in place
by marking UDP splice frags as shared and forcing copy-on-write in ESP
input when needed. From Kuan-Ting Chen.
* tag 'ipsec-2026-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: esp: avoid in-place decrypt on shared skb frags
xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete
xfrm: provide message size for XFRM_MSG_MAPPING
xfrm: Don't clobber inner headers when already set
tools/selftests: Add a VXLAN+IPsec traffic test
tools/selftests: Use a sensible timeout value for iperf3 client
xfrm: ah: account for ESN high bits in async callbacks
ipv6: xfrm6: release dst on error in xfrm6_rcv_encap()
====================
Link: https://patch.msgid.link/20260505132326.1362733-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called with BH
disabled
* reduce ping count in selftest to ensure it completes within
timeout
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQKU153ubb5unbkl6Gx/ZpNW1HNdwUCafkekRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQsf2aTVtRzXdZAAEA2yDBkZdIiALO7V5ul5Ao
Y2/jFxysR5fyCMiOdxTOruwBAJaX9KExSE2QucHKOBFLmrjIIqwI5Br6whljdZKt
n1YE
=UhhZ
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Includes changes:
* ensure MAC header offset is reset before delivering packet
* ensure gro_cells_receive() and dstats_dev_add() are called
with BH disabled
* reduce ping count in selftest to ensure it completes within
timeout
* tag 'ovpn-net-20260504' of https://github.com/OpenVPN/ovpn-net-next:
selftests: ovpn: reduce ping count in test.sh
ovpn: ensure packet delivery happens with BH disabled
ovpn: reset MAC header before passing skb up
====================
Link: https://patch.msgid.link/20260504230305.2681646-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Bommarito