Add an entry for the iris video decoder accelerator driver.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Initialize the platform data and enable video driver probe of SM8250
SoC.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Based on the design of the state machine, add checks whether the
transition from one sub-state to another is allowed.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement power scaling including a specific vpu2 and vpu3 calculation
for clock and bus bandwidth, which depends on the hardware
configuration, codec format, resolution and frame rate.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Based on the hardware capabilities, add a check during start_streaming
and queue_setup, whether the video session is supported by the hardware.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
handle the V4L2_DEC_CMD_STOP by initiating a drain sequence on the
firmware. Process and decode all OUTPUT buffers, that are queued by the
client, before the VIDIOC_DECODER_CMD() was issued and mark the last
buffer with the V4L2_BUF_FLAG_LAST flag. The decoder is stopped, after
processing the last buffer.
Resume the decoder when one of these operations are issued by the client:
- V4L2_DEC_CMD_START
- pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE queue
- pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the OUTPUT queue
Add the handling to resume decoding when client issues
V4L2_DEC_CMD_START to resume decoding after a source change is detected.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The decoder is stopped after it completes the dynamic resolution change
sequence. Handle VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE
queue to resume the decoding process.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Handle the response sent by the firmware, when a source change is
detected. Read the subscribed parameter to get the changed values. Raise
the source change event to the client and update the instance sub-state.
Mark the last buffer from before the source change with the
V4L2_BUF_FLAG_LAST flag and return to the client.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the vb2 ops for the buf queue. These are the different buffer
attributes:
BUF_ATTR_DEFERRED - buffer queued by the client but not submitted to
firmware.
BUF_ATTR_PENDING_RELEASE - buffers requested to be released from
the firmware.
BUF_ATTR_QUEUED - buffers submitted to the firmware.
BUF_ATTR_DEQUEUED - buffers received from the firmware.
BUF_ATTR_BUFFER_DONE - buffers sent back to vb2.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the functions for creating, queueing, releasing and destroying
the buffers for internal usage.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For hfi_gen2, subscribe different bitstream parameters on to firmware,
to get notified of a change in any of the subscribed parameters.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
During the stream on operation, set some mandatory properties on the
firmware to start a session. Set all v4l2 properties, which are set by
the client, on to firmware, which is prepared with the dependency graph.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
During the stream on operation, send HFI_CMD_START on the capture and
output planes to start processing on the respective planes.
During the stream off operation, send HFI_CMD_STOP to the firmware,
which is a synchronous command. After the response is received by the
firmware, the session is closed on the firmware.
Introduce different states for the instance and state transitions.
IRIS_INST_INIT - video instance is opened.
IRIS_INST_INPUT_STREAMING - stream on is completed on output plane.
IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane.
IRIS_INST_STREAMING - stream on is completed on both output and capture
planes.
IRIS_INST_DEINIT - video instance is closed.
IRIS_INST_ERROR - error state.
|
v
-------------
+---------| INIT |--------- +
| ------------- |
| ^ ^ |
| / \ |
| / \ |
| v v |
| ----------- ----------- |
| | INPUT OUTPUT | |
|---| STREAMING STREAMING |---|
| ----------- ----------- |
| ^ ^ |
| \ / |
| \ / |
| v v |
| ------------- |
|--------| STREAMING |-----------|
| ------------- |
| | |
| | |
| v |
| ----------- |
+-------->| DEINIT |<----------+
| ----------- |
| | |
| | |
| v |
| ---------- |
+-------->| ERROR |<-----------+
----------.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the query_cap ioctl with the necessary hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Initialize the control handler by reading the platform specific firmware
capabilities. Capabilities are features, which are supported by a
specific platform (SOC). Each capability is defined with a min, max,
range and default value and a corresponding HFI. Implement s_ctrl and
g_volatile_ctrl ctrl ops.
Co-developed-by: Vedang Nagar <quic_vnagar@quicinc.com>
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the subscribe_event and unsubscribe_event iocts with the
necessary hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the enum_fmt and enum_framesizes ioctls with the necessary
hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the g_selection ioctl op in the driver with the necessary
hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the s_fmt, g_fmt and try_fmt ioctl ops with the necessary
hooks.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the
driver with necessary hooks.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement runtime power management for iris, including a platform
specific power on/off sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Host firmware interface (HFI) is a well defined set of interfaces
for the communication between the host driver and the firmware. The
commands and responses are exchanged in form of packets. One or multiple
packets are grouped under the packet header. Each packet has a packet
type which describes the specific HFI and the payload, which holds the
corresponding value for that HFI.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Set the memory region on the firmware and implement the boot sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Load/unload the firmware into/from memory via the MDT loader.
The firmware is loaded as part of core initialization and unloaded as
part of core de-initialization.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce a core state management for iris driver with the necessary
queues needed for the host firmware communication.
There are 3 types of queues:
Command queue - driver to write any command to firmware.
Message queue - firmware to send any response to the driver.
Debug queue - for the firmware to write debug messages.
Initialize and configure the shared queues during probe.
Different states for core:
IRIS_CORE_DEINIT - default state.
IRIS_CORE_INIT - core state with core initialized. FW loaded and HW
brought out of reset, shared queues established
between host driver and firmware.
IRIS_CORE_ERROR - error state.
-----------
|
V
-----------
| DEINIT |
-----------
^
/ \
/ \
/ \
/ \
v v
----------- ----------.
| INIT |-->| ERROR |
----------- ----------.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Implement open, close and poll ops.
Open:
Configure the vb2 queue and v4l2 file handler. Allocate a video instance
and add the instance to core instance list.
Close:
Free the instance and remove it from core instance list.
Poll:
Wait for an event on vb2 src and vb2 dst queues.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In preparation for adding H264 decode functionality, add the probe and
remove functions and platform data to initialize iris resources, which
are clocks, interconnects, power domains, reset clocks, and clock
frequencies used for the iris hardware.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce support for Qualcomm new video acceleration hardware i.e.
iris, used for video stream decoding and encoding on QCOM SM8550 SoC.
Cc: devicetree@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The CSID in sm8550 is version 780, it has new register offset
and new functionality. The buf done irq, register update and
reset are moved to CSID 780.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a PHY configuration sequence and PHY resource for the sm8550 which
uses a Qualcomm Gen 2 version 2.1.2 CSI-2 PHY.
The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add CAMSS_8550 enum, sm8550 compatible and sm8550 camss drvier private
data, the private data just include some basic information now, later
changes will enumerate with csiphy, csid and vfe resources.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add bindings for qcom,sm8550-camss in order to support the camera
subsystem for sm8550.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver
shouldn't be registered. Checking the supported TPG modes to indicate
if the TPG hardware exists or not and only registering v4l2 ctrl for
CSID only when the TPG hardware is present.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a default case in vfe_src_pad_code to get rid of a compile
warning if a new hw enum is added.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The RUP registers and buf done irq are moved from the IFE to CSID register
block on recent CAMSS implementations. Add callbacks structure to wrapper
the location change with minimum logic disruption.
Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some v4l2 buffer related logic functions can be moved to vfe core as
common code, then the vfe driver of different hw version can reuse them,
this also can avoid adding duplicate code for new version supporting.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The get hw version and src pad code functions can be common code in csid
core file, then the csid driver of different hw version can reuse them,
rather than adding duplicate code in csid driver for each version.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
New versions of the CSIPHY locate the control registers at offset 0x1000
not offset 0x800.
Provide a variable to base an offset from for the purposes of redirecting
the base offset for the new PHY regs layout.
The existing setup bases from 0x800, the new from 0x1000 with some of the
'EXT' registers dropped but the lower-order lane config regs at offset 0x00
and up the same as before.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
A .data field in the csiphy device structure allows us to extend out the
register layout of the three phase capable CSIPHY layer.
Move the existing lane configuration structure to an encapsulating
structure -> struct csiphy_device_regs which is derived from the .data
field populated at PHY init time, as opposed to calculated at lane
configuration.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add a nop init callback to CSIPHY devices, this callback is used to add
some HW register offset and register configuration for specific platform,
then different platform can reuse the same CSIPHY driver. Later changes
will enumerate with enabling code.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The existing structure captures the configuration of CSIPHY lane registers.
Rename to struct csiphy_lane_regs to reflect.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Adding a new CSIPHY init sequence using downstream as a reference prompted
me to look at why we are splitting up the init sequence into chunks.
Right now we declare CSI PHY init sequences as an array of five equally
sized writes with a hard-coded control loop to iterate through each of the
five indexes. One bug in this model is that if you don't have an even
number of writes, you can't init the PHY as you wish.
In downstream the original code has something of the character
phy_init_seq[MAX_LANES][MAX_PARAMS] which in upstream we have translated
into phy_init_seq[5][SOME_NUMBER_OF_EQUAL_WRITES];
What the code does is take a pointer to the first index of the
r = &phy_init_seq[0][0]; and then literally does write(r, value); r++;
The controlling loop that hard-codes '5' in-lieu of MAX_LANES does no
special sleep, fabric-coherence sync or even a printk() to justify its
existence. Our compilers are optimising all of this away anyway so lets
drop.
Reduce the array declaration down to one flat aggregate init and let the
code just step through. As a happy side-effect we can then also handle
odd-number writes as the number of elements in the init sequence will no
longer have to be evenly divisible.
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update clock names to make them consistent with existing platform i.e
sc8280xp. Rename gcc_cam_hf_axi to gcc_axi_hf and add gcc_axi_sf.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update clock names to make them consistent with existing platform i.e
qcom,sc8280xp-camss.yaml. Rename gcc_cam_hf_axi to gcc_axi_hf and add
gcc_axi_sf.
gcc_camera_ahb is always on and we don't need to enable it explicitly.
gcc_axi_sf is added to avoid unexpected hardware behaviour.
This change will not break ABI because the ABI hasn't been cemented yet as
the dtsi changes are not merged yet and there are no users for this driver
as of now.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
-----BEGIN PGP SIGNATURE-----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=mWV6
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
- sh: boards: Use imply to enable hardware with complex dependencies
- sh: Migrate to the generic rule for built-in DTB
- sh: irq: Use seq_put_decimal_ull_width() for decimal values
-----BEGIN PGP SIGNATURE-----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=G6GL
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
Dikshita Agarwal