On the XO-1.75, this node represents a bus interface that operates in slave
mode and thus is only able to accommodate a single subnode; no address
cells are necessary.
The Documentation/devicetree/bindings/spi/spi-controller.yaml binding
prefers that we drop the property instead of setting it to zero.
This fixes a DT validation error:
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000:
{ ... } is valid under each of {'required': ['spi-slave']},
{'required': ['#address-cells']}
We also need to drop #size-cells:
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000:
'#address-cells' is a dependency of '#size-cells'
Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0:
'camera_i2c' does not match '^i2c(@.*)?'
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property
mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property
The "gpios" property actually was documented as deprecated, but got dropped
in commit 0175ce4a58 ("dt-bindings: i2c: Convert i2c-gpio binding to
json-schema"). It's probably best kept forgotten though.
Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
MCU part:
-Enable stmpe811 on stm32f429
-Enable l3gd20-gyro on stm32f429
-Enable panel-ilitek-9341 on stm32f429
-Fixes for yaml validation (leds, nodes names,
remove useless bindings ...)
-Add stm32xxx compatibles for syscon nodes
MPU part:
-Add support for usb role switch to dwc2
-Add stm32xxx compatibles for syscon nodes
-Update uart4 pin configuration for low power mode
used by dkx and ed1 ST boards
-Fix uart nodes ordering and uart7_pins_a comments
-Add the support of uart instances available on STM32MP157 boards:
- usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2
- uart7 on stm32mp157a-dk1 and stm32mp157c-dk2
- usart2 on stm32mp157c-dk2
-Configure I2C5 on stm32mp15 DK boards
-----BEGIN PGP SIGNATURE-----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=ga5j
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.9, round 1
Highlights:
----------
MCU part:
-Enable stmpe811 on stm32f429
-Enable l3gd20-gyro on stm32f429
-Enable panel-ilitek-9341 on stm32f429
-Fixes for yaml validation (leds, nodes names,
remove useless bindings ...)
-Add stm32xxx compatibles for syscon nodes
MPU part:
-Add support for usb role switch to dwc2
-Add stm32xxx compatibles for syscon nodes
-Update uart4 pin configuration for low power mode
used by dkx and ed1 ST boards
-Fix uart nodes ordering and uart7_pins_a comments
-Add the support of uart instances available on STM32MP157 boards:
- usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2
- uart7 on stm32mp157a-dk1 and stm32mp157c-dk2
- usart2 on stm32mp157c-dk2
-Configure I2C5 on stm32mp15 DK boards
* tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits)
ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx
ARM: dts: stm32: Add compatibles for syscon for stm32mp151
ARM: dts: stm32: Add compatibles for syscon for stm32h743
ARM: dts: stm32: Add compatibles for syscon for stm32f746
ARM: dts: stm32: Add compatibles for syscon for stm32f426
dt-bindings: arm: stm32: Add compatibles for syscon nodes
ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl
ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx
ARM: dts: stm32: add usart2 node to stm32mp157c-dk2
ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards
ARM: dts: stm32: add usart3 node to stm32mp157c-ev1
ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards
ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl
ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl
ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl
ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl
ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx
ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1
ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157
dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC
...
Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAl8XLRMQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1+74EACDnknpO6m4o9nIqjaUaUW/JU1nk0/IVDBe
ShFz3eBVd0l203ObwTa2MCBLKY18VBSeKzOF/9UTmkC/lJpz7chV9THyY7B18Som
rtcI4QLNiZnBGmyuiHL28NR7Fzwig3Kj1rI+3PZtKx2SFS5H3eOEdsfdl/vTYhK3
B48Uy/0OO/e1Xq2V3Qzv/FNniLuYYswoaeUObvdFsXochBjT8ytLBZhrAGxKGEy4
d64DJKd7qC8D34RHJbRNaRdurk+QjKj7t/xyWjnv2uJk+QKU31fEOKqkxvU0hfBG
DxGKaItLS+iIrhO0vwBtvVbomUroTRPcsDhINuv8IYi7XfDtfAHqaeDKlxkdzwDr
ikx9BAVSr7XsZFkhTDxe/MosfRqZaphwoG+jusiTRHz0DgZGFEy8fiiBh3ru8oNV
br9QeJGXuyBL3Mj2M3PPjhCJ0tqEWOZDi0Ec2FPy1wlUsjHVaIiZGjMs93TVpOxl
c6+8XKyv2EnQQZeB76Lw8jIpgpusDHWjMHENW+kLAB1OFp7lSYsHOnUofbyFhwUb
iCKddqayawF57l5Ez78CjyW6DCBsChod/TE0TpPdVXf+4zq8EzQXDE/k4FNm0M/b
sqivk2lEh8u/2dun5Zo1E84oyytT86ffiIeML0U56cE3CeqQ+q8K9xMTHJN6xYlF
59fjM0+hHw==
=1MC3
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.9
1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.
* tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7
arm64: dts: exynos: Add unit address to soc node on Exynos5433
arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
arm64: dts: exynos: Keep LDO12 always-on on Espresso
arm64: dts: exynos: Fix silent hang after boot on Espresso
arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible
arm64: dts: exynos: Describe PWM interrupts on Exynos7
arm64: dts: exynos: Add UFS node to Exynos7
Link: https://lore.kernel.org/r/20200721180900.13844-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Bluetooth on Artik5 (Exynos3250).
2. Enable accelerometer on Aries boards (Samsung Galaxy S family,
S5Pv210); multiple fixes.
3. Fix highest frequencies on Exynos5800.
4. Fix rare USB instability on Odroid XU3 family (Exynos5422).
5. Minor DTS fixes and adjustments with dtschema.
-----BEGIN PGP SIGNATURE-----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=k3pO
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.9
1. Enable Bluetooth on Artik5 (Exynos3250).
2. Enable accelerometer on Aries boards (Samsung Galaxy S family,
S5Pv210); multiple fixes.
3. Fix highest frequencies on Exynos5800.
4. Fix rare USB instability on Odroid XU3 family (Exynos5422).
5. Minor DTS fixes and adjustments with dtschema.
* tag 'samsung-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Replace HTTP links with HTTPS ones
ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family
ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420
ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale
ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen
ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats
ARM: dts: exynos: Align L2 cache-controller nodename with dtschema
ARM: dts: s5pv210: Correct BCM4329 bluetooth node
ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries
ARM: dts: s5pv210: Add support for GP2A light sensor on Aries
ARM: dts: s5pv210: Correct fuelgauge definition on Aries
ARM: dts: s5pv210: Add interrupt-controller property to gph3
ARM: dts: exynos: Enable Bluetooth support for Artik5 board
ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data
Link: https://lore.kernel.org/r/20200721180900.13844-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik
RB3011 using the same platform.
-----BEGIN PGP SIGNATURE-----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=wWXD
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for v5.9
Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik
RB3011 using the same platform.
* tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add qfprom definition to ipq806x
ARM: dts: qcom: Add MikroTik RB3011
ARM: dts: qcom: add ethernet definitions to ipq8064
Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.
SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.
SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.
SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support
SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.
IPQ8074 gains USB and SDHCI support.
MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.
MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.
The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
-----BEGIN PGP SIGNATURE-----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=i4yf
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.9
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.
SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.
SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.
SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support
SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.
IPQ8074 gains USB and SDHCI support.
MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.
MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.
The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
* tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (66 commits)
arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains
arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi
arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer
arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c
arm64: dts: qcom: msm8916: Simplify pinctrl configuration
arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file
arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon
arm64: dts: qcom: sc7180: Add missing properties for Wifi node
arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
arm64: dts: sdm845: add Inline Crypto Engine registers and clock
arm64: dts: sc7180: Add sdhc opps and power-domains
arm64: dts: sdm845: Add sdhc opps and power-domains
arm64: dts: sc7180: Add OPP table for all qup devices
arm64: dts: sdm845: Add OPP table for all qup devices
arm64: dts: sc7180: Add qspi opps and power-domains
arm64: dts: sdm845: Add qspi opps and power-domains
arm64: dts: qcom: sdm845: Add cpu OPP tables
arm64: dts: qcom: sc7180: Drop the unused non-MSA SID
...
Link: https://lore.kernel.org/r/20200721044934.3430084-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GARv
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.9
- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960
* tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding
dts: hi3660: Add support for basic usb gadget on Hikey960
arm64: dts: hisilicon: Align UART nodename with dtschema
arm64: dts: hisilicon: Use phandles for overriding nodes in hi6220
Link: https://lore.kernel.org/r/5F165E8E.3030503@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlZAAKCRDj7w1vZxhR
xft/AQCaR2CkyOVyK32yPUX0ZF2nS+LYzalJIUpOuLhy37GQVwEA+vlQTa7fKdtW
4IX58peBkRD8FwTszrwR/tImDPd8Rwg=
=z8pA
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
* tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs
arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones
arm64: dts: allwinner: h5: Add clock to CPU cores
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores
ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores
arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V
arm64: dts: allwinner: Add support for PinePhone revision 1.2
dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings
arm64: dts: sun50i-a64-pinephone: Add touchscreen support
arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
ARM: dts: orange-pi-zero-plus2: add leds configuration
ARM: dts: orange-pi-zero-plus2: enable USB OTG port
Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
just a single patch fixing up the node names for schema.
-----BEGIN PGP SIGNATURE-----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=xBG2
-----END PGP SIGNATURE-----
Merge tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt
Versatile DTS changes for the v5.9 kernel cycle, essentially
just a single patch fixing up the node names for schema.
* tag 'versatile-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: arm-realview: Align L2 cache-controller nodename with dtschema
Link: https://lore.kernel.org/r/CACRpkdbkM9ZmuG2FnBmO7upcJfnqq2oSLDCFDXC5b3K+dtps9Q@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VVUkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4J8wf+JD5crdfw+/458BsgX30HBfgd++CG
RRJxeqx3CkHsPyMAza9wKWPZDASIDQaWIA3CKf2niQyR7jKxAd9JdMw+hBBMoG+I
4+uMRictK98rODP4bcGlLtUjdoncjCuAoa58tKSAiZ+SAEjlb5UHCXpbKtrPtQuY
r4v+ODV82U1gIdDaZeOS1L40iQHwGO5/Aq+Ua8UvraoMTgHMW6Il86XlbE3Gk1Ql
YrqAteG9SJm5cFRbrmmKisA3rLZoYqYYZ1Tb66kDKBrmTTzZTBmHE+5SE7DJwFh5
c74BHkARhw0lXhpQzcEK9jnR88+ZUqL+qbteVmotB4+54WbFrJEJ4/BejA==
=sjzz
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.9:
- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.
* tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
arm64: dts: lx2160a-rdb: fix shunt-resistor value
arm64: dts: ls1028a-qds: Add DSPI flash nodes
arm64: dts: lx2160a: Increase configuration space size
arm64: dts: zii-ultra: update MDIO speed and preamble
arm64: dts: ls1043a: update USB nodes status to match board config
arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board
arm64: dts: imx8mp: add ddr pmu device node
arm64: dts: ls1043a: add more thermal zone support
arm64: dts: ls1046a: add more thermal zone support
arm64: dts: layerscape: add ftm_alarm0 node
arm64: dts: ls1028a: Add ftm_alarm0 DT node
arm64: dts: lx2160a: add ftm_alarm0 DT node
arm64: dts: lx2160a: add DT node for all DSPI controller
arm64: dts: lx2160a: add dspi controller DT nodes
arm64: dts: imx8mp: Add fallback compatible to ocotp node
arm64: dts: imx8qxp: Add ethernet alias
arm64: dts: imx8qxp: add i2c aliases
arm64: dts: imx8qxp: add alias for lsio MU
arm64: dts: imx8m: add mu node
arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs
...
Link: https://lore.kernel.org/r/20200720085536.24138-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC.
- Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings.
- Make tempmon node as child of anatop node according to hardware
architecture.
- The vf610-zii device update: configure fiber port to 1000BaseX, add
switch watchdog, MDIO speed and preamble.
- A series from Fabio Estevam to update imx6qdl-sabresd and
imx6q-tbs2910 for using MDIO node and reset-assert-us.
- Align L2 cache-controller device node name with .yaml schema.
- Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board.
- A series of patches from Shengjiu Wang to enable various audio
support on i.MX6 devices.
- Add Gateworks System Controller support for imx6qdl-gw devices.
- Change default #pwm-cells setting to <3> in the SoC dtsi files.
- Other small random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VVgcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7azwf+KzAukegArKtAmsbAnYNKYztXXifW
6Hc3+hv2mfUtsGfHPSUJJ5MhEW52xAbcXnYETUkmoWe1W1zIxrNNWvBUm4nPF5os
0cO8tjk4cE4CYDnsl8sBSqT55sd3ke61I+j9q0NAQNyX9OlmZ3kfm8yw0yIsxTKp
/FzoLmOeRzhVKHdZczuJ9Ts4kFyf3XtQrrN1UTbu715KdIbbsrJtXQ74ADBCnjfX
8RUm3Y5XIaPcF4z2U8reMsbHCF120ENIfGwFRNo/Odx+1OVo1IrDB1+f/SP9ZP0T
6+iKvfSS4RavzB1tvLdJ2/911t7qtqsneU33kwQKL0wrFZsT4ih42uBfpw==
=1hHY
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree update for 5.9:
- New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC.
- Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings.
- Make tempmon node as child of anatop node according to hardware
architecture.
- The vf610-zii device update: configure fiber port to 1000BaseX, add
switch watchdog, MDIO speed and preamble.
- A series from Fabio Estevam to update imx6qdl-sabresd and
imx6q-tbs2910 for using MDIO node and reset-assert-us.
- Align L2 cache-controller device node name with .yaml schema.
- Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board.
- A series of patches from Shengjiu Wang to enable various audio
support on i.MX6 devices.
- Add Gateworks System Controller support for imx6qdl-gw devices.
- Change default #pwm-cells setting to <3> in the SoC dtsi files.
- Other small random changes.
* tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog
ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties
ARM: dts: imx6q-tbs2910: Pass reset-assert-us
ARM: dts: imx6q-tbs2910: Add an mdio node
ARM: dts: imx6qdl-sabresd: Pass reset-assert-us
ARM: dts: imx6qdl-sabresd: Add an mdio node
ARM: dts: imx6qdl-gw: add Gateworks System Controller support
ARM: dts: imx6ull: add MYiR MYS-6ULX SBC
ARM: dts: vf610-zii-spb4: Add node for switch watchdog
ARM: dts: colibri-imx6: remove pinctrl-names orphan
ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files
ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX
ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX
ARM: dts: ZII: update MDIO speed and preamble
ARM: dts: vfxxx: Add node for CAAM
ARM: dts: imx6qp-sabresd: enable sata
ARM: dts: imx6qp-sabreauto: enable sata
ARM: dts: add Protonic RVT board
ARM: dts: add Protonic VT7 board
ARM: dts: add Protonic WD2 board
...
Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that USB OTG driver supports usb role switch by overriding PHY input
signals (A-Valid, B-Valid and Vbus-Valid), enable it on stm32mp15xx-dkx.
dr_mode needn't to be forced to Peripheral anymore, it is set to OTG in
SoC device tree.
USB role (USB_ROLE_NONE, USB_ROLE_DEVICE, USB_ROLE_HOST) will be provided
by STUSB1600 Type-C controller driver.
This patch depends on "Add STUSB160x Type-C port controller support"
series, which is under review.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Since commit ad440432d1 ("dt-bindings: mfd: Ensure 'syscon' has a more specific compatible")
it is required to provide at least 2 compatibles string for syscon node.
This patch document the missing compatibles for stm32 SoCs.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins
are not in BANK Z.
Fixes: 498a701498 ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Configure I2C5 on stm32mp15 DK boards. It's available and can be used on:
- Arduino connector
- GPIO expansion connector
Keep it disabled by default, so the pins are kept in their initial state to
lower power consumption. This way they can also be used as GPIO.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adds the usart2 node to stm32mp157c-dk2 board. usart2 pins are connected
to Bluetooth component. usart2 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adds uart7 node to stm32mp15xx-dkx and uart7 alias to stm32mp157a-dk1 and
stm32mp157c-dk2 boards. uart7 pins are connected to Arduino connector.
uart7 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adds the usart3 node to stm32mp157c-ev1 board. usart3 pins are connected to
GPIO Expansion connector. usart3 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adds usart3 node to stm32mp15xx-dkx and usart3 alias to stm32mp157a-dk1
and stm32mp157c-dk2 boards. usart3 pins are connected to GPIO Expansion
connector. usart3 is disabled by default.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Adds usart2_pins_c, usart3_pins_b, usart3_pins_c and uart7_pins_c pins
configurations in stm32mp15-pinctrl.
- usart2_pins_c pins are connected to Bluetooth chip on dk2 board.
- usart3_pins_b pins are connected to GPIO expansion connector on evx board.
- usart3_pins_c pins are connected to GPIO expansion connector on dkx board.
- uart7_pins_c pins are connected to Arduino Uno connector on dkx board.
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Use tabs where possible and remove multiple blanks lines.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Bananapi M2 Plus H5 v1.2 can work with the standard H5 OPPs.
Tie them in to enable CPU frequency scaling.
The original Bananapi M2 Plus H5 is left out for now, as adding
the fixed regulator along with the enable pin seemed to cause some
glitching in Linux.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-9-wens@kernel.org
The Libre Computer ALL-H3-CC H5 variant can work with the standard H5
OPPs. Tie them in to enable CPU frequency scaling.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-8-wens@kernel.org
Add an OPP (Operating Performance Points) table for the CPU cores for
boards to include to DVFS (Dynamic Voltage & Frequency Scaling) on the
H5. The table originates from Armbian, but the maximum voltage is raised
slightly to account for boards using slightly higher voltages.
The table and tie in to the CPU cores are put in a separate dtsi file
that board files can include to opt in. Or they can define their own
tables if the standard one does not fit.
This has been tested on the Libre Computer ALL-H3-CC-H5 and the Bananapi
M2+ v1.2 H5, both with adequate cooling. The former has a fixed 1.2V
regulator, while the latter has a GPIO controlled regulator switchable
between 1.1V and 1.3V.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-7-wens@kernel.org
This enables passive cooling by down-regulating CPU voltage and frequency.
The trip points were copied from the H3.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-6-wens@kernel.org
The ARM CPU cores are fed by the CPU clock from the CCU. Add a
reference to the clock for each CPU core, along with the clock
transition latency.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-5-wens@kernel.org
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
sharing of the supply.
Assign the same regulator supply to the remaining CPU cores to address
this.
Fixes: 6eeb4180d4 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-3-wens@kernel.org
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
sharing of the supply.
Assign the same regulator supply to the remaining CPU cores to address
this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-2-wens@kernel.org
Commit 1019fe2c72 ("ARM: dts: exynos: Adjust bus related OPPs to the
values correct for Exynos5422 Odroids") changed the parameters of the
OPPs for the FSYS bus. Besides the frequency adjustments, it also removed
the 'shared-opp' property from the OPP table used for FSYS_APB and FSYS
busses.
This revealed that in fact the FSYS bus frequency scaling never worked.
When one OPP table is marked as 'opp-shared', only the first bus which
selects the OPP sets the rate of its clock. Then OPP core assumes that
the other busses have been changed to that OPP and no change to their
clock rates are needed. Thus when FSYS_APB bus, which was registered
first, set the rate for its clock, the OPP core did not change the FSYS
bus clock later.
The mentioned commit removed that behavior, what introduced a regression
on some Odroid XU3 boards. Frequency scaling of the FSYS bus causes
instability of the USB host operation, what can be observed as network
hangs. To restore old behavior, simply disable frequency scaling for the
FSYS bus.
Reported-by: Willy Wolff <willy.mh.wolff.ml@gmail.com>
Fixes: 1019fe2c72 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
properties.
esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
Signed-off-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix value of shunt-resistor property.
The LX2160A-RDB has 500 uOhm shunt for
the INA220, not 1000 uOhm. Unless
it will get wrong power consumption(1/2)
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the AR8035 datasheet:
"When using crystal, the clock is generated internally after power is
stable. For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms
requirement is satisfied."
Pass the 'reset-assert-us' property to describe such requirement.
While at it, use the 'reset-gpios' property inside the the mdio
node instead of the deprecated usage of 'phy-reset-gpios'.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4.
The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.
Improve the Ethernet representation by adding an mdio node with such
information.
This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now
expects the 'qca,clk-out-frequency' property to be passed via
device tree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Tested-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to the AR8031 datasheet:
"When using crystal, clock is generated internally after the power is
stable. In order to get reliable power-on-reset, it is recommended to
keep asserting the reset low signal long enough (10 ms) to ensure the
clock is stable and clock-to-reset (1 ms) requirement is satisfied."
Pass the 'reset-assert-us' property to describe such requirement.
While at it, use the 'reset-gpios' property inside the the mdio
node instead of the deprecated usage of 'phy-reset-gpios'.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx6qdl-sabresd has an Atheros AR8031 Ethernet PHY at address 1.
The AR8031 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.
Improve the Ethernet representation by adding an mdio node with such
information.
An advantage of adding the mdio node is that the AR8031 initialization
code in the mx6sabresd board file in U-Boot can totally be removed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Gateworks System Controller support to Gateworks Ventana boards:
- add dt bindings for GSC mfd driver and hwmon driver for ADC's and
fan controllers.
- add dt bindings for gpio-keys driver for push-button and interrupt events
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lubomir Rintel