Add VTM thermal support. In the Voltage Thermal Management
Module(VTM), K3 J72XX supplies a voltage reference and a temperature
sensor feature that are gathered in the band gap voltage and
temperature sensor (VBGAPTS) module. The band gap provides current and
voltage reference for its internal circuits and other analog IP
blocks. The analog-to-digital converter (ADC) produces an output value
that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no
active/passive cooling agent supported.
J721e SoCs have errata i2128: https://www.ti.com/lit/pdf/sprz455
The VTM Temperature Monitors (TEMPSENSORs) are trimmed during production,
with the resulting values stored in software-readable registers. Software
should use these register values when translating the Temperature
Monitor output codes to temperature values.
It has an involved workaround. Software needs to read the error codes for
-40C, 30C, 125C from the efuse for each device & derive a new look up table
for adc to temperature conversion. Involved calculating slopes & constants
using 3 different straight line equations with adc refernce codes as the
y-axis & error codes in the x-axis.
-40C to 30C
30C to 125C
125C to 150C
With the above 2 line equations we derive the full look-up table to
workaround the errata i2128 for j721e SoC.
Tested temperature reading on J721e SoC & J7200 SoC.
[daniel.lezcano@linaro.org: Generate look-up tables run-time]
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20220517172920.10857-3-j-keerthy@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add VTM bindings documentation. In the Voltage Thermal
Management Module(VTM), K3 J72XX supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517172920.10857-2-j-keerthy@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
of_find_node_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: e20db70dba ("thermal: imx_sc: add i.MX system controller thermal support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220517055121.18092-1-linmq006@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Qualcomm SC8280XP platform has three instances of the tsens block,
add a compatible for these instances.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503153436.960184-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatible for the LMh blocks found in the Qualcomm sc8180x
platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220502164504.3972938-2-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The LMh instances in the Qualcomm SC8180X platform looks to behave
similar to those in SM8150, add additional compatibles to allow
platform specific behavior to be added if needed.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220502164504.3972938-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
As per the latest RZ/G2L Hardware User's Manual (Rev.1.10 Apr, 2022),
the bit 31 of TSU OTP Calibration Register(OTPTSUTRIM) indicates
whether bit [11:0] of OTPTSUTRIM is valid or invalid.
This patch updates the code to reflect this change.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220428093346.7552-1-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Document RZ/G2UL TSU bindings. The TSU block on RZ/G2UL is identical to one
found on RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-tsu" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220501081930.23743-1-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add a missing s to __thermal_bind_param kernel doc comment.
This fixes the following sparse warnings:
drivers/thermal/thermal_of.c:50: warning: expecting prototype for struct __thermal_bind_param. Prototype was for struct __thermal_bind_params instead
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Link: https://lore.kernel.org/r/20220426064113.3787826-1-clabbe@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This change provides a simple daemon skeleton. It is an example of how
to use the thermal library which wraps all the complex code related to
the netlink and transforms it into a callback oriented code.
The goal of this skeleton is to give a base brick for anyone
interested in writing its own thermal engine or as an example to rely
on to write its own thermal monitoring implementation.
In the future, it will evolve with more features and hopefully more
logic.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-5-daniel.lezcano@linaro.org
The 'thermometer' tool allows to capture the temperature of a set of
thermal zones defined in a configuration file at a specified rate.
It is designed to have the lowest possible overhead. It will write the
captured temperature per thermal zone per file so making easier to
write a gnuplot script.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-4-daniel.lezcano@linaro.org
The next changes will provide a couple of tools using some common
functions provided by this library.
It provides basic wrappers for:
- mainloop
- logging
- timestamp
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-3-daniel.lezcano@linaro.org
The thermal framework implements a netlink notification mechanism to
be used by the userspace to have a thermal configuration discovery,
trip point changes or violation, cooling device changes notifications,
etc...
This library provides a level of abstraction for the thermal netlink
notification allowing the userspace to connect to the notification
mechanism more easily. The library is callback oriented.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-2-daniel.lezcano@linaro.org
The sensor driver which register through thermal_of interface doesn't
have an option to get thermal zone mode change notification from
thermal core.
Add support for change_mode ops in thermal_of interface so that sensor
driver can use this ops for mode change notification.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Link: https://lore.kernel.org/r/1646767586-31908-1-git-send-email-quic_manafm@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal sensor on BCM2711 is capable of negative temperatures, so don't
clamp the measurements at zero. Since this was the only use for variable t,
drop it.
This change based on a patch by Dom Cobley, who also tested the fix.
Fixes: 59b781352d ("thermal: Add BCM2711 thermal driver")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220412195423.104511-1-stefan.wahren@i2se.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
On apq8064 (msm8960) platforms the tsens device is created manually by
the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens
device instantiated from the device tree.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220406002648.393486-3-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatibility string for the thermal sensors on MSM8960/APQ8064
platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220406002648.393486-2-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Expose the thermal sensors on K3 AM654 as hwmon devices, so that
temperatures could be read using lm-sensors.
Signed-off-by: Massimiliano Minella <massimiliano.minella@gmail.com>
Link: https://lore.kernel.org/r/20220401151656.913166-1-massimiliano.minella@se.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add support for PMIC5 Gen2 ADC_TM, used on PMIC7 chips. It is a
close counterpart of PMIC7 ADC and has the same functionality as
PMIC5 ADC_TM, for threshold monitoring and interrupt generation.
It is present on PMK8350 alone, like PMIC7 ADC and can be used
to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
having ADC on a target, through PBS(Programmable Boot Sequence).
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/1648991869-20899-5-git-send-email-quic_jprakash@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Refactor code to support multiple generations of ADC_TM devices
by defining gen number, irq name and disable, configure, isr and
init APIs in the individual data structs.
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1648991869-20899-4-git-send-email-quic_jprakash@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add reverse scaling function for PMIC5 Gen2 ADC_TM, to convert
temperature to raw ADC code, for setting thresholds for
thermistor channels.
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/1648991869-20899-3-git-send-email-quic_jprakash@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add documentation for PMIC5 Gen2 ADC_TM peripheral.
It is used for monitoring ADC channel thresholds for PMIC7-type
PMICs. It is present on PMK8350, like PMIC7 ADC and can be used
to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
on a target, through PBS(Programmable Boot Sequence).
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1648991869-20899-2-git-send-email-quic_jprakash@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220110144039.5810-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Document RZ/V2L TSU bindings. The TSU block on RZ/V2L is identical to one
found on RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-tsu" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220308212315.4551-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
With the new OS handshake introduced by commit: "c7ff29763989 ("thermal:
int340x: Update OS policy capability handshake")", the "enabled" thermal
zone mode doesn't work in the same way as previously.
The "enabled" mode fails with -EINVAL when the new handshake is used.
To address this issue, when the new OS UUID mask is set:
- When the mode is "enabled", return 0 as the firmware already has the
latest policy mask.
- When the mode is "disabled", update the firmware with the UUID mask
of zero.
This way, the firmware can take over the thermal control.
Also reset the OS UUID mask, which allows user space to update with new
set of policies.
Fixes: c7ff297639 ("thermal: int340x: Update OS policy capability handshake")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits, removed unneeded parens ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some reverts of existing patches, which were necessary because of boot
issues due to wrong CPU clock handling and cache issues which led to
userspace segfaults with 32bit kernels.
Other than that just small updates and fixes, e.g. defconfig updates,
spelling fixes, a clocksource fix, boot topology fixes and a fix for
/proc/cpuinfo output to satisfy lscpu.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYngOJAAKCRD3ErUQojoP
X2+vAPwPf5JbrOkK9z7OM2xmRpfp1f0vuD5k6fxhc11+F5xpLQEAnxkLOX5//jGK
FmPVDub53u5+Wje+WFJQoqzJ4zyDQQQ=
=4UHA
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some reverts of existing patches, which were necessary because of boot
issues due to wrong CPU clock handling and cache issues which led to
userspace segfaults with 32bit kernels. Dave has a whole bunch of
upcoming cache fixes which I then plan to push in the next merge
window.
Other than that just small updates and fixes, e.g. defconfig updates,
spelling fixes, a clocksource fix, boot topology fixes and a fix for
/proc/cpuinfo output to satisfy lscpu"
* tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
Revert "parisc: Increase parisc_cache_flush_threshold setting"
parisc: Mark cr16 clock unstable on all SMP machines
parisc: Fix typos in comments
parisc: Change MAX_ADDRESS to become unsigned long long
parisc: Merge model and model name into one line in /proc/cpuinfo
parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
parisc: Update 32- and 64-bit defconfigs
parisc: Only list existing CPUs in cpu_possible_mask
Revert "parisc: Fix patch code locking and flushing"
Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"
- Fix the DWARF CFI in our VDSO time functions, allowing gdb to backtrace through them
correctly.
- Fix a buffer overflow in the papr_scm driver, only triggerable by hypervisor input.
- A fix in the recently added QoS handling for VAS (used for communicating with
coprocessors).
Thanks to: Alan Modra, Haren Myneni, Kajol Jain, Segher Boessenkool.
-----BEGIN PGP SIGNATURE-----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=sVeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix the DWARF CFI in our VDSO time functions, allowing gdb to
backtrace through them correctly.
- Fix a buffer overflow in the papr_scm driver, only triggerable by
hypervisor input.
- A fix in the recently added QoS handling for VAS (used for
communicating with coprocessors).
Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.
* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
powerpc/vdso: Fix incorrect CFI in gettimeofday.S
powerpc/pseries/vas: Use QoS credits from the userspace
- Prevent FPU state corruption. The condition in irq_fpu_usable() grants
FPU usage when the FPU is not used in the kernel. That's just wrong as
it does not take the fpregs_lock()'ed regions into account. If FPU usage
happens within such a region from interrupt context, then the FPU state
gets corrupted. That's a long standing bug, which got unearthed by the
recent changes to the random code.
- Josh wants to use his kernel.org email address
-----BEGIN PGP SIGNATURE-----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=PpOB
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A fix and an email address update:
- Prevent FPU state corruption.
The condition in irq_fpu_usable() grants FPU usage when the FPU is
not used in the kernel. That's just wrong as it does not take the
fpregs_lock()'ed regions into account. If FPU usage happens within
such a region from interrupt context, then the FPU state gets
corrupted.
That's a long standing bug, which got unearthed by the recent
changes to the random code.
- Josh wants to use his kernel.org email address"
* tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Prevent FPU state corruption
MAINTAINERS: Update Josh Poimboeuf's email address
- Mark the NMI safe time accessors notrace to prevent tracer recursion
when they are selected as trace clocks.
- John Stultz has a new email address
-----BEGIN PGP SIGNATURE-----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=LX9Y
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix and an email address update:
- Mark the NMI safe time accessors notrace to prevent tracer
recursion when they are selected as trace clocks.
- John Stultz has a new email address"
* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Mark NMI safe time accessors as notrace
MAINTAINERS: Update email address for John Stultz
request/free_irq() can result in a hang because the interrupt thread did
not reach the thread function and got stopped in the kthread core
already. That leaves a state active counter arround which makes a
invocation of synchronized_irq() on that interrupt hang forever. Ensure
that the thread reached the thread function in request_irq() to prevent
that.
-----BEGIN PGP SIGNATURE-----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=f7Ph
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A fix for the threaded interrupt core.
A quick sequence of request/free_irq() can result in a hang because
the interrupt thread did not reach the thread function and got stopped
in the kthread core already. That leaves a state active counter
arround which makes a invocation of synchronized_irq() on that
interrupt hang forever.
Ensure that the thread reached the thread function in request_irq() to
prevent that"
* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Synchronize interrupt thread startup
The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
Signed-off-by: Helge Deller <deller@gmx.de>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
MAX_ADDRESS (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
In commit 62773112ac ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 62773112ac ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY")
Signed-off-by: Helge Deller <deller@gmx.de>
Enable CONFIG_CGROUPS=y on 32-bit defconfig for systemd-support, and
enable CONFIG_NAMESPACES and CONFIG_USER_NS.
Signed-off-by: Helge Deller <deller@gmx.de>
The inventory knows which CPUs are in the system, so this bitmask should
be in cpu_possible_mask instead of the bitmask based on CONFIG_NR_CPUS.
Reset the cpu_possible_mask before scanning the system for CPUs, and
mark each existing CPU as possible during initialization of that CPU.
This avoids those warnings later on too:
register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
This reverts commit d97180ad68.
It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+
This reverts commit afdb4a5b1d.
It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.16+
early. The PASID needs to be tied to the mm lifetime, not to the address
space lifetime.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmJ3r7sTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQPsD/41fEE71j8VIElRbwQYnhmTa8Gm+F3X
J5+88ksOA9ho8HwEZsI56lIqCFchDolrk4BgJD8PYelotClHMjexPQkZvLB84hIM
KDvXsvPtaqGa/xYbnoSZM4M0litQBONVgSkW6a5qzOfxUrQbTsvqsDO0tUA5rCGm
FCNd5ACTwLDo3gp0TLKDXtkrTC8r/JBTG7TyOkQtezFpUFQNAV2TeEgzopkJNhEu
7Y1py5xkq08J4cRrK/k62DgPTdAdHQv97TB/SWYFLL3jjq4p8kJpUt1bi26BivIc
xIRudSmWKSz07KoL0/omE/nxpIzRMQSRmIl9FKHEsOa0hRoG8GYyOmpU84x3vHUn
XZg0OedN1555RNY5DnFoIBuTQTukJLGUO1rfc/9I4PaGtyomISuAtEDNR9vUWqTF
k1/2kx6FdxHCn8AXgx3Xp8qxi92FoyGFFfiib8nXu+ns0YhVTO2qKKoKK+WRhKjK
iOp1z/ZOZDiHOSCZNFOJ0wW7Hq6DD17WpJXPiPJ7XmCTZgaq9FecXwLhoXW6H251
/TexTYJt+z/MlS86godsPEh+mBDga8qh7TaMT8loswES26Anghh9CZT9ws3psqKc
ahQb6TJqbW3C5BKrUBMiDeE4iSF06ZQv/+l+iAFvmGDusx/t8QQ8i8oUFI2M7T11
rlbINCN6/UaJsw==
=CVeU
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull PASID fix from Thomas Gleixner:
"A single bugfix for the PASID management code, which freed the PASID
too early. The PASID needs to be tied to the mm lifetime, not to the
address space lifetime"
* tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Fix PASID use-after-free issue
It became slightly larger as I've been off in the last weeks.
The majority of changes at this PR is about ASoC, the fixes for
dmaengine and for for addressing issues reported by CI, as well as
other device-specific small fixes. Also, the fixes for FireWire
core stack and the usual HD-audio quirks are included.
-----BEGIN PGP SIGNATURE-----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=p7DB
-----END PGP SIGNATURE-----
Merge tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became slightly larger as I've been off in the last weeks.
The majority of changes here is about ASoC, fixes for dmaengine
and for addressing issues reported by CI, as well as other
device-specific small fixes.
Also, fixes for FireWire core stack and the usual HD-audio quirks
are included"
* tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
ASoC: atmel: mchp-pdmc: set prepare_slave_config
ASoC: max98090: Generate notifications on changes for custom control
ASoC: max98090: Reject invalid values in custom control put()
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers
firewire: core: extend card->lock in fw_core_handle_bus_reset
firewire: remove check of list iterator against head past the loop body
firewire: fix potential uaf in outbound_phy_packet_callback()
ASoC: rt9120: Correct the reg 0x09 size to one byte
ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops
ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec
ASoC: meson: axg-card: Fix nonatomic links
ASoC: meson: axg-tdm-interface: Fix formatters in trigger"
ASoC: soc-ops: fix error handling
ASoC: meson: Fix event generation for G12A tohdmi mux
ASoC: meson: Fix event generation for AUI CODEC mux
ASoC: meson: Fix event generation for AUI ACODEC mux
...
The last two users were floppy.c and ataflop.c respectively, it was
verified that no other drivers makes use of this, so let's remove it.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Denis Efremov <efremov@linux.com>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keerthy