Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_prog_run_array_cg to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-7-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_task_storage_free to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-6-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_iter_run_prog to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-5-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_inode_storage_free to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use rcu_read_lock_dont_migrate() and rcu_read_unlock_migrate() in
bpf_cgrp_storage_free to obtain better performance when PREEMPT_RCU is
not enabled.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250821090609.42508-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cpuset: add helpers for cpus_read_lock and cpuset_mutex locks.
Replace repetitive locking patterns with new helpers:
- cpuset_full_lock()
- cpuset_full_unlock()
This makes the code cleaner and ensures consistent lock ordering.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, free_cpumasks() can free both tmpmasks and cpumasks of a cpuset
(cs). However, these two operations are not logically coupled. To improve
code clarity:
1. Move cpumask freeing to free_cpuset()
2. Rename free_cpumasks() to free_tmpmasks()
This change enforces the single responsibility principle.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This includes a fix part of the KSPP (Kernel Self Protection Project) to replace
the deprecated and unsafe strcpy() calls in the kernel parameter string handler
and sysfs parameters for built-in modules. Single commit, no functional changes.
-----BEGIN PGP SIGNATURE-----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=8/92
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fix from Daniel Gomez:
"This includes a fix part of the KSPP (Kernel Self Protection Project)
to replace the deprecated and unsafe strcpy() calls in the kernel
parameter string handler and sysfs parameters for built-in modules.
Single commit, no functional changes"
* tag 'modules-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
params: Replace deprecated strcpy() with strscpy() and memcpy()
devm_request_threaded_irq() and devm_request_any_context_irq() currently
don't print any error message when interrupt registration fails.
This forces each driver to implement redundant error logging - over 2,000
lines of error messages exist across drivers. Additionally, when
upper-layer functions propagate these errors without logging, critical
debugging information is lost.
Add devm_request_result() helper to unify error reporting via dev_err_probe(),
Use it in devm_request_threaded_irq() and devm_request_any_context_irq()
printing device name, IRQ number, handler functions, and error code on failure
automatically.
Co-developed-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805092922.135500-2-panchuang@vivo.com
As the MSI controller on SG2044 uses PLIC as the underlying interrupt
controller, it needs to call irq_enable() and irq_disable() to
startup/shutdown interrupts. Otherwise, the MSI interrupt can not be
startup correctly and will not respond any incoming interrupt.
Introduce irq_chip_startup_parent() and irq_chip_shutdown_parent() to allow
the interrupt controller to call the irq_startup()/irq_shutdown() callbacks
of the parent interrupt chip.
In case the irq_startup()/irq_shutdown() callbacks are not implemented for
the parent interrupt chip, this will fallback to irq_chip_enable_parent()
or irq_chip_disable_parent().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250813232835.43458-2-inochiama@gmail.com
Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/
IA64 is gone and with it the last GENERIC_IRQ_LEGACY user.
Remove GENERIC_IRQ_LEGACY.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250814165949.hvtP03r4@linutronix.de
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding '.pc'
files are not installed, it reports that the libraries are missing and
confuses the developer. Instead, report that the pkg-config files are
missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space strings.
If the parser fails due to incorrect processing, it doesn't terminate the
buffer with a nul byte. Add a "failed" flag to the parser that gets set when
parsing fails and is used to know if the buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an error
path that can exit the function without unregistering it. Since the function
returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for read,
an iterator is created and sets its hash pointer to the associated hash that
represents filtering or notrace filtering to it. The issue is that the hash
it points to can change while the iteration is happening. All the locking
used to access the tracer's hashes are released which means those hashes can
change or even be freed. Using the hash pointed to by the iterator can cause
UAF bugs or similar.
Have the read of these files allocate and copy the corresponding hashes and
use that as that will keep them the same while the iterator is open. This
also simplifies the code as opening it for write already does an allocate
and copy, and now that the read is doing the same, there's no need to check
which way it was opened on the release of the file, and the iterator hash
can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the exit of
a function. When the exit is right after the entry, it combines the two
events into one with the output of "function();", instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events includes
storage that saves the entry event while it peaks at the next event in
the ring buffer. The peek can free the entry event so the iterator must
store the information to use it after the peek.
With the addition of function graph tracer recording the args, where the
args are a dynamic array in the entry event, the temp storage does not save
them. This causes the args to be corrupted or even cause a read of unsafe
memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer will be
printed to the console. But it can also be triggered by sysrq-z. If a
sysrq-z is triggered while a task is reading trace_pipe it can cause a race
in the ftrace_dump() where it checks if the buffer has content, then it
checks if the next event is available, and then prints the output
(regardless if the next event was available or not). Reading trace_pipe
at the same time can cause it to not be available, and this triggers a
WARN_ON in the print. Move the printing into the check if the next event
exists or not.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaKnAGRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qotPAQD02idezasiFi0vakLTR+0x/uAI2UOL
5RLfTwmZW7S1FwEAwOvGpKx3k/kUwDp5EReP34A+1Fqyc5Mvps4UCE1s4gM=
=ENHu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix rtla and latency tooling pkg-config errors
If libtraceevent and libtracefs is installed, but their corresponding
'.pc' files are not installed, it reports that the libraries are
missing and confuses the developer. Instead, report that the
pkg-config files are missing and should be installed.
- Fix overflow bug of the parser in trace_get_user()
trace_get_user() uses the parsing functions to parse the user space
strings. If the parser fails due to incorrect processing, it doesn't
terminate the buffer with a nul byte. Add a "failed" flag to the
parser that gets set when parsing fails and is used to know if the
buffer is fine to use or not.
- Remove a semicolon that was at an end of a comment line
- Fix register_ftrace_graph() to unregister the pm notifier on error
The register_ftrace_graph() registers a pm notifier but there's an
error path that can exit the function without unregistering it. Since
the function returns an error, it will never be unregistered.
- Allocate and copy ftrace hash for reader of ftrace filter files
When the set_ftrace_filter or set_ftrace_notrace files are open for
read, an iterator is created and sets its hash pointer to the
associated hash that represents filtering or notrace filtering to it.
The issue is that the hash it points to can change while the
iteration is happening. All the locking used to access the tracer's
hashes are released which means those hashes can change or even be
freed. Using the hash pointed to by the iterator can cause UAF bugs
or similar.
Have the read of these files allocate and copy the corresponding
hashes and use that as that will keep them the same while the
iterator is open. This also simplifies the code as opening it for
write already does an allocate and copy, and now that the read is
doing the same, there's no need to check which way it was opened on
the release of the file, and the iterator hash can always be freed.
- Fix function graph to copy args into temp storage
The output of the function graph tracer shows both the entry and the
exit of a function. When the exit is right after the entry, it
combines the two events into one with the output of "function();",
instead of showing:
function() {
}
In order to do this, the iterator descriptor that reads the events
includes storage that saves the entry event while it peaks at the
next event in the ring buffer. The peek can free the entry event so
the iterator must store the information to use it after the peek.
With the addition of function graph tracer recording the args, where
the args are a dynamic array in the entry event, the temp storage
does not save them. This causes the args to be corrupted or even
cause a read of unsafe memory.
Add space to save the args in the temp storage of the iterator.
- Fix race between ftrace_dump and reading trace_pipe
ftrace_dump() is used when a crash occurs where the ftrace buffer
will be printed to the console. But it can also be triggered by
sysrq-z. If a sysrq-z is triggered while a task is reading trace_pipe
it can cause a race in the ftrace_dump() where it checks if the
buffer has content, then it checks if the next event is available,
and then prints the output (regardless if the next event was
available or not). Reading trace_pipe at the same time can cause it
to not be available, and this triggers a WARN_ON in the print. Move
the printing into the check if the next event exists or not
* tag 'trace-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Also allocate and copy hash for reading of filter files
ftrace: Fix potential warning in trace_printk_seq during ftrace_dump
fgraph: Copy args in intermediate storage with entry
trace/fgraph: Fix the warning caused by missing unregister notifier
ring-buffer: Remove redundant semicolons
tracing: Limit access to parser->buffer when trace_get_user failed
rtla: Check pkg-config install
tools/latency-collector: Check pkg-config install
Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.
Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad1 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Tengda Wu <wutengda@huaweicloud.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When calling ftrace_dump_one() concurrently with reading trace_pipe,
a WARN_ON_ONCE() in trace_printk_seq() can be triggered due to a race
condition.
The issue occurs because:
CPU0 (ftrace_dump) CPU1 (reader)
echo z > /proc/sysrq-trigger
!trace_empty(&iter)
trace_iterator_reset(&iter) <- len = size = 0
cat /sys/kernel/tracing/trace_pipe
trace_find_next_entry_inc(&iter)
__find_next_entry
ring_buffer_empty_cpu <- all empty
return NULL
trace_printk_seq(&iter.seq)
WARN_ON_ONCE(s->seq.len >= s->seq.size)
In the context between trace_empty() and trace_find_next_entry_inc()
during ftrace_dump, the ring buffer data was consumed by other readers.
This caused trace_find_next_entry_inc to return NULL, failing to populate
`iter.seq`. At this point, due to the prior trace_iterator_reset, both
`iter.seq.len` and `iter.seq.size` were set to 0. Since they are equal,
the WARN_ON_ONCE condition is triggered.
Move the trace_printk_seq() into the if block that checks to make sure the
return value of trace_find_next_entry_inc() is non-NULL in
ftrace_dump_one(), ensuring the 'iter.seq' is properly populated before
subsequent operations.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@elte.hu>
Link: https://lore.kernel.org/20250822033343.3000289-1-wutengda@huaweicloud.com
Fixes: d769041f86 ("ring_buffer: implement new locking")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The output of the function graph tracer has two ways to display its
entries. One way for leaf functions with no events recorded within them,
and the other is for functions with events recorded inside it. As function
graph has an entry and exit event, to simplify the output of leaf
functions it combines the two, where as non leaf functions are separate:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) 0.391 us | __raise_softirq_irqoff();
2) 1.191 us | }
2) 2.086 us | }
The __raise_softirq_irqoff() function above is really two events that were
merged into one. Otherwise it would have looked like:
2) | invoke_rcu_core() {
2) | raise_softirq() {
2) | __raise_softirq_irqoff() {
2) 0.391 us | }
2) 1.191 us | }
2) 2.086 us | }
In order to do this merge, the reading of the trace output file needs to
look at the next event before printing. But since the pointer to the event
is on the ring buffer, it needs to save the entry event before it looks at
the next event as the next event goes out of focus as soon as a new event
is read from the ring buffer. After it reads the next event, it will print
the entry event with either the '{' (non leaf) or ';' and timestamps (leaf).
The iterator used to read the trace file has storage for this event. The
problem happens when the function graph tracer has arguments attached to
the entry event as the entry now has a variable length "args" field. This
field only gets set when funcargs option is used. But the args are not
recorded in this temp data and garbage could be printed. The entry field
is copied via:
data->ent = *curr;
Where "curr" is the entry field. But this method only saves the non
variable length fields from the structure.
Add a helper structure to the iterator data that adds the max args size to
the data storage in the iterator. Then simply copy the entire entry into
this storage (with size protection).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250820195522.51d4a268@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Tested-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/aJaxRVKverIjF4a6@lappy/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Now BPF program will run with migration disabled, so it is safe
to access this_cpu_inc_return(bpf_bprintf_nest_level).
Fixes: d9c9e4db18 ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250819125638.2544715-1-chen.dylane@linux.dev
Now that there's a proper SHA-1 library API, just use that instead of
the low-level SHA-1 compression function. This eliminates the need for
bpf_prog_calc_tag() to implement the SHA-1 padding itself. No
functional change; the computed tags remain the same.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250811201615.564461-1-ebiggers@kernel.org
There isn't yet a clear way to identify a set of "lost" time that
everyone (or at least a wider group of users) cares about. However,
users can perform some delay accounting by iterating over components of
interest. This patch allows cgroup v2 freezing time to be one of those
components.
Track the cumulative time that each v2 cgroup spends freezing and expose
it to userland via a new local stat file in cgroupfs. Thank you to
Michal, who provided the ASCII art in the updated documentation.
To access this value:
$ mkdir /sys/fs/cgroup/test
$ cat /sys/fs/cgroup/test/cgroup.stat.local
freeze_time_total 0
Ensure consistent freeze time reads with freeze_seq, a per-cgroup
sequence counter. Writes are serialized using the css_set_lock.
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A hung task can occur during [1] LTP cgroup testing when repeatedly
mounting/unmounting perf_event and net_prio controllers with
systemd.unified_cgroup_hierarchy=1. The hang manifests in
cgroup_lock_and_drain_offline() during root destruction.
Related case:
cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event
cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio
Call Trace:
cgroup_lock_and_drain_offline+0x14c/0x1e8
cgroup_destroy_root+0x3c/0x2c0
css_free_rwork_fn+0x248/0x338
process_one_work+0x16c/0x3b8
worker_thread+0x22c/0x3b0
kthread+0xec/0x100
ret_from_fork+0x10/0x20
Root Cause:
CPU0 CPU1
mount perf_event umount net_prio
cgroup1_get_tree cgroup_kill_sb
rebind_subsystems // root destruction enqueues
// cgroup_destroy_wq
// kill all perf_event css
// one perf_event css A is dying
// css A offline enqueues cgroup_destroy_wq
// root destruction will be executed first
css_free_rwork_fn
cgroup_destroy_root
cgroup_lock_and_drain_offline
// some perf descendants are dying
// cgroup_destroy_wq max_active = 1
// waiting for css A to die
Problem scenario:
1. CPU0 mounts perf_event (rebind_subsystems)
2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work
3. A dying perf_event CSS gets queued for offline after root destruction
4. Root destruction waits for offline completion, but offline work is
blocked behind root destruction in cgroup_destroy_wq (max_active=1)
Solution:
Split cgroup_destroy_wq into three dedicated workqueues:
cgroup_offline_wq – Handles CSS offline operations
cgroup_release_wq – Manages resource release
cgroup_free_wq – Performs final memory deallocation
This separation eliminates blocking in the CSS free path while waiting for
offline operations to complete.
[1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers
Fixes: 334c3679ec ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Reported-by: Gao Yingjie <gaoyingjie@uniontech.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Suggested-by: Teju Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
In the following toy program (reg states minimized for readability), R0
and R1 always have different values at instruction 6. This is obvious
when reading the program but cannot be guessed from ranges alone as
they overlap (R0 in [0; 0xc0000000], R1 in [1024; 0xc0000400]).
0: call bpf_get_prandom_u32#7 ; R0_w=scalar()
1: w0 = w0 ; R0_w=scalar(var_off=(0x0; 0xffffffff))
2: r0 >>= 30 ; R0_w=scalar(var_off=(0x0; 0x3))
3: r0 <<= 30 ; R0_w=scalar(var_off=(0x0; 0xc0000000))
4: r1 = r0 ; R1_w=scalar(var_off=(0x0; 0xc0000000))
5: r1 += 1024 ; R1_w=scalar(var_off=(0x400; 0xc0000000))
6: if r1 != r0 goto pc+1
Looking at tnums however, we can deduce that R1 is always different from
R0 because their tnums don't agree on known bits. This patch uses this
logic to improve is_scalar_branch_taken in case of BPF_JEQ and BPF_JNE.
This change has a tiny impact on complexity, which was measured with
the Cilium complexity CI test. That test covers 72 programs with
various build and load time configurations for a total of 970 test
cases. For 80% of test cases, the patch has no impact. On the other
test cases, the patch decreases complexity by only 0.08% on average. In
the best case, the verifier needs to walk 3% less instructions and, in
the worst case, 1.5% more. Overall, the patch has a small positive
impact, especially for our largest programs.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/be3ee70b6e489c49881cb1646114b1d861b5c334.1755694147.git.paul.chaignon@gmail.com
or aren't considered necessary for -stable kernels. 17 of these fixes are
for MM.
As usual, singletons all over the place, apart from a three-patch series
of KHO followup work from Pasha which is actually also a bunch of
singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaKfFVwAKCRDdBJ7gKXxA
jvZGAQCCRTRgwnYsH0op9Rlxs72zokENbErSzXweWLez31pNpAD/S7bVSjjk1mXr
BQ24ZadKUUomWkghwCusb9VomMeneg0=
=+uBT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaKdsDgAKCRAraS+Z+3y5
E85CAP0aLdMc7glIhzXITfY8If4HntXCKyDjEABDKlCKMea3MAD/d/lIHXkfL7vE
ZCZMhFOpDVdQ1ZojpfEs7wLipfbl/Ao=
=iUY0
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-08-21
We've added 9 non-merge commits during the last 3 day(s) which contain
a total of 13 files changed, 1027 insertions(+), 27 deletions(-).
The main changes are:
1) Added bpf dynptr support for accessing the metadata of a skb,
from Jakub Sitnicki.
The patches are merged from a stable branch bpf-next/skb-meta-dynptr.
The same patches have also been merged into bpf-next/master.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cover metadata access from a modified skb clone
selftests/bpf: Cover read/write to skb metadata at an offset
selftests/bpf: Cover write access to skb metadata via dynptr
selftests/bpf: Cover read access to skb metadata via dynptr
selftests/bpf: Parametrize test_xdp_context_tuntap
selftests/bpf: Pass just bpf_map to xdp_context_test helper
selftests/bpf: Cover verifier checks for skb_meta dynptr type
bpf: Enable read/write access to skb metadata through a dynptr
bpf: Add dynptr type for skb metadata
====================
Link: https://patch.msgid.link/20250821191827.2099022-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix NULL de-ref in css_rstat_exit() which could happen after allocation
failure.
- Fix a cpuset partition handling bug and a couple other misc issues.
- Doc spelling fix.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKd9WQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd3pAQCkqjlcHyKBOr8AXCcNmisyj0PvSFJwmcCWf3Mu
7gsJ0wEAjxqs+otIPHzjhQlRBMN1vhwn5/B/xVqKO57pCHtrGQY=
=zj8n
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix NULL de-ref in css_rstat_exit() which could happen after
allocation failure
- Fix a cpuset partition handling bug and a couple other misc issues
- Doc spelling fix
* tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup: fixed spelling mistakes in documentation
cgroup: avoid null de-ref in css_rstat_exit()
cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write()
cgroup/cpuset: Fix a partition error with CPU hotplug
cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key
- Fix a subtle bug during SCX enabling where a dead task skips init but
doesn't skip sched class switch leading to invalid task state transition
warning.
- Cosmetic fix in selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKdWkg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWI2AP9e+OTPPHa+sHeM7g3ngigF44nyvvRIPIMJHmZO
7CYT9AD/e+YI+atHzo5iSBcpGwjW8BSLc0ozdrkI0N7XFLXC4go=
=7Ti1
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a subtle bug during SCX enabling where a dead task skips init
but doesn't skip sched class switch leading to invalid task state
transition warning
- Cosmetic fix in selftests
* tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Remove duplicate sched.h header
sched/ext: Fix invalid task state transitions on class switch
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250805025000.346647-1-rongqianfeng@vivo.com
Adding uprobe as another exception to the seccomp filter alongside
with the uretprobe syscall.
Same as the uretprobe the uprobe syscall is installed by kernel as
replacement for the breakpoint exception and is limited to x86_64
arch and isn't expected to ever be supported in i386.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-21-jolsa@kernel.org
Putting together all the previously added pieces to support optimized
uprobes on top of 5-byte nop instruction.
The current uprobe execution goes through following:
- installs breakpoint instruction over original instruction
- exception handler hit and calls related uprobe consumers
- and either simulates original instruction or does out of line single step
execution of it
- returns to user space
The optimized uprobe path does following:
- checks the original instruction is 5-byte nop (plus other checks)
- adds (or uses existing) user space trampoline with uprobe syscall
- overwrites original instruction (5-byte nop) with call to user space
trampoline
- the user space trampoline executes uprobe syscall that calls related uprobe
consumers
- trampoline returns back to next instruction
This approach won't speed up all uprobes as it's limited to using nop5 as
original instruction, but we plan to use nop5 as USDT probe instruction
(which currently uses single byte nop) and speed up the USDT probes.
The arch_uprobe_optimize triggers the uprobe optimization and is called after
first uprobe hit. I originally had it called on uprobe installation but then
it clashed with elf loader, because the user space trampoline was added in a
place where loader might need to put elf segments, so I decided to do it after
first uprobe hit when loading is done.
The uprobe is un-optimized in arch specific set_orig_insn call.
The instruction overwrite is x86 arch specific and needs to go through 3 updates:
(on top of nop5 instruction)
- write int3 into 1st byte
- write last 4 bytes of the call instruction
- update the call instruction opcode
And cleanup goes though similar reverse stages:
- overwrite call opcode with breakpoint (int3)
- write last 4 bytes of the nop5 instruction
- write the nop5 first instruction byte
We do not unmap and release uprobe trampoline when it's no longer needed,
because there's no easy way to make sure none of the threads is still
inside the trampoline. But we do not waste memory, because there's just
single page for all the uprobe trampoline mappings.
We do waste frame on page mapping for every 4GB by keeping the uprobe
trampoline page mapped, but that seems ok.
We take the benefit from the fact that set_swbp and set_orig_insn are
called under mmap_write_lock(mm), so we can use the current instruction
as the state the uprobe is in - nop5/breakpoint/call trampoline -
and decide the needed action (optimize/un-optimize) based on that.
Attaching the speed up from benchs/run_bench_uprobes.sh script:
current:
usermode-count : 152.604 ± 0.044M/s
syscall-count : 13.359 ± 0.042M/s
--> uprobe-nop : 3.229 ± 0.002M/s
uprobe-push : 3.086 ± 0.004M/s
uprobe-ret : 1.114 ± 0.004M/s
uprobe-nop5 : 1.121 ± 0.005M/s
uretprobe-nop : 2.145 ± 0.002M/s
uretprobe-push : 2.070 ± 0.001M/s
uretprobe-ret : 0.931 ± 0.001M/s
uretprobe-nop5 : 0.957 ± 0.001M/s
after the change:
usermode-count : 152.448 ± 0.244M/s
syscall-count : 14.321 ± 0.059M/s
uprobe-nop : 3.148 ± 0.007M/s
uprobe-push : 2.976 ± 0.004M/s
uprobe-ret : 1.068 ± 0.003M/s
--> uprobe-nop5 : 7.038 ± 0.007M/s
uretprobe-nop : 2.109 ± 0.004M/s
uretprobe-push : 2.035 ± 0.001M/s
uretprobe-ret : 0.908 ± 0.001M/s
uretprobe-nop5 : 3.377 ± 0.009M/s
I see bit more speed up on Intel (above) compared to AMD. The big nop5
speed up is partly due to emulating nop5 and partly due to optimization.
The key speed up we do this for is the USDT switch from nop to nop5:
uprobe-nop : 3.148 ± 0.007M/s
uprobe-nop5 : 7.038 ± 0.007M/s
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-11-jolsa@kernel.org
Adding new uprobe syscall that calls uprobe handlers for given
'breakpoint' address.
The idea is that the 'breakpoint' address calls the user space
trampoline which executes the uprobe syscall.
The syscall handler reads the return address of the initial call
to retrieve the original 'breakpoint' address. With this address
we find the related uprobe object and call its consumers.
Adding the arch_uprobe_trampoline_mapping function that provides
uprobe trampoline mapping. This mapping is backed with one global
page initialized at __init time and shared by the all the mapping
instances.
We do not allow to execute uprobe syscall if the caller is not
from uprobe trampoline mapping.
The uprobe syscall ensures the consumer (bpf program) sees registers
values in the state before the trampoline was called.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-10-jolsa@kernel.org
Adding support to add special mapping for user space trampoline with
following functions:
uprobe_trampoline_get - find or add uprobe_trampoline
uprobe_trampoline_put - remove or destroy uprobe_trampoline
The user space trampoline is exported as arch specific user space special
mapping through tramp_mapping, which is initialized in following changes
with new uprobe syscall.
The uprobe trampoline needs to be callable/reachable from the probed address,
so while searching for available address we use is_reachable_by_call function
to decide if the uprobe trampoline is callable from the probe address.
All uprobe_trampoline objects are stored in uprobes_state object and are
cleaned up when the process mm_struct goes down. Adding new arch hooks
for that, because this change is x86_64 specific.
Locking is provided by callers in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250720112133.244369-9-jolsa@kernel.org
Making update_ref_ctr call in uprobe_write conditional based
on do_ref_ctr argument. This way we can use uprobe_write for
instruction update without doing ref_ctr_offset update.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-8-jolsa@kernel.org
The uprobe_write has special path to restore the original page when we
write original instruction back. This happens when uprobe_write detects
that we want to write anything else but breakpoint instruction.
Moving the detection away and passing it to uprobe_write as argument,
so it's possible to write different instructions (other than just
breakpoint and rest).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-7-jolsa@kernel.org
Adding nbytes argument to uprobe_write and related functions as
preparation for writing whole instructions in following changes.
Also renaming opcode arguments to insn, which seems to fit better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-6-jolsa@kernel.org
Adding uprobe_write function that does what uprobe_write_opcode did
so far, but allows to pass verify callback function that checks the
memory location before writing the opcode.
It will be used in following changes to implement specific checking
logic for instruction update.
The uprobe_write_opcode now calls uprobe_write with verify_opcode as
the verify callback.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-5-jolsa@kernel.org
Making copy_from_page global and adding uprobe prefix.
Adding the uprobe prefix to copy_to_page as well for symmetry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-4-jolsa@kernel.org
We are about to add uprobe trampoline, so cleaning up the namespace.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-3-jolsa@kernel.org
Currently unapply_uprobe takes mmap_read_lock, but it might call
remove_breakpoint which eventually changes user pages.
Current code writes either breakpoint or original instruction, so it can
go away with read lock as explained in here [1]. But with the upcoming
change that writes multiple instructions on the probed address we need
to ensure that any update to mm's pages is exclusive.
[1] https://lore.kernel.org/all/20240710140045.GA1084@redhat.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250720112133.244369-2-jolsa@kernel.org
- tracing: fprobe-event: Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but
unless the user specifies its event name, it makes an event with
the wildcards. Replace the wildcard '*' with the underscore '_'.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmimVxYbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bjlMIALQlChmfvICQBq7uGUJs
+ZiZUielrlBbxjRqSCNXibt5tuA3NJr2uuZ6DT5JVF1On/c9onlabiXoFb/SWmRa
nyWyKsrEgIb3X7QjnpR7MDurxwK98OJMzmFwtFa3gzFD/PUeb9t3qyx+yt/k1CUV
uqsB00LrbHMYLDHQufR2pWrGooVejznt92gFCPIfEFJnEJ9hiaFfK6nBmzrjMmZS
A3d70+6r5v76cANMwlYTxB53ewbiOuUvmDT09d0N+zg4y/5BZia8Asnjf3iBjIUB
V/ePLO598Po6XlIKhjVHD1nmZezrvff+IToIZOfNXerDrzwqrKxXqUdce6VB6KEU
VGU=
=i5Hg
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
"Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but unless
the user specifies its event name, it makes an event with the
wildcards. Replace the wildcard '*' with the underscore '_'"
* tag 'probes-fixes-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe-event: Sanitize wildcard for fprobe event name
Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.
/sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
/sys/kernel/tracing # cat dynamic_events
f:fprobes/mutex*__entry mutex*
/sys/kernel/tracing # ls events/fprobes/
enable filter mutex*__entry
To fix this, replace the wildcard ('*') with an underscore.
Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/
Fixes: 334e5519c3 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
This warning was triggered during testing on v6.16:
notifier callback ftrace_suspend_notifier_call already registered
WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0
...
Call Trace:
<TASK>
blocking_notifier_chain_register+0x34/0x60
register_ftrace_graph+0x330/0x410
ftrace_profile_write+0x1e9/0x340
vfs_write+0xf8/0x420
? filp_flush+0x8a/0xa0
? filp_close+0x1f/0x30
? do_dup2+0xaf/0x160
ksys_write+0x65/0xe0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
When writing to the function_profile_enabled interface, the notifier was
not unregistered after start_graph_tracing failed, causing a warning the
next time function_profile_enabled was written.
Fixed by adding unregister_pm_notifier in the exception path.
Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com
Fixes: 4a2b8dda3f ("tracing/function-graph-tracer: fix a regression while suspend to disk")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c0 ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During boot scratch area is allocated based on command line parameters or
auto calculated. However, scratch area may fail to allocate, and in that
case KHO is disabled. Currently, no warning is printed that KHO is
disabled, which makes it confusing for the end user to figure out why KHO
is not available. Add the missing warning message.
Link: https://lkml.kernel.org/r/20250808201804.772010-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KHO uses struct pages for the preserved memory early in boot, however,
with deferred struct page initialization, only a small portion of memory
has properly initialized struct pages.
This problem was detected where vmemmap is poisoned, and illegal flag
combinations are detected.
Don't allow them to be enabled together, and later we will have to teach
KHO to work properly with deferred struct page init kernel feature.
Link: https://lkml.kernel.org/r/20250808201804.772010-3-pasha.tatashin@soleen.com
Fixes: 4e1d010e3b ("kexec: add config option for KHO")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Several KHO Hotfixes".
Three unrelated fixes for Kexec Handover.
This patch (of 3):
Lockdep shows the following warning:
INFO: trying to register non-static key. The code is fine but needs
lockdep annotation, or maybe you didn't initialize this object before use?
turning off the locking correctness validator.
[<ffffffff810133a6>] dump_stack_lvl+0x66/0xa0
[<ffffffff8136012c>] assign_lock_key+0x10c/0x120
[<ffffffff81358bb4>] register_lock_class+0xf4/0x2f0
[<ffffffff813597ff>] __lock_acquire+0x7f/0x2c40
[<ffffffff81360cb0>] ? __pfx_hlock_conflict+0x10/0x10
[<ffffffff811707be>] ? native_flush_tlb_global+0x8e/0xa0
[<ffffffff8117096e>] ? __flush_tlb_all+0x4e/0xa0
[<ffffffff81172fc2>] ? __kernel_map_pages+0x112/0x140
[<ffffffff813ec327>] ? xa_load_or_alloc+0x67/0xe0
[<ffffffff81359556>] lock_acquire+0xe6/0x280
[<ffffffff813ec327>] ? xa_load_or_alloc+0x67/0xe0
[<ffffffff8100b9e0>] _raw_spin_lock+0x30/0x40
[<ffffffff813ec327>] ? xa_load_or_alloc+0x67/0xe0
[<ffffffff813ec327>] xa_load_or_alloc+0x67/0xe0
[<ffffffff813eb4c0>] kho_preserve_folio+0x90/0x100
[<ffffffff813ebb7f>] __kho_finalize+0xcf/0x400
[<ffffffff813ebef4>] kho_finalize+0x34/0x70
This is becase xa has its own lock, that is not initialized in
xa_load_or_alloc.
Modifiy __kho_preserve_order(), to properly call
xa_init(&new_physxa->phys_bits);
Link: https://lkml.kernel.org/r/20250808201804.772010-2-pasha.tatashin@soleen.com
Fixes: fc33e4b44b ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Vasilevsky <dave@vasilevsky.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaKRttQAKCRCRxhvAZXjc
onwmAP98oaMku7CttHEVwJj8KD7luXvZWbvB23TPGmF6BNWg9wEAraks5EzZZJy3
+4xWn10b6R+gXUqvwqr+bf0ufk3c+gc=
=Nbg0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix two memory leaks in pidfs
- Prevent changing the idmapping of an already idmapped mount without
OPEN_TREE_CLONE through open_tree_attr()
- Don't fail listing extended attributes in kernfs when no extended
attributes are set
- Fix the return value in coredump_parse()
- Fix the error handling for unbuffered writes in netfs
- Fix broken data integrity guarantees for O_SYNC writes via iomap
- Fix UAF in __mark_inode_dirty()
- Keep inode->i_blkbits constant in fuse
- Fix coredump selftests
- Fix get_unused_fd_flags() usage in do_handle_open()
- Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES
- Fix use-after-free in bh_read()
- Fix incorrect lflags value in the move_mount() syscall
* tag 'vfs-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signal: Fix memory leak for PIDFD_SELF* sentinels
kernfs: don't fail listing extended attributes
coredump: Fix return value in coredump_parse()
fs/buffer: fix use-after-free when call bh_read() helper
pidfs: Fix memory leak in pidfd_info()
netfs: Fix unbuffered write error handling
fhandle: do_handle_open() should get FD with user flags
module: Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES
fs: fix incorrect lflags value in the move_mount syscall
selftests/coredump: Remove the read() that fails the test
fuse: keep inode->i_blkbits constant
iomap: Fix broken data integrity guarantees for O_SYNC writes
selftests/mount_setattr: add smoke tests for open_tree_attr(2) bug
open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE
fs: writeback: fix use-after-free in __mark_inode_dirty()
Commit f08d0c3a71 ("pidfd: add PIDFD_SELF* sentinels to refer to own
thread/process") introduced a leak by acquiring a pid reference through
get_task_pid(), which increments pid->count but never drops it with
put_pid().
As a result, kmemleak reports unreferenced pid objects after running
tools/testing/selftests/pidfd/pidfd_test, for example:
unreferenced object 0xff1100206757a940 (size 160):
comm "pidfd_test", pid 16965, jiffies 4294853028
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 fd 57 50 04 .............WP.
5e 44 00 00 00 00 00 00 18 de 34 17 01 00 11 ff ^D........4.....
backtrace (crc cd8844d4):
kmem_cache_alloc_noprof+0x2f4/0x3f0
alloc_pid+0x54/0x3d0
copy_process+0xd58/0x1740
kernel_clone+0x99/0x3b0
__do_sys_clone3+0xbe/0x100
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by calling put_pid() after do_pidfd_send_signal() returns.
Fixes: f08d0c3a71 ("pidfd: add PIDFD_SELF* sentinels to refer to own thread/process")
Signed-off-by: Adrian Huang (Lenovo) <adrianhuang0701@gmail.com>
Link: https://lore.kernel.org/20250818134310.12273-1-adrianhuang0701@gmail.com
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
task_pid_vnr(another_task) will crash if the caller was already reaped.
The pid_alive(current) check can't really help, the parent/debugger can
call release_task() right after this check.
This also means that even task_ppid_nr_ns(current, NULL) is not safe,
pid_alive() only ensures that it is safe to dereference ->real_parent.
Change __task_pid_nr_ns() to ensure ns != NULL.
Originally-by: 高翔 <gaoxiang17@xiaomi.com>
Link: https://lore.kernel.org/all/20250802022123.3536934-1-gxxa03070307@gmail.com/
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/20250810173604.GA19991@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that we can create a dynptr to skb metadata, make reads to the metadata
area possible with bpf_dynptr_read() or through a bpf_dynptr_slice(), and
make writes to the metadata area possible with bpf_dynptr_write() or
through a bpf_dynptr_slice_rdwr().
Note that for cloned skbs which share data with the original, we limit the
skb metadata dynptr to be read-only since we don't unclone on a
bpf_dynptr_write to metadata.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250814-skb-metadata-thru-dynptr-v7-2-8a39e636e0fb@cloudflare.com
Add a dynptr type, similar to skb dynptr, but for the skb metadata access.
The dynptr provides an alternative to __sk_buff->data_meta for accessing
the custom metadata area allocated using the bpf_xdp_adjust_meta() helper.
More importantly, it abstracts away the fact where the storage for the
custom metadata lives, which opens up the way to persist the metadata by
relocating it as the skb travels through the network stack layers.
Writes to skb metadata invalidate any existing skb payload and metadata
slices. While this is more restrictive that needed at the moment, it leaves
the door open to reallocating the metadata on writes, and should be only a
minor inconvenience to the users.
Only the program types which can access __sk_buff->data_meta today are
allowed to create a dynptr for skb metadata at the moment. We need to
modify the network stack to persist the metadata across layers before
opening up access to other BPF hooks.
Once more BPF hooks gain access to skb_meta dynptr, we will also need to
add a read-only variant of the helper similar to
bpf_dynptr_from_skb_rdonly.
skb_meta dynptr ops are stubbed out and implemented by subsequent changes.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Link: https://patch.msgid.link/20250814-skb-metadata-thru-dynptr-v7-1-8a39e636e0fb@cloudflare.com
When a BPF program which is being loaded reaches the map limit
(MAX_USED_MAPS) or the BTF limit (MAX_USED_BTFS) the -E2BIG is
returned. However, in the former case there is an accompanying
verifier verbose message, and in the latter case there is not.
Add a verbose message to make the behaviour symmetrical.
Reported-by: Kevin Sheldrake <kevin.sheldrake@isovalent.com>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250816151554.902995-1-a.s.protopopov@gmail.com
The get_next_cpu() function was only used in one place to find
the next possible CPU, which can be replaced by cpumask_next_wrap().
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250818032344.23229-1-wangfushuai@baidu.com
type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to prevent
an error on PowerPC which does user read and write accesses differently
-----BEGIN PGP SIGNATURE-----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=q1tX
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Make sure sanity checks down in the mutex lock path happen on the
correct type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to
prevent an error on PowerPC which does user read and write accesses
differently
* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
futex: Use user_write_access_begin/_end() in futex_put_value()
strcpy() is deprecated; use strscpy() and memcpy() instead.
In param_set_copystring(), we can safely use memcpy() because we already
know the length of the source string 'val' and that it is guaranteed to
be NUL-terminated within the first 'kps->maxlen' bytes.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250813132200.184064-2-thorsten.blum@linux.dev
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
The recently fixed reference count leaks could have been detected by using
refcount_t and refcount_t would have mitigated the potential overflow at
least.
Now that the code is properly structured, convert the mmap() related
mmap_count variants over to refcount_t.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104020.071507932@infradead.org
Needed because refcount_inc() doesn't allow the 0->1 transition.
Specifically, this is the case where we've created the RB, this means
there was no RB, and as such there could not have been an mmap.
Additionally we hold mmap_mutex to serialize everything.
This must be the first.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250812104019.956479989@infradead.org
Mostly just re-indent noise.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.838047976@infradead.org
Move the RB buffer allocation branch into its own function.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.722214699@infradead.org
Move the AUX buffer allocation branch into its own function.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.494205648@infradead.org
After duplicating the common code into the rb/aux branches is it
possible to use a simple guard() for the aux_mutex. Making the aux
branch self-contained.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.246250452@infradead.org
unlock and aux_unlock are now identical, remove the aux_unlock one.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.131293512@infradead.org
if (cond) {
A;
} else {
B;
}
C;
into
if (cond) {
A;
C;
} else {
B;
C;
}
Notably C has a success branch and both A and B have two places for
success. For A (rb case), duplicate the success case because later
patches will result in them no longer being identical. For B (aux
case), share using goto (cleaned up later).
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.016252852@infradead.org
if (cond) {
A;
} else {
B;
}
if (cond) {
C;
} else {
D;
}
into:
if (cond) {
A;
C;
} else {
B;
D;
}
Notably the conditions are not identical in form, but are equivalent.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104018.900078502@infradead.org
Similarly to the mlock limit calculation the VM accounting is required for
both the ringbuffer and the AUX buffer allocations.
To prepare for splitting them out into separate functions, move the
accounting into a helper function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104018.660347811@infradead.org
To prepare for splitting the buffer allocation out into separate functions
for the ring buffer and the AUX buffer, split out mlock limit handling into
a helper function, which can be called from both.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104018.541975109@infradead.org
It is already checked whether the VMA size is the same as
nr_pages * PAGE_SIZE, so later checking both:
aux_size == vma_size && aux_size == nr_pages * PAGE_SIZE
is redundant. Remove the vma_size check as nr_pages is what is actually
used in the allocation function. That prepares for splitting out the buffer
allocation into separate functions, so that only nr_pages needs to be
handed in.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104018.424519320@infradead.org
Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can
leave event->hw.idx at -1. When PMU drivers later attempt to use this
negative index as a shift exponent in bitwise operations, it leads to UBSAN
shift-out-of-bounds reports.
The issue is a logical flaw in how event groups handle throttling when some
members are intentionally disabled. Based on the analysis and the
reproducer provided by Mark Rutland (this issue on both arm64 and x86-64).
The scenario unfolds as follows:
1. A group leader event is configured with a very aggressive sampling
period (e.g., sample_period = 1). This causes frequent interrupts and
triggers the throttling mechanism.
2. A child event in the same group is created in a disabled state
(.disabled = 1). This event remains in PERF_EVENT_STATE_OFF.
Since it hasn't been scheduled onto the PMU, its event->hw.idx remains
initialized at -1.
3. When throttling occurs, perf_event_throttle_group() and later
perf_event_unthrottle_group() iterate through all siblings, including
the disabled child event.
4. perf_event_throttle()/unthrottle() are called on this inactive child
event, which then call event->pmu->start()/stop().
5. The PMU driver receives the event with hw.idx == -1 and attempts to
use it as a shift exponent. e.g., in macros like PMCNTENSET(idx),
leading to the UBSAN report.
The throttling mechanism attempts to start/stop events that are not
actively scheduled on the hardware.
Move the state check into perf_event_throttle()/perf_event_unthrottle() so
that inactive events are skipped entirely. This ensures only active events
with a valid hw.idx are processed, preventing undefined behavior and
silencing UBSAN warnings. The corrected check ensures true before
proceeding with PMU operations.
The problem can be reproduced with the syzkaller reproducer:
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250812181046.292382-2-ysk@kzalloc.com
When running an XDP bpf_prog on the remote CPU in cpumap code
then we must disable the direct return optimization that
xdp_return can perform for mem_type page_pool. This optimization
assumes code is still executing under RX-NAPI of the original
receiving CPU, which isn't true on this remote CPU.
The cpumap code already disabled this via helpers
xdp_set_return_frame_no_direct() and xdp_clear_return_frame_no_direct(),
but the scope didn't include xdp_do_flush().
When doing XDP_REDIRECT towards e.g devmap this causes the
function bq_xmit_all() to run with direct return optimization
enabled. This can lead to hard to find bugs. The issue
only happens when bq_xmit_all() cannot ndo_xdp_xmit all
frames and them frees them via xdp_return_frame_rx_napi().
Fix by expanding scope to include xdp_do_flush(). This was found
by Dragos Tatulea.
Fixes: 11941f8a85 ("bpf: cpumap: Implement generic cpumap")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Reported-by: Chris Arges <carges@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Chris Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/175519587755.3008742.1088294435150406835.stgit@firesoul
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
The CS_ONLINE flag was introduced prior to the CSS_ONLINE flag in the
cpuset subsystem. Currently, the flag setting sequence is as follows:
1. cpuset_css_online() sets CS_ONLINE
2. css->flags gets CSS_ONLINE set
...
3. cgroup->kill_css sets CSS_DYING
4. cpuset_css_offline() clears CS_ONLINE
5. css->flags clears CSS_ONLINE
The is_cpuset_online() check currently occurs between steps 1 and 3.
However, it would be equally safe to perform this check between steps 2
and 3, as CSS_ONLINE provides the same synchronization guarantee as
CS_ONLINE.
Since CS_ONLINE is redundant with CSS_ONLINE and provides no additional
synchronization benefits, we can safely remove it to simplify the code.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Someone got a bit carried away deleting tabs. Add it back.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When CONFIG_DMA_DIRECT_REMAP is enabled, atomic pool pages are
remapped via dma_common_contiguous_remap() using the supplied
pgprot. Currently, the mapping uses
pgprot_dmacoherent(PAGE_KERNEL), which leaves the memory encrypted
on systems with memory encryption enabled (e.g., ARM CCA Realms).
This can cause the DMA layer to fail or crash when accessing the
memory, as the underlying physical pages are not configured as
expected.
Fix this by requesting a decrypted mapping in the vmap() call:
pgprot_decrypted(pgprot_dmacoherent(PAGE_KERNEL))
This ensures that atomic pool memory is consistently mapped
unencrypted.
Cc: stable@vger.kernel.org
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250811181759.998805-1-sdonthineni@nvidia.com
The __clear_task_blocked_on() helper added a number of sanity
checks ensuring we hold the mutex wait lock and that the task
we are clearing blocked_on pointer (if set) matches the mutex.
However, there is an edge case in the _ww_mutex_wound() logic
where we need to clear the blocked_on pointer for the task that
owns the mutex, not the task that is waiting on the mutex.
For this case the sanity checks aren't valid, so handle this
by allowing a NULL lock to skip the additional checks.
K Prateek Nayak and Maarten Lankhorst also pointed out that in
this case where we don't hold the owner's mutex wait_lock, we
need to be a bit more careful using READ_ONCE/WRITE_ONCE in both
the __clear_task_blocked_on() and __set_task_blocked_on()
implementations to avoid accidentally tripping WARN_ONs if two
instances race. So do that here as well.
This issue was easier to miss, I realized, as the test-ww_mutex
driver only exercises the wait-die class of ww_mutexes. I've
sent a patch[1] to address this so the logic will be easier to
test.
[1]: https://lore.kernel.org/lkml/20250801023358.562525-2-jstultz@google.com/
Fixes: a4f0b6fef4 ("locking/mutex: Add p->blocked_on wrappers for correctness checks")
Closes: https://lore.kernel.org/lkml/68894443.a00a0220.26d0e1.0015.GAE@google.com/
Reported-by: syzbot+602c4720aed62576cd79@syzkaller.appspotmail.com
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250805001026.2247040-1-jstultz@google.com
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a8919758 ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
The 'backedge' pointer is allocated with kzalloc(), which returns
physically contiguous memory. Using kvfree() to deallocate such
memory is functionally safe but semantically incorrect.
Replace kvfree() with kfree() to avoid unnecessary is_vmalloc_addr()
check in kvfree().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250811123949.552885-1-rongqianfeng@vivo.com
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
No functional changes.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250804122731.460158-1-rongqianfeng@vivo.com
When enabling a sched_ext scheduler, we may trigger invalid task state
transitions, resulting in warnings like the following (which can be
easily reproduced by running the hotplug selftest in a loop):
sched_ext: Invalid task state transition 0 -> 3 for fish[770]
WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0
...
RIP: 0010:scx_set_task_state+0x7c/0xc0
...
Call Trace:
<TASK>
scx_enable_task+0x11f/0x2e0
switching_to_scx+0x24/0x110
scx_enable.isra.0+0xd14/0x13d0
bpf_struct_ops_link_create+0x136/0x1a0
__sys_bpf+0x1edd/0x2c30
__x64_sys_bpf+0x21/0x30
do_syscall_64+0xbb/0x370
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This happens because we skip initialization for tasks that are already
dead (with their usage counter set to zero), but we don't exclude them
during the scheduling class transition phase.
Fix this by also skipping dead tasks during class swiching, preventing
invalid task state transitions.
Fixes: a8532fac7b ("sched_ext: TASK_DEAD tasks must be switched into SCX on ops_enable")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit cec199c5e3 ("futex: Implement FUTEX2_NUMA") introduced the
futex_put_value() helper to write a value to the given user
address.
However, it uses user_read_access_begin() before the write. For
architectures that differentiate between read and write accesses, like
PowerPC, futex_put_value() fails with -EFAULT.
Fix that by using the user_write_access_begin/user_write_access_end() pair
instead.
Fixes: cec199c5e3 ("futex: Implement FUTEX2_NUMA")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811141147.322261-1-longman@redhat.com
Correct the misspelling of "searching" (was "serarching")
in the function documentation for audit_update_lsm_rules.
Found via code inspection, no functional impact.
Signed-off-by: Kieran Moy <kfatyuip@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
strcpy() is deprecated; use strscpy() instead.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix two indentation errors in audit_log_exit().
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Restructure the call site for dma_contiguous_early_fixup() to
where the reserved_mem nodes are being parsed from the DT so that
dma_mmu_remap[] is populated before dma_contiguous_remap() is called.
Fixes: 8a6e02d0c0 ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250806172421.2748302-1-oreoluwa.babatunde@oss.qualcomm.com
RCU re-initializes the deferred QS irq work everytime before attempting
to queue it. However there are situations where the irq work is
attempted to be queued even though it is already queued. In that case
re-initializing messes-up with the irq work queue that is about to be
handled.
The chances for that to happen are higher when the architecture doesn't
support self-IPIs and irq work are then all lazy, such as with the
following sequence:
1) rcu_read_unlock() is called when IRQs are disabled and there is a
grace period involving blocked tasks on the node. The irq work
is then initialized and queued.
2) The related tasks are unblocked and the CPU quiescent state
is reported. rdp->defer_qs_iw_pending is reset to DEFER_QS_IDLE,
allowing the irq work to be requeued in the future (note the previous
one hasn't fired yet).
3) A new grace period starts and the node has blocked tasks.
4) rcu_read_unlock() is called when IRQs are disabled again. The irq work
is re-initialized (but it's queued! and its node is cleared) and
requeued. Which means it's requeued to itself.
5) The irq work finally fires with the tick. But since it was requeued
to itself, it loops and hangs.
Fix this with initializing the irq work only once before the CPU boots.
Fixes: b41642c877 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508071303.c1134cce-lkp@intel.com
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
-----BEGIN PGP SIGNATURE-----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=VUGL
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
-----BEGIN PGP SIGNATURE-----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=Xpyt
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent a futex hash leak due to different mm lifetimes
* tag 'locking_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex cleanup to __mmdrop()
css_rstat_exit() may be called asynchronously in scenarios where preceding
calls to css_rstat_init() have not completed. One such example is this
sequence below:
css_create(...)
{
...
init_and_link_css(css, ...);
err = percpu_ref_init(...);
if (err)
goto err_free_css;
err = cgroup_idr_alloc(...);
if (err)
goto err_free_css;
err = css_rstat_init(css, ...);
if (err)
goto err_free_css;
...
err_free_css:
INIT_RCU_WORK(&css->destroy_rwork, css_free_rwork_fn);
queue_rcu_work(cgroup_destroy_wq, &css->destroy_rwork);
return ERR_PTR(err);
}
If any of the three goto jumps are taken, async cleanup will begin and
css_rstat_exit() will be invoked on an uninitialized css->rstat_cpu.
Avoid accessing the unitialized field by returning early in
css_rstat_exit() if this is the case.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Fixes: 5da3bfa029 ("cgroup: use separate rstat trees for each subsystem")
Cc: stable@vger.kernel.org # v6.16
Reported-by: syzbot+8d052e8b99e40bc625ed@syzkaller.appspotmail.com
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
The css_get/put() calls in cpuset_partition_write() are unnecessary as
an active reference of the kernfs node will be taken which will prevent
its removal and guarantee the existence of the css. Only the online
check is needed.
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It was found during testing that an invalid leaf partition with an
empty effective exclusive CPU list can become a valid empty partition
with no CPU afer an offline/online operation of an unrelated CPU. An
empty partition root is allowed in the special case that it has no
task in its cgroup and has distributed out all its CPUs to its child
partitions. That is certainly not the case here.
The problem is in the cpumask_subsets() test in the hotplug case
(update with no new mask) of update_parent_effective_cpumask() as it
also returns true if the effective exclusive CPU list is empty. Fix that
by addding the cpumask_empty() test to root out this exception case.
Also add the cpumask_empty() test in cpuset_hotplug_update_tasks()
to avoid calling update_parent_effective_cpumask() for this special case.
Fixes: 0c7f293efc ("cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The following lockdep splat was observed.
[ 812.359086] ============================================
[ 812.359089] WARNING: possible recursive locking detected
[ 812.359097] --------------------------------------------
[ 812.359100] runtest.sh/30042 is trying to acquire lock:
[ 812.359105] ffffffffa7f27420 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0xe/0x20
[ 812.359131]
[ 812.359131] but task is already holding lock:
[ 812.359134] ffffffffa7f27420 (cpu_hotplug_lock){++++}-{0:0}, at: cpuset_write_resmask+0x98/0xa70
:
[ 812.359267] Call Trace:
[ 812.359272] <TASK>
[ 812.359367] cpus_read_lock+0x3c/0xe0
[ 812.359382] static_key_enable+0xe/0x20
[ 812.359389] check_insane_mems_config.part.0+0x11/0x30
[ 812.359398] cpuset_write_resmask+0x9f2/0xa70
[ 812.359411] cgroup_file_write+0x1c7/0x660
[ 812.359467] kernfs_fop_write_iter+0x358/0x530
[ 812.359479] vfs_write+0xabe/0x1250
[ 812.359529] ksys_write+0xf9/0x1d0
[ 812.359558] do_syscall_64+0x5f/0xe0
Since commit d74b27d63a ("cgroup/cpuset: Change cpuset_rwsem
and hotplug lock order"), the ordering of cpu hotplug lock
and cpuset_mutex had been reversed. That patch correctly
used the cpuslocked version of the static branch API to enable
cpusets_pre_enable_key and cpusets_enabled_key, but it didn't do the
same for cpusets_insane_config_key.
The cpusets_insane_config_key can be enabled in the
check_insane_mems_config() which is called from update_nodemask()
or cpuset_hotplug_update_tasks() with both cpu hotplug lock and
cpuset_mutex held. Deadlock can happen with a pending hotplug event that
tries to acquire the cpu hotplug write lock which will block further
cpus_read_lock() attempt from check_insane_mems_config(). Fix that by
switching to use static_branch_enable_cpuslocked().
Fixes: d74b27d63a ("cgroup/cpuset: Change cpuset_rwsem and hotplug lock order")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Avoid excessive vzalloc/vfree calls when patching instructions in
do_misc_fixups(). bpf_patch_insn_data() uses vzalloc to allocate new
memory for env->insn_aux_data for each patch as follows:
struct bpf_prog *bpf_patch_insn_data(env, ...)
{
...
new_data = vzalloc(... O(program size) ...);
...
adjust_insn_aux_data(env, new_data, ...);
...
}
void adjust_insn_aux_data(env, new_data, ...)
{
...
memcpy(new_data, env->insn_aux_data);
vfree(env->insn_aux_data);
env->insn_aux_data = new_data;
...
}
The vzalloc/vfree pair is hot in perf report collected for e.g.
pyperf180 test case. It can be replaced with a call to vrealloc in
order to reduce the number of actual memory allocations.
This is a stop-gap solution, as bpf_patch_insn_data is still hot in
the profile. More comprehansive solutions had been discussed before
e.g. as in [1].
[1] https://lore.kernel.org/bpf/CAEf4BzY_E8MSL4mD0UPuuiDcbJhh9e2xQo2=5w+ppRWWiYSGvQ@mail.gmail.com/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20250807010205.3210608-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Parameter 'env' is not used by is_reg64() and insn_has_def32()
functions. Remove the parameter to make it clear that neither function
depends on 'env' state, e.g. env->insn_aux_data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250807010205.3210608-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
takedown_cpu() has a comment about "all preempt/rcu users must observe
!cpu_active()" which is kind of meaningless in this function. This
comment was originally introduced by commit 6acce3ef84 ("sched: Remove
get_online_cpus() usage") when _cpu_down() was setting cpu_active_mask
and synchronize_rcu()/synchronize_sched() were added after that.
Later commit 40190a78f8 ("sched/hotplug: Convert cpu_[in]active
notifiers to state machine") added a new CPUHP_AP_ACTIVE hotplug
state to set/clear cpu_active_mask. The following commit b2454caa89
("sched/hotplug: Move sync_rcu to be with set_cpu_active(false)")
move the synchronize_*() calls to sched_cpu_deactivate() associated
with the new hotplug state, but left the comment behind.
Remove this comment as it is no longer relevant in takedown_cpu().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250729191232.664931-1-longman@redhat.com
Add bpf_struct_ops_id() to enable struct_ops implementors to use
struct_ops map id as the unique id of a struct_ops in their subsystem.
A subsystem that wishes to create a mapping between id and struct_ops
instance pointer can update the mapping accordingly during
bpf_struct_ops::reg(), unreg(), and update().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250806162540.681679-2-ameryhung@gmail.com
irq_shutdown_and_deactivate() is normally called with the descriptor lock
held, and interrupts disabled. Nested a few levels down, it grabs the
global irq_resend_lock. Lockdep rightfully complains when interrupts are
not disabled:
CPU0 CPU1
---- ----
lock(irq_resend_lock);
local_irq_disable();
lock(&irq_desc_lock_class);
lock(irq_resend_lock);
<Interrupt>
lock(&irq_desc_lock_class);
...
_raw_spin_lock+0x2b/0x40
clear_irq_resend+0x14/0x70
irq_shutdown_and_deactivate+0x29/0x80
irq_shutdown_depth_test+0x1ce/0x600
kunit_try_run_case+0x90/0x120
Grab the descriptor lock and disable interrupts, to resolve the
problem.
Fixes: 66067c3c8a ("genirq: Add kunit tests for depth counts")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/aJJONEIoIiTSDMqc@google.com
Closes: https://lore.kernel.org/lkml/31a761e4-8f81-40cf-aaf5-d220ba11911c@roeck-us.net/
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership
-----BEGIN PGP SIGNATURE-----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=MtyJ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which causes
perf_mmap_close() to ignore the unmap or unmap the wrong buffer.
- Several internal issues of perf_mmap(), which can cause reference count
leaks in the perf mmap, corrupt accounting or cause leaks in perf
drivers.
The main fix is to prevent VMA splits by implementing the [may_]split()
callback for vm operations. The other issues are addressed by rearranging
code, early returns on failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that requires
larger refactoring of the code and will be done once these fixes are
upstream.
-----BEGIN PGP SIGNATURE-----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=B9L/
-----END PGP SIGNATURE-----
Merge tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull perf fixes from Thomas Gleixner:
"Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which
causes perf_mmap_close() to ignore the unmap or unmap the wrong
buffer.
- Several internal issues of perf_mmap(), which can cause reference
count leaks in the perf mmap, corrupt accounting or cause leaks in
perf drivers.
The main fix is to prevent VMA splits by implementing the
[may_]split() callback for vm operations.
The other issues are addressed by rearranging code, early returns on
failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that
requires larger refactoring of the code and will be done once these
fixes are upstream"
* tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git:
selftests/perf_events: Add a mmap() correctness test
perf/core: Prevent VMA split of buffer mappings
perf/core: Handle buffer mapping fail correctly in perf_mmap()
perf/core: Exit early on perf_mmap() fail
perf/core: Don't leak AUX buffer refcount on allocation failure
perf/core: Preserve AUX buffer allocation failure result
Commit 86cdd2fdc4 ("kheaders: make headers archive reproducible")
introduced a number of options specific to GNU tar to the `tar`
invocation in `gen_kheaders.sh` script. This causes the script to fail
to work on systems where `tar` is not GNU tar. This can occur e.g.
on recent Gentoo Linux installations that support using bsdtar from
libarchive instead.
Add a `TAR` make variable to make it possible to override the tar
executable used, e.g. by specifying:
make TAR=gtar
Link: https://bugs.gentoo.org/884061
Reported-by: Sam James <sam@gentoo.org>
Tested-by: Sam James <sam@gentoo.org>
Co-developed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled. The
calling code just cleans up the VMA and does not invoke perf_mmap_close().
This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().
Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.
perf_mmap_close() undoes the reference counts and eventually frees buffers.
Fixes: b709eb872e ("perf: map pages in advance")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec67 ("perf: Add pmu callbacks to track event mapping and unmapping")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
A recent overhaul sets the return value to 0 unconditionally after the
allocations, which causes reference count leaks and corrupts the user->vm
accounting.
Preserve the AUX buffer allocation failure return value, so that the
subsequent code works correctly.
Fixes: 0983593f32 ("perf/core: Lift event->mmap_mutex in perf_mmap()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
- The 4 patch series "mseal cleanups" from Lorenzo Stoakes erforms some
mseal cleaning with no intended functional change.
- The 3 patch series "Optimizations for khugepaged" from David
Hildenbrand improves khugepaged throughput by batching PTE operations
for large folios. This gain is mainly for arm64.
- The 8 patch series "x86: enable EXECMEM_ROX_CACHE for ftrace and
kprobes" from Mike Rapoport provides a bugfix, additional debug code and
cleanups to the execmem code.
- The 7 patch series "mm/shmem, swap: bugfix and improvement of mTHP
swap in" from Kairui Song provides bugfixes, cleanups and performance
improvememnts to the mTHP swapin code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+6HQAKCRDdBJ7gKXxA
jv7lAQCAKE5dUhdZ0pOYbhBKTlDapQh2KqHrlV3QFcxXgknEoQD/c3gG01rY3fLh
Cnf5l9+cdyfKxFniO48sUPx6IpriRg8=
=HT5/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
-----BEGIN PGP SIGNATURE-----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=Mocd
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
With the seqcount moved out of the group into a global psi_seq,
re-initializing the seqcount on group creation is causing seqcount
corruption.
Fixes: 570c8efd5e ("sched/psi: Optimize psi_group_change() cpu_clock() usage")
Reported-by: Chris Mason <clm@meta.com>
Suggested-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer is
already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for
these functions so that their use cases can be simplified and not need to
use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using guard()
and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6 argument
registers and then use BTF to format them for human consumption when the
trace file is read. There's several arguments that are "unsigned long" and
even "unsigned int" that are either and address or a mask. It is easier to
understand if they were printed using hexadecimal instead of decimal.
The old method just printed all non-pointer values as signed integers,
which made it even worse for unsigned integers.
For instance, instead of:
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Show:
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaI9pOBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkhoAQD+moa8M+WWUS9T9utwREytolfyNKEO
dW0dPVzquX3L6gEAnc7zNla4QZJsdU1bHyhpDTn/Zhu11aMrzoxcBcdrSwI=
=x79z
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer
is already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard()
for these functions so that their use cases can be simplified and not
need to use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using
guard() and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6
argument registers and then use BTF to format them for human
consumption when the trace file is read. There are several arguments
that are "unsigned long" and even "unsigned int" that are either and
address or a mask. It is easier to understand if they were printed
using hexadecimal instead of decimal. The old method just printed all
non-pointer values as signed integers, which made it even worse for
unsigned integers.
For instance, instead of:
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
show:
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs"
* tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have unsigned int function args displayed as hexadecimal
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
tracing: Use __free(kfree) in trace.c to remove gotos
tracing: Add guard() around locks and mutexes in trace.c
tracing: Add guard(ring_buffer_nest)
tracing: Remove unneeded goto out logic
to use the module data structures in combination with the already no-op stub
module functions, even when support for modules is disabled in the kernel
configuration. This change follows the kernel's coding style for conditional
compilation and allows kunit code to drop all CONFIG_MODULES ifdefs, which is
also part of the changes. This should allow others part of the kernel to do the
same cleanup.
Note that this had a conflict with sysctl changes [1] but should be fixed now as I
rebased on top.
The remaining changes include a fix for module name length handling which could
potentially lead to the removal of an incorrect module, and various cleanups.
The module name fix and related cleanup has been in linux-next since Thursday
(July 31) while the rest of the changes for a bit more than 3 weeks.
Note that this currently has conflicts in next with kbuild's tree [2].
Link: https://lore.kernel.org/all/20250714175916.774e6d79@canb.auug.org.au/ [1]
Link: https://lore.kernel.org/all/20250801132941.6815d93d@canb.auug.org.au/ [2]
-----BEGIN PGP SIGNATURE-----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=4bGB
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"This is a small set of changes for modules, primarily to extend module
users to use the module data structures in combination with the
already no-op stub module functions, even when support for modules is
disabled in the kernel configuration. This change follows the kernel's
coding style for conditional compilation and allows kunit code to drop
all CONFIG_MODULES ifdefs, which is also part of the changes. This
should allow others part of the kernel to do the same cleanup.
The remaining changes include a fix for module name length handling
which could potentially lead to the removal of an incorrect module,
and various cleanups"
* tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
module: Restore the moduleparam prefix length check
module: Remove unnecessary +1 from last_unloaded_module::name size
module: Prevent silent truncation of module name in delete_module(2)
kunit: test: Drop CONFIG_MODULE ifdeffery
module: make structure definitions always visible
module: move 'struct module_use' to internal.h
Some callers of execmem_alloc() require the memory to be temporarily
writable even when it is allocated from ROX cache. These callers use
execemem_make_temp_rw() right after the call to execmem_alloc().
Wrap this sequence in execmem_alloc_rw() API.
Link: https://lkml.kernel.org/r/20250713071730.4117334-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enhance the debugging information in check_mm() by including the process
name and PID when reporting bad rss-counter states. This helps identify
which process is associated with the memory accounting issue.
Link: https://lkml.kernel.org/r/20250723100901.1909683-1-liuqiye2025@163.com
Signed-off-by: Xuanye Liu <liuqiye2025@163.com>
Acked-by: SeongJae Park <sj@kernel.org>
Cc: Ben Segall <bsegall@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use atomic_long_try_cmpxchg() instead of
atomic_long_cmpxchg (*ptr, old, new) == old in atomic_long_inc_below().
x86 CMPXCHG instruction returns success in ZF flag, so this change saves
a compare after cmpxchg (and related move instruction in front of cmpxchg).
Also, atomic_long_try_cmpxchg implicitly assigns old *ptr value to "old"
when cmpxchg fails, enabling further code simplifications.
No functional change intended.
Link: https://lkml.kernel.org/r/20250721174610.28361-2-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: MengEn Sun <mengensun@tencent.com>
Cc: "Thomas Weißschuh" <linux@weissschuh.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The type of u argument of atomic_long_inc_below() should be long to avoid
unwanted truncation to int.
The patch fixes the wrong argument type of an internal function to
prevent unwanted argument truncation. It fixes an internal locking
primitive; it should not have any direct effect on userspace.
Mark said
: AFAICT there's no problem in practice because atomic_long_inc_below()
: is only used by inc_ucount(), and it looks like the value is
: constrained between 0 and INT_MAX.
:
: In inc_ucount() the limit value is taken from
: user_namespace::ucount_max[], and AFAICT that's only written by
: sysctls, to the table setup by setup_userns_sysctls(), where
: UCOUNT_ENTRY() limits the value between 0 and INT_MAX.
:
: This is certainly a cleanup, but there might be no functional issue in
: practice as above.
Link: https://lkml.kernel.org/r/20250721174610.28361-1-ubizjak@gmail.com
Fixes: f9c82a4ea8 ("Increase size of ucounts to atomic_long_t")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: MengEn Sun <mengensun@tencent.com>
Cc: "Thomas Weißschuh" <linux@weissschuh.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When booting a new kernel with kexec_file, the kernel picks a target
location that the kernel should live at, then allocates random pages,
checks whether any of those patches magically happens to coincide with a
target address range and if so, uses them for that range.
For every page allocated this way, it then creates a page list that the
relocation code - code that executes while all CPUs are off and we are
just about to jump into the new kernel - copies to their final memory
location. We can not put them there before, because chances are pretty
good that at least some page in the target range is already in use by the
currently running Linux environment. Copying is happening from a single
CPU at RAM rate, which takes around 4-50 ms per 100 MiB.
All of this is inefficient and error prone.
To successfully kexec, we need to quiesce all devices of the outgoing
kernel so they don't scribble over the new kernel's memory. We have seen
cases where that does not happen properly (*cough* GIC *cough*) and hence
the new kernel was corrupted. This started a month long journey to root
cause failing kexecs to eventually see memory corruption, because the new
kernel was corrupted severely enough that it could not emit output to tell
us about the fact that it was corrupted. By allocating memory for the
next kernel from a memory range that is guaranteed scribbling free, we can
boot the next kernel up to a point where it is at least able to detect
corruption and maybe even stop it before it becomes severe. This
increases the chance for successful kexecs.
Since kexec got introduced, Linux has gained the CMA framework which can
perform physically contiguous memory mappings, while keeping that memory
available for movable memory when it is not needed for contiguous
allocations. The default CMA allocator is for DMA allocations.
This patch adds logic to the kexec file loader to attempt to place the
target payload at a location allocated from CMA. If successful, it uses
that memory range directly instead of creating copy instructions during
the hot phase. To ensure that there is a safety net in case anything goes
wrong with the CMA allocation, it also adds a flag for user space to force
disable CMA allocations.
Using CMA allocations has two advantages:
1) Faster by 4-50 ms per 100 MiB. There is no more need to copy in the
hot phase.
2) More robust. Even if by accident some page is still in use for DMA,
the new kernel image will be safe from that access because it resides
in a memory region that is considered allocated in the old kernel and
has a chance to reinitialize that component.
Link: https://lkml.kernel.org/r/20250610085327.51817-1-graf@amazon.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Zhongkun He <hezhongkun.hzk@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
env->scc_info array contains references to bpf_scc_info objects
allocated lazily in verifier.c:scc_visit_alloc().
env->scc_cnt was supposed to track env->scc_info array size
in order to free referenced objects in verifier.c:free_states().
Fix initialization of env->scc_cnt that was omitted in
verifier.c:compute_scc().
To reproduce the bug:
- build with CONFIG_DEBUG_KMEMLEAK
- boot and load bpf program with loops, e.g.:
./veristat -q pyperf180.bpf.o
- initiate memleak scan and check results:
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
Fixes: c9e31900b5 ("bpf: propagate read/precision marks over state graph backedges")
Reported-by: Jens Axboe <axboe@kernel.dk>
Closes: https://lore.kernel.org/bpf/CAADnVQKXUWg9uRCPD5ebRXwN4dmBCRUFFM7kN=GxymYz3zU25A@mail.gmail.com/T/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250801232330.1800436-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Futex hash allocations are done in mm_init() and the cleanup happens in
__mmput(). That works most of the time, but there are mm instances which
are instantiated via mm_alloc() and freed via mmdrop(), which causes the
futex hash to be leaked.
Move the cleanup to __mmdrop().
Fixes: 56180dd20c ("futex: Use RCU-based per-CPU reference counting instead of rcuref_t")
Reported-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/all/87ldo5ihu0.ffs@tglx
Closes: https://lore.kernel.org/all/0c8cc83bb73abf080faf584f319008b67d0931db.camel@linaro.org
-----BEGIN PGP SIGNATURE-----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=XLHS
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix kCFI failures in JITed BPF code on arm64 (Sami Tolvanen, Puranjay
Mohan, Mark Rutland, Maxwell Bland)
- Disallow tail calls between BPF programs that use different cgroup
local storage maps to prevent out-of-bounds access (Daniel Borkmann)
- Fix unaligned access in flow_dissector and netfilter BPF programs
(Paul Chaignon)
- Avoid possible use of uninitialized mod_len in libbpf (Achill
Gilgenast)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test for unaligned flow_dissector ctx access
bpf: Improve ctx access verifier error message
bpf: Check netfilter ctx accesses are aligned
bpf: Check flow_dissector ctx accesses are aligned
arm64/cfi,bpf: Support kCFI + BPF on arm64
cfi: Move BPF CFI types and helpers to generic code
cfi: add C CFI type macro
libbpf: Avoid possible use of uninitialized mod_len
bpf: Fix oob access in cgroup local storage
bpf: Move cgroup iterator helpers to bpf.h
bpf: Move bpf map owner out of common struct
bpf: Add cookie object to bpf maps
Most function arguments that are passed in as unsigned int or unsigned
long are better displayed as hexadecimal than normal integer. For example,
the functions:
static void __create_object(unsigned long ptr, size_t size,
int min_count, gfp_t gfp, unsigned int objflags);
static bool stack_access_ok(struct unwind_state *state, unsigned long _addr,
size_t len);
void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
Show up in the trace as:
__create_object(ptr=-131387050520576, size=4096, min_count=1, gfp=3264, objflags=0) <-kmem_cache_alloc_noprof
stack_access_ok(state=0xffffc9000233fc98, _addr=-60473102566256, len=8) <-unwind_next_frame
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
Instead, by displaying unsigned as hexadecimal, they look more like this:
__create_object(ptr=0xffff8881028d2080, size=0x280, min_count=1, gfp=0x82820, objflags=0x0) <-kmem_cache_alloc_node_noprof
stack_access_ok(state=0xffffc90000003938, _addr=0xffffc90000003930, len=0x8) <-unwind_next_frame
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs
Which is much easier to understand as most unsigned longs are usually just
pointers. Even the "unsigned int cnt" in __local_bh_disable_ip() looks
better as hexadecimal as a lot of flags are passed as unsigned.
Changes since v2: https://lore.kernel.org/20250801111453.01502861@gandalf.local.home
- Use btf_int_encoding() instead of open coding it (Martin KaFai Lau)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/20250801165601.7770d65c@gandalf.local.home
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
vhost can now support legacy threading
if enabled in Kconfig
vsock memory allocation strategies for
large buffers have been improved,
reducing pressure on kmalloc
vhost now supports the in-order feature
guest bits missed the merge window
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmiMvQEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpgr8IAKUrIjqqTYXLkbCWn6tK8T+LxZ6LkMkyHA1v
AJ+y5fKDeLsT5QpusD1XRjXJVqXBwQEsTN0pNVuhWHlcCpUeOFEHuJaf/QMncbc3
deFlUfMa3ihniUxBuyhojlWURsf94uTC906lCFXlIsfSKH2CW6/SjKvqR0SH5PhN
5WaqRYiSFFwDlyG2Ul4e5temP/er2KuZfYyvcYCU8VdSEp6bjvqCHd9ztFIVuByp
fFWsrHce6IqR8ixOOzavEjzfd8WAN3LGzXntj5KEaX3fZ6HxCZCMv+rNVqvJmLps
cSrTgIUo60nCiZb8klUCS1YTEEvmdmJg3UmmddIpIhcsCYJSbOU=
=2dxm
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vhost can now support legacy threading if enabled in Kconfig
- vsock memory allocation strategies for large buffers have been
improved, reducing pressure on kmalloc
- vhost now supports the in-order feature. guest bits missed the merge
window.
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits)
vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
vsock/virtio: Rename virtio_vsock_skb_rx_put()
vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
vsock/virtio: Move SKB allocation lower-bound check to callers
vsock/virtio: Rename virtio_vsock_alloc_skb()
vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
vsock/virtio: Validate length in packet header before skb_put()
vhost/vsock: Avoid allocating arbitrarily-sized SKBs
vhost_net: basic in_order support
vhost: basic in order support
vhost: fail early when __vhost_add_used() fails
vhost: Reintroduce kthread API and add mode selection
vdpa: Fix IDR memory leak in VDUSE module exit
vdpa/mlx5: Fix release of uninitialized resources on error path
vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit
virtio: virtio_dma_buf: fix missing parameter documentation
vhost: Fix typos
vhost: vringh: Remove unused functions
vhost: vringh: Remove unused iotlb functions
...
-----BEGIN PGP SIGNATURE-----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=ipv3
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
The function ring_buffer_write() has a goto out to only do a
preempt_enable_notrace(). This can be replaced by a guard.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203858.205479143@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's a couple of locations that have goto out in trace.c for the only
purpose of freeing a variable that was allocated. These can be replaced
with __free(kfree).
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203858.040892777@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's several locations in trace.c that can be simplified by using
guards around raw_spin_lock_irqsave, mutexes and preempt disabling.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203857.879085376@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Some calls to the tracing ring buffer can happen when the ring buffer is
already being written to by the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard() for
these functions so that their use cases can be simplified and not need to
use goto for the release.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203857.710501021@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Several places in the trace.c file there's a goto out where the out is
simply a return. There's no reason to jump to the out label if it's not
doing any more logic but simply returning from the function.
Replace the goto outs with a return and remove the out labels.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250801203857.538726745@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen in two
different locations has lead to various issues and inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for this
single user.
It's been over 10 years. Tooling and scripts should start replacing the
debugfs location with the tracefs one. The reason tracefs was created in the
first place was to allow access to the tracing facilities without the need
to configure debugfs into the kernel. Using tracefs should now be more
robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED
which is default y, so that the kernel is still built with the automount.
This config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the following
printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number of
events within an event system. Freeing them from softirq context can
potentially cause undesired latency. Use the RCU workqueue to free them
instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time ago with
the idea of "making them visible", but that's not what memory barriers are
for. They are to synchronize access between different variables. There was
no synchronization here making them pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y and
PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with the
following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another probe was
enabled (kprobe, fprobe, uprobe, etc). The eprobes had no config option
of their own. Add one as they should be a separate entity.
It's default y to keep with the old kernels but still has dependencies on
TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to describe
them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment above
pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling of
trace events was first introduced. But there was a bug with this approach
as it only worked for a single instance. When multiple users required soft
disabling and disabling the code was changed to have a ref count. The
SOFT_MODE flag is now set iff the ref count is non zero. This is redundant
and just reading the ref count is good enough.
- Fix typo in comment
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIt5ZRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvriAPsEbOEgMrPF1Tdj1mHLVajYTxI8ft5J
aX5bfM2cDDRVcgEA57JHOXp4d05dj555/hgAUuCWuFp/E0Anp45EnFTedgQ=
=wKZW
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Deprecate auto-mounting tracefs to /sys/kernel/debug/tracing
When tracefs was first introduced back in 2014, the directory
/sys/kernel/tracing was added and is the designated location to mount
tracefs. To keep backward compatibility, tracefs was auto-mounted in
/sys/kernel/debug/tracing as well.
All distros now mount tracefs on /sys/kernel/tracing. Having it seen
in two different locations has lead to various issues and
inconsistencies.
The VFS folks have to also maintain debugfs_create_automount() for
this single user.
It's been over 10 years. Tooling and scripts should start replacing
the debugfs location with the tracefs one. The reason tracefs was
created in the first place was to allow access to the tracing
facilities without the need to configure debugfs into the kernel.
Using tracefs should now be more robust.
A new config is created: CONFIG_TRACEFS_AUTOMOUNT_DEPRECATED which is
default y, so that the kernel is still built with the automount. This
config allows those that want to remove the automount from debugfs to
do so.
When tracefs is accessed from /sys/kernel/debug/tracing, the
following printk is triggerd:
pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");
This gives users another 5 years to fix their scripts.
- Use queue_rcu_work() instead of call_rcu() for freeing event filters
The number of filters to be free can be many depending on the number
of events within an event system. Freeing them from softirq context
can potentially cause undesired latency. Use the RCU workqueue to
free them instead.
- Remove pointless memory barriers in latency code
Memory barriers were added to some of the latency code a long time
ago with the idea of "making them visible", but that's not what
memory barriers are for. They are to synchronize access between
different variables. There was no synchronization here making them
pointless.
- Remove "__attribute__()" from the type field of event format
When LLVM is used to compile the kernel with CONFIG_DEBUG_INFO_BTF=y
and PAHOLE_HAS_BTF_TAG=y, some of the format fields get expanded with
the following:
field:const char * filename; offset:24; size:8; signed:0;
Turns into:
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
This confuses parsers. Add code to strip these tags from the strings.
- Add eprobe config option CONFIG_EPROBE_EVENTS
Eprobes were added back in 5.15 but were only enabled when another
probe was enabled (kprobe, fprobe, uprobe, etc). The eprobes had no
config option of their own. Add one as they should be a separate
entity.
It's default y to keep with the old kernels but still has
dependencies on TRACING and HAVE_REGS_AND_STACK_ACCESS_API.
- Add eprobe documentation
When eprobes were added back in 5.15 no documentation was added to
describe them. This needs to be rectified.
- Replace open coded cpumask_next_wrap() in move_to_next_cpu()
- Have preemptirq_delay_run() use off-stack CPU mask
- Remove obsolete comment about pelt_cfs event
DECLARE_TRACE() appends "_tp" to trace events now, but the comment
above pelt_cfs still mentioned appending it manually.
- Remove EVENT_FILE_FL_SOFT_MODE flag
The SOFT_MODE flag was required when the soft enabling and disabling
of trace events was first introduced. But there was a bug with this
approach as it only worked for a single instance. When multiple users
required soft disabling and disabling the code was changed to have a
ref count. The SOFT_MODE flag is now set iff the ref count is non
zero. This is redundant and just reading the ref count is good
enough.
- Fix typo in comment
* tag 'trace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Add documentation about eprobes
tracing: Have eprobes have their own config option
tracing: Remove "__attribute__()" from the type field of event format
tracing: Deprecate auto-mounting tracefs in debugfs
tracing: Fix comment in trace_module_remove_events()
tracing: Remove EVENT_FILE_FL_SOFT_MODE flag
tracing: Remove pointless memory barriers
tracing/sched: Remove obsolete comment on suffixes
kernel: trace: preemptirq_delay_test: use offstack cpu mask
tracing: Use queue_rcu_work() to free filters
tracing: Replace opencoded cpumask_next_wrap() in move_to_next_cpu()
This is the core infrastructure for the deferred unwinder that is required
for sframes[1]. Several other patch series is based on this work although
those patch series are not dependent on each other. In order to simplify the
development, having this core series upstream will allow the other series to
be worked on in parallel. The other series are:
- The two patches to implement x86:
https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/
- The s390 work:
https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/
- The perf work:
https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/
- The ftrace work:
https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/
- The sframe work:
https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/
And more is on the way.
The core infrastructure adds the following in kernel APIs:
- int unwind_user_faultable(struct unwind_stacktrace *trace);
Performs a user space stack trace that may fault user pages in.
- int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func);
Allows a tracer to register with the unwind deferred infrastructure.
- int unwind_deferred_request(struct unwind_work *work, u64 *cookie);
Used when a tracer request a deferred trace. Can be called from interrupt
or NMI context.
- void unwind_deferred_cancel(struct unwind_work *work);
Called by a tracer to unregister from the deferred unwind infrastructure.
- void unwind_deferred_task_exit(struct task_struct *task);
Called by task exit code to flush any pending unwind requests.
- void unwind_task_init(struct task_struct *task);
Called by do_fork() to initialize the task struct for the deferred
unwinder.
- void unwind_task_free(struct task_struct *task);
Called by do_exit() to free up any resources used by the deferred
unwinder.
None of the above is actually compiled unless an architecture enables it,
which none currently do.
[1] https://sourceware.org/binutils/wiki/sframe
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIt9IhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqqzAQCMT/6qmSq7O746JF0MuGC6fTZnSbAc
XGz4JigEqLTRewEA2kaJmD7PBsSRzFdiK2gvyKn95l+PZyWtE9MjTsqeSAc=
=Lsbm
-----END PGP SIGNATURE-----
Merge tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull initial deferred unwind infrastructure from Steven Rostedt:
"This is the core infrastructure for the deferred unwinder that is
required for sframes[1]. Several other patch series are based on this
work although those patch series are not dependent on each other. In
order to simplify the development, having this core series upstream
will allow the other series to be worked on in parallel. The other
series are:
- The two patches to implement x86 support [2] [3]
- The s390 work [4]
- The perf work [5]
- The ftrace work [6]
- The sframe work [7]
And more is on the way.
The core infrastructure adds the following in kernel APIs:
- int unwind_user_faultable(struct unwind_stacktrace *trace);
Performs a user space stack trace that may fault user pages in.
- int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func);
Allows a tracer to register with the unwind deferred
infrastructure.
- int unwind_deferred_request(struct unwind_work *work, u64 *cookie);
Used when a tracer request a deferred trace. Can be called from
interrupt or NMI context.
- void unwind_deferred_cancel(struct unwind_work *work);
Called by a tracer to unregister from the deferred unwind
infrastructure.
- void unwind_deferred_task_exit(struct task_struct *task);
Called by task exit code to flush any pending unwind requests.
- void unwind_task_init(struct task_struct *task);
Called by do_fork() to initialize the task struct for the
deferred unwinder.
- void unwind_task_free(struct task_struct *task);
Called by do_exit() to free up any resources used by the
deferred unwinder.
None of the above is actually compiled unless an architecture enables it,
which none currently do"
Link: https://sourceware.org/binutils/wiki/sframe [1]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ [2]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ [3]
Link: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ [4]
Link: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ [5]
Link: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ [6]
Link: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ [7]
* tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
unwind: Finish up unwind when a task exits
unwind deferred: Use SRCU unwind_deferred_task_work()
unwind: Add USED bit to only have one conditional on way back to user space
unwind deferred: Add unwind_completed mask to stop spurious callbacks
unwind deferred: Use bitmask to determine which callbacks to call
unwind_user/deferred: Make unwind deferral requests NMI-safe
unwind_user/deferred: Add deferred unwinding interface
unwind_user/deferred: Add unwind cache
unwind_user/deferred: Add unwind_user_faultable()
unwind_user: Add user space unwinding API with frame pointer support
We've already had two "error during ctx access conversion" warnings
triggered by syzkaller. Let's improve the error message by dumping the
cnt variable so that we can more easily differentiate between the
different error cases.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/cc94316c30dd76fae4a75a664b61a2dbfe68e205.1754039605.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cocci warning:
./kernel/vhost_task.c:148:9-16: WARNING: ERR_CAST can be used with tsk
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)).
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Message-Id: <1a8499a5da53e4f72cf21aca044ae4b26db8b2ad.1749020055.git.xiaopei01@kylinos.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of duplicating the same code for each architecture, move
the CFI type hash variables for BPF function types and related
helper functions to generic CFI code, and allow architectures to
override the function definitions if needed.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250801001004.1859976-7-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Add support for cgroup "cpu.max" interface.
- Code organization cleanup so that ext_idle.c doesn't depend on the
source-file-inclusion build method of sched/.
- Drop UP paths in accordance with sched core changes.
- Documentation and other misc changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaIqnxg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGUh5AQC6YM7ggRPYRmy28m5B0nubpKtCHqPOAHSd/QbY
MCiThgD+JuE9ewg3wYO/jvJx3NyIRB1McMnAaG59hf6R0Plh5Qo=
=TeLF
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Add support for cgroup "cpu.max" interface
- Code organization cleanup so that ext_idle.c doesn't depend on the
source-file-inclusion build method of sched/
- Drop UP paths in accordance with sched core changes
- Documentation and other misc changes
* tag 'sched_ext-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix scx_bpf_reenqueue_local() reference
sched_ext: Drop kfuncs marked for removal in 6.15
sched_ext, rcu: Eject BPF scheduler on RCU CPU stall panic
kernel/sched/ext.c: fix typo "occured" -> "occurred" in comments
sched_ext: Add support for cgroup bandwidth control interface
sched_ext, sched/core: Factor out struct scx_task_group
sched_ext: Return NULL in llc_span
sched_ext: Always use SMP versions in kernel/sched/ext_idle.h
sched_ext: Always use SMP versions in kernel/sched/ext_idle.c
sched_ext: Always use SMP versions in kernel/sched/ext.h
sched_ext: Always use SMP versions in kernel/sched/ext.c
sched_ext: Documentation: Clarify time slice handling in task lifecycle
sched_ext: Make scx_locked_rq() inline
sched_ext: Make scx_rq_bypassing() inline
sched_ext: idle: Make local functions static in ext_idle.c
sched_ext: idle: Remove unnecessary ifdef in scx_bpf_cpu_node()
- Allow css_rstat_updated() in NMI context to enable memory accounting for
allocations in NMI context.
- /proc/cgroups doesn't contain useful information for cgroup2 and was
updated to only show v1 controllers. This unfortunately broke something in
the wild. Add an option to bring back the old behavior to ease transition.
- selftest updates and other cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaIqlxQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcTMAQDUlGf50ATWB9hDU7zUG4lVn8s8n8/+x8QFGHn4
e4NERQD9FpU/jLN+cwGgspKo+L9qpu/1g+t36cJLcOuEKKoaQwI=
=FLwx
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Allow css_rstat_updated() in NMI context to enable memory accounting
for allocations in NMI context.
- /proc/cgroups doesn't contain useful information for cgroup2 and was
updated to only show v1 controllers. This unfortunately broke
something in the wild. Add an option to bring back the old behavior
to ease transition.
- selftest updates and other cleanups.
* tag 'cgroup-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add compatibility option for content of /proc/cgroups
selftests/cgroup: fix cpu.max tests
cgroup: llist: avoid memory tears for llist_node
selftests: cgroup: Fix missing newline in test_zswap_writeback_one
selftests: cgroup: Allow longer timeout for kmem_dead_cgroups cleanup
memcg: cgroup: call css_rstat_updated irrespective of in_nmi()
cgroup: remove per-cpu per-subsystem locks
cgroup: make css_rstat_updated nmi safe
cgroup: support to enable nmi-safe css_rstat_updated
selftests: cgroup: Fix compilation on pre-cgroupns kernels
selftests: cgroup: Optionally set up v1 environment
selftests: cgroup: Add support for named v1 hierarchies in test_core
selftests: cgroup_util: Add helpers for testing named v1 hierarchies
Documentation: cgroup: add section explaining controller availability
cgroup: Drop sock_cgroup_classid() dummy implementation
- Prepare for defaulting to unbound workqueue. A separate branch was created
to ease pulling in from other trees but none of the conversions have
landed yet.
- Memory allocation profiling support added.
- Misc changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaIqiqg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGa5uAP90MhiDmUxrIXK9A80f0+S6ujIpGm6tYQAOHHsZ
s6gH3gD+PIsupQ6wF107+Z71ZFtMC2vkrKuTSGE88x5r3aWq+gw=
=j/gv
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Prepare for defaulting to unbound workqueue. A separate branch was
created to ease pulling in from other trees but none of the
conversions have landed yet
- Memory allocation profiling support added
- Misc changes
* tag 'wq-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Use atomic_try_cmpxchg_relaxed() in tryinc_node_nr_active()
workqueue: Remove unused work_on_cpu_safe
workqueue: Add new WQ_PERCPU flag
workqueue: Add system_percpu_wq and system_dfl_wq
workqueue: Basic memory allocation profiling support
workqueue: fix opencoded cpumask_next_and_wrap() in wq_select_unbound_cpu()
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
Lonial reported that an out-of-bounds access in cgroup local storage
can be crafted via tail calls. Given two programs each utilizing a
cgroup local storage with a different value size, and one program
doing a tail call into the other. The verifier will validate each of
the indivial programs just fine. However, in the runtime context
the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the
BPF program as well as any cgroup local storage flavor the program
uses. Helpers such as bpf_get_local_storage() pick this up from the
runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED)
ptr = &READ_ONCE(storage->buf)->data[0];
else
ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached
one, this means bpf_get_local_storage() will pick up the former
program's map, not its own. With mismatching sizes, this can result
in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of
storage_cookie[] to match on i) the exact maps from the original
program if the second program was using bpf_get_local_storage(), or
ii) allow the tail call combination if the second program was not
using any of the cgroup local storage maps.
Fixes: 7d9c342789 ("bpf: Make cgroup storages shared between programs on the same cgroup")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given this is only relevant for BPF tail call maps, it is adding up space
and penalizing other map types. We also need to extend this with further
objects to track / compare to. Therefore, lets move this out into a separate
structure and dynamically allocate it only for BPF tail call maps.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a cookie to BPF maps to uniquely identify BPF maps for the timespan
when the node is up. This is different to comparing a pointer or BPF map
id which could get rolled over and reused.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
API:
- Allow hash drivers without fallbacks (e.g., hardware key).
Algorithms:
- Add hmac hardware key support (phmac) on s390.
- Re-enable sha384 in FIPS mode.
- Disable sha1 in FIPS mode.
- Convert zstd to acomp.
Drivers:
- Lower priority of qat skcipher and aead.
- Convert aspeed to partial block API.
- Add iMX8QXP support in caam.
- Add rate limiting support for GEN6 devices in qat.
- Enable telemetry for GEN6 devices in qat.
- Implement full backlog mode for hisilicon/sec2.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmiHQXwACgkQxycdCkmx
i6f49A//dQtMg/nvlqForj3BTYKPtjpfZhGxOhda1Y01ts4nFLwM39HtNXGCa6no
e5L/taHdGd4loZoFa0H7Jz8Qn+I8F3YJLE1gDmN1zogzM6hG7KwFpJLy+PrusS3H
IwjUehPKNTK2XWmJCdxpsulmwBD+Y//DG3wpwGlkr+MMvlzoMkesvBSCwmXKh/rh
dn8efrHqL+3LBM6F4nM5zTwcKpLvp7V9arwAE6Zat95WN1X2puEk9L8vYG96hU9/
YmG79E6WIb4UBILJlYdfba+3tK0bZaU3iDHMLQVlAPgM8JvzF9THyFRlLRa586/P
rHo2xrgD1vPlMFXKhNI9p+D65zF/5Z0EKTfn1Z99z1kVzz3L71GOYlAvcAw1S9/j
dRAcfrs/7xEW1SI9j+jVYqZn5g/ClGF8MwEL2VYHzyxN3VPY7ELys4rk6Il29NQp
EVH8VfZS3XmdF1oiH51/ZDT4mfvQjn3v33ssdNpAFsZX2XIBj0d48JtTN/ynDfUB
SPS2pTa5FBJCOpRR/Pbct+eloyrVP4Lcy8/gwlKAEY0ZffBBPmd2wCujQf/SKcUH
e4b6hXAWe0gns/4VSnaker3YdG6o4uPWotZKvIiyKlkKGmJXHuSRK32odRO66+Bg
tlaUYOmRghmxgU9Sc6h9M6vkm5rBLMw4ccykmhGSvvudm9rLh6A=
=E8nj
-----END PGP SIGNATURE-----
Merge tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Allow hash drivers without fallbacks (e.g., hardware key)
Algorithms:
- Add hmac hardware key support (phmac) on s390
- Re-enable sha384 in FIPS mode
- Disable sha1 in FIPS mode
- Convert zstd to acomp
Drivers:
- Lower priority of qat skcipher and aead
- Convert aspeed to partial block API
- Add iMX8QXP support in caam
- Add rate limiting support for GEN6 devices in qat
- Enable telemetry for GEN6 devices in qat
- Implement full backlog mode for hisilicon/sec2"
* tag 'v6.17-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits)
crypto: keembay - Use min() to simplify ocs_create_linked_list_from_sg()
crypto: hisilicon/hpre - fix dma unmap sequence
crypto: qat - make adf_dev_autoreset() static
crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd
crypto: qat - refactor ring-related debug functions
crypto: qat - fix seq_file position update in adf_ring_next()
crypto: qat - fix DMA direction for compression on GEN2 devices
crypto: jitter - replace ARRAY_SIZE definition with header include
crypto: engine - remove {prepare,unprepare}_crypt_hardware callbacks
crypto: engine - remove request batching support
crypto: qat - flush misc workqueue during device shutdown
crypto: qat - enable rate limiting feature for GEN6 devices
crypto: qat - add compression slice count for rate limiting
crypto: qat - add get_svc_slice_cnt() in device data structure
crypto: qat - add adf_rl_get_num_svc_aes() in rate limiting
crypto: qat - relocate service related functions
crypto: qat - consolidate service enums
crypto: qat - add decompression service for rate limiting
crypto: qat - validate service in rate limiting sysfs api
crypto: hisilicon/sec2 - implement full backlog mode for sec
...
The dedicated helper is more verbose and efficient comparing to
cpumask_next() followed by cpumask_first().
Signed-off-by: "Yury Norov [NVIDIA]" <yury.norov@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
The current algorithm of picking a random CPU works OK for dense online
cpumask, but if cpumask is non-dense, the distribution of picked CPUs
is skewed.
For example, on 8-CPU board with CPUs 4-7 offlined, the probability of
selecting CPU 0 is 5/8. Accordingly, cpus 1, 2 and 3 are chosen with
probability 1/8 each. The proper algorithm should pick each online CPU
with probability 1/4.
Switch it to cpumask_random(), which has better statistical
characteristics.
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: John Stultz <jstultz@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Yury Norov [NVIDIA]" <yury.norov@gmail.com>
On do_exit() when a task is exiting, if a unwind is requested and the
deferred user stacktrace is deferred via the task_work, the task_work
callback is called after exit_mm() is called in do_exit(). This means that
the user stack trace will not be retrieved and an empty stack is created.
Instead, add a function unwind_deferred_task_exit() and call it just
before exit_mm() so that the unwinder can call the requested callbacks
with the user space stack.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182406.504259474@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of using the callback_mutex to protect the link list of callbacks
in unwind_deferred_task_work(), use SRCU instead. This gets called every
time a task exits that has to record a stack trace that was requested.
This can happen for many tasks on several CPUs at the same time. A mutex
is a bottleneck and can cause a bit of contention and slow down performance.
As the callbacks themselves are allowed to sleep, regular RCU cannot be
used to protect the list. Instead use SRCU, as that still allows the
callbacks to sleep and the list can be read without needing to hold the
callback_mutex.
Link: https://lore.kernel.org/all/ca9bd83a-6c80-4ee0-a83c-224b9d60b755@efficios.com/
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182406.331548065@kernel.org
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On the way back to user space, the function unwind_reset_info() is called
unconditionally (but always inlined). It currently has two conditionals.
One that checks the unwind_mask which is set whenever a deferred trace is
called and is used to know that the mask needs to be cleared. The other
checks if the cache has been allocated, and if so, it resets the
nr_entries so that the unwinder knows it needs to do the work to get a new
user space stack trace again (it only does it once per entering the
kernel).
Use one of the bits in the unwind mask as a "USED" bit that gets set
whenever a trace is created. This will make it possible to only check the
unwind_mask in the unwind_reset_info() to know if it needs to do work or
not and eliminates a conditional that happens every time the task goes
back to user space.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182406.155422551@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If there's more than one registered tracer to the unwind deferred
infrastructure, it is currently possible that one tracer could cause extra
callbacks to happen for another tracer if the former requests a deferred
stacktrace after the latter's callback was executed and before the task
went back to user space.
Here's an example of how this could occur:
[Task enters kernel]
tracer 1 request -> add cookie to its buffer
tracer 1 request -> add cookie to its buffer
<..>
[ task work executes ]
tracer 1 callback -> add trace + cookie to its buffer
[tracer 2 requests and triggers the task work again]
[ task work executes again ]
tracer 1 callback -> add trace + cookie to its buffer
tracer 2 callback -> add trace + cookie to its buffer
[Task exits back to user space]
This is because the bit for tracer 1 gets set in the task's unwind_mask
when it did its request and does not get cleared until the task returns
back to user space. But if another tracer were to request another deferred
stacktrace, then the next task work will executed all tracer's callbacks
that have their bits set in the task's unwind_mask.
To fix this issue, add another mask called unwind_completed and place it
into the task's info->cache structure. The cache structure is allocated
on the first occurrence of a deferred stacktrace and this unwind_completed
mask is not needed until then. It's better to have it in the cache than to
permanently waste space in the task_struct.
After a tracer's callback is executed, it's bit gets set in this
unwind_completed mask. When the task_work enters, it will AND the task's
unwind_mask with the inverse of the unwind_completed which will eliminate
any work that already had its callback executed since the task entered the
kernel.
When the task leaves the kernel, it will reset this unwind_completed mask
just like it resets the other values as it enters user space.
Link: https://lore.kernel.org/all/20250716142609.47f0e4a5@batman.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182405.989222722@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In order to know which registered callback requested a stacktrace for when
the task goes back to user space, add a bitmask to keep track of all
registered tracers. The bitmask is the size of long, which means that on a
32 bit machine, it can have at most 32 registered tracers, and on 64 bit,
it can have at most 64 registered tracers. This should not be an issue as
there should not be more than 10 (unless BPF can abuse this?).
When a tracer registers with unwind_deferred_init() it will get a bit
number assigned to it. When a tracer requests a stacktrace, it will have
its bit set within the task_struct. When the task returns back to user
space, it will call the callbacks for all the registered tracers where
their bits are set in the task's mask.
When a tracer is removed by the unwind_deferred_cancel() all current tasks
will clear the associated bit, just in case another tracer gets registered
immediately afterward and then gets their callback called unexpectedly.
To prevent live locks from happening if an event that happens between the
task_work and when the task goes back to user space, triggers the deferred
unwind, have the unwind_mask get cleared on exit to user space and not
after the callback is made.
Move the pending bit from a value on the task_struct to bit zero of the
unwind_mask (saves space on the task_struct). This will allow modifying
the pending bit along with the work bits atomically.
Instead of clearing a work's bit after its callback is called, it is
delayed until exit. If the work is requested again, the task_work is not
queued again and the request will be notified that the task has already been
called by returning a positive number (the same as if it was already
pending).
The pending bit is cleared before calling the callback functions but the
current work bits remain. If one of the called works registers again, it
will not trigger a task_work if its bit is still present in the task's
unwind_mask.
If a new work requests a deferred unwind, then it will set both the
pending bit and its own bit. Note this will also cause any work that was
previously queued and had their callback already executed to be executed
again. Future work will remove these spurious callbacks.
The use of atomic_long bit operations were suggested by Peter Zijlstra:
Link: https://lore.kernel.org/all/20250715102912.GQ1613200@noisy.programming.kicks-ass.net/
The unwind_mask could not be converted to atomic_long_t do to atomic_long
not having all the bit operations needed by unwind_mask. Instead it
follows other use cases in the kernel and just typecasts the unwind_mask
to atomic_long_t when using the two atomic_long functions.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182405.822789300@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make unwind_deferred_request() NMI-safe so tracers in NMI context can
call it and safely request a user space stacktrace when the task exits.
Note, this is only allowed for architectures that implement a safe
cmpxchg. If an architecture requests a deferred stack trace from NMI
context that does not support a safe NMI cmpxchg, it will get an -EINVAL
and trigger a warning. For those architectures, they would need another
method (perhaps an irqwork), to request a deferred user space stack trace.
That can be dealt with later if one of theses architectures require this
feature.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182405.657072238@kernel.org
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add an interface for scheduling task work to unwind the user space stack
before returning to user space. This solves several problems for its
callers:
- Ensure the unwind happens in task context even if the caller may be
running in interrupt context.
- Avoid duplicate unwinds, whether called multiple times by the same
caller or by different callers.
- Create a "context cookie" which allows trace post-processing to
correlate kernel unwinds/traces with the user unwind.
A concept of a "cookie" is created to detect when the stacktrace is the
same. A cookie is generated the first time a user space stacktrace is
requested after the task enters the kernel. As the stacktrace is saved on
the task_struct while the task is in the kernel, if another request comes
in, if the cookie is still the same, it will use the saved stacktrace,
and not have to regenerate one.
The cookie is passed to the caller on request, and when the stacktrace is
generated upon returning to user space, it calls the requester's callback
with the cookie as well as the stacktrace. The cookie is cleared
when it goes back to user space. Note, this currently adds another
conditional to the unwind_reset_info() path that is always called
returning to user space, but future changes will put this back to a single
conditional.
A global list is created and protected by a global mutex that holds
tracers that register with the unwind infrastructure. The number of
registered tracers will be limited in future changes. Each perf program or
ftrace instance will register its own descriptor to use for deferred
unwind stack traces.
Note, in the function unwind_deferred_task_work() that gets called when
returning to user space, it uses a global mutex for synchronization which
will cause a big bottleneck. This will be replaced by SRCU, but that
change adds some complex synchronization that deservers its own commit.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Jens Remus <jremus@linux.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182405.488066537@kernel.org
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cache the results of the unwind to ensure the unwind is only performed
once, even when called by multiple tracers.
The cache nr_entries gets cleared every time the task exits the kernel.
When a stacktrace is requested, nr_entries gets set to the number of
entries in the stacktrace. If another stacktrace is requested, if
nr_entries is not zero, then it contains the same stacktrace that would be
retrieved so it is not processed again and the entries is given to the
caller.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182405.319691167@kernel.org
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-By: Indu Bhagat <indu.bhagat@oracle.com>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use the MODULE_NAME_LEN definition in module_exists() to obtain the maximum
size of a module name, instead of using MAX_PARAM_PREFIX_LEN. The values
are the same but MODULE_NAME_LEN is more appropriate in this context.
MAX_PARAM_PREFIX_LEN was added in commit 730b69d225 ("module: check
kernel param length at compile time, not runtime") only to break a circular
dependency between module.h and moduleparam.h, and should mostly be limited
to use in moduleparam.h.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250630143535.267745-5-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
The variable last_unloaded_module::name tracks the name of the last
unloaded module. It is a string copy of module::name, which is
MODULE_NAME_LEN bytes in size and includes the NUL terminator. Therefore,
the size of last_unloaded_module::name can also be just MODULE_NAME_LEN,
without the need for an extra byte.
Fixes: e14af7eeb4 ("debug: track and print last unloaded module in the oops trace")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-3-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.
Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250630143535.267745-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
The struct was moved to the public header file in commit c8e21ced08
("module: fix kdb's illicit use of struct module_use.").
Back then the structure was used outside of the module core.
Nowadays this is not true anymore, so the structure can be made internal.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://lore.kernel.org/r/20250711-kunit-ifdef-modules-v2-1-39443decb1f8@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups.
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC,
PIC, and PIT emulation at compile time.
- Share device posted IRQ code between SVM and VMX and
harden it against bugs and runtime errors.
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1)
instead of O(n).
- For MMIO stale data mitigation, track whether or not a vCPU has access to
(host) MMIO based on whether the page tables have MMIO pfns mapped; using
VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are more or
less identical.
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps.
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently.
- Fix a user-triggerable WARN that syzkaller found by setting the vCPU
in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU
into VMX Root Mode (post-VMXON). Trying to detect every possible path
leading to architecturally forbidden states is hard and even risks
breaking userspace (if it goes from valid to valid state but passes
through invalid states), so just wait until KVM_RUN to detect that
the vCPU state isn't allowed.
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of
APERF/MPERF reads, so that a "properly" configured VM can access
APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed
on vCPU creation or saved/restored on suspend and resume, or preserved
over thread migration let alone VM migration) but can be useful whenever
you're interested in letting Linux guests see the effective physical CPU
frequency in /proc/cpuinfo.
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a "secure"
TSC, so kill two birds with one stone.
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list).
- Extract many of KVM's helpers for accessing architectural local APIC
state to common x86 so that they can be shared by guest-side code for
Secure AVIC.
- Various cleanups and fixes.
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests.
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent
L1 from running L2 with features that KVM doesn't support, e.g. BTF.
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel if the
nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty
much a static condition and therefore should never happen, but still).
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code.
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation.
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry.
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected by
erratum #1235, to allow (safely) enabling AVIC on such CPUs.
- Request GA Log interrupts if and only if the target vCPU is blocking,
i.e. only if KVM needs a notification in order to wake the vCPU.
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the
vCPU's CPUID model.
- Accept any SNP policy that is accepted by the firmware with respect to
SMT and single-socket restrictions. An incompatible policy doesn't put
the kernel at risk in any way, so there's no reason for KVM to care.
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache maintenance.
- When reclaiming memory from an SEV guest, only do cache flushes on CPUs
that have ever run a vCPU for the guest, i.e. don't flush the caches for
CPUs that can't possibly have cache lines with dirty, encrypted data.
Generic:
- Rework irqbypass to track/match producers and consumers via an xarray
instead of a linked list. Using a linked list leads to O(n^2) insertion
times, which is hugely problematic for use cases that create large
numbers of VMs. Such use cases typically don't actually use irqbypass,
but eliminating the pointless registration is a future problem to
solve as it likely requires new uAPI.
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *",
to avoid making a simple concept unnecessarily difficult to understand.
- Decouple device posted IRQs from VFIO device assignment, as binding a VM
to a VFIO group is not a requirement for enabling device posted IRQs.
- Clean up and document/comment the irqfd assignment code.
- Disallow binding multiple irqfds to an eventfd with a priority waiter,
i.e. ensure an eventfd is bound to at most one irqfd through the entire
host, and add a selftest to verify eventfd:irqfd bindings are globally
unique.
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions.
- Drop guest_memfd's .getattr() implementation as the VFS layer will call
generic_fillattr() if inode_operations.getattr is NULL.
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep KVM
in a tight loop indefinitely.
- Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking,
now that KVM no longer uses assigned_device_count as a heuristic for
either irqbypass usage or MDS mitigation.
Selftests:
- Fix a comment typo.
- Verify KVM is loaded when getting any KVM module param so that attempting
to run a selftest without kvm.ko loaded results in a SKIP message about
KVM not being loaded/enabled (versus some random parameter not existing).
- Skip tests that hit EACCES when attempting to access a file, and rpint
a "Root required?" help message. In most cases, the test just needs to
be run with elevated permissions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU
9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm
YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC
j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN
zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q
IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw==
=j2At
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on
hardware that previously advertised it unconditionally
- Map supporting endpoints with cacheable memory attributes on
systems with FEAT_S2FWB and DIC where KVM no longer needs to
perform cache maintenance on the address range
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the
guest hypervisor to inject external aborts into an L2 VM and take
traps of masked external aborts to the hypervisor
- Convert more system register sanitization to the config-driven
implementation
- Fixes to the visibility of EL2 registers, namely making VGICv3
system registers accessible through the VGIC device instead of the
ONE_REG vCPU ioctls
- Various cleanups and minor fixes
LoongArch:
- Add stat information for in-kernel irqchip
- Add tracepoints for CPUCFG and CSR emulation exits
- Enhance in-kernel irqchip emulation
- Various cleanups
RISC-V:
- Enable ring-based dirty memory tracking
- Improve perf kvm stat to report interrupt events
- Delegate illegal instruction trap to VS-mode
- MMU improvements related to upcoming nested virtualization
s390x
- Fixes
x86:
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O
APIC, PIC, and PIT emulation at compile time
- Share device posted IRQ code between SVM and VMX and harden it
against bugs and runtime errors
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups
O(1) instead of O(n)
- For MMIO stale data mitigation, track whether or not a vCPU has
access to (host) MMIO based on whether the page tables have MMIO
pfns mapped; using VFIO is prone to false negatives
- Rework the MSR interception code so that the SVM and VMX APIs are
more or less identical
- Recalculate all MSR intercepts from scratch on MSR filter changes,
instead of maintaining shadow bitmaps
- Advertise support for LKGS (Load Kernel GS base), a new instruction
that's loosely related to FRED, but is supported and enumerated
independently
- Fix a user-triggerable WARN that syzkaller found by setting the
vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting
the vCPU into VMX Root Mode (post-VMXON). Trying to detect every
possible path leading to architecturally forbidden states is hard
and even risks breaking userspace (if it goes from valid to valid
state but passes through invalid states), so just wait until
KVM_RUN to detect that the vCPU state isn't allowed
- Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling
interception of APERF/MPERF reads, so that a "properly" configured
VM can access APERF/MPERF. This has many caveats (APERF/MPERF
cannot be zeroed on vCPU creation or saved/restored on suspend and
resume, or preserved over thread migration let alone VM migration)
but can be useful whenever you're interested in letting Linux
guests see the effective physical CPU frequency in /proc/cpuinfo
- Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been
created, as there's no known use case for changing the default
frequency for other VM types and it goes counter to the very reason
why the ioctl was added to the vm file descriptor. And also, there
would be no way to make it work for confidential VMs with a
"secure" TSC, so kill two birds with one stone
- Dynamically allocation the shadow MMU's hashed page list, and defer
allocating the hashed list until it's actually needed (the TDP MMU
doesn't use the list)
- Extract many of KVM's helpers for accessing architectural local
APIC state to common x86 so that they can be shared by guest-side
code for Secure AVIC
- Various cleanups and fixes
x86 (Intel):
- Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest.
Failure to honor FREEZE_IN_SMM can leak host state into guests
- Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to
prevent L1 from running L2 with features that KVM doesn't support,
e.g. BTF
x86 (AMD):
- WARN and reject loading kvm-amd.ko instead of panicking the kernel
if the nested SVM MSRPM offsets tracker can't handle an MSR (which
is pretty much a static condition and therefore should never
happen, but still)
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code
- Inhibit AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation
- Extend enable_ipiv module param support to SVM, by simply leaving
IsRunning clear in the vCPU's physical ID table entry
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected
by erratum #1235, to allow (safely) enabling AVIC on such CPUs
- Request GA Log interrupts if and only if the target vCPU is
blocking, i.e. only if KVM needs a notification in order to wake
the vCPU
- Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to
the vCPU's CPUID model
- Accept any SNP policy that is accepted by the firmware with respect
to SMT and single-socket restrictions. An incompatible policy
doesn't put the kernel at risk in any way, so there's no reason for
KVM to care
- Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and
use WBNOINVD instead of WBINVD when possible for SEV cache
maintenance
- When reclaiming memory from an SEV guest, only do cache flushes on
CPUs that have ever run a vCPU for the guest, i.e. don't flush the
caches for CPUs that can't possibly have cache lines with dirty,
encrypted data
Generic:
- Rework irqbypass to track/match producers and consumers via an
xarray instead of a linked list. Using a linked list leads to
O(n^2) insertion times, which is hugely problematic for use cases
that create large numbers of VMs. Such use cases typically don't
actually use irqbypass, but eliminating the pointless registration
is a future problem to solve as it likely requires new uAPI
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a
"void *", to avoid making a simple concept unnecessarily difficult
to understand
- Decouple device posted IRQs from VFIO device assignment, as binding
a VM to a VFIO group is not a requirement for enabling device
posted IRQs
- Clean up and document/comment the irqfd assignment code
- Disallow binding multiple irqfds to an eventfd with a priority
waiter, i.e. ensure an eventfd is bound to at most one irqfd
through the entire host, and add a selftest to verify eventfd:irqfd
bindings are globally unique
- Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues
related to private <=> shared memory conversions
- Drop guest_memfd's .getattr() implementation as the VFS layer will
call generic_fillattr() if inode_operations.getattr is NULL
- Fix issues with dirty ring harvesting where KVM doesn't bound the
processing of entries in any way, which allows userspace to keep
KVM in a tight loop indefinitely
- Kill off kvm_arch_{start,end}_assignment() and x86's associated
tracking, now that KVM no longer uses assigned_device_count as a
heuristic for either irqbypass usage or MDS mitigation
Selftests:
- Fix a comment typo
- Verify KVM is loaded when getting any KVM module param so that
attempting to run a selftest without kvm.ko loaded results in a
SKIP message about KVM not being loaded/enabled (versus some random
parameter not existing)
- Skip tests that hit EACCES when attempting to access a file, and
print a "Root required?" help message. In most cases, the test just
needs to be run with elevated permissions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits)
Documentation: KVM: Use unordered list for pre-init VGIC registers
RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map()
RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs
RISC-V: perf/kvm: Add reporting of interrupt events
RISC-V: KVM: Enable ring-based dirty memory tracking
RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap
RISC-V: KVM: Delegate illegal instruction fault to VS mode
RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs
RISC-V: KVM: Factor-out g-stage page table management
RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence
RISC-V: KVM: Introduce struct kvm_gstage_mapping
RISC-V: KVM: Factor-out MMU related declarations into separate headers
RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range()
RISC-V: KVM: Don't flush TLB when PTE is unchanged
RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH
RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize()
RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init()
RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
...
Tracepoints take up memory (around 5K per tracepoint) even when they are
unused. Changes are being made to detect when a tracepoint is defined but
unused and a warning is shown at build. But those changes are not yet
ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config settings
to match the config settings of where they are instantiated. Some
tracepoints were moved into architecture specific code as only one
architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if statement
The ftrace_test_filter tracepoint which is defined when ftrace selftests
are configured and is used to test the filter logic, but the tracepoint is
not actually called. It is put into an if statement to not have it get
compiled out, but also not warn for not being used.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIlYqxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qisrAQD+pu2en9LAXLcgbFxQOwhbACpxOpmT
3LiE2+MvDR3ckQD/Vyi31XebdRmj3leJ7ENf28oa155y1pyK/onrPgDHyQ4=
=nFfn
-----END PGP SIGNATURE-----
Merge tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracepoint cleanup from Steven Rostedt:
"Remove or hide unused tracepoints
Tracepoints take up memory (around 5K per tracepoint) even when they
are unused. Changes are being made to detect when a tracepoint is
defined but unused and a warning is shown at build. But those changes
are not yet ready for inclusion.
- Fix some of the unused tracepoints that it detected
Some tracepoints were removed and others were hidden by config
settings to match the config settings of where they are
instantiated. Some tracepoints were moved into architecture
specific code as only one architecture used them.
- Call the ftrace_test_filter tracepoint in an unreachable if
statement
The ftrace_test_filter tracepoint which is defined when ftrace
selftests are configured and is used to test the filter logic, but
the tracepoint is not actually called. It is put into an if
statement to not have it get compiled out, but also not warn for
not being used"
* tag 'trace-unused-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: sched: Hide numa events under CONFIG_NUMA_BALANCING
powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64
tracing: Call trace_ftrace_test_filter() for the event
tracing: arm: arm64: Hide trace events ipi_raise, ipi_entry and ipi_exit
binder: Remove unused binder lock events
PM: tracing: Hide power_domain_target event under ARCH_OMAP2PLUS
PM: tracing: Hide device_pm_callback events under PM_SLEEP
PM: tracing: Hide psci_domain_idle events under ARM_PSCI_CPUIDLE
PM: cpufreq: powernv/tracing: Move powernv_throttle trace event
alarmtimer: Hide alarmtimer_suspend event when RTC_CLASS is not configured
tracing, AER: Hide PCIe AER event when PCIEAER is not configured
- Added Linear temporal logic monitors for RT application
Real-time applications may have design flaws causing them to have
unexpected latency. For example, the applications may raise page faults, or
may be blocked trying to take a mutex without priority inheritance.
However, while attempting to implement DA monitors for these real-time
rules, deterministic automaton is found to be inappropriate as the
specification language. The automaton is complicated, hard to understand,
and error-prone.
For these cases, linear temporal logic is found to be more suitable. The
LTL is more concise and intuitive.
- Make printk_deferred() public
The new monitors needed access to printk_deferred(). Make them visible for
the entire kernel.
- Add a vpanic() to allow for va_list to be passed to panic.
- Add rtapp container monitor.
A collection of monitors that check for common problems with real-time
applications that cause unexpected latency.
- Add page fault tracepoints to risc-v
These tracepoints are necessary to for the RV monitor to run on risc-v.
- Fix the behaviour of the rv tool with -s and idle tasks.
- Allow the rv tool to gracefully terminate with SIGTERM
- Adjusts dot2c not to create lines over 100 columns
- Properly order nested monitors in the RV Kconfig file
- Return the registration error in all DA monitor instead of 0
- Update and add new sched collection monitors
Replace tss and sncid monitors with more complete sts:
Not only prove that switches occur in scheduling context and scheduling
needs interrupt disabled but also that each call to the scheduler
disables interrupts to (optionally) switch.
New monitor: nrp
Preemption requires need resched which is cleared by any switch
(includes a non optimal workaround for /nested/ preemptions)
New monitor: sssw
suspension requires setting the task to sleepable and, after the
switch occurs, the task requires a wakeup to come back to runnable
New monitor: opid
waking and need-resched operations occur with interrupts and
preemption disabled or in IRQ without explicitly disabling preemption
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIk8cBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qi3DAQCFu6DM7uPSh94oggWlH2LukOYVGk2b
CvGrqMFuefae7QD/aK9nCMfzaBehixMOMQHLHELEh527Hd+RwQCrlnLALQU=
=r5HZ
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verification updates from Steven Rostedt:
- Added Linear temporal logic monitors for RT application
Real-time applications may have design flaws causing them to have
unexpected latency. For example, the applications may raise page
faults, or may be blocked trying to take a mutex without priority
inheritance.
However, while attempting to implement DA monitors for these
real-time rules, deterministic automaton is found to be inappropriate
as the specification language. The automaton is complicated, hard to
understand, and error-prone.
For these cases, linear temporal logic is found to be more suitable.
The LTL is more concise and intuitive.
- Make printk_deferred() public
The new monitors needed access to printk_deferred(). Make them
visible for the entire kernel.
- Add a vpanic() to allow for va_list to be passed to panic.
- Add rtapp container monitor.
A collection of monitors that check for common problems with
real-time applications that cause unexpected latency.
- Add page fault tracepoints to risc-v
These tracepoints are necessary to for the RV monitor to run on
risc-v.
- Fix the behaviour of the rv tool with -s and idle tasks.
- Allow the rv tool to gracefully terminate with SIGTERM
- Adjusts dot2c not to create lines over 100 columns
- Properly order nested monitors in the RV Kconfig file
- Return the registration error in all DA monitor instead of 0
- Update and add new sched collection monitors
Replace tss and sncid monitors with more complete sts:
Not only prove that switches occur in scheduling context and scheduling
needs interrupt disabled but also that each call to the scheduler
disables interrupts to (optionally) switch.
New monitor: nrp
Preemption requires need resched which is cleared by any switch
(includes a non optimal workaround for /nested/ preemptions)
New monitor: sssw
suspension requires setting the task to sleepable and, after the
switch occurs, the task requires a wakeup to come back to runnable
New monitor: opid
waking and need-resched operations occur with interrupts and
preemption disabled or in IRQ without explicitly disabling
preemption"
* tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (48 commits)
rv: Add opid per-cpu monitor
rv: Add nrp and sssw per-task monitors
rv: Replace tss and sncid monitors with more complete sts
sched: Adapt sched tracepoints for RV task model
rv: Retry when da monitor detects race conditions
rv: Adjust monitor dependencies
rv: Use strings in da monitors tracepoints
rv: Remove trailing whitespace from tracepoint string
rv: Add da_handle_start_run_event_ to per-task monitors
rv: Fix wrong type cast in reactors_show() and monitor_reactor_show()
rv: Fix wrong type cast in monitors_show()
rv: Remove struct rv_monitor::reacting
rv: Remove rv_reactor's reference counter
rv: Merge struct rv_reactor_def into struct rv_reactor
rv: Merge struct rv_monitor_def into struct rv_monitor
rv: Remove unused field in struct rv_monitor_def
rv: Return init error when registering monitors
verification/rvgen: Organise Kconfig entries for nested monitors
tools/dot2c: Fix generated files going over 100 column limit
tools/rv: Stop gracefully also on SIGTERM
...
- Rewind persistent ring buffer on boot
When the persistent ring buffer is being used for live kernel tracing and
the system crashes, the tool that is reading the trace may not have recorded
the data when the system crashed. Although the persistent ring buffer still
has that data, when reading it after a reboot, it will start where it left
off. That is, what was read will not be accessible.
Instead, on reboot, have the persistent ring buffer restart where the data
starts and this will allow the tooling to recover what was lost when the
crash occurred.
- Remove the ring_buffer_read_prepare_sync() logic
Reading the trace file required stopping writing to the ring buffer as the
trace file is only an iterator and does not consume what it read. It was
originally not safe to read the ring buffer in this mode and required
disabling writing. The ring_buffer_read_prepare_sync() logic was used to
stop each per_cpu ring buffer, call synchronize_rcu() and then start the
iterator. This was used instead of calling synchronize_rcu() for each
per_cpu buffer.
Today, the iterator has been updated where it is safe to read the trace file
while writing to the ring buffer is still occurring. There is no more need
to do this synchronization and it is causing large delays on machines with
many CPUs. Remove this unneeded synchronization.
- Make static string array a constant in show_irq_str()
Making the string array into a constant has shown to decrease code text/data
size.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkfURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnx4AQCNXOuKYJXDvXrkwf449agwrn0lCVyI
vV0L65nyIrakpAD8COV/lw8DhlCpb/Lijlzzo5L0n9QpEElNpq5uEntNwgE=
=1YIy
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- Rewind persistent ring buffer on boot
When the persistent ring buffer is being used for live kernel tracing
and the system crashes, the tool that is reading the trace may not
have recorded the data when the system crashed.
Although the persistent ring buffer still has that data, when reading
it after a reboot, it will start where it left off. That is, what was
read will not be accessible.
Instead, on reboot, have the persistent ring buffer restart where the
data starts and this will allow the tooling to recover what was lost
when the crash occurred.
- Remove the ring_buffer_read_prepare_sync() logic
Reading the trace file required stopping writing to the ring buffer
as the trace file is only an iterator and does not consume what it
read. It was originally not safe to read the ring buffer in this mode
and required disabling writing. The ring_buffer_read_prepare_sync()
logic was used to stop each per_cpu ring buffer, call
synchronize_rcu() and then start the iterator. This was used instead
of calling synchronize_rcu() for each per_cpu buffer.
Today, the iterator has been updated where it is safe to read the
trace file while writing to the ring buffer is still occurring. There
is no more need to do this synchronization and it is causing large
delays on machines with many CPUs. Remove this unneeded
synchronization.
- Make static string array a constant in show_irq_str()
Making the string array into a constant has shown to decrease code
text/data size.
* tag 'trace-ringbuffer-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Make the const read-only 'type' static
ring-buffer: Remove ring_buffer_read_prepare_sync()
tracing: ring_buffer: Rewind persistent ring buffer on reboot
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops is
registered twice it can mess up the accounting and it will not work as
expected later. Trigger a warning if something registers it twice as to
catch bugs before they are found by things just not working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very expensive
and only exists to help architectures support ftrace, do not make it an
option. As soon as an architecture supports DYNAMIC_FTRACE make it use it.
This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the comment says
/* sign + log10(MAX_INT) + '\0' */ which is actually 12.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkVkRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmdxAPsGcyT/gnyX/wf70cI63QoODrlRAd7M
tg3R0J0H41U05QD/apttbA9GSdZ8bDLLSFAXTJgr8f4GvYvbUsmu2sMBBA8=
=gd9V
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Keep track of when fgraph_ops are registered or not
Keep accounting of when fgraph_ops are registered as if a fgraph_ops
is registered twice it can mess up the accounting and it will not
work as expected later. Trigger a warning if something registers it
twice as to catch bugs before they are found by things just not
working as expected.
- Make DYNAMIC_FTRACE always enabled for architectures that support it
As static ftrace (where all functions are always traced) is very
expensive and only exists to help architectures support ftrace, do
not make it an option. As soon as an architecture supports
DYNAMIC_FTRACE make it use it. This simplifies the code.
- Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it
redundant with the HAVE_DYNAMIC_FTRACE.
- Make pid_ptr string size match the comment
In print_graph_proc() the pid_ptr string is of size 11, but the
comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12.
* tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it
fgraph: Keep track of when fgraph_ops are registered or not
fgraph: Make pid_str size match the comment
- Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow.
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow.
- Fix a typo in the above commit.
- New features for eprobe and tprobe events:
- Add support for arrays in eprobes.
- Support multiple tprobes on the same tracepoint.
- Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead.
- Register tracepoints for tprobe events only when enabled to
resolve a lock dependency.
- Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and __get_insn_slot().
- Sort #include alphabetically in the probes code.
- Remove the unused 'mod' field from the tprobe-event.
- Clean up the entry-arg storing code in probe-events.
- Selftest update
- Enable fprobe events before checking enable_functions in selftests.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmiJ2DQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bSfkH/06Zn5I55rU85FKSBQll
FN4hipmef/9Nd13skDwpEuFyzLPNS4P1up/UBUuyDQUTlO74+t2zSFO2dpcNrWmu
sPTenQ+6h82H3K591WTIC23VzF54syIbFLXEj8iMBALT3wyU4Nn0bs4DCbnTo5HX
R3NVo77rk6wxNJoKYOtT6ALf/lHonuNlGF+KTUGWP8UbWsIY3fIp0RWWy572M0bt
+YBE8D8RIVrw+ZY+vNKn1LdZdWlR1ton518XDf1gV9isTCfKErcd/6HJKwuj5q2v
qMgwiaKK+Gne/ylAKmWLEg2oNDo7kpyfW+612oiECitgZkqxOXhyYYfWgRt1lFNp
Wb8=
=E+Z6
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow
- Fix a typo in the above commit
New features for eprobe and tprobe events:
- Add support for arrays in eprobes
- Support multiple tprobes on the same tracepoint
Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead
- Register tracepoints for tprobe events only when enabled to resolve
a lock dependency
Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and
__get_insn_slot()
- Sort #include alphabetically in the probes code
- Remove the unused 'mod' field from the tprobe-event
- Clean up the entry-arg storing code in probe-events
Selftest update
- Enable fprobe events before checking enable_functions in selftests"
* tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: trace_fprobe: Fix typo of the semicolon
tracing: Have eprobes handle arrays
tracing: probes: Add a kerneldoc for traceprobe_parse_event_name()
tracing: uprobe-event: Allocate string buffers from heap
tracing: eprobe-event: Allocate string buffers from heap
tracing: kprobe-event: Allocate string buffers from heap
tracing: fprobe-event: Allocate string buffers from heap
tracing: probe: Allocate traceprobe_parse_context from heap
tracing: probes: Sort #include alphabetically
kprobes: Add missing kerneldoc for __get_insn_slot
tracing: tprobe-events: Register tracepoint when enable tprobe event
selftests: tracing: Enable fprobe events before checking enable_functions
tracing: fprobe-events: Register fprobe-events only when it is enabled
tracing: tprobe-events: Support multiple tprobes on the same tracepoint
tracing: tprobe-events: Remove mod field from tprobe-event
tracing: probe-events: Cleanup entry-arg storing code
- Fix a potential infinite recursion in fprobe by using preempt_*_notrace().
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmiIdp4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8boY8IAMQGLspd1mATbCfnrQKY
2X86OVygOJx7Iq1RCmOV6fhroe5EoNVR/b1RXmZJf2gIoN176zdBdYrBIFC97lYO
J1XaU/Ns1McBuKrOjc3TSYYioVPHJrKLiZ1vAoCicTkUsS34MQJXbbAlfdn424pb
J1wUeIDJF0WrFH9yVJ4mEs1dH81oCQ3iSG0CYx5/qLggcoubUFrVl4QessJwAuI6
VM+cKDsqMCltBovXFw/fAgWfiQp79z/uq9umOFLdZGsesqutMYTMgJXBS6slKl3a
qE2EQ57Op39A2zpk2hUoVoyv5Ey/XkfEjLU7WIMfqjLOL201IGQEKuyvR/mS54Kc
HDw=
=EeVm
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- Fix a potential infinite recursion in fprobe by using preempt_*_notrace()
* tag 'probes-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fprobe: Fix infinite recursion using preempt_*_notrace()
This pull request contains the following branches:
rcu-exp.23.07.2025
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization.
- Remove superfluous barrier in task unblock path.
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios.
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU.
rcu.22.07.2025
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU.
- Handle ->defer_qs_iw_pending field data race.
- Enable rcu_normal_wake_from_gp by default on systems with <= 16 CPUs.
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls.
- Refactor expedited handling condition in rcu_read_unlock_special().
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs.
torture-scripts.16.07.2025
- Cleanup and improve scripts : remove superfluous warnings for disabled
tests; better handling of kvm.sh --kconfig arg; suppress some confusing
diagnostics; tolerate bad kvm.sh args; add new diagnostic for build
output; fail allmodconfig testing on warnings.
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels.
- Disable default RCU-tasks and clocksource-wdog testing on arm64.
- Add EXPERT Kconfig option for arm64 KCSAN runs.
- Remove SRCU-lite testing.
rcutorture.16.07.2025
- Start torture writer threads creation after reader threads to handle
race in SRCU-P scenario.
- Add SRCU down_read()/up_read() test.
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(), print
number of up/down readers and the number of such readers which
migrated to other CPU.
- Ignore certain unsupported configurations for trivial RCU test.
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context.
- Enable checks and logs to capture intentionally exercised unexpected
scenarios (too short readers) for BUSTED test.
- Remove SRCU-lite testing.
srcu.19.07.2025
- Expedite SRCU-fast grace periods.
- Remove SRCU-lite implementation.
- Add guards for SRCU-fast readers.
rcu.nocb.18.07.2025
- Dump NOCB group leader state on stall detection.
- Robustify nocb_cb_kthread pointer accesses.
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled.
refscale.07.07.2025
- Fix multiplication overflow in "loops" and "nreaders" calculations.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCaINnRwAKCRAAHS7/6Z0w
pRYJAQC97ZDW2wBegDbQPsg5ECLX9Lyd6+IC65sdi38IENl+TQEA4/oMzUUceIH+
CDCnxv3fAMhPncJfvIukOLzMJpKw0go=
=8t4O
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Expedited grace period updates:
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization
- Remove superfluous barrier in task unblock path
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU
Core:
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU
- Handle ->defer_qs_iw_pending field data race
- Enable rcu_normal_wake_from_gp by default on systems with <= 16
CPUs
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls
- Refactor expedited handling condition in rcu_read_unlock_special()
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs
torture-scripts:
- Cleanup and improve scripts : remove superfluous warnings for
disabled tests; better handling of kvm.sh --kconfig arg; suppress
some confusing diagnostics; tolerate bad kvm.sh args; add new
diagnostic for build output; fail allmodconfig testing on warnings
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels
- Disable default RCU-tasks and clocksource-wdog testing on arm64
- Add EXPERT Kconfig option for arm64 KCSAN runs
- Remove SRCU-lite testing
rcutorture:
- Start torture writer threads creation after reader threads to
handle race in SRCU-P scenario
- Add SRCU down_read()/up_read() test
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(),
print number of up/down readers and the number of such readers
which migrated to other CPU
- Ignore certain unsupported configurations for trivial RCU test
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context
- Enable checks and logs to capture intentionally exercised
unexpected scenarios (too short readers) for BUSTED test
- Remove SRCU-lite testing
srcu:
- Expedite SRCU-fast grace periods
- Remove SRCU-lite implementation
- Add guards for SRCU-fast readers
rcu nocb:
- Dump NOCB group leader state on stall detection
- Robustify nocb_cb_kthread pointer accesses
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled
refscale:
- Fix multiplication overflow in "loops" and "nreaders" calculations"
* tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (49 commits)
rcu: Document concurrent quiescent state reporting for offline CPUs
rcu: Document separation of rcu_state and rnp's gp_seq
rcu: Document GP init vs hotplug-scan ordering requirements
srcu: Add guards for SRCU-fast readers
rcu: Fix delayed execution of hurry callbacks
rcu: Refactor expedited handling check in rcu_read_unlock_special()
checkpatch: Remove SRCU-lite deprecation
srcu: Remove SRCU-lite implementation
srcu: Expedite SRCU-fast grace periods
rcutorture: Remove support for SRCU-lite
rcutorture: Remove SRCU-lite scenarios
torture: Remove support for SRCU-lite
torture: Make torture.sh --allmodconfig testing fail on warnings
torture: Add "ERROR" diagnostic for testing kernel-build output
torture: Make torture.sh tolerate runs having bad kvm.sh arguments
torture: Add textid.txt file to --do-allmodconfig and --do-rcu-rust runs
torture: Extract testid.txt generation to separate script
torture: Suppress "find" diagnostics from torture.sh --do-none run
torture: Provide EXPERT Kconfig option for arm64 KCSAN torture.sh runs
rcu: Fix rcu_read_unlock() deadloop due to IRQ work
...
- A single fix to silence an uninitialized variable warning
This change has had a few days of linux-next exposure.
-----BEGIN PGP SIGNATURE-----
iIcEABYKAC8WIQR7t4b/75lzOR3l5rcxsLN3bbyLnwUCaIdstREcZWx2ZXJAZ29v
Z2xlLmNvbQAKCRAxsLN3bbyLnxfiAQCHSdHCyTOTP6YghSkd2ZIqfgQ8O9Y8iKGf
EBfa6nvDVQD/bvUioqMpn/IgD6sbp76wbSOjmaJN19AGH8sfQIB13gI=
=yGgW
-----END PGP SIGNATURE-----
Merge tag 'kcsan-20250728-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux
Pull Kernel Concurrency Sanitizer (KCSAN) update from Marco Elver:
- A single fix to silence an uninitialized variable warning
* tag 'kcsan-20250728-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/melver/linux:
kcsan: test: Initialize dummy variable
-----BEGIN PGP SIGNATURE-----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=/O3j
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Remove usermode driver (UMD) framework (Thomas Weißschuh)
- Introduce Strongly Connected Component (SCC) in the verifier to
detect loops and refine register liveness (Eduard Zingerman)
- Allow 'void *' cast using bpf_rdonly_cast() and corresponding
'__arg_untrusted' for global function parameters (Eduard Zingerman)
- Improve precision for BPF_ADD and BPF_SUB operations in the verifier
(Harishankar Vishwanathan)
- Teach the verifier that constant pointer to a map cannot be NULL
(Ihor Solodrai)
- Introduce BPF streams for error reporting of various conditions
detected by BPF runtime (Kumar Kartikeya Dwivedi)
- Teach the verifier to insert runtime speculation barrier (lfence on
x86) to mitigate speculative execution instead of rejecting the
programs (Luis Gerhorst)
- Various improvements for 'veristat' (Mykyta Yatsenko)
- For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to
improve bug detection by syzbot (Paul Chaignon)
- Support BPF private stack on arm64 (Puranjay Mohan)
- Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's
node (Song Liu)
- Introduce kfuncs for read-only string opreations (Viktor Malik)
- Implement show_fdinfo() for bpf_links (Tao Chen)
- Reduce verifier's stack consumption (Yonghong Song)
- Implement mprog API for cgroup-bpf programs (Yonghong Song)
* tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits)
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
bpf: Add log for attaching tracing programs to functions in deny list
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
bpf: Fix various typos in verifier.c comments
bpf: Add third round of bounds deduction
selftests/bpf: Test invariants on JSLT crossing sign
selftests/bpf: Test cross-sign 64bits range refinement
selftests/bpf: Update reg_bound range refinement logic
bpf: Improve bounds when s64 crosses sign boundary
bpf: Simplify bounds refinement from s32
selftests/bpf: Enable private stack tests for arm64
bpf, arm64: JIT support for private stack
bpf: Move bpf_jit_get_prog_name() to core.c
bpf, arm64: Fix fp initialization for exception boundary
umd: Remove usermode driver framework
bpf/preload: Don't select USERMODE_DRIVER
selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
selftests/bpf: Increase xdp data size for arm64 64K page size
...
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
Eprobes were added in 5.15 and were selected whenever any of the other
probe events were selected. If kprobe events were enabled (which it is by
default if kprobes are enabled) it would enable eprobe events as well. The
same for uprobes and fprobes.
Have eprobes have its own config and it gets enabled by default if tracing
is enabled.
Link: https://lore.kernel.org/all/20250729102636.b7cce553e7cc263722b12365@kernel.org/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/20250730140945.360286733@kernel.org
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
* Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective subsystems. Only 5
(out of the original 50) will remain in kernel/sysctl.c file; these handle
either sysctl or common arch variables.
By decentralizing sysctl registrations, subsystem maintainers regain control
over their sysctl interfaces, improving maintainability and reducing the
likelihood of merge conflicts.
* docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented in the
check-sysctl-docs script. This script can now be used to automatically
identify if documentation is missing.
* Testing
All these have been in linux-next since rc3, giving them a solid 3 to 4 weeks
worth of testing. Additionally, sysctl selftests and kunit were also run
locally on my x86_64
-----BEGIN PGP SIGNATURE-----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=R369
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts between
clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on hardware
with FEAT_BBM (break-before-make) level 2 and no TLB conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call
-----BEGIN PGP SIGNATURE-----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=5h1C
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers
that didn't check the return code. (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the
internal APIs to local variables. (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_*
(Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up.
(Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RExf
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers that didn't
check the return code (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the internal APIs
to local variables (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_* (Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up. (Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)"
* tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Speed up lockdep_unregister_key() with expedited RCU synchronization
locking/mutex: Remove redundant #ifdefs
locking/lockdep: Change 'static const' variables to enum values
locking/lockdep: Avoid struct return in lock_stats()
locking/rwsem: Use OWNER_NONSPINNABLE directly instead of OWNER_SPINNABLE
rust: sync: Add #[must_use] to Lock::try_lock()
locking/mutex: Mark devm_mutex_init() as __must_check
leds: lp8860: Check return value of devm_mutex_init()
spi: spi-nxp-fspi: Check return value of devm_mutex_init()
local_lock: Move this_cpu_ptr() notation from internal to main header
Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair
scheduler. (Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout
the entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's
data structures and logic on UP kernel too, even though
they are not used, to simplify the scheduler and remove
around 200 #ifdef/[#else]/#endif blocks from the
scheduler. (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling
for better interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris Mason)
- Remove sched_domain_topology_level::flags to simplify the code (Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for mutex-owning
tasks to inherit the scheduling context of higher priority waiters.
Currently limited to a single runqueue and conditional on CONFIG_EXPERT,
and other limitations. (John Stultz, Peter Zijlstra, Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive dl_server handling
(Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock() usage
(Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid unnecessary
function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info (Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set
(Luis Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8T0v
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair scheduler
(Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout the
entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's data structures
and logic on UP kernel too, even though they are not used, to
simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
blocks from the scheduler (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling for better
interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
Mason)
- Remove sched_domain_topology_level::flags to simplify the code
(Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for
mutex-owning tasks to inherit the scheduling context of higher
priority waiters.
Currently limited to a single runqueue and conditional on
CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri
Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive
dl_server handling (Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock()
usage (Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid
unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter
Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri
Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info
(Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)"
* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
sched/idle: Remove play_idle()
sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
sched: Start blocked_on chain processing in find_proxy_task()
sched: Fix proxy/current (push,pull)ability
sched: Add an initial sketch of the find_proxy_task() function
sched: Fix runtime accounting w/ split exec & sched contexts
sched: Move update_curr_task logic into update_curr_se
locking/mutex: Add p->blocked_on wrappers for correctness checks
locking/mutex: Rework task_struct::blocked_on
sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
sched/topology: Remove sched_domain_topology_level::flags
x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
x86/smpboot: moves x86_topology to static initialize and truncate
x86/smpboot: remove redundant CONFIG_SCHED_SMT
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
tools/sched: Add root_domains_dump.py which dumps root domains info
sched/deadline: Fix accounting after global limits change
sched/deadline: Reset extra_bw to max_bw when clearing root domains
sched/deadline: Initialize dl_servers after SMP
...
to enable stuffing independently from Retbleed, do some cleanups to
simplify and streamline the code
- Simplify SRSO and make mitigation types selection more versatile
depending on the Retbleed mitigation selection. Simplify code some
- Add the second part of the attack vector controls which provide a lot
friendlier user interface to the speculation mitigations than
selecting each one by one as it is now.
Instead, the selection of whole attack vectors which are relevant to
the system in use can be done and protection against only those
vectors is enabled, thus giving back some performance to the users
-----BEGIN PGP SIGNATURE-----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=zO6b
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU mitigation updates from Borislav Petkov:
- Untangle the Retbleed from the ITS mitigation on Intel. Allow for ITS
to enable stuffing independently from Retbleed, do some cleanups to
simplify and streamline the code
- Simplify SRSO and make mitigation types selection more versatile
depending on the Retbleed mitigation selection. Simplify code some
- Add the second part of the attack vector controls which provide a lot
friendlier user interface to the speculation mitigations than
selecting each one by one as it is now.
Instead, the selection of whole attack vectors which are relevant to
the system in use can be done and protection against only those
vectors is enabled, thus giving back some performance to the users
* tag 'x86_bugs_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Print enabled attack vectors
x86/bugs: Add attack vector controls for TSA
x86/pti: Add attack vector controls for PTI
x86/bugs: Add attack vector controls for ITS
x86/bugs: Add attack vector controls for SRSO
x86/bugs: Add attack vector controls for L1TF
x86/bugs: Add attack vector controls for spectre_v2
x86/bugs: Add attack vector controls for BHI
x86/bugs: Add attack vector controls for spectre_v2_user
x86/bugs: Add attack vector controls for retbleed
x86/bugs: Add attack vector controls for spectre_v1
x86/bugs: Add attack vector controls for GDS
x86/bugs: Add attack vector controls for SRBDS
x86/bugs: Add attack vector controls for RFDS
x86/bugs: Add attack vector controls for MMIO
x86/bugs: Add attack vector controls for TAA
x86/bugs: Add attack vector controls for MDS
x86/bugs: Define attack vectors relevant for each bug
x86/Kconfig: Add arch attack vector support
cpu: Define attack vectors
...
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library, and
also provides flexibility for sandboxing scenarios.
- Cleanup and extend the user dispatch selftest
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmiIg6UTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoWn7EACTvQpu7tGd1rN9hCjiB1W5po7nvlCd
gKghjS9Kp0KttTDQPLVcmnH06BhDHWNNn1HXZ1ORea4bpLywiKHtVgqUAsJDsBsv
ETeTHYNphk0sktvAqp3XusA6HF4T0s1KXJQj3W1ACrYZWRkK/VystCLYwBRGpc3r
cj7jAFmJyNpU236R5XYJ7ooHfPYpzZ8VAHBO8ykK7muHDfyBRXEIlmkGep++ctSv
v0uZXAy6LONljKg87YJTien0UA7ze9lFgPTuV1y/qfaLbYNekUaJSDjfuhOpZZUw
TzSh9OYoIvKpd0ylHwB1qMLd5CaXNicaeLfTW3xbX06KaXa7WNAonS35sK0EjhtZ
0bBA9g6bRhphyh0tzR4saF9bczNvJydNCn7/QFo9dKbQUEL/FRXtJiIeusVx/0fJ
+ZqWRTcEdDw2Rsyv52hKgyEJi7F3nL9ovabUN9P1/0aPcTdM3WekMpSOJm1U6wVF
e6oSyeoeNdjcdxgWbQrgRNbmq5CPEV3ig5J+G418r5DTF3ifqZX+WscijUtKTu5K
V5GpLc0PL9eoigQ37LmGkwK/4xoB9SAPTQuzUs9qgh9NidwT0cCfoNxpeGh6GeHX
GLHPGU61vZaefxpwuAuv+SQSgxXSKk2/H/ijPzSjrX/PkUp7MoX9XoOQAh4FxZjO
ok5YEUGXzSJfXQ==
=yaCQ
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library,
and also provides flexibility for sandboxing scenarios
- Cleanup and extend the user dispatch selftest
* tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Split generic entry into generic exception and syscall entry
selftests: Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON
syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
selftests: Fix errno checking in syscall_user_dispatch test
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs. the single instance rcuref
variant.
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32.
- Cleanups and improvements in selftests and futex bench
-----BEGIN PGP SIGNATURE-----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=WqFq
-----END PGP SIGNATURE-----
Merge tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs the single instance rcuref
variant
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32
- Cleanups and improvements in selftests and futex bench
* tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Fix spelling mistake "Succeffuly" -> "Successfully"
selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
perf bench futex: Remove support for IMMUTABLE
selftests/futex: Remove support for IMMUTABLE
futex: Remove support for IMMUTABLE
futex: Make futex_private_hash_get() static
futex: Use RCU-based per-CPU reference counting instead of rcuref_t
selftests/futex: Adapt the private hash test to RCU related changes
- Introduce support for auxiliary timekeepers
PTP clocks can be disconnected from the universal CLOCK_TAI reality
for various reasons including regularatory requirements for
functional safety redundancy.
The kernel so far only supports a single notion of time, which means
that all clocks are correlated in frequency and only differ by
offset to each other.
Access to non-correlated PTP clocks has been available so far only
through the file descriptor based "POSIX clock IDs", which are
subject to locking and have to go all the way out to the hardware.
The access is not only horribly slow, as it has to go all the way out
to the NIC/PTP hardware, but that also prevents the kernel to read
the time of such clocks e.g. from the network stack, where it is
required for TSN networking both on the transmit and receive side
unless the hardware provides offloading.
The auxiliary clocks provide a mechanism to support arbitrary clocks
which are not correlated to the system clock. This is not restricted
to the PTP use case on purpose as there is no kernel side association
of these clocks to a particular PTP device because that's a pure user
space configuration decision. Having them independent allows to
utilize them for other purposes and also enables them to be tested
without hardware dependencies.
To avoid pointless overhead these clocks have to be enabled
individualy via a new sysfs interface to reduce the overhead to a
single compare in the hotpath if they are enabled at the Kconfig
level at all.
These clocks utilize the existing timekeeping/NTP infrastructures,
which has been made possible over the recent releases by incrementaly
converting these infrastructures over from a single static instance
to a multi-instance pointer based implementation without any
performance regression reported.
The auxiliary clocks provide the same "emulation" of a "correct"
clock as the existing CLOCK_* variants do with an independent
instance of data and provide the same steering mechanism through the
existing sys_clock_adjtime() interface, which has been confirmed to
work by the chronyd(8) maintainer.
That allows to provide lockless kernel internal and VDSO support so
that applications and kernel internal functionalities can access
these clocks without restrictions and at the same performance as the
existing system clocks.
- Avoid double notifications in the adjtimex() syscall. Not a big issue,
but a trivial to avoid latency source.
-----BEGIN PGP SIGNATURE-----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=TTjt
-----END PGP SIGNATURE-----
Merge tag 'timers-ptp-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and VDSO updates from Thomas Gleixner:
- Introduce support for auxiliary timekeepers
PTP clocks can be disconnected from the universal CLOCK_TAI reality
for various reasons including regularatory requirements for
functional safety redundancy.
The kernel so far only supports a single notion of time, which means
that all clocks are correlated in frequency and only differ by offset
to each other.
Access to non-correlated PTP clocks has been available so far only
through the file descriptor based "POSIX clock IDs", which are
subject to locking and have to go all the way out to the hardware.
The access is not only horribly slow, as it has to go all the way out
to the NIC/PTP hardware, but that also prevents the kernel to read
the time of such clocks e.g. from the network stack, where it is
required for TSN networking both on the transmit and receive side
unless the hardware provides offloading.
The auxiliary clocks provide a mechanism to support arbitrary clocks
which are not correlated to the system clock. This is not restricted
to the PTP use case on purpose as there is no kernel side association
of these clocks to a particular PTP device because that's a pure user
space configuration decision. Having them independent allows to
utilize them for other purposes and also enables them to be tested
without hardware dependencies.
To avoid pointless overhead these clocks have to be enabled
individualy via a new sysfs interface to reduce the overhead to a
single compare in the hotpath if they are enabled at the Kconfig
level at all.
These clocks utilize the existing timekeeping/NTP infrastructures,
which has been made possible over the recent releases by incrementaly
converting these infrastructures over from a single static instance
to a multi-instance pointer based implementation without any
performance regression reported.
The auxiliary clocks provide the same "emulation" of a "correct"
clock as the existing CLOCK_* variants do with an independent
instance of data and provide the same steering mechanism through the
existing sys_clock_adjtime() interface, which has been confirmed to
work by the chronyd(8) maintainer.
That allows to provide lockless kernel internal and VDSO support so
that applications and kernel internal functionalities can access
these clocks without restrictions and at the same performance as the
existing system clocks.
- Avoid double notifications in the adjtimex() syscall. Not a big
issue, but a trivial to avoid latency source.
* tag 'timers-ptp-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
vdso/gettimeofday: Add support for auxiliary clocks
vdso/vsyscall: Update auxiliary clock data in the datapage
vdso: Introduce aux_clock_resolution_ns()
vdso/gettimeofday: Introduce vdso_get_timestamp()
vdso/gettimeofday: Introduce vdso_set_timespec()
vdso/gettimeofday: Introduce vdso_clockid_valid()
vdso/gettimeofday: Return bool from clock_gettime() helpers
vdso/gettimeofday: Return bool from clock_getres() helpers
vdso/helpers: Add helpers for seqlocks of single vdso_clock
vdso/vsyscall: Split up __arch_update_vsyscall() into __arch_update_vdso_clock()
vdso/vsyscall: Introduce a helper to fill clock configurations
timekeeping: Remove the temporary CLOCK_AUX workaround
timekeeping: Provide ktime_get_clock_ts64()
timekeeping: Provide interface to control auxiliary clocks
timekeeping: Provide update for auxiliary timekeepers
timekeeping: Provide adjtimex() for auxiliary clocks
timekeeping: Prepare do_adtimex() for auxiliary clocks
timekeeping: Make do_adjtimex() reusable
timekeeping: Add auxiliary clock support to __timekeeping_inject_offset()
timekeeping: Make timekeeping_inject_offset() reusable
...
- Simplify the logic in the timer migration code
- Simplify the clocksource code by utilizing the more modern cpumask+*()
interfaces
-----BEGIN PGP SIGNATURE-----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=A19q
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Simplify the logic in the timer migration code
- Simplify the clocksource code by utilizing the more modern
cpumask+*() interfaces
* tag 'timers-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Use cpumask_next_wrap() in clocksource_watchdog()
clocksource: Use cpumask_any_but() in clocksource_verify_choose_cpus()
timers/migration: Clean up the loop in tmigr_quick_check()
The initial idea of making them const was correct as they were seperate
instances. When they got embedded into larger data structures, which are
even modified by the callback this got moot. The only reason why this went
unnoticed is that the required container_of() casts the const attribute
forcefully away.
Stop pretending that it is const.
-----BEGIN PGP SIGNATURE-----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=C0ua
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide cleanup of struct cycle_counter const annotations.
The initial idea of making them const was correct as they were
seperate instances. When they got embedded into larger data
structures, which are even modified by the callback this got moot. The
only reason why this went unnoticed is that the required
container_of() casts the const attribute forcefully away.
Stop pretending that it is const"
* tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/timecounter: Fix the lie that struct cyclecounter is const
Normally the tracee starts in SECCOMP_NOTIFY_INIT, sends an
event to the tracer, and starts to wait interruptibly. With
SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV, if the tracer receives the
message (SECCOMP_NOTIFY_SENT is reached) while the tracee was waiting
and is subsequently interrupted, the tracee begins to wait again
uninterruptibly (but killable).
This fails if SECCOMP_NOTIFY_REPLIED is reached before the tracee
is interrupted, as the check only considered SECCOMP_NOTIFY_SENT as a
condition to begin waiting again. In this case the tracee is interrupted
even though the tracer already acted on its behalf. This breaks the
assumption SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV wanted to ensure,
namely that the tracer can be sure the syscall is not interrupted or
restarted on the tracee after it is received on the tracer. Fix this
by also considering SECCOMP_NOTIFY_REPLIED when evaluating whether to
switch to uninterruptible waiting.
With the condition changed the loop in seccomp_do_user_notification()
would exit immediately after deciding that noninterruptible waiting
is required if the operation already reached SECCOMP_NOTIFY_REPLIED,
skipping the code that processes pending addfd commands first. Prevent
this by executing the remaining loop body one last time in this case.
Fixes: c2aa2dfef2 ("seccomp: Add wait_killable semantic to seccomp user notifier")
Reported-by: Ali Polatel <alip@chesswob.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220291
Signed-off-by: Johannes Nixdorf <johannes@nixdorf.dev>
Link: https://lore.kernel.org/r/20250725-seccomp-races-v2-1-cf8b9d139596@nixdorf.dev
Signed-off-by: Kees Cook <kees@kernel.org>
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled.\
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so it
supports arbitrary hart indices
- Add a command line parameter and related handling to disable the generic
RISCV IMSIC mechanism on platforms which use a trap-emulated IMSIC.
Unfortunatly this is required because there is no mechanism available to
discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend variants.
- The usual cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=5LGj
-----END PGP SIGNATURE-----
Merge tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- Add support of forced affinity setting to yet offline CPUs for the
MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
during the early bringup phase of a secondary CPU in the hotplug code
before the CPU is set online and interrupts are enabled
- Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
interrupt chip
- Make the interrupt routing to RISV-V harts specification compliant so
it supports arbitrary hart indices
- Add a command line parameter and related handling to disable the
generic RISCV IMSIC mechanism on platforms which use a trap-emulated
IMSIC. Unfortunatly this is required because there is no mechanism
available to discover this programatically.
- Enable wakeup sources on the Renesas RZV2H driver
- Convert interrupt chip drivers, which use a open coded variant of
msi_create_parent_irq_domain() to use the new functionality
- Convert interrupt chip drivers, which use the old style two level
implementation of MSI support over to the MSI parent mechanism to
prepare for removing at least one of the three PCI/MSI backend
variants.
- The usual cleanups and improvements all over the place
* tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
irqchip/riscv-imsic: Add kernel parameter to disable IPIs
irqchip/gic-v3: Fix GICD_CTLR register naming
irqchip/ls-scfg-msi: Fix NULL dereference in error handling
irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
irqchip/alpine-msi: Convert to __free
irqchip/alpine-msi: Convert to lock guards
irqchip/alpine-msi: Clean up whitespace style
irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain()
irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain()
irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain()
irqdomain: Add device pointer to irq_domain_info and msi_domain_info
irqchip/renesas-rzv2h: Remove unneeded includes
irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/aslint-sswi: Resolve hart index
...
- Improve localitu of smp_call_function_any() by utilizing
sched_numa_find_nth_cpu() instead of picking a random CPU
- Wait for work completion in smp_call_function_many_cond() only when
there was actually work enqueued
- Simplify functions by unutlizing the appropriate cpumask_*()
interfaces
- Trivial cleanups
-----BEGIN PGP SIGNATURE-----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=dFmz
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp updates from Thomas Gleixner:
"A set of updates for SMP function calls:
- Improve locality of smp_call_function_any() by utilizing
sched_numa_find_nth_cpu() instead of picking a random CPU
- Wait for work completion in smp_call_function_many_cond() only when
there was actually work enqueued
- Simplify functions by unutlizing the appropriate cpumask_*()
interfaces
- Trivial cleanups"
* tag 'smp-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Wait only if work was enqueued
smp: Defer check for local execution in smp_call_function_many_cond()
smp: Use cpumask_any_but() in smp_call_function_many_cond()
smp: Improve locality in smp_call_function_any()
smp: Fix typo in comment for raw_smp_processor_id()
- Prevent a interrupt migration related live lock in handle_edge_irq()
If the interrupt affinity is moved to a new target CPU and the
interrupt is currently handled on the previous target CPU for edge type
interrupts the handler might get stuck on the previous target for a
long time, which causes both involved CPUs to waste cycles and
eventually run into a soft-lockup situation.
Solve this by checking whether the interrupt is redirected to a new
target CPU and if the interrupt is handled on that new target CPU, busy
wait for completion instead of masking it and sending the pending but
which would cause the old CPU to re-run the handler and in the worst
case repeating this excercise for a long time.
This only works on architectures which use single CPU interrupt
targets, but that's so far the only ones where this behaviour has been
observed.
- Add a kunit test for interrupt disable depth counts
The nested interrupt disable depth has been an issue in the past
especially vs. free_irq(), interrupt shutdown and CPU hotplug and their
interactions. The test exercises the combinations of these scenarios
and checks for correctness.
-----BEGIN PGP SIGNATURE-----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=IgyG
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
- Prevent a interrupt migration related live lock in handle_edge_irq()
If the interrupt affinity is moved to a new target CPU and the
interrupt is currently handled on the previous target CPU for edge
type interrupts the handler might get stuck on the previous target
for a long time, which causes both involved CPUs to waste cycles and
eventually run into a soft-lockup situation.
Solve this by checking whether the interrupt is redirected to a new
target CPU and if the interrupt is handled on that new target CPU,
busy wait for completion instead of masking it and sending the
pending but which would cause the old CPU to re-run the handler and
in the worst case repeating this excercise for a long time.
This only works on architectures which use single CPU interrupt
targets, but that's so far the only ones where this behaviour has
been observed.
- Add a kunit test for interrupt disable depth counts
The nested interrupt disable depth has been an issue in the past
especially vs. free_irq(), interrupt shutdown and CPU hotplug and
their interactions. The test exercises the combinations of these
scenarios and checks for correctness.
* tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Prevent migration live lock in handle_edge_irq()
genirq: Split up irq_pm_check_wakeup()
genirq: Move irq_wait_for_poll() to call site
genirq: Remove pointless local variable
genirq: Add kunit tests for depth counts
- DEBUGFS
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
- SYSFS
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
- Support cache-ids for device-tree systems
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
- Rust
- Device
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
- Misc
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaIjkhwAKCRBFlHeO1qrK
LpXuAP9RWwfD9ZGgQZ9OsMk/0pZ2mDclaK97jcmI9TAeSxeZMgD1FHnOMTY7oSIi
iG7Muq0yLD+A5gk9HUnMUnFNrngWCg==
=jgRj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Don't populate the read-only 'type' on the stack at run time,
instead make it static.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250714160858.1234719-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a new API to retrieve a user space callstack called
unwind_user_faultable(). The difference between this user space stack
tracer from the current user space stack tracer is that this must be
called from faultable context as it may use routines to access user space
data that needs to be faulted in.
It can be safely called from entering or exiting a system call as the code
can still be faulted in there.
This code is based on work by Josh Poimboeuf's deferred unwinding code:
Link: https://lore.kernel.org/all/6052e8487746603bdb29b65f4033e739092d9925.1737511963.git.jpoimboe@kernel.org/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182405.147896868@kernel.org
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce a generic API for unwinding user stacks.
In order to expand user space unwinding to be able to handle more complex
scenarios, such as deferred unwinding and reading user space information,
create a generic interface that all architectures can use that support the
various unwinding methods.
This is an alternative method for handling user space stack traces from
the simple stack_trace_save_user() API. This does not replace that
interface, but this interface will be used to expand the functionality of
user space stack walking.
None of the structures introduced will be exposed to user space tooling.
Support for frame pointer unwinding is added. For an architecture to
support frame pointer unwinding it needs to enable
CONFIG_HAVE_UNWIND_USER_FP and define ARCH_INIT_USER_FP_FRAME.
By encoding the frame offsets in struct unwind_user_frame, much of this
code can also be reused for future unwinder implementations like sframe.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Cc: "Jose E. Marchesi" <jemarch@gnu.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/20250729182404.975790139@kernel.org
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Co-developed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/all/20250710164301.3094-2-mathieu.desnoyers@efficios.com/
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With CONFIG_DEBUG_INFO_BTF=y and PAHOLE_HAS_BTF_TAG=y, `__user` is
converted to `__attribute__((btf_type_tag("user")))`. In this case,
some syscall events have it for __user data, like below;
/sys/kernel/tracing # cat events/syscalls/sys_enter_openat/format
name: sys_enter_openat
ID: 720
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int __syscall_nr; offset:8; size:4; signed:1;
field:int dfd; offset:16; size:8; signed:0;
field:const char __attribute__((btf_type_tag("user"))) * filename; offset:24; size:8; signed:0;
field:int flags; offset:32; size:8; signed:0;
field:umode_t mode; offset:40; size:8; signed:0;
Then the trace event filter fails to set the string acceptable flag
(FILTER_PTR_STRING) to the field and rejects setting string filter;
# echo 'filename.ustring ~ "*ftracetest-dir.wbx24v*"' \
>> events/syscalls/sys_enter_openat/filter
sh: write error: Invalid argument
# cat error_log
[ 723.743637] event filter parse error: error: Expecting numeric field
Command: filename.ustring ~ "*ftracetest-dir.wbx24v*"
Since this __attribute__ makes format parsing complicated and not
needed, remove the __attribute__(.*) from the type string.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/175376583493.1688759.12333973498014733551.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
KVM IRQ changes for 6.17
- Rework irqbypass to track/match producers and consumers via an xarray
instead of a linked list. Using a linked list leads to O(n^2) insertion
times, which is hugely problematic for use cases that create large numbers
of VMs. Such use cases typically don't actually use irqbypass, but
eliminating the pointless registration is a future problem to solve as it
likely requires new uAPI.
- Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *",
to avoid making a simple concept unnecessarily difficult to understand.
- Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC,
and PIT emulation at compile time.
- Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c.
- Fix a variety of flaws and bugs in the AVIC device posted IRQ code.
- Inhibited AVIC if a vCPU's ID is too big (relative to what hardware
supports) instead of rejecting vCPU creation.
- Extend enable_ipiv module param support to SVM, by simply leaving IsRunning
clear in the vCPU's physical ID table entry.
- Disable IPI virtualization, via enable_ipiv, if the CPU is affected by
erratum #1235, to allow (safely) enabling AVIC on such CPUs.
- Dedup x86's device posted IRQ code, as the vast majority of functionality
can be shared verbatime between SVM and VMX.
- Harden the device posted IRQ code against bugs and runtime errors.
- Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1)
instead of O(n).
- Generate GA Log interrupts if and only if the target vCPU is blocking, i.e.
only if KVM needs a notification in order to wake the vCPU.
- Decouple device posted IRQs from VFIO device assignment, as binding a VM to
a VFIO group is not a requirement for enabling device posted IRQs.
- Clean up and document/comment the irqfd assignment code.
- Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e.
ensure an eventfd is bound to at most one irqfd through the entire host,
and add a selftest to verify eventfd:irqfd bindings are globally unique.
Since preempt_count_add/del() are tracable functions, it is not allowed
to use preempt_disable/enable() in ftrace handlers. Without this fix,
probing on `preempt_count_add%return` will cause an infinite recursion
of fprobes.
To fix this problem, use preempt_disable/enable_notrace() in
fprobe_return().
Link: https://lore.kernel.org/all/175374642359.1471729.1054175011228386560.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant
Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle
driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the device
suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/wC4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1O6MIAJtfclAleksv+PzbEyC+yk72zKinJg35
WJUk4Kz1yMOqAPazbpXRXt1tuxqyB3HWeixnTFyZbz+bbhZjYJ0lvpWGkdsFaS0i
NSbILSpHNGtOrP6s6hVKTBmLAdAzdWYWMQizlWgGrkhOiN5BnQzL7pAi2aGqu9KS
tGqnIg/3QwBAvnxijgpkm7qozOUMPJ9dzSvxMaFeB6JH7SNbTOODVFtsoD+mbJlH
YVMMWxih8b4MRJgAo4N2bL1Glp/Qnwg4ACawnQokt8Rknbtwku57QF9YwTbubr36
Ok7qbNnUSx0h9KtMQQNogLLkFreTJkbGknVWEwaWWhXNeW9l4cr6MWo=
=xVF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
Show the rejected function name when attaching tracing programs to
functions in deny list.
With this change, we know why tracing programs can't attach to functions
like __rcu_read_lock() from log.
$ ./fentry
libbpf: prog '__rcu_read_lock': BPF program load failed: -EINVAL
libbpf: prog '__rcu_read_lock': -- BEGIN PROG LOAD LOG --
Attaching tracing programs to function '__rcu_read_lock' is rejected.
Suggested-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250724151454.499040-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With this change, we know the precise rejected function name when
attaching fexit/fmod_ret to __noreturn functions from log.
$ ./fexit
libbpf: prog 'fexit': BPF program load failed: -EINVAL
libbpf: prog 'fexit': -- BEGIN PROG LOAD LOG --
Attaching fexit/fmod_ret to __noreturn function 'do_exit' is rejected.
Suggested-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250724151454.499040-2-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fLqm
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore:
"A single audit patch that restores logging of an audit event in the
module load failure case"
* tag 'audit-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,module: restore audit logging in load failure case
This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants. These APIs will allow further simplifications across the
kernel as users start using them instead of the old-school crypto API.
(I've already written a lot of such conversion patches, removing over
1000 more lines of code. But most of those will target 6.18 or later.)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ93BQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8HCAQD3O9P0qd6wscne5XuRwaybzKHQ2AqU
OlhlDZWQQEvYAgD/aa6KP/DS+8RKGj0TBn6bACAJyXyDygFXq5a5s9pGzAs=
=UmMM
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk
uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ
JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8=
=+5Bq
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
- Introduce regular REGSET note macros arch-wide (Dave Martin)
- Remove arbitrary 4K limitation of program header size (Yin Fengwei)
- Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIVKiAAKCRA2KwveOeQk
u4zBAP4zUNj2+XyixVPXCzv+Hkle6zWs7yrzdA2yLxe8Qtwj5AD+N2I6MUGcCFGW
W+uWxlWTtGLDqh1CplIUqTlxMi39Og4=
=vYnE
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Introduce regular REGSET note macros arch-wide (Dave Martin)
- Remove arbitrary 4K limitation of program header size (Yin Fengwei)
- Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)
* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
fork: reorder function qualifiers for copy_clone_args_from_user
binfmt_elf: remove the 4k limitation of program header size
binfmt_elf: Warn on missing or suspicious regset note names
xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
...
-----BEGIN PGP SIGNATURE-----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=e86T
-----END PGP SIGNATURE-----
Merge tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCjwAKCRCRxhvAZXjc
osnVAQCv4rM7sF4yJvGlm1myIJcJy5Sabk2q31qMdI1VHmkcOwD+Mxs7d1aByTS8
/6djhVleq6lcT2LpP9j8YI3Rb+x30QY=
=PF3o
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs bpf updates from Christian Brauner:
"These changes allow bpf to read extended attributes from cgroupfs.
This is useful in redirecting AF_UNIX socket connections based on
cgroup membership of the socket. One use-case is the ability to
implement log namespaces in systemd so services and containers are
redirected to different journals"
* tag 'vfs-6.17-rc1.bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/kernfs: test xattr retrieval
selftests/bpf: Add tests for bpf_cgroup_read_xattr
bpf: Mark cgroup_subsys_state->cgroup RCU safe
bpf: Introduce bpf_cgroup_read_xattr to read xattr of cgroup's node
kernfs: remove iattr_mutex
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCiQAKCRCRxhvAZXjc
orltAQDq3y1anYETz5/FD6P2gXY1W5hXdSm3EHHeacQ1JjTXvgEA2g1lWO7J4anf
oOVE8aSvMow/FOjivLZBYmI65pkYJAE=
=oDKB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
- persistent info
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid
is closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or
it might find a dead dentry in there and fail to reuse it and so
stashes a new pidfs dentry. Multiple tasks may race to stash a new
pidfs dentry but only one will succeed, the other ones will put their
dentry.
The current scheme aims to ensure that a pidfs dentry for a struct
pid can only be created if the task is still alive or if a pidfs
dentry already existed before the task was reaped and so exit
information has been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is
called we will return a pidfd for a reaped task without exit
information being available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might
be successful simply because we're before __unhash_process() but
after pidfs_exit().
Introduce a new scheme where the lifetime of information associated
with a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can
be cleaned up but the struct pidfs_attr will stick until the struct
pid itself is freed. This will ensure minimal memory usage while
persisting relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which
no exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries
when registering a struct pid with pidfs. There's no need to get or
put a reference. Instead, the lifetime of exit and coredump
information associated with a struct pid is bound to the lifetime of
struct pid itself.
- extended attributes
Now that we have a way to persist information for pidfs dentries we
can start supporting extended attributes on pidfds. This will allow
userspace to attach meta information to tasks.
One natural extension would be to introduce a custom pidfs.* extended
attribute space and allow for the inheritance of extended attributes
across fork() and exec().
The first simple scheme will allow privileged userspace to set
trusted extended attributes on pidfs inodes.
- Allow autonomous pidfs file handles
Various filesystems such as pidfs and drm support opening file
handles without having to require a file descriptor to identify the
filesystem. The filesystem are global single instances and can be
trivially identified solely on the information encoded in the file
handle.
This makes it possible to not have to keep or acquire a sentinal file
descriptor just to pass it to open_by_handle_at() to identify the
filesystem. That's especially useful when such sentinel file
descriptor cannot or should not be acquired.
For pidfs this means a file handle can function as full replacement
for storing a pid in a file. Instead a file handle can be stored and
reopened purely based on the file handle.
Such autonomous file handles can be opened with or without specifying
a a file descriptor. If no proper file descriptor is used the
FD_PIDFS_ROOT sentinel must be passed. This allows us to define
further special negative fd sentinels in the future.
Userspace can trivially test for support by trying to open the file
handle with an invalid file descriptor.
- Allow pidfds for reaped tasks with SCM_PIDFD messages
This is a logical continuation of the earlier work to create pidfds
for reaped tasks through the SO_PEERPIDFD socket option merged in
923ea4d448 ("Merge patch series "net, pidfs: enable handing out
pidfds for reaped sk->sk_peer_pid"").
- Two minor fixes:
* Fold fs_struct->{lock,seq} into a seqlock
* Don't bother with path_{get,put}() in unix_open_file()
* tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
don't bother with path_get()/path_put() in unix_open_file()
fold fs_struct->{lock,seq} into a seqlock
selftests: net: extend SCM_PIDFD test to cover stale pidfds
af_unix: enable handing out pidfds for reaped tasks in SCM_PIDFD
af_unix: stash pidfs dentry when needed
af_unix/scm: fix whitespace errors
af_unix: introduce and use scm_replace_pid() helper
af_unix: introduce unix_skb_to_scm helper
af_unix: rework unix_maybe_add_creds() to allow sleep
selftests/pidfd: decode pidfd file handles withou having to specify an fd
fhandle, pidfs: support open_by_handle_at() purely based on file handle
uapi/fcntl: add FD_PIDFS_ROOT
uapi/fcntl: add FD_INVALID
fcntl/pidfd: redefine PIDFD_SELF_THREAD_GROUP
uapi/fcntl: mark range as reserved
fhandle: reflow get_path_anchor()
pidfs: add pidfs_root_path() helper
fhandle: rename to get_path_anchor()
fhandle: hoist copy_from_user() above get_path_from_fd()
fhandle: raise FILEID_IS_DIR in handle_type
...
Add a per-cpu monitor as part of the sched model:
* opid: operations with preemption and irq disabled
Monitor to ensure wakeup and need_resched occur with irq and
preemption disabled or in irq handlers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add 2 per-task monitors as part of the sched model:
* nrp: need-resched preempts
Monitor to ensure preemption requires need resched.
* sssw: set state sleep and wakeup
Monitor to ensure sched_set_state to sleepable leads to sleeping and
sleeping tasks require wakeup.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Acked-by: Nam Cao <namcao@linutronix.de>
Tested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tss monitor currently guarantees task switches can happen only while
scheduling, whereas the sncid monitor enforces scheduling occurs with
interrupt disabled.
Replace the monitors with a more comprehensive specification which
implies both but also ensures that:
* each scheduler call disable interrupts to switch
* each task switch happens with interrupts disabled
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the following tracepoint:
* sched_set_need_resched(tsk, cpu, tif)
Called when a task is set the need resched [lazy] flag
Remove the unused ip parameter from sched_entry and sched_exit and alter
sched_entry to have a value of preempt consistent with the one used in
sched_switch.
Also adapt all monitors using sched_{entry,exit} to avoid breaking build.
These tracepoints are useful to describe the Linux task model and are
adapted from the patches by Daniel Bristot de Oliveira
(https://bristot.me/linux-task-model/).
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
DA monitor can be accessed from multiple cores simultaneously, this is
likely, for instance when dealing with per-task monitors reacting on
events that do not always occur on the CPU where the task is running.
This can cause race conditions where two events change the next state
and we see inconsistent values. E.g.:
[62] event_srs: 27: sleepable x sched_wakeup -> running (final)
[63] event_srs: 27: sleepable x sched_set_state_sleepable -> sleepable
[63] error_srs: 27: event sched_switch_suspend not expected in the state running
In this case the monitor fails because the event on CPU 62 wins against
the one on CPU 63, although the correct state should have been
sleepable, since the task get suspended.
Detect if the current state was modified by using try_cmpxchg while
storing the next value. If it was, try again reading the current state.
After a maximum number of failed retries, react by calling a special
tracepoint, print on the console and reset the monitor.
Remove the functions da_monitor_curr_state() and da_monitor_set_state()
as they only hide the underlying implementation in this case.
Monitors where this type of condition can occur must be able to account
for racing events in any possible order, as we cannot know the winner.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250728135022.255578-6-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
RV monitors relying on the preemptirqs tracepoints are set as dependent
on PREEMPT_TRACER and IRQSOFF_TRACER. In fact, those configurations do
enable the tracepoints but are not the minimal configurations enabling
them, which are TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS (not selectable
manually).
Set TRACE_PREEMPT_TOGGLE and TRACE_IRQFLAGS as dependencies for
monitors.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-5-gmonaco@redhat.com
Fixes: fbe6c09b7e ("rv: Add scpd, snep and sncid per-cpu monitors")
Acked-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Using DA monitors tracepoints with KASAN enabled triggers the following
warning:
BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
Read of size 32 at addr ffffffffaada8980 by task ...
Call Trace:
<TASK>
[...]
do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0
? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10
? trace_event_sncid+0x83/0x200
trace_event_sncid+0x163/0x200
[...]
The buggy address belongs to the variable:
automaton_snep+0x4e0/0x5e0
This is caused by the tracepoints reading 32 bytes __array instead of
__string from the automata definition. Such strings are literals and
reading 32 bytes ends up in out of bound memory accesses (e.g. the next
automaton's data in this case).
The error is harmless as, while printing the string, we stop at the null
terminator, but it should still be fixed.
Use the __string facilities while defining the tracepoints to avoid
reading out of bound memory.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-4-gmonaco@redhat.com
Fixes: 792575348f ("rv/include: Add deterministic automata monitor definition via C macros")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
RV event tracepoints print a line with the format:
"event_xyz: S0 x event -> S1 "
"event_xyz: S1 x event -> S0 (final)"
While printing an event leading to a non-final state, the line
has a trailing white space (visible above before the closing ").
Adapt the format string not to print the trailing whitespace if we are
not printing "(final)".
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250728135022.255578-3-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINAYAAKCRCRxhvAZXjc
opJiAQDXGs+gQcxJ+4BpV4QszT2OJC19oI/f5AQ4PWMJdHgr4AEA7fc6NbBrpmW7
L/tbdAwIiWp8bL1Q8Wy7Q2qldHtcggM=
=KbD9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This contains an extension to the coredump socket and a proper rework
of the coredump code.
- This extends the coredump socket to allow the coredump server to
tell the kernel how to process individual coredumps. This allows
for fine-grained coredump management. Userspace can decide to just
let the kernel write out the coredump, or generate the coredump
itself, or just reject it.
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when
userspace generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@"
prefix instead of the single "@" prefix for the regular coredump
socket:
@@/run/systemd/coredump.socket
- Cleanup the coredump code properly while we have to touch it
anyway.
Split out each coredump mode in a separate helper so it's easy to
grasp what is going on and make the code easier to follow. The core
coredump function should now be very trivial to follow"
* tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cleanup: add a scoped version of CLASS()
coredump: add coredump_skip() helper
coredump: avoid pointless variable
coredump: order auto cleanup variables at the top
coredump: add coredump_cleanup()
coredump: auto cleanup prepare_creds()
cred: add auto cleanup method
coredump: directly return
coredump: auto cleanup argv
coredump: add coredump_write()
coredump: use a single helper for the socket
coredump: move pipe specific file check into coredump_pipe()
coredump: split pipe coredumping into coredump_pipe()
coredump: move core_pipe_count to global variable
coredump: prepare to simplify exit paths
coredump: split file coredumping into coredump_file()
coredump: rename do_coredump() to vfs_coredump()
selftests/coredump: make sure invalid paths are rejected
coredump: validate socket path in coredump_parse()
coredump: don't allow ".." in coredump socket path
...
Commit d7f0087381 ("bpf: try harder to deduce register bounds from
different numeric domains") added a second call to __reg_deduce_bounds
in reg_bounds_sync because a single call wasn't enough to converge to a
fixed point in terms of register bounds.
With patch "bpf: Improve bounds when s64 crosses sign boundary" from
this series, Eduard noticed that calling __reg_deduce_bounds twice isn't
enough anymore to converge. The first selftest added in "selftests/bpf:
Test cross-sign 64bits range refinement" highlights the need for a third
call to __reg_deduce_bounds. After instruction 7, reg_bounds_sync
performs the following bounds deduction:
reg_bounds_sync entry: scalar(smin=-655,smax=0xeffffeee,smin32=-783,smax32=-146)
__update_reg_bounds: scalar(smin=-655,smax=0xeffffeee,smin32=-783,smax32=-146)
__reg_deduce_bounds:
__reg32_deduce_bounds: scalar(smin=-655,smax=0xeffffeee,smin32=-783,smax32=-146,umin32=0xfffffcf1,umax32=0xffffff6e)
__reg64_deduce_bounds: scalar(smin=-655,smax=0xeffffeee,smin32=-783,smax32=-146,umin32=0xfffffcf1,umax32=0xffffff6e)
__reg_deduce_mixed_bounds: scalar(smin=-655,smax=0xeffffeee,umin=umin32=0xfffffcf1,umax=0xffffffffffffff6e,smin32=-783,smax32=-146,umax32=0xffffff6e)
__reg_deduce_bounds:
__reg32_deduce_bounds: scalar(smin=-655,smax=0xeffffeee,umin=umin32=0xfffffcf1,umax=0xffffffffffffff6e,smin32=-783,smax32=-146,umax32=0xffffff6e)
__reg64_deduce_bounds: scalar(smin=-655,smax=smax32=-146,umin=0xfffffffffffffd71,umax=0xffffffffffffff6e,smin32=-783,umin32=0xfffffcf1,umax32=0xffffff6e)
__reg_deduce_mixed_bounds: scalar(smin=-655,smax=smax32=-146,umin=0xfffffffffffffd71,umax=0xffffffffffffff6e,smin32=-783,umin32=0xfffffcf1,umax32=0xffffff6e)
__reg_bound_offset: scalar(smin=-655,smax=smax32=-146,umin=0xfffffffffffffd71,umax=0xffffffffffffff6e,smin32=-783,umin32=0xfffffcf1,umax32=0xffffff6e,var_off=(0xfffffffffffffc00; 0x3ff))
__update_reg_bounds: scalar(smin=-655,smax=smax32=-146,umin=0xfffffffffffffd71,umax=0xffffffffffffff6e,smin32=-783,umin32=0xfffffcf1,umax32=0xffffff6e,var_off=(0xfffffffffffffc00; 0x3ff))
In particular, notice how:
1. In the first call to __reg_deduce_bounds, __reg32_deduce_bounds
learns new u32 bounds.
2. __reg64_deduce_bounds is unable to improve bounds at this point.
3. __reg_deduce_mixed_bounds derives new u64 bounds from the u32 bounds.
4. In the second call to __reg_deduce_bounds, __reg64_deduce_bounds
improves the smax and umin bounds thanks to patch "bpf: Improve
bounds when s64 crosses sign boundary" from this series.
5. Subsequent functions are unable to improve the ranges further (only
tnums). Yet, a better smin32 bound could be learned from the smin
bound.
__reg32_deduce_bounds is able to improve smin32 from smin, but for that
we need a third call to __reg_deduce_bounds.
As discussed in [1], there may be a better way to organize the deduction
rules to learn the same information with less calls to the same
functions. Such an optimization requires further analysis and is
orthogonal to the present patchset.
Link: https://lore.kernel.org/bpf/aIKtSK9LjQXB8FLY@mail.gmail.com/ [1]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/79619d3b42e5525e0e174ed534b75879a5ba15de.1753695655.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__reg64_deduce_bounds currently improves the s64 range using the u64
range and vice versa, but only if it doesn't cross the sign boundary.
This patch improves __reg64_deduce_bounds to cover the case where the
s64 range crosses the sign boundary but overlaps with the u64 range on
only one end. In that case, we can improve both ranges. Consider the
following example, with the s64 range crossing the sign boundary:
0 U64_MAX
| [xxxxxxxxxxxxxx u64 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s64 range xxxxxxxxx] [xxxxxxx|
0 S64_MAX S64_MIN -1
The u64 range overlaps only with positive portion of the s64 range. We
can thus derive the following new s64 and u64 ranges.
0 U64_MAX
| [xxxxxx u64 range xxxxx] |
|----------------------------|----------------------------|
| [xxxxxx s64 range xxxxx] |
0 S64_MAX S64_MIN -1
The same logic can probably apply to the s32/u32 ranges, but this patch
doesn't implement that change.
In addition to the selftests, the __reg64_deduce_bounds change was
also tested with Agni, the formal verification tool for the range
analysis [1].
Link: https://github.com/bpfverif/agni [1]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/933bd9ce1f36ded5559f92fdc09e5dbc823fa245.1753695655.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Argument 'p' of reactors_show() and monitor_reactor_show() is not a pointer
to struct rv_reactor, it is actually a pointer to the list_head inside
struct rv_reactor. Therefore it's wrong to cast 'p' to struct rv_reactor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_reactor_def.
This is no longer true since commit 3d3c376118 ("rv: Merge struct
rv_reactor_def into struct rv_reactor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/b4febbd6844311209e4c8768b65d508b81bd8c9b.1753625621.git.namcao@linutronix.de
Fixes: 3d3c376118 ("rv: Merge struct rv_reactor_def into struct rv_reactor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Argument 'p' of monitors_show() is not a pointer to struct rv_monitor, it
is actually a pointer to the list_head inside struct rv_monitor. Therefore
it is wrong to cast 'p' to struct rv_monitor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_monitor_def.
This is no longer true since commit 24cbfe18d5 ("rv: Merge struct
rv_monitor_def into struct rv_monitor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/35e49e97696007919ceacf73796487a2e15a3d02.1753625621.git.namcao@linutronix.de
Fixes: 24cbfe18d5 ("rv: Merge struct rv_monitor_def into struct rv_monitor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During the bounds refinement, we improve the precision of various ranges
by looking at other ranges. Among others, we improve the following in
this order (other things happen between 1 and 2):
1. Improve u32 from s32 in __reg32_deduce_bounds.
2. Improve s/u64 from u32 in __reg_deduce_mixed_bounds.
3. Improve s/u64 from s32 in __reg_deduce_mixed_bounds.
In particular, if the s32 range forms a valid u32 range, we will use it
to improve the u32 range in __reg32_deduce_bounds. In
__reg_deduce_mixed_bounds, under the same condition, we will use the s32
range to improve the s/u64 ranges.
If at (1) we were able to learn from s32 to improve u32, we'll then be
able to use that in (2) to improve s/u64. Hence, as (3) happens under
the same precondition as (1), it won't improve s/u64 ranges further than
(1)+(2) did. Thus, we can get rid of (3).
In addition to the extensive suite of selftests for bounds refinement,
this patch was also tested with the Agni formal verification tool [1].
Additionally, Eduard mentioned:
The argument appears to be as follows:
Under precondition `(u32)reg->s32_min <= (u32)reg->s32_max`
__reg32_deduce_bounds produces:
reg->u32_min = max_t(u32, reg->s32_min, reg->u32_min);
reg->u32_max = min_t(u32, reg->s32_max, reg->u32_max);
And then first part of __reg_deduce_mixed_bounds assigns:
a. reg->umin umax= (reg->umin & ~0xffffffffULL) | max_t(u32, reg->s32_min, reg->u32_min);
b. reg->umax umin= (reg->umax & ~0xffffffffULL) | min_t(u32, reg->s32_max, reg->u32_max);
And then second part of __reg_deduce_mixed_bounds assigns:
c. reg->umin umax= (reg->umin & ~0xffffffffULL) | (u32)reg->s32_min;
d. reg->umax umin= (reg->umax & ~0xffffffffULL) | (u32)reg->s32_max;
But assignment (c) is a noop because:
max_t(u32, reg->s32_min, reg->u32_min) >= (u32)reg->s32_min
Hence RHS(a) >= RHS(c) and umin= does nothing.
Also assignment (d) is a noop because:
min_t(u32, reg->s32_max, reg->u32_max) <= (u32)reg->s32_max
Hence RHS(b) <= RHS(d) and umin= does nothing.
Plus the same reasoning for the part dealing with reg->s{min,max}_value:
e. reg->smin_value smax= (reg->smin_value & ~0xffffffffULL) | max_t(u32, reg->s32_min_value, reg->u32_min_value);
f. reg->smax_value smin= (reg->smax_value & ~0xffffffffULL) | min_t(u32, reg->s32_max_value, reg->u32_max_value);
vs
g. reg->smin_value smax= (reg->smin_value & ~0xffffffffULL) | (u32)reg->s32_min_value;
h. reg->smax_value smin= (reg->smax_value & ~0xffffffffULL) | (u32)reg->s32_max_value;
RHS(e) >= RHS(g) and RHS(f) <= RHS(h), hence smax=,smin= do nothing.
This appears to be correct.
Also, Shung-Hsi:
Beside going through the reasoning, I also played with CBMC a bit to
double check that as far as a single run of __reg_deduce_bounds() is
concerned (and that the register state matches certain handwavy
expectations), the change indeed still preserve the original behavior.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://github.com/bpfverif/agni [1]
Link: https://lore.kernel.org/bpf/aIJwnFnFyUjNsCNa@mail.gmail.com
The rework of this mechanism added a 'use_nsec' member to struct
system_counterval. get_device_system_crosststamp() instantiates that
struct on the stack and hands a pointer to the driver callback.
Only the drivers which set use_nsec to true, initialize that field, but
all others ignore it. As get_device_system_crosststamp() does not
initialize the struct, the use_nsec field contains random stack content
in those cases. That causes a miscalulation usually resulting in a
failing range check in the best case.
Initialize the structure before handing it to the drivers to cure that.
-----BEGIN PGP SIGNATURE-----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=j6Po
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for the PTP systemcounter mechanism:
The rework of this mechanism added a 'use_nsec' member to struct
system_counterval. get_device_system_crosststamp() instantiates that
struct on the stack and hands a pointer to the driver callback.
Only the drivers which set use_nsec to true, initialize that field,
but all others ignore it. As get_device_system_crosststamp() does not
initialize the struct, the use_nsec field contains random stack
content in those cases. That causes a miscalulation usually resulting
in a failing range check in the best case.
Initialize the structure before handing it to the drivers to cure
that"
* tag 'timers-urgent-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Zero initialize system_counterval when querying time from phc drivers
Once CONFIG_KSTACK_ERASE is enabled with Clang on i386, the build warns:
kernel/kstack_erase.c:168:2: warning: function with attribute 'no_caller_saved_registers' should only call a function with attribute 'no_caller_saved_registers' or be compiled with '-mgeneral-regs-only' [-Wexcessive-regsave]
Add -mgeneral-regs-only for the kstack_erase handler, to make Clang feel
better (it is effectively a no-op flag for the kernel). No binary
changes encountered.
Build & boot tested with Clang 21 on x86_64, and i386.
Build tested with GCC 14.2.0 on x86_64, i386, arm64, and arm.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20250726004313.GA3650901@ax162
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
bpf_jit_get_prog_name() will be used by all JITs when enabling support
for private stack. This function is currently implemented in the x86
JIT.
Move the function to core.c so that other JITs can easily use it in
their implementation of private stack.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250724120257.7299-2-puranjay@kernel.org
The code is unused since 98e20e5e13 ("bpfilter: remove bpfilter"),
therefore remove it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/bpf/20250721-remove-usermode-driver-v1-2-0d0083334382@linutronix.de
The usermode driver framework is not used anymore by the BPF
preload code.
Fixes: cb80ddc671 ("bpf: Convert bpf_preload.ko to use light skeleton.")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/bpf/20250721-remove-usermode-driver-v1-1-0d0083334382@linutronix.de
The field 'reacting' in struct rv_monitor is set but never used. Delete it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/a6c16f845d2f1a09c4d0934ab83f3cb14478a71d.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
rv_reactor has a reference counter to ensure it is not removed while
monitors are still using it.
However, this is futile, as __exit functions are not expected to fail and
will proceed normally despite rv_unregister_reactor() returning an error.
At the moment, reactors do not support being built as modules, therefore
they are never removed and the reference counters are not necessary.
If we support building RV reactors as modules in the future, kernel
module's centralized facilities such as try_module_get(), module_put() or
MODULE_SOFTDEP should be used instead of this custom implementation.
Remove this reference counter.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/bb946398436a5e17fb0f5b842ef3313c02291852.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Each struct rv_reactor has a unique struct rv_reactor_def associated with
it. struct rv_reactor is statically allocated, while struct rv_reactor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_reactor_def from rv_reactor
- Dynamic memory allocation is required for rv_reactor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_reactor() does not free the memory
allocated by rv_register_reactor(). This is fortunately not a real
memory leak problem as rv_unregister_reactor() is never called.
Simplify and merge rv_reactor_def into rv_reactor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/71cb91c86cd40df5b8c492b788787f2a73c3eaa3.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Each struct rv_monitor has a unique struct rv_monitor_def associated with
it. struct rv_monitor is statically allocated, while struct rv_monitor_def
is dynamically allocated.
This makes the code more complicated than it should be:
- Lookup is required to get the associated rv_monitor_def from rv_monitor
- Dynamic memory allocation is required for rv_monitor_def. This is
harder to get right compared to static memory. For instance, there is
an existing mistake: rv_unregister_monitor() does not free the memory
allocated by rv_register_monitor(). This is fortunately not a real
memory leak problem, as rv_unregister_monitor() is never called.
Simplify and merge rv_monitor_def into rv_monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/194449c00f87945c207aab4c96920c75796a4f53.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
rv_monitor_def::task_monitor is not used. Delete it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/502d94f2696435690a2b1fdbe80a9e56c96fcabf.1753378331.git.namcao@linutronix.de
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
or aren't considered necessary for -stable kernels.
7 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaILYBgAKCRDdBJ7gKXxA
jo0uAQDvTlAjH6TcgRW/cbqHRIeiRoZ9Bwh/RUlJXM9neDR2LgEA41B+ohTsxUmZ
OhM3Ce94tiGrHnVlW3SsmVaO+1TjGAU=
=KUR9
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
Move multiple copies of same code snippet doing `gro_flush` and
`gro_normal_list` into separate helper function.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The trace event filter bootup self test tests a bunch of filter logic
against the ftrace_test_filter event, but does not actually call the
event. Work is being done to cause a warning if an event is defined but
not used. To quiet the warning call the trace event under an if statement
where it is disabled so it doesn't get optimized out.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas.schier@linux.dev>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250723194212.274458858@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaIJYlAAKCRAraS+Z+3y5
E5MFAQDW29BJyjRbB75oy6RxmFZX+xFmGgmy1XO3w822gIwgzQD/WzhsmFPDYv/F
7iOpLvez6zTySUdTJXJGCTvYJG5EHwU=
=U8S4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-07-24
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 4 files changed, 40 insertions(+), 15 deletions(-).
The main changes are:
1) Improved verifier error message for incorrect narrower load from
pointer field in ctx, from Paul Chaignon.
2) Disabled migration in nf_hook_run_bpf to address a syzbot report,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test invalid narrower ctx load
bpf: Reject narrower access to pointer ctx fields
bpf: Disable migration in nf_hook_run_bpf().
====================
Link: https://patch.msgid.link/20250724173306.3578483-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com
Fixes: 7dab174e2e ("dax/hmem: Move hmem device registration to dax_hmem.ko")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
WARNING: modpost: vmlinux: section mismatch in reference: xbc_exit+0x8 (section: .text.unlikely) -> _xbc_exit (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: real_mode_size_needed+0x15 (section: .text.unlikely) -> real_mode_blob_end (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: __set_percpu_decrypted+0x16 (section: .text.unlikely) -> early_set_memory_decrypted (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: memblock_alloc_from+0x26 (section: .text.unlikely) -> memblock_alloc_try_nid (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_set_root_pointer+0xc (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_get_root_pointer+0x8 (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: efi_config_table_is_usable+0x16 (section: .text.unlikely) -> xen_efi_config_table_is_usable (section: .init.text)
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For x86 this means forcing several functions to be inline with
__always_inline.
Link: https://lore.kernel.org/r/20250724055029.3623499-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Monitors generated with dot2k have their registration function (the one
called during monitor initialisation) return always 0, even if the
registration failed on RV side.
This can hide potential errors.
Return the value returned by the RV register function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-6-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The current behaviour of rvgen when running with the -a option is to
append the necessary lines at the end of the configuration for Kconfig,
Makefile and tracepoints.
This is not always the desired behaviour in case of nested monitors:
while tracepoints are not affected by nesting and the Makefile's only
requirement is that the parent monitor is built before its children, in
the Kconfig it is better to have children defined right after their
parent, otherwise the result has wrong indentation:
[*] foo_parent monitor
[*] foo_child1 monitor
[*] foo_child2 monitor
[*] bar_parent monitor
[*] bar_child1 monitor
[*] bar_child2 monitor
[*] foo_child3 monitor
[*] foo_child4 monitor
Adapt rvgen to look for a different marker for nested monitors in the
Kconfig file and append the line right after the last sibling, instead
of the last monitor.
Also add the marker when creating a new parent monitor.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-5-gmonaco@redhat.com
Reviewed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The dot2c.py script generates all states in a single line. This breaks the
100 column limit when the state machines are non-trivial.
Change dot2c.py to generate the states in separate lines in case the
generated line is going to be too long.
Also adapt existing monitors with line length over the limit.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Juri Lelli <jlelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250723161240.194860-4-gmonaco@redhat.com
Suggested-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
eprobes are dynamic events that can read other events using their fields
to create new events. Currently it doesn't work with arrays. When the new
event field is attached to the old event field, it looks at the size of
the field to determine what type of field the new field should be. For 1
byte fields it's a char, for 2 bytes, it's a short and for 4 bytes it's an
integer. For all other sizes it just defaults to "long". This also reads
the contents of the field for such cases.
For arrays that are bigger than the size of long, return the value of the
address of the content itself. This will allow eprobes to read other
values in the array of the old event.
This is useful when raw_syscalls is enabled but the syscall events are
not. The syscall events are created from the raw_syscalls as they have an
array of "args" that holds the 6 long words passed to the syscall entry
point. To read the value of "filename" from sys_openat, the eprobe could
attach to the raw_syscall and read the second value.
It can then even be passed to a synthetic event and converted back to
another eprobe to get the value of "filename" after it has been read by
the kernel during the system call:
[
Create an eprobe called "sys" and attach it to sys_enter.
Read the id of the system call and the second argument
]
# echo 'e:sys raw_syscalls.sys_enter nr=$id:u32 arg2=+8($args):u64' >> /sys/kernel/tracing/dynamic_events
[
Create a synthetic event "path" that will hold the address of the
sys_openat filename. This is on a 64bit machine, so make it 64 bits
]
# echo 's:path u64 file;' >> /sys/kernel/tracing/dynamic_events
[
Add a histogram to the eprobe/sys which tiggers if the "nr" field is
257 (sys_openat), and save the filename in the "file" variable.
]
# echo 'hist:keys=common_pid:file=arg2 if nr == 257' > /sys/kernel/tracing/events/eprobes/sys/trigger
[
Attach a histogram to sys_exit event that triggers the "path" synthetic
event and records the "filename" that was passed from the sys eprobe.
]
# echo 'hist:keys=common_pid:f=$file:onmatch(eprobes.sys).trace(path,$f)' >> /sys/kernel/tracing/events/raw_syscalls/sys_exit/trigger
[
Create another eprobe that dereferences the "file" field as a user
space string and displays it.
]
# echo 'e:open synthetic.path file=+0($file):ustring' >> /sys/kernel/tracing/dynamic_events
# echo 1 > /sys/kernel/tracing/events/eprobes/open/enable
# cat trace_pipe
cat-1142 [003] ...5. 799.521912: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.521934: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.522065: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.522080: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.522296: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
cat-1142 [003] ...5. 799.522319: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
less-1143 [005] ...5. 799.522327: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.522333: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
cat-1142 [003] ...5. 799.522348: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
less-1143 [005] ...5. 799.522349: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.522363: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
less-1143 [005] ...5. 799.522477: open: (synthetic.path) file="/etc/ld.so.cache"
cat-1142 [003] ...5. 799.522489: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
less-1143 [005] ...5. 799.522492: open: (synthetic.path) file="/etc/ld.so.cache"
less-1143 [005] ...5. 799.522720: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libtinfo.so.6"
less-1143 [005] ...5. 799.522744: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libtinfo.so.6"
less-1143 [005] ...5. 799.522759: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libtinfo.so.6"
cat-1142 [003] ...5. 799.522850: open: (synthetic.path) file="/lib/x86_64-linux-gnu/libc.so.6"
Link: https://lore.kernel.org/all/20250723124202.4f7475be@batman.local.home/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e38 ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list.
Fixes: f96da09473 ("bpf: simplify narrower ctx access")
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Reported-by: syzbot+0ef84a7bdf5301d4cbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0ef84a7bdf5301d4cbec
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/3b8dcee67ff4296903351a974ddd9c4dca768b64.1753194596.git.paul.chaignon@gmail.com
The ipi tracepoints are mostly generic, but the tracepoints ipi_raise,
ipi_entry and ipi_exit are only used by arm and arm64. This means these
trace events are wasting memory in all the other architectures that do not
use them.
Add CONFIG_HAVE_EXTRA_IPI_TRACEPOINTS and have arm and arm64 select it to
enable these trace events. The config makes it easy if other architectures
decide to trace these as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20250722103714.64eba013@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Since traceprobe_parse_event_name() is a bit complicated, add a
kerneldoc for explaining the behavior.
Link: https://lore.kernel.org/all/175323430565.57270.2602609519355112748.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Sort the #include directives in trace_probe* files alphabetically for
easier maintenance and avoid double includes.
This also groups headers as linux-generic, asm-generic, and local
headers.
Link: https://lore.kernel.org/all/175323424678.57270.11975372127870059007.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
In January 2015, tracefs was created to allow access to the tracing
infrastructure without needing to compile in debugfs. When tracefs is
configured, the directory /sys/kernel/tracing will exist and tooling is
expected to use that path to access the tracing infrastructure.
To allow backward compatibility, when debugfs is mounted, it would
automount tracefs in its "tracing" directory so that tooling that had hard
coded /sys/kernel/debug/tracing would still work.
It has been over 10 years since the new interface was introduced, and all
tooling should now be using it. Start the process of deprecating the old
path so that it doesn't need to be maintained anymore.
A new config is added to allow distributions to disable automounting of
tracefs on debugfs.
If /sys/kernel/debug/tracing is accessed, a pr_warn() will trigger stating:
"NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030"
Expect to remove this feature in 5 years (2030).
Cc: <linux-trace-users@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/20250722170806.40c068c6@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Renamed sysctl table from kern_table to sysctl_subsys_table and grouped
the two arch specific ctls to the end of the array.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Moved ctl_tables elements for overflowuid and overflowgid into in
kernel/sys.c. Create a register function that keeps them under "kernel"
and run it after core with postcore_initcall.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move both uevent_helper table into lib/kobject_uevent.c. Place the
registration early in the initcall order with postcore_initcall.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Remove the following headers from the include list in sysctl.c.
* These are removed as the related variables are no longer there.
=================== ====================
Include Related Var
=================== ====================
linux/kmod.h usermodehelper
asm/nmi.h nmi_watchdoc_enabled
asm/io.h io_delay_type
linux/pid.h pid_max_{,min,max}
linux/sched/sysctl.h sysctl_{sched_*,numa_*,timer_*}
linux/mount.h sysctl_mount_max
linux/reboot.h poweroff_cmd
linux/ratelimit.h {,printk_}ratelimit_state
linux/printk.h kptr_restrict
linux/security.h CONFIG_SECURITY_CAPABILITIES
linux/net.h net_table
linux/key.h key_sysctls
linux/nvs_fs.h acpi_video_flags
linux/acpi.h acpi_video_flags
linux/fs.h proc_nr_files
* These are no longer needed as intermediate includes
==============
Include
==============
linux/filter.h
linux/binfmts.h
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
These comments are older than 2003 and therefore do not bare any
relevance on the current state of the sysctl.c file. Remove them as they
confuse more than clarify.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move cad_pid as well as supporting function proc_do_cad_pid into
kernel/pic.c. Replaced call to __do_proc_dointvec with proc_dointvec
inside proc_do_cad_pid which requires the copy of the ctl_table to
handle the temp value.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move the ctl_table with the "tainted" proc_name into kernel/panic.c.
With it moves the proc_tainted helper function.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move both sysrq ctl_table and supported sysrq_sysctl_handler helper
function into drivers/tty/sysrq.c. Replaced the __do_proc_dointvec in
helper function with do_proc_dointvec_minmax as the former is local to
kernel/sysctl.c. Here we use the minmax version of do_proc_dointvec
because do_proc_dointvec is static and calling do_proc_dointvec_minmax
with a NULL min and max is the same as calling do_proc_dointvec.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
make sysctl_max_threads static as it no longer needs to be exported into
sysctl.c.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move the soft-power ctl table into parisc/power.c. As a consequence the
pwrsw_enabled var is made static.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move the randomize_va_space variable together with all its sysctl table
elements into memory.c. Register it to the "kernel" directory by
adding it to the subsys initialization calls
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move sysctl_panic_on_rcu_stall and sysctl_max_rcu_stall_to_panic into
the kernel/rcu subdirectory. Make these static in tree_stall.h and
removed them as extern from panic.h as their scope is now confined into
one file.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move the max_lock_depth sysctl table element into rtmutex_api.c. Removed
the rtmutex.h include from sysctl.c. Chose to move into rtmutex_api.c
to avoid multiple registrations every time rtmutex.c is included in other
files.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Move module sysctl (modprobe_path and modules_disabled) out of sysctl.c
and into the modules subsystem. Make modules_disabled static as it no
longer needs to be exported. Remove module.h from the includes in sysctl
as it no longer uses any module exported variables.
This is part of a greater effort to move ctl tables into their
respective subsystems which will reduce the merge conflicts in
kernel/sysctl.c.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Newer compiler versions rightfully point out:
kernel/kcsan/kcsan_test.c:591:41: error: variable 'dummy' is
uninitialized when passed as a const pointer argument here
[-Werror,-Wuninitialized-const-pointer]
591 | KCSAN_EXPECT_READ_BARRIER(atomic_read(&dummy), false);
| ^~~~~
1 error generated.
Although this particular test does not care about the value stored in
the dummy atomic variable, let's silence the warning.
Link: https://lkml.kernel.org/r/CA+G9fYu8JY=k-r0hnBRSkQQrFJ1Bz+ShdXNwC1TNeMt0eXaxeA@mail.gmail.com
Fixes: 8bc32b3481 ("kcsan: test: Add test cases for memory barrier instrumentation")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Ftrace is tightly coupled with architecture specific code because it
requires the use of trampolines written in assembly. This means that when
a new feature or optimization is made, it must be done for all
architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are
added to denote which architecture has the new enhancement so that other
architectures can still function until they too have been updated.
The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the
DYNAMIC_FTRACE work, but now every architecture that implements
DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant
with the HAVE_DYNAMIC_FTRACE.
Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where
applicable.
Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When soft disabling of trace events was first created, it needed to have a
way to know if a file had a user that was using it with soft disabled (for
triggers that need to enable or disable events from a context that can not
really enable or disable the event, it would set SOFT_DISABLED to state it
is disabled). The flag SOFT_MODE was used to denote that an event had a
user that would enable or disable it via the SOFT_DISABLED flag.
Commit 1cf4c0732d ("tracing: Modify soft-mode only if there's no other
referrer") fixed a bug where if two users were using the SOFT_DISABLED
flag the accounting would get messed up as the SOFT_MODE flag could only
handle one user. That commit added the sm_ref counter which kept track of
how many users were using the event in "soft mode". This made the
SOFT_MODE flag redundant as it should only be set if the sm_ref counter is
non zero.
Remove the SOFT_MODE flag and just use the sm_ref counter to know the
event is in soft mode or not. This makes the code a bit simpler.
Link: https://lore.kernel.org/all/20250702111908.03759998@batman.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Link: https://lore.kernel.org/20250702143657.18dd1882@batman.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Memory barriers are useful to ensure memory accesses from one CPU appear in
the original order as seen by other CPUs.
Some smp_rmb() and smp_wmb() are used, but they are not ordering multiple
memory accesses.
Remove them.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250626151940.1756398-1-namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ftrace has two flavors:
1) static: Where every function always calls the ftrace trampoline
2) dynamic: Where each function has nops that can be changed on demand to
jump to the ftrace trampoline when needed.
The static flavor has very high performance overhead and was only created
to make it easier for architectures to implement the dynamic flavor. An
architecture developer can first implement the static ftrace to make sure
the trampolines work before working on the more complicated dynamic aspect
of ftrace. Once the architecture can support dynamic ftrace, there's no
reason to continue to support the static flavor. In fact, the static
flavor tends to bitrot and bugs start to appear in them.
Remove the prompt to pick DYNAMIC_FTRACE and simply enable it if the
architecture supports it.
Link: https://lore.kernel.org/all/f7e12c6d-892e-4ca3-9ef0-fbb524d04a48@ghiti.fr/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: ChenMiao <chenmiao.ku@gmail.com>
Link: https://lore.kernel.org/20250703115222.2d7c8cd5@batman.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a warning if unregister_ftrace_graph() is called without ever
registering it, or if register_ftrace_graph() is called twice. This can
detect errors when they happen and not later when there's a side effect:
Link: https://lore.kernel.org/all/20250617120830.24fbdd62@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250701194451.22e34724@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the ring buffer was first introduced, reading the non-consuming
"trace" file required disabling the writing of the ring buffer. To make
sure the writing was fully disabled before iterating the buffer with a
non-consuming read, it would set the disable flag of the buffer and then
call an RCU synchronization to make sure all the buffers were
synchronized.
The function ring_buffer_read_start() originally would initialize the
iterator and call an RCU synchronization, but this was for each individual
per CPU buffer where this would get called many times on a machine with
many CPUs before the trace file could be read. The commit 72c9ddfd4c
("ring-buffer: Make non-consuming read less expensive with lots of cpus.")
separated ring_buffer_read_start into ring_buffer_read_prepare(),
ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of
the per CPU buffers to be prepared, call the read_buffer_read_sync() once,
and then the ring_buffer_read_start() for each of the CPUs which made
things much faster.
The commit 1039221cc2 ("ring-buffer: Do not disable recording when there
is an iterator") removed the requirement of disabling the recording of the
ring buffer in order to iterate it, but it did not remove the
synchronization that was happening that was required to wait for all the
buffers to have no more writers. It's now OK for the buffers to have
writers and no synchronization is needed.
Remove the synchronization and put back the interface for the ring buffer
iterator back before commit 72c9ddfd4c was applied.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home
Reported-by: David Howells <dhowells@redhat.com>
Fixes: 1039221cc2 ("ring-buffer: Do not disable recording when there is an iterator")
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It appears that the defect outlined in 9c15eeb536 ("genirq: Allow
fasteoi handler to resend interrupts on concurrent handling") also
affects some other less stellar MSI controllers, this time using
the handle_simple_irq() flow.
Teach this flow about irqd_needs_resend_when_in_progress(). Given
the invasive nature of this workaround, only this flow is updated.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250708173404.1278635-2-maz@kernel.org
Yicon reported and Liangyan debugged a live lock in handle_edge_irq()
related to interrupt migration.
If the interrupt affinity is moved to a new target CPU and the interrupt is
currently handled on the previous target CPU for edge type interrupts the
handler might get stuck on the previous target:
CPU 0 (previous target) CPU 1 (new target)
handle_edge_irq()
repeat:
handle_event() handle_edge_irq()
if (INPROGESS) {
set(PENDING);
mask();
return;
}
if (PENDING) {
clear(PENDING);
unmask();
goto repeat;
}
The migration in software never completes and CPU0 continues to handle the
pending events forever. This happens when the device raises interrupts with
a high rate and always before handle_event() completes and before the CPU0
handler can clear INPROGRESS so that CPU1 sets the PENDING flag over and
over. This has been observed in virtual machines.
Prevent this by checking whether the CPU which observes the INPROGRESS flag
is the new affinity target. If that's the case, do not set the PENDING flag
and wait for the INPROGRESS flag to be cleared instead, so that the new
interrupt is handled on the new target CPU and the previous CPU is released
from the action.
This is restricted to the edge type handler and only utilized on systems,
which use single CPU targets for interrupt affinity.
Reported-by: Yicong Shen <shenyicong.1023@bytedance.com>
Reported-by: Liangyan <liangyan.peng@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250701163558.2588435-1-liangyan.peng@bytedance.com
Link: https://lore.kernel.org/all/20250718185312.076515034@linutronix.de
Let the calling code check for the IRQD_WAKEUP_ARMED flag to prepare for a
live lock mitigation in the edge type handler.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Link: https://lore.kernel.org/all/20250718185312.012392426@linutronix.de
Move it to the call site so that the waiting for the INPROGRESS flag can be
reused by an upcoming mitigation for a potential live lock in the edge type
handler.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250718185311.948555026@linutronix.de
The variable is only used at one place, which can simply take the constant
as function argument.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Link: https://lore.kernel.org/all/20250718185311.884314473@linutronix.de
Most drivers only populate the fields cycles and cs_id of system_counterval
in their get_time_fn() callback for get_device_system_crosststamp(), unless
they explicitly provide nanosecond values.
When the use_nsecs field was added to struct system_counterval, most
drivers did not care. Clock sources other than CSID_GENERIC could then get
converted in convert_base_to_cs() based on an uninitialized use_nsecs field,
which usually results in -EINVAL during the following range check.
Pass in a fully zero initialized system_counterval_t to cure that.
Fixes: 6b2e299775 ("timekeeping: Provide infrastructure for converting to/from a base clock")
Signed-off-by: Markus Blöchl <markus@blochl.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250720-timekeeping_uninit_crossts-v2-1-f513c885b7c2@blochl.de
The synchronization of CPU offlining with GP initialization is confusing
to put it mildly (rightfully so as the issue it deals with is complex).
Recent discussions brought up a question -- what prevents the
rcu_implicit_dyntick_qs() from warning about QS reports for offline
CPUs (missing QS reports for offline CPUs causing indefinite hangs).
QS reporting for now-offline CPUs should only happen from:
- gp_init()
- rcutree_cpu_report_dead()
Add some documentation on this and refer to it from comments in the code
explaining how QS reporting is not missed when these functions are
concurrently running.
I referred heavily to this post [1] about the need for the ofl_lock.
[1] https://lore.kernel.org/all/20180924164443.GF4222@linux.ibm.com/
[ Applied paulmck feedback on moving documentation to Requirements.rst ]
Link: https://lore.kernel.org/all/01b4d228-9416-43f8-a62e-124b92e8741a@paulmck-laptop/
Co-developed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
The details of this are subtle and was discussed recently. Add a
quick-quiz about this and refer to it from the code, for more clarity.
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Add detailed comments explaining the critical ordering constraints
during RCU grace period initialization, based on discussions with
Frederic.
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
To reduce stale data lifetimes, enable CONFIG_INIT_ON_FREE_DEFAULT_ON as
well. This matches the addition of CONFIG_STACKLEAK=y, which is doing
similar for stack memory.
Link: https://lore.kernel.org/r/20250717232519.2984886-13-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The Clang stack depth tracking implementation has a fixed name for
the stack depth tracking callback, "__sanitizer_cov_stack_depth", so
rename the GCC plugin function to match since the plugin has no external
dependencies on naming.
Link: https://lore.kernel.org/r/20250717232519.2984886-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Intel linux test robot reported a warning that ERR_CAST can be used
for error pointer casting instead of more-complicated/rarely-used
ERR_PTR(PTR_ERR(...)) style.
There is no functionality change, but still let us replace two such
instances as it improves consistency and readability.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507201048.bceHy8zX-lkp@intel.com/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250720164754.3999140-1-yonghong.song@linux.dev
As the trace event powernv_throttle is only used by the powernv code, move
it to a separate include file and have that code directly enable it.
Trace events can take up around 5K of memory when they are defined
regardless if they are used or not. It wastes memory to have them defined
in configurations where the tracepoint is not used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/20250612145407.906308844@goodmis.org
Fixes: 0306e481d4 ("cpufreq: powernv/tracing: Add powernv_throttle tracepoint")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
All architectures have an interruptible RCU extended quiescent state
(EQS) as part of their idle sequences, where interrupts can occur
without RCU watching. Entry code must account for this and wake RCU as
necessary; the common entry code deals with this in irqentry_enter() by
treating any interrupt from an idle thread as potentially having
occurred within an EQS and waking RCU for the duration of the interrupt
via rcu_irq_enter() .. rcu_irq_exit().
Some architectures may have other interruptible EQSs which require
similar treatment. For example, on s390 it is necessary to enable
interrupts around guest entry in the middle of a period where core KVM
code has entered an EQS.
So that architectures can wake RCU in these cases, this patch adds a
new arch_in_rcu_eqs() hook to the common entry code which is checked in
addition to the existing is_idle_thread() check, with RCU woken if
either returns true. A default implementation is provided which always
returns false, which suffices for most architectures.
As no architectures currently implement arch_in_rcu_eqs(), there should
be no functional change as a result of this patch alone. A subsequent
patch will add an s390 implementation to fix a latent bug with missing
RCU wakeups.
[ajd@linux.ibm.com: rebase, fix commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20250708092742.104309-2-ajd@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250708092742.104309-2-ajd@linux.ibm.com>
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm its held when iterating the list.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaH06gBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoJsAP0a+/E0f+5g7O/OtYPVEDSCREv1vj9c
3dr0iWopqaOC7gEAw8Vc5iWIHKcB/JuJ+GqALoutL+lihruG26MWkFFsOgU=
=zH5J
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix timerlat with use of FORTIFY_SOURCE
FORTIFY_SOURCE was added to the stack tracer where it compares the
entry->caller array to having entry->size elements.
timerlat has the following:
memcpy(&entry->caller, fstack->calls, size);
entry->size = size;
Which triggers FORTIFY_SOURCE as the caller is populated before the
entry->size is initialized.
Swap the order to satisfy FORTIFY_SOURCE logic.
- Add down_write(trace_event_sem) when adding trace events in modules
Trace events being added to the ftrace_events array are protected by
the trace_event_sem semaphore. But when loading modules that have
trace events, the addition of the events are not protected by the
semaphore and loading two modules that have events at the same time
can corrupt the list.
Also add a lockdep_assert_held(trace_event_sem) to
_trace_add_event_dirs() to confirm it is held when iterating the
list.
* tag 'trace-v6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add down_write(trace_event_sem) when adding trace event
tracing/osnoise: Fix crash in timerlat_dump_stack()
counter nr_uninterruptible to an unsigned int. Due to the fact that the
counters are not updated on migration of a uninterruptble task to a
different CPU, these counters can exceed INT_MAX. The counter is cast to
long in the load average calculation, which means that the cast expands
into negative space resulting in bogus load average values. Convert it back
to unsigned long to fix this.
-----BEGIN PGP SIGNATURE-----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=Aqcr
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the scheduler.
A recent commit changed the runqueue counter nr_uninterruptible to an
unsigned int. Due to the fact that the counters are not updated on
migration of a uninterruptble task to a different CPU, these counters
can exceed INT_MAX.
The counter is cast to long in the load average calculation, which
means that the cast expands into negative space resulting in bogus
load average values.
Convert it back to unsigned long to fix this.
* tag 'sched-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Change nr_uninterruptible type to unsigned long
Inspired by mutex blocker tracking[1], and having already extended it to
semaphores, let's now add support for reader-writer semaphores (rwsems).
The approach is simple: when a task enters TASK_UNINTERRUPTIBLE while
waiting for an rwsem, we just call hung_task_set_blocker(). The hung task
detector can then query the rwsem's owner to identify the lock holder.
Tracking works reliably for writers, as there can only be a single writer
holding the lock, and its task struct is stored in the owner field.
The main challenge lies with readers. The owner field points to only one
of many concurrent readers, so we might lose track of the blocker if that
specific reader unlocks, even while others remain. This is not a
significant issue, however. In practice, long-lasting lock contention is
almost always caused by a writer. Therefore, reliably tracking the writer
is the primary goal of this patch series ;)
With this change, the hung task detector can now show blocker task's info
like below:
[Fri Jun 27 15:21:34 2025] INFO: task cat:28631 blocked for more than 122 seconds.
[Fri Jun 27 15:21:34 2025] Tainted: G S 6.16.0-rc3 #8
[Fri Jun 27 15:21:34 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Fri Jun 27 15:21:34 2025] task:cat state:D stack:0 pid:28631 tgid:28631 ppid:28501 task_flags:0x400000 flags:0x00004000
[Fri Jun 27 15:21:34 2025] Call Trace:
[Fri Jun 27 15:21:34 2025] <TASK>
[Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930
[Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? policy_nodemask+0x215/0x340
[Fri Jun 27 15:21:34 2025] ? _raw_spin_lock_irq+0x8a/0xe0
[Fri Jun 27 15:21:34 2025] ? __pfx__raw_spin_lock_irq+0x10/0x10
[Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180
[Fri Jun 27 15:21:34 2025] schedule_preempt_disabled+0x15/0x30
[Fri Jun 27 15:21:34 2025] rwsem_down_read_slowpath+0x55e/0xe10
[Fri Jun 27 15:21:34 2025] ? __pfx_rwsem_down_read_slowpath+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __pfx___might_resched+0x10/0x10
[Fri Jun 27 15:21:34 2025] down_read+0xc9/0x230
[Fri Jun 27 15:21:34 2025] ? __pfx_down_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __debugfs_file_get+0x14d/0x700
[Fri Jun 27 15:21:34 2025] ? __pfx___debugfs_file_get+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? handle_pte_fault+0x52a/0x710
[Fri Jun 27 15:21:34 2025] ? selinux_file_permission+0x3a9/0x590
[Fri Jun 27 15:21:34 2025] read_dummy_rwsem_read+0x4a/0x90
[Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0
[Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410
[Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50
[Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0
[Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0
[Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0
[Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f3f8faefb40
[Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffdeda5ab98 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f3f8faefb40
[Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 00000000010fa000 RDI: 0000000000000003
[Fri Jun 27 15:21:34 2025] RBP: 00000000010fa000 R08: 0000000000000000 R09: 0000000000010fff
[Fri Jun 27 15:21:34 2025] R10: 00007ffdeda59fe0 R11: 0000000000000246 R12: 00000000010fa000
[Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff
[Fri Jun 27 15:21:34 2025] </TASK>
[Fri Jun 27 15:21:34 2025] INFO: task cat:28631 <reader> blocked on an rw-semaphore likely owned by task cat:28630 <writer>
[Fri Jun 27 15:21:34 2025] task:cat state:S stack:0 pid:28630 tgid:28630 ppid:28501 task_flags:0x400000 flags:0x00004000
[Fri Jun 27 15:21:34 2025] Call Trace:
[Fri Jun 27 15:21:34 2025] <TASK>
[Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930
[Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __mod_timer+0x304/0xa80
[Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180
[Fri Jun 27 15:21:34 2025] schedule_timeout+0xfb/0x230
[Fri Jun 27 15:21:34 2025] ? __pfx_schedule_timeout+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __pfx_process_timeout+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? down_write+0xc4/0x140
[Fri Jun 27 15:21:34 2025] msleep_interruptible+0xbe/0x150
[Fri Jun 27 15:21:34 2025] read_dummy_rwsem_write+0x54/0x90
[Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0
[Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410
[Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50
[Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0
[Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0
[Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0
[Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f8f288efb40
[Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffffb631038 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f8f288efb40
[Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 000000002a4b5000 RDI: 0000000000000003
[Fri Jun 27 15:21:34 2025] RBP: 000000002a4b5000 R08: 0000000000000000 R09: 0000000000010fff
[Fri Jun 27 15:21:34 2025] R10: 00007ffffb630460 R11: 0000000000000246 R12: 000000002a4b5000
[Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff
[Fri Jun 27 15:21:34 2025] </TASK>
[1] https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com/
Link: https://lkml.kernel.org/r/20250627072924.36567-3-lance.yang@linux.dev
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: Zi Li <zi.li@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "extend hung task blocker tracking to rwsems".
Inspired by mutex blocker tracking[1], and having already extended it to
semaphores, let's now add support for reader-writer semaphores (rwsems).
The approach is simple: when a task enters TASK_UNINTERRUPTIBLE while
waiting for an rwsem, we just call hung_task_set_blocker(). The hung task
detector can then query the rwsem's owner to identify the lock holder.
Tracking works reliably for writers, as there can only be a single writer
holding the lock, and its task struct is stored in the owner field.
The main challenge lies with readers. The owner field points to only one
of many concurrent readers, so we might lose track of the blocker if that
specific reader unlocks, even while others remain. This is not a
significant issue, however. In practice, long-lasting lock contention is
almost always caused by a writer. Therefore, reliably tracking the writer
is the primary goal of this patch series ;)
With this change, the hung task detector can now show blocker task's info
like below:
[Fri Jun 27 15:21:34 2025] INFO: task cat:28631 blocked for more than 122 seconds.
[Fri Jun 27 15:21:34 2025] Tainted: G S 6.16.0-rc3 #8
[Fri Jun 27 15:21:34 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Fri Jun 27 15:21:34 2025] task:cat state:D stack:0 pid:28631 tgid:28631 ppid:28501 task_flags:0x400000 flags:0x00004000
[Fri Jun 27 15:21:34 2025] Call Trace:
[Fri Jun 27 15:21:34 2025] <TASK>
[Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930
[Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? policy_nodemask+0x215/0x340
[Fri Jun 27 15:21:34 2025] ? _raw_spin_lock_irq+0x8a/0xe0
[Fri Jun 27 15:21:34 2025] ? __pfx__raw_spin_lock_irq+0x10/0x10
[Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180
[Fri Jun 27 15:21:34 2025] schedule_preempt_disabled+0x15/0x30
[Fri Jun 27 15:21:34 2025] rwsem_down_read_slowpath+0x55e/0xe10
[Fri Jun 27 15:21:34 2025] ? __pfx_rwsem_down_read_slowpath+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __pfx___might_resched+0x10/0x10
[Fri Jun 27 15:21:34 2025] down_read+0xc9/0x230
[Fri Jun 27 15:21:34 2025] ? __pfx_down_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __debugfs_file_get+0x14d/0x700
[Fri Jun 27 15:21:34 2025] ? __pfx___debugfs_file_get+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? handle_pte_fault+0x52a/0x710
[Fri Jun 27 15:21:34 2025] ? selinux_file_permission+0x3a9/0x590
[Fri Jun 27 15:21:34 2025] read_dummy_rwsem_read+0x4a/0x90
[Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0
[Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410
[Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50
[Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0
[Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0
[Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0
[Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f3f8faefb40
[Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffdeda5ab98 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f3f8faefb40
[Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 00000000010fa000 RDI: 0000000000000003
[Fri Jun 27 15:21:34 2025] RBP: 00000000010fa000 R08: 0000000000000000 R09: 0000000000010fff
[Fri Jun 27 15:21:34 2025] R10: 00007ffdeda59fe0 R11: 0000000000000246 R12: 00000000010fa000
[Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff
[Fri Jun 27 15:21:34 2025] </TASK>
[Fri Jun 27 15:21:34 2025] INFO: task cat:28631 <reader> blocked on an rw-semaphore likely owned by task cat:28630 <writer>
[Fri Jun 27 15:21:34 2025] task:cat state:S stack:0 pid:28630 tgid:28630 ppid:28501 task_flags:0x400000 flags:0x00004000
[Fri Jun 27 15:21:34 2025] Call Trace:
[Fri Jun 27 15:21:34 2025] <TASK>
[Fri Jun 27 15:21:34 2025] __schedule+0x7c7/0x1930
[Fri Jun 27 15:21:34 2025] ? __pfx___schedule+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __mod_timer+0x304/0xa80
[Fri Jun 27 15:21:34 2025] schedule+0x6a/0x180
[Fri Jun 27 15:21:34 2025] schedule_timeout+0xfb/0x230
[Fri Jun 27 15:21:34 2025] ? __pfx_schedule_timeout+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? __pfx_process_timeout+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? down_write+0xc4/0x140
[Fri Jun 27 15:21:34 2025] msleep_interruptible+0xbe/0x150
[Fri Jun 27 15:21:34 2025] read_dummy_rwsem_write+0x54/0x90
[Fri Jun 27 15:21:34 2025] full_proxy_read+0xff/0x1c0
[Fri Jun 27 15:21:34 2025] ? rw_verify_area+0x6d/0x410
[Fri Jun 27 15:21:34 2025] vfs_read+0x177/0xa50
[Fri Jun 27 15:21:34 2025] ? __pfx_vfs_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] ? fdget_pos+0x1cf/0x4c0
[Fri Jun 27 15:21:34 2025] ksys_read+0xfc/0x1d0
[Fri Jun 27 15:21:34 2025] ? __pfx_ksys_read+0x10/0x10
[Fri Jun 27 15:21:34 2025] do_syscall_64+0x66/0x2d0
[Fri Jun 27 15:21:34 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Fri Jun 27 15:21:34 2025] RIP: 0033:0x7f8f288efb40
[Fri Jun 27 15:21:34 2025] RSP: 002b:00007ffffb631038 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Fri Jun 27 15:21:34 2025] RAX: ffffffffffffffda RBX: 0000000000010000 RCX: 00007f8f288efb40
[Fri Jun 27 15:21:34 2025] RDX: 0000000000010000 RSI: 000000002a4b5000 RDI: 0000000000000003
[Fri Jun 27 15:21:34 2025] RBP: 000000002a4b5000 R08: 0000000000000000 R09: 0000000000010fff
[Fri Jun 27 15:21:34 2025] R10: 00007ffffb630460 R11: 0000000000000246 R12: 000000002a4b5000
[Fri Jun 27 15:21:34 2025] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff
[Fri Jun 27 15:21:34 2025] </TASK>
This patch (of 3):
In preparation for extending blocker tracking to support rwsems, make the
rwsem_owner() and is_rwsem_reader_owned() helpers globally available for
determining if the blocker is a writer or one of the readers.
Additionally, a stale owner pointer in a reader-owned rwsem can lead to
false positives in blocker tracking when CONFIG_DETECT_HUNG_TASK_BLOCKER
is enabled. To mitigate this, clear the owner field on the reader unlock
path, similar to what CONFIG_DEBUG_RWSEMS does. A NULL owner is better
than a stale one for diagnostics.
Link: https://lkml.kernel.org/r/20250627072924.36567-1-lance.yang@linux.dev
Link: https://lkml.kernel.org/r/20250627072924.36567-2-lance.yang@linux.dev
Link: https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com/ [1]
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: Zi Li <zi.li@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a dedicated core parameter 'panic_console_replay' for controlling
console replay, and add note that 'panic_print' sysctl interface will be
obsoleted by 'panic_sys_info' and 'panic_console_replay'. When it
happens, the SYS_INFO_PANIC_CONSOLE_REPLAY can be removed as well.
Link: https://lkml.kernel.org/r/20250703021004.42328-6-feng.tang@linux.alibaba.com
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bitmap definition for 'panic_print' is hard to remember and decode. Add
'panic_sys_info='sysctl to take human readable string like
"tasks,mem,timers,locks,ftrace,..." and translate it into bitmap.
The detailed mapping is:
SYS_INFO_TASKS "tasks"
SYS_INFO_MEM "mem"
SYS_INFO_TIMERS "timers"
SYS_INFO_LOCKS "locks"
SYS_INFO_FTRACE "ftrace"
SYS_INFO_ALL_CPU_BT "all_bt"
SYS_INFO_BLOCKED_TASKS "blocked_tasks"
[nathan@kernel.org: add __maybe_unused to sys_info_avail]
Link: https://lkml.kernel.org/r/20250708-fix-clang-sys_info_avail-warning-v1-1-60d239eacd64@kernel.org
Link: https://lkml.kernel.org/r/20250703021004.42328-4-feng.tang@linux.alibaba.com
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'panic_print' was introduced to help debugging kernel panic by dumping
different kinds of system information like tasks' call stack, memory,
ftrace buffer, etc. Actually this function could also be used to help
debugging other cases like task-hung, soft/hard lockup, etc. where user
may need the snapshot of system info at that time.
Extract system info dump function related code from panic.c to separate
file sys_info.[ch], for wider usage by other kernel parts for debugging.
Also modify the macro names about singulars/plurals.
Link: https://lkml.kernel.org/r/20250703021004.42328-3-feng.tang@linux.alibaba.com
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "generalize panic_print's dump function to be used by other
kernel parts", v3.
When working on kernel stability issues, panic, task-hung and
software/hardware lockup are frequently met. And to debug them, user may
need lots of system information at that time, like task call stacks, lock
info, memory info etc.
panic case already has panic_print_sys_info() for this purpose, and has a
'panic_print' bitmask to control what kinds of information is needed,
which is also helpful to debug other task-hung and lockup cases.
So this patchset extracts the function out to a new file 'lib/sys_info.c',
and makes it available for other cases which also need to dump system info
for debugging.
Also as suggested by Petr Mladek, add 'panic_sys_info=' interface to take
human readable string like "tasks,mem,locks,timers,ftrace,....", and
eventually obsolete the current 'panic_print' bitmap interface.
In RFC and V1 version, hung_task and SW/HW watchdog modules are enabled
with the new sys_info dump interface. In v2, they are kept out for better
review of current change, and will be posted later.
Locally these have been used in our bug chasing for stability issues and
was proven helpful.
Many thanks to Petr Mladek for great suggestions on both the code and
architectures!
This patch (of 5):
Currently the panic_print_sys_info() was called twice with different
parameters to handle console replay case, which is kind of confusing.
Add panic_console_replay() explicitly and rename
'PANIC_PRINT_ALL_PRINTK_MSG' to 'PANIC_CONSOLE_REPLAY', to make the code
straightforward. The related kernel document is also updated.
Link: https://lkml.kernel.org/r/20250703021004.42328-1-feng.tang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20250703021004.42328-2-feng.tang@linux.alibaba.com
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When re-using the CMA area for kdump there is a risk of pending DMA into
pinned user pages in the CMA area.
Pages residing in CMA areas can usually not get long-term pinned and are
instead migrated away from the CMA area, so long-term pinning is typically
not a concern. (BUGs in the kernel might still lead to long-term pinning
of such pages if everything goes wrong.)
Pages pinned without FOLL_LONGTERM remain in the CMA and may possibly be
the source or destination of a pending DMA transfer.
Although there is no clear specification how long a page may be pinned
without FOLL_LONGTERM, pinning without the flag shows an intent of the
caller to only use the memory for short-lived DMA transfers, not a
transfer initiated by a device asynchronously at a random time in the
future.
Add a delay of CMA_DMA_TIMEOUT_SEC seconds before starting the kdump
kernel, giving such short-lived DMA transfers time to finish before the
CMA memory is re-used by the kdump kernel.
Set CMA_DMA_TIMEOUT_SEC to 10 seconds - chosen arbitrarily as both a huge
margin for a DMA transfer, yet not increasing the kdump time too
significantly.
Link: https://lkml.kernel.org/r/aEqpgDIBndZ5LXSo@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
reserve_crashkernel_cma() reserves CMA ranges for the crash kernel. If
allocating the requested size fails, try to reserve in smaller blocks.
Store the reserved ranges in the crashk_cma_ranges array and the number of
ranges in crashk_cma_cnt.
Link: https://lkml.kernel.org/r/aEqpBwOy_ekm0gw9@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kdump: crashkernel reservation from CMA", v5.
This series implements a way to reserve additional crash kernel memory
using CMA.
Currently, all the memory for the crash kernel is not usable by the 1st
(production) kernel. It is also unmapped so that it can't be corrupted by
the fault that will eventually trigger the crash. This makes sense for
the memory actually used by the kexec-loaded crash kernel image and initrd
and the data prepared during the load (vmcoreinfo, ...). However, the
reserved space needs to be much larger than that to provide enough
run-time memory for the crash kernel and the kdump userspace. Estimating
the amount of memory to reserve is difficult. Being too careful makes
kdump likely to end in OOM, being too generous takes even more memory from
the production system. Also, the reservation only allows reserving a
single contiguous block (or two with the "low" suffix). I've seen systems
where this fails because the physical memory is fragmented.
By reserving additional crashkernel memory from CMA, the main crashkernel
reservation can be just large enough to fit the kernel and initrd image,
minimizing the memory taken away from the production system. Most of the
run-time memory for the crash kernel will be memory previously available
to userspace in the production system. As this memory is no longer
wasted, the reservation can be done with a generous margin, making kdump
more reliable. Kernel memory that we need to preserve for dumping is
normally not allocated from CMA, unless it is explicitly allocated as
movable. Currently this is only the case for memory ballooning and zswap.
Such movable memory will be missing from the vmcore. User data is
typically not dumped by makedumpfile. When dumping of user data is
intended this new CMA reservation cannot be used.
There are five patches in this series:
The first adds a new ",cma" suffix to the recenly introduced generic
crashkernel parsing code. parse_crashkernel() takes one more argument to
store the cma reservation size.
The second patch implements reserve_crashkernel_cma() which performs the
reservation. If the requested size is not available in a single range,
multiple smaller ranges will be reserved.
The third patch updates Documentation/, explicitly mentioning the
potential DMA corruption of the CMA-reserved memory.
The fourth patch adds a short delay before booting the kdump kernel,
allowing pending DMA transfers to finish.
The fifth patch enables the functionality for x86 as a proof of
concept. There are just three things every arch needs to do:
- call reserve_crashkernel_cma()
- include the CMA-reserved ranges in the physical memory map
- exclude the CMA-reserved ranges from the memory available
through /proc/vmcore by excluding them from the vmcoreinfo
PT_LOAD ranges.
Adding other architectures is easy and I can do that as soon as this
series is merged.
With this series applied, specifying
crashkernel=100M craskhernel=1G,cma
on the command line will make a standard crashkernel reservation
of 100M, where kexec will load the kernel and initrd.
An additional 1G will be reserved from CMA, still usable by the production
system. The crash kernel will have 1.1G memory available. The 100M can
be reliably predicted based on the size of the kernel and initrd.
The new cma suffix is completely optional. When no
crashkernel=size,cma is specified, everything works as before.
This patch (of 5):
Add a new cma_size parameter to parse_crashkernel(). When not NULL, call
__parse_crashkernel to parse the CMA reservation size from
"crashkernel=size,cma" and store it in cma_size.
Set cma_size to NULL in all calls to parse_crashkernel().
Link: https://lkml.kernel.org/r/aEqnxxfLZMllMC8I@dwarf.suse.cz
Link: https://lkml.kernel.org/r/aEqoQckgoTQNULnh@dwarf.suse.cz
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Tao Liu <ltao@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a module is loaded, it adds trace events defined by the module. It
may also need to modify the modules trace printk formats to replace enum
names with their values.
If two modules are loaded at the same time, the adding of the event to the
ftrace_events list can corrupt the walking of the list in the code that is
modifying the printk format strings and crash the kernel.
The addition of the event should take the trace_event_sem for write while
it adds the new event.
Also add a lockdep_assert_held() on that semaphore in
__trace_add_event_dirs() as it iterates the list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250718223158.799bfc0c@batman.local.home
Reported-by: Fusheng Huang(黄富生) <Fusheng.Huang@luxshare-ict.com>
Closes: https://lore.kernel.org/all/20250717105007.46ccd18f@batman.local.home/
Fixes: 110bf2b764 ("tracing: add protection around module events unload")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix handling of migration disabled tasks in default idle selection.
- update_locked_rq() called __this_cpu_write() spuriously with NULL when @rq
was not locked. As the writes were spurious, it didn't break anything
directly. However, the function could be called in a preemptible leading
to a context warning in __this_cpu_write(). Skip the spurious NULL writes.
- Selftest fix on UP.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaHvPZw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGabMAP4jSAr4gYWEBOUaD9btwnPxZwlSiAEQtqBDBVRb
/UunFAD/WBwUPk/u7BchLHjuH3sYW5gQb40kbtUnmNvB+RNUUgc=
=3WAD
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix handling of migration disabled tasks in default idle selection
- update_locked_rq() called __this_cpu_write() spuriously with NULL
when @rq was not locked. As the writes were spurious, it didn't break
anything directly. However, the function could be called in a
preemptible leading to a context warning in __this_cpu_write(). Skip
the spurious NULL writes.
- Selftest fix on UP
* tag 'sched_ext-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Handle migration-disabled tasks in idle selection
sched/ext: Prevent update_locked_rq() calls with NULL rq
selftests/sched_ext: Fix exit selftest hang on UP
An earlier commit to suppress a warning introduced a race condition where
tasks can escape cgroup1 freezer. Revert the commit and simply remove the
warning which was spurious to begin with.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaHvMvw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGadfAP0cT4QXwtw0VXyiNr5PMqxQ74rYsngJ+NevRbod
fK6hIwD/T+owQc/ivYp5/N/XUgpT+Ixp7YRj2RIzQbL6SPjzOwE=
=IlrN
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"An earlier commit to suppress a warning introduced a race condition
where tasks can escape cgroup1 freezer. Revert the commit and simply
remove the warning which was spurious to begin with"
* tag 'cgroup-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup_freezer: cgroup_freezing: Check if not frozen"
sched,freezer: Remove unnecessary warning in __thaw_task
/proc/cgroups lists only v1 controllers by default, however, this is
only enforced since the commit af000ce852 ("cgroup: Do not report
unavailable v1 controllers in /proc/cgroups") and there is software in
the wild that uses content of /proc/cgroups to decide on availability of
v2 (sic) controllers.
Add a boottime param that can bring back the previous behavior for
setups where the check in the software cannot be changed and it causes
e.g. unintended OOMs.
Also, this patch takes out cgrp_v1_visible from cgroup1_subsys_absent()
guard since it's only important to check which hierarchy (v1 vs v2) the
subsys is attached to. This has no effect on the printed message but
the code is cleaner since cgrp_v1_visible is really about mounted
hierarchies, not the content of /proc/cgroups.
Link: https://lore.kernel.org/r/b26b60b7d0d2a5ecfd2f3c45f95f32922ed24686.camel@decadent.org.uk
Fixes: af000ce852 ("cgroup: Do not report unavailable v1 controllers in /proc/cgroups")
Fixes: a0ab145322 ("cgroup: Print message when /proc/cgroups is read on v2-only system")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We have observed kernel panics when using timerlat with stack saving,
with the following dmesg output:
memcpy: detected buffer overflow: 88 byte write of buffer size 0
WARNING: CPU: 2 PID: 8153 at lib/string_helpers.c:1032 __fortify_report+0x55/0xa0
CPU: 2 UID: 0 PID: 8153 Comm: timerlatu/2 Kdump: loaded Not tainted 6.15.3-200.fc42.x86_64 #1 PREEMPT(lazy)
Call Trace:
<TASK>
? trace_buffer_lock_reserve+0x2a/0x60
__fortify_panic+0xd/0xf
__timerlat_dump_stack.cold+0xd/0xd
timerlat_dump_stack.part.0+0x47/0x80
timerlat_fd_read+0x36d/0x390
vfs_read+0xe2/0x390
? syscall_exit_to_user_mode+0x1d5/0x210
ksys_read+0x73/0xe0
do_syscall_64+0x7b/0x160
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
__timerlat_dump_stack() constructs the ftrace stack entry like this:
struct stack_entry *entry;
...
memcpy(&entry->caller, fstack->calls, size);
entry->size = fstack->nr_entries;
Since commit e7186af7fb ("tracing: Add back FORTIFY_SOURCE logic to
kernel_stack event structure"), struct stack_entry marks its caller
field with __counted_by(size). At the time of the memcpy, entry->size
contains garbage from the ringbuffer, which under some circumstances is
zero, triggering a kernel panic by buffer overflow.
Populate the size field before the memcpy so that the out-of-bounds
check knows the correct size. This is analogous to
__ftrace_trace_stack().
Cc: stable@vger.kernel.org
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Attila Fazekas <afazekas@redhat.com>
Link: https://lore.kernel.org/20250716143601.7313-1-tglozar@redhat.com
Fixes: e7186af7fb ("tracing: Add back FORTIFY_SOURCE logic to kernel_stack event structure")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=eUL7
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix handling of BPF arena relocations (Andrii Nakryiko)
- Fix race in bpf_arch_text_poke() on s390 (Ilya Leoshkevich)
- Fix use of virt_to_phys() on arm64 when mmapping BTF (Lorenz Bauer)
- Reject %p% format string in bprintf-like BPF helpers (Paul Chaignon)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: Fix handling of BPF arena relocations
btf: Fix virt_to_phys() on arm64 when mmapping BTF
selftests/bpf: Stress test attaching a BPF prog to another BPF prog
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
selftests/bpf: Add negative test cases for snprintf
bpf: Reject %p% format string in bprintf-like helpers
Expose the auxiliary clock data so it can be read from the vDSO.
Architectures not using the generic vDSO time framework,
namely SPARC64, are not supported.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701-vdso-auxclock-v1-11-df7d9f87b9b8@linutronix.de
We observed a regression in our customer’s environment after enabling
CONFIG_LAZY_RCU. In the Android Update Engine scenario, where ioctl() is
used heavily, we found that callbacks queued via call_rcu_hurry (such as
percpu_ref_switch_to_atomic_rcu) can sometimes be delayed by up to 5
seconds before execution. This occurs because the new grace period does
not start immediately after the previous one completes.
The root cause is that the wake_nocb_gp_defer() function now checks
"rdp->nocb_defer_wakeup" instead of "rdp_gp->nocb_defer_wakeup". On CPUs
that are not rcuog, "rdp->nocb_defer_wakeup" may always be
RCU_NOCB_WAKE_NOT. This can cause "rdp_gp->nocb_defer_wakeup" to be
downgraded and the "rdp_gp->nocb_timer" to be postponed by up to 10
seconds, delaying the execution of hurry RCU callbacks.
The trace log of one scenario we encountered is as follow:
// previous GP ends at this point
rcu_preempt [000] d..1. 137.240210: rcu_grace_period: rcu_preempt 8369 end
rcu_preempt [000] ..... 137.240212: rcu_grace_period: rcu_preempt 8372 reqwait
// call_rcu_hurry enqueues "percpu_ref_switch_to_atomic_rcu", the callback waited on by UpdateEngine
update_engine [002] d..1. 137.301593: __call_rcu_common: wyy: unlikely p_ref = 00000000********. lazy = 0
// FirstQ on cpu 2 rdp_gp->nocb_timer is set to fire after 1 jiffy (4ms)
// and the rdp_gp->nocb_defer_wakeup is set to RCU_NOCB_WAKE
update_engine [002] d..2. 137.301595: rcu_nocb_wake: rcu_preempt 2 FirstQ on cpu2 with rdp_gp (cpu0).
// FirstBQ event on cpu2 during the 1 jiffy, make the timer postpond 10 seconds later.
// also, the rdp_gp->nocb_defer_wakeup is overwrite to RCU_NOCB_WAKE_LAZY
update_engine [002] d..1. 137.301601: rcu_nocb_wake: rcu_preempt 2 WakeEmptyIsDeferred
...
...
...
// before the 10 seconds timeout, cpu0 received another call_rcu_hurry
// reset the timer to jiffies+1 and set the waketype = RCU_NOCB_WAKE.
kworker/u32:0 [000] d..2. 142.557564: rcu_nocb_wake: rcu_preempt 0 FirstQ
kworker/u32:0 [000] d..1. 142.557576: rcu_nocb_wake: rcu_preempt 0 WakeEmptyIsDeferred
kworker/u32:0 [000] d..1. 142.558296: rcu_nocb_wake: rcu_preempt 0 WakeNot
kworker/u32:0 [000] d..1. 142.558562: rcu_nocb_wake: rcu_preempt 0 WakeNot
// idle(do_nocb_deferred_wakeup) wake rcuog due to waketype == RCU_NOCB_WAKE
<idle> [000] d..1. 142.558786: rcu_nocb_wake: rcu_preempt 0 DoWake
<idle> [000] dN.1. 142.558839: rcu_nocb_wake: rcu_preempt 0 DeferredWake
rcuog/0 [000] ..... 142.558871: rcu_nocb_wake: rcu_preempt 0 EndSleep
rcuog/0 [000] ..... 142.558877: rcu_nocb_wake: rcu_preempt 0 Check
// finally rcuog request a new GP at this point (5 seconds after the FirstQ event)
rcuog/0 [000] d..2. 142.558886: rcu_grace_period: rcu_preempt 8372 newreq
rcu_preempt [001] d..1. 142.559458: rcu_grace_period: rcu_preempt 8373 start
...
rcu_preempt [000] d..1. 142.564258: rcu_grace_period: rcu_preempt 8373 end
rcuop/2 [000] D..1. 142.566337: rcu_batch_start: rcu_preempt CBs=219 bl=10
// the hurry CB is invoked at this point
rcuop/2 [000] b.... 142.566352: blk_queue_usage_counter_release: wyy: wakeup. p_ref = 00000000********.
This patch changes the condition to check "rdp_gp->nocb_defer_wakeup" in
the lazy path. This prevents an already scheduled "rdp_gp->nocb_timer"
from being postponed and avoids overwriting "rdp_gp->nocb_defer_wakeup"
when it is not RCU_NOCB_WAKE_NOT.
Fixes: 3cb278e73b ("rcu: Make call_rcu() lazy to save power")
Co-developed-by: Cheng-jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-jui Wang <cheng-jui.wang@mediatek.com>
Co-developed-by: Lorry.Luo@mediatek.com
Signed-off-by: Lorry.Luo@mediatek.com
Tested-by: weiyangyang@vivo.com
Signed-off-by: weiyangyang@vivo.com
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Change the order of function qualifiers from 'noinline static' to 'static noinline'
in copy_clone_args_from_user for consistency with kernel coding style.
No functional change intended. The goal is to improve readability and
maintain consistent ordering of qualifiers across the codebase.
Signed-off-by: Dishank Jogi <dishank.jogi@siqol.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250716093525.449994-1-dishank.jogi@siqol.com
Signed-off-by: Kees Cook <kees@kernel.org>
Recently while revising RCU's cpu online checks, there was some discussion
around how IPIs synchronize with hotplug.
Add comments explaining how preemption disable creates mutual exclusion with
CPU hotplug's stop_machine mechanism. The key insight is that stop_machine()
atomically updates CPU masks and flushes IPIs with interrupts disabled, and
cannot proceed while any CPU (including the IPI sender) has preemption
disabled.
[ Apply peterz feedback. ]
Cc: Andrea Righi <arighi@nvidia.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: rcu@vger.kernel.org
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Fix up white space usage that does not follow the kernel coding style
rules in several places in snapshot.c.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Link: https://patch.msgid.link/20250716124216.64329-1-darshanrathod475@gmail.com
[ rjw: New subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When SCX_OPS_ENQ_MIGRATION_DISABLED is enabled, migration-disabled tasks
are also routed to ops.enqueue(). A scheduler may attempt to dispatch
such tasks directly to an idle CPU using the default idle selection
policy via scx_bpf_select_cpu_and() or scx_bpf_select_cpu_dfl().
This scenario must be properly handled by the built-in idle policy to
avoid returning an idle CPU where the target task isn't allowed to run.
Otherwise, it can lead to errors such as:
EXIT: runtime error (SCX_DSQ_LOCAL[_ON] cannot move migration disabled Chrome_ChildIOT[291646] from CPU 3 to 14)
Prevent this by explicitly handling migration-disabled tasks in the
built-in idle selection logic, maintaining their CPU affinity.
Fixes: a730e3f7a4 ("sched_ext: idle: Consolidate default idle CPU selection kfuncs")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The comment mentions bpf_scx_reenqueue_local(), but the function
is provided for the BPF program implementing scx, as such the
naming convention is scx_bpf_reenqueue_local(), fix the comment.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit cff5f49d43.
Commit cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting the commit cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check
if not frozen") to resolve the issue.
The warning has been removed in the previous patch. This patch revert the
commit cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check if not
frozen") to complete the fix.
Fixes: cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check if not frozen")
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting commit cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to resolve the issue.
This patch removes the warning from __thaw_task. A subsequent patch will
revert commit cff5f49d43 ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to complete the fix.
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Before the commit 36df6e3dbd ("cgroup: make css_rstat_updated nmi
safe"), the struct llist_node is expected to be private to the one
inserting the node to the lockless list or the one removing the node
from the lockless list. After the mentioned commit, the llist_node in
the rstat code is per-cpu shared between the stacked contexts i.e.
process, softirq, hardirq & nmi. It is possible the compiler may tear
the loads or stores of llist_node. Let's avoid that.
KCSAN reported the following race:
Reported by Kernel Concurrency Sanitizer on:
CPU: 60 UID: 0 PID: 5425 ... 6.16.0-rc3-next-20250626 #1 NONE
Tainted: [E]=UNSIGNED_MODULE
Hardware name: ...
==================================================================
==================================================================
BUG: KCSAN: data-race in css_rstat_flush / css_rstat_updated
write to 0xffffe8fffe1c85f0 of 8 bytes by task 1061 on cpu 1:
css_rstat_flush+0x1b8/0xeb0
__mem_cgroup_flush_stats+0x184/0x190
flush_memcg_stats_dwork+0x22/0x50
process_one_work+0x335/0x630
worker_thread+0x5f1/0x8a0
kthread+0x197/0x340
ret_from_fork+0xd3/0x110
ret_from_fork_asm+0x11/0x20
read to 0xffffe8fffe1c85f0 of 8 bytes by task 3551 on cpu 15:
css_rstat_updated+0x81/0x180
mod_memcg_lruvec_state+0x113/0x2d0
__mod_lruvec_state+0x3d/0x50
lru_add+0x21e/0x3f0
folio_batch_move_lru+0x80/0x1b0
__folio_batch_add_and_move+0xd7/0x160
folio_add_lru_vma+0x42/0x50
do_anonymous_page+0x892/0xe90
__handle_mm_fault+0xfaa/0x1520
handle_mm_fault+0xdc/0x350
do_user_addr_fault+0x1dc/0x650
exc_page_fault+0x5c/0x110
asm_exc_page_fault+0x22/0x30
value changed: 0xffffe8fffe18e0d0 -> 0xffffe8fffe1c85f0
$ ./scripts/faddr2line vmlinux css_rstat_flush+0x1b8/0xeb0
css_rstat_flush+0x1b8/0xeb0:
init_llist_node at include/linux/llist.h:86
(inlined by) llist_del_first_init at include/linux/llist.h:308
(inlined by) css_process_update_tree at kernel/cgroup/rstat.c:148
(inlined by) css_rstat_updated_list at kernel/cgroup/rstat.c:258
(inlined by) css_rstat_flush at kernel/cgroup/rstat.c:389
$ ./scripts/faddr2line vmlinux css_rstat_updated+0x81/0x180
css_rstat_updated+0x81/0x180:
css_rstat_updated at kernel/cgroup/rstat.c:90 (discriminator 1)
These are expected race and a simple READ_ONCE/WRITE_ONCE resolves these
reports. However let's add comments to explain the race and the need for
memory barriers if stronger guarantees are needed.
More specifically the rstat updater and the flusher can race and cause a
scenario where the stats updater skips adding the css to the lockless
list but the flusher might not see those updates done by the skipped
updater. This is benign race and the subsequent flusher will flush those
stats and at the moment there aren't any rstat users which are not fine
with this kind of race. However some future user might want more
stricter guarantee, so let's add appropriate comments to ease the job of
future users.
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: 36df6e3dbd ("cgroup: make css_rstat_updated nmi safe")
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix a deadlock that may occur on asynchronous device suspend
failures due to missing completion updates in error paths (Rafael
Wysocki).
- Drop a misplaced pm_restore_gfp_mask() call, which may cause
swap to be accessed too early if system suspend fails, from
suspend_devices_and_enter() (Rafael Wysocki).
- Remove duplicate filesystems_freeze/thaw() calls, which sometimes
cause systems to be unable to resume, from enter_state() (Zihuan
Zhang).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh5IE4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO12LYH/3CULHOIoshuWu+G9nIKokqO0oNYmxh1
qgkh+o9sBz9uTyfCSd1qDT9j1LjzUnOJUe67IzHJFuZcHbnWU4k9VYWV+H8TKyNp
CcQ+9g5gCqOzxWH7G7C2ekciSnnBlObwJ7ZsDlUOeuJ16GVCjqrFPZbJ6No0A+Hz
8Ed7R4o1MKrURLU9IZWpqV1a54Z9ySv2yrx9T4G0c8WV2VRJZJ76e1hAGcOr4owj
kM1+MPnsfU/RvBUUEKjUEm70ZBXGbXT+D9p/L/AuoYyhI94kvoImK1/2An5noHCO
czK5nDB867z6hu5jTVPt/RoIK/49H/a2CDNYl3ZiZnVVZIoPN/wt3C8=
=wkHb
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues introduced during the current development
cycle and related to system suspend and hibernation, one triggering
when asynchronous suspend of devices fails, one possibly affecting
memory management in the core suspend code error path, and one due to
duplicate filesystems freezing during system suspend:
- Fix a deadlock that may occur on asynchronous device suspend
failures due to missing completion updates in error paths (Rafael
Wysocki)
- Drop a misplaced pm_restore_gfp_mask() call, which may cause swap
to be accessed too early if system suspend fails, from
suspend_devices_and_enter() (Rafael Wysocki)
- Remove duplicate filesystems_freeze/thaw() calls, which sometimes
cause systems to be unable to resume, from enter_state() (Zihuan
Zhang)"
* tag 'pm-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Update power.completion for all devices on errors
PM: suspend: clean up redundant filesystems_freeze/thaw() handling
PM: suspend: Drop a misplaced pm_restore_gfp_mask() call
The 'commit 35f96de041 ("bpf: Introduce BPF token object")' added
BPF token as a new kind of BPF kernel object. And BPF_OBJ_GET_INFO_BY_FD
already used to get BPF object info, so we can also get token info with
this cmd.
One usage scenario, when program runs failed with token, because of
the permission failure, we can report what BPF token is allowing with
this API for debugging.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250716134654.1162635-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The last iterators update (commit 515ee52b22 ("bpf: make preloaded
map iterators to display map elements count")) missed the big-endian
skeleton. Update it by running "make big" with Debian clang version
21.0.0 (++20250706105601+01c97b4953e8-1~exp1~20250706225612.1558).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250710100907.45880-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL
in the SCX_CALL_OP and SCX_CALL_OP_RET macros.
Previously, calling update_locked_rq(NULL) with preemption enabled could
trigger the following warning:
BUG: using __this_cpu_write() in preemptible [00000000]
This happens because __this_cpu_write() is unsafe to use in preemptible
context.
rq is NULL when an ops invoked from an unlocked context. In such cases, we
don't need to store any rq, since the value should already be NULL
(unlocked). Ensure that update_locked_rq() is only called when rq is
non-NULL, preventing calling __this_cpu_write() on preemptible context.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Fixes: 18853ba782 ("sched_ext: Track currently locked rq")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.15
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d76944 ("tracing/probes: Support BTF field access from $retval")
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Extract the complex expedited handling condition in rcu_read_unlock_special()
into a separate function rcu_unlock_needs_exp_handling() with detailed
comments explaining each condition.
This improves code readability. No functional change intended.
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Currently, SRCU-fast grace periods use synchronize_rcu() to provide the
needed ordering with readers, even given an expedited SRCU-fast grace
period, which isn't all that expedited. This commit therefore instead
uses synchronize_rcu_expedited() if there is an expedited SRCU-fast
grace period in flight.
Of course, given an non-expedited SRCU-fast grace period blocked in
synchronize_rcu(), a later request for an expedited SRCU-fast grace
period will wait for that synchronize_rcu() to return before switching
to use of synchronize_rcu_expedited(). If this turns out to be a real
problem for a production workload, we can increase the complexity (but
likely also degrade the energy efficiency) to speed things up further.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Because SRCU-lite is being replaced by SRCU-fast, this commit removes
support for SRCU-lite from rcutorture.c
Both SRCU-lite and SRCU-fast provide faster readers by dropping the
smp_mb() call from their lock and unlock primitives, but incur a pair
of added RCU grace periods during the SRCU grace period. There is a
trivial mapping from the SRCU-lite API to that of SRCU-fast, so there
should be no transition issues.
[ paulmck: Apply Christoph Hellwig feedback. ]
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Because SRCU-lite is being replaced by SRCU-fast, this commit removes
support for SRCU-lite from refscale.c.
Both SRCU-lite and SRCU-fast provide faster readers by dropping the
smp_mb() call from their lock and unlock primitives, but incur a pair
of added RCU grace periods during the SRCU grace period. There is a
trivial mapping from the SRCU-lite API to that of SRCU-fast, so there
should be no transition issues.
[ paulmck: Apply Christoph Hellwig feedback. ]
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
During rcu_read_unlock_special(), if this happens during irq_exit(), we
can lockup if an IPI is issued. This is because the IPI itself triggers
the irq_exit() path causing a recursive lock up.
This is precisely what Xiongfeng found when invoking a BPF program on
the trace_tick_stop() tracepoint As shown in the trace below. Fix by
managing the irq_work state correctly.
irq_exit()
__irq_exit_rcu()
/* in_hardirq() returns false after this */
preempt_count_sub(HARDIRQ_OFFSET)
tick_irq_exit()
tick_nohz_irq_exit()
tick_nohz_stop_sched_tick()
trace_tick_stop() /* a bpf prog is hooked on this trace point */
__bpf_trace_tick_stop()
bpf_trace_run2()
rcu_read_unlock_special()
/* will send a IPI to itself */
irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
A simple reproducer can also be obtained by doing the following in
tick_irq_exit(). It will hang on boot without the patch:
static inline void tick_irq_exit(void)
{
+ rcu_read_lock();
+ WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, true);
+ rcu_read_unlock();
+
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Closes: https://lore.kernel.org/all/9acd5f9f-6732-7701-6880-4b51190aa070@huawei.com/
Tested-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
[neeraj: Apply Frederic's suggested fix for PREEMPT_RT]
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
------------------------------------------------------------------------
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
------------------------------------------------------------------------
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Add zoned block commands to blk_fill_rwbs:
- ZONE APPEND will be decoded as 'ZA'
- ZONE RESET will be decoded as 'ZR'
- ZONE RESET ALL will be decoded as 'ZRA'
- ZONE FINISH will be decoded as 'ZF'
- ZONE OPEN will be decoded as 'ZO'
- ZONE CLOSE will be decoded as 'ZC'
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250715115324.53308-2-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop the direct pm_restore_gfp_mask() call from the KEXEC_JUMP flow in
kernel_kexec() because it is redundant. Namely, dpm_resume_end()
called beforehand in the same code path invokes that function and
it is sufficient to invoke it once.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/1949230.tdWV9SEqCh@rjwysocki.net
[ rjw: Rebase after fixing up previous changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If dpm_suspend_start() fails, dpm_resume_end() must be called to
recover devices whose suspend callbacks have been called, but this
does not happen in the KEXEC_JUMP flow's error path due to a confused
goto target label.
Address this by using the correct target label in the goto statement in
question and drop the Resume_console label that is not used any more.
Fixes: 2965faa5e0 ("kexec: split kexec_load syscall from kexec core code")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2396879.ElGaqSPkdT@rjwysocki.net
[ rjw: Drop unused label and amend the changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The recently introduced support for freezing filesystems during system
suspend included calls to filesystems_freeze() in both suspend_prepare()
and enter_state(), as well as calls to filesystems_thaw() in both
suspend_finish() and the Unlock path in enter_state(). These are
redundant.
Moreover, calling filesystems_freeze() twice, from both suspend_prepare()
and enter_state(), leads to a black screen and makes the system unable
to resume in some cases.
Address this as follows:
- filesystems_freeze() is already called in suspend_prepare(), which
is the proper and consistent place to handle pre-suspend operations.
The second call in enter_state() is unnecessary and so remove it.
- filesystems_thaw() is invoked in suspend_finish(), which covers
successful suspend/resume paths. In the failure case, add a call
to filesystems_thaw() only when needed, avoiding the duplicate call
in the general Unlock path.
This change simplifies the suspend code and avoids repeated freeze/thaw
calls, while preserving correct ordering and behavior.
Fixes: eacfbf7419 ("power: freeze filesystems during suspend/resume")
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/20250712030824.81474-1-zhangzihuan@kylinos.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pm_restore_gfp_mask() call added by commit 12ffc3b151 ("PM:
Restrict swap use to later in the suspend sequence") to
suspend_devices_and_enter() is done too early because it takes
place before calling dpm_resume() in dpm_resume_end() and some
swap-backing devices may not be ready at that point. Moreover,
dpm_resume_end() called subsequently in the same code path invokes
pm_restore_gfp_mask() again and calling it twice in a row is
pointless.
Drop the misplaced pm_restore_gfp_mask() call from
suspend_devices_and_enter() to address this issue.
Fixes: 12ffc3b151 ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2810409.mvXUDI8C0e@rjwysocki.net
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add kerneldoc for '__get_insn_slot' function to fix W=1 warnings:
kernel/kprobes.c:141 function parameter 'c' not described in '__get_insn_slot'
Link: https://lore.kernel.org/all/20250704143817707TOCcfTRWsO5OAbQ2eYoU9@zte.com.cn/
Signed-off-by: Peng Jiang <jiang.peng9@zte.com.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
lockdep_unregister_key() is called from critical code paths, including
sections where rtnl_lock() is held. For example, when replacing a qdisc
in a network device, network egress traffic is disabled while
__qdisc_destroy() is called for every network queue.
If lockdep is enabled, __qdisc_destroy() calls lockdep_unregister_key(),
which gets blocked waiting for synchronize_rcu() to complete.
For example, a simple tc command to replace a qdisc could take 13
seconds:
# time /usr/sbin/tc qdisc replace dev eth0 root handle 0x1: mq
real 0m13.195s
user 0m0.001s
sys 0m2.746s
During this time, network egress is completely frozen while waiting for
RCU synchronization.
Use synchronize_rcu_expedited() instead to minimize the impact on
critical operations like network connectivity changes.
This improves 10x the function call to tc, when replacing the qdisc for
a network card.
# time /usr/sbin/tc qdisc replace dev eth0 root handle 0x1: mq
real 0m1.789s
user 0m0.000s
sys 0m1.613s
[boqun: Fixed the comment and add more information for the temporary
workaround, and add TODO information for hazptr]
Reported-by: Erik Lundgren <elundgren@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250321-lockdep-v1-1-78b732d195fb@debian.org
hung_task_{set,clear}_blocker() is already guarded by
CONFIG_DETECT_HUNG_TASK_BLOCKER in hung_task.h, So remove
the redudant check of #ifdef.
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250704015218.359754-1-ranxiaokai627@163.com
gcc warns about 'static const' variables even in headers when building
with -Wunused-const-variables enabled:
In file included from kernel/locking/lockdep_proc.c:25:
kernel/locking/lockdep_internals.h:69:28: error: 'LOCKF_USED_IN_IRQ_READ' defined but not used [-Werror=unused-const-variable=]
69 | static const unsigned long LOCKF_USED_IN_IRQ_READ =
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/locking/lockdep_internals.h:63:28: error: 'LOCKF_ENABLED_IRQ_READ' defined but not used [-Werror=unused-const-variable=]
63 | static const unsigned long LOCKF_ENABLED_IRQ_READ =
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/locking/lockdep_internals.h:57:28: error: 'LOCKF_USED_IN_IRQ' defined but not used [-Werror=unused-const-variable=]
57 | static const unsigned long LOCKF_USED_IN_IRQ =
| ^~~~~~~~~~~~~~~~~
kernel/locking/lockdep_internals.h:51:28: error: 'LOCKF_ENABLED_IRQ' defined but not used [-Werror=unused-const-variable=]
51 | static const unsigned long LOCKF_ENABLED_IRQ =
| ^~~~~~~~~~~~~~~~~
This one is easy to avoid by changing the generated constant definition
into an equivalent enum.
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250409122314.2848028-6-arnd@kernel.org
Returning a large structure from the lock_stats() function causes clang
to have multiple copies of it on the stack and copy between them, which
can end up exceeding the frame size warning limit:
kernel/locking/lockdep.c:300:25: error: stack frame size (1464) exceeds limit (1280) in 'lock_stats' [-Werror,-Wframe-larger-than]
300 | struct lock_class_stats lock_stats(struct lock_class *class)
Change the calling conventions to directly operate on the caller's copy,
which apparently is what gcc does already.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250610092941.2642847-1-arnd@kernel.org
Rename the existing sha1_init() to sha1_init_raw(), since it conflicts
with the upcoming library function. This will later be removed, but
this keeps the kernel building for the introduction of the library.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Start to flesh out the real find_proxy_task() implementation,
but avoid the migration cases for now, in those cases just
deactivate the donor task and pick again.
To ensure the donor task or other blocked tasks in the chain
aren't migrated away while we're running the proxy, also tweak
the fair class logic to avoid migrating donor or mutex blocked
tasks.
[jstultz: This change was split out from the larger proxy patch]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-9-jstultz@google.com
Proxy execution forms atomic pairs of tasks: The waiting donor
task (scheduling context) and a proxy (execution context). The
donor task, along with the rest of the blocked chain, follows
the proxy wrt CPU placement.
They can be the same task, in which case push/pull doesn't need any
modification. When they are different, however,
FIFO1 & FIFO42:
,-> RT42
| | blocked-on
| v
blocked_donor | mutex
| | owner
| v
`-- RT1
RT1
RT42
CPU0 CPU1
^ ^
| |
overloaded !overloaded
rq prio = 42 rq prio = 0
RT1 is eligible to be pushed to CPU1, but should that happen it will
"carry" RT42 along. Clearly here neither RT1 nor RT42 must be seen as
push/pullable.
Unfortunately, only the donor task is usually dequeued from the rq,
and the proxy'ed execution context (rq->curr) remains on the rq.
This can cause RT1 to be selected for migration from logic like the
rt pushable_list.
Thus, adda a dequeue/enqueue cycle on the proxy task before __schedule
returns, which allows the sched class logic to avoid adding the now
current task to the pushable_list.
Furthermore, tasks becoming blocked on a mutex don't need an explicit
dequeue/enqueue cycle to be made (push/pull)able: they have to be running
to block on a mutex, thus they will eventually hit put_prev_task().
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-8-jstultz@google.com
Add a find_proxy_task() function which doesn't do much.
When we select a blocked task to run, we will just deactivate it
and pick again. The exception being if it has become unblocked
after find_proxy_task() was called.
This allows us to validate keeping blocked tasks on the runqueue
and later deactivating them is working ok, stressing the failure
cases for when a proxy isn't found.
Greatly simplified from patch by:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
[jstultz: Split out from larger proxy patch and simplified
for review and testing.]
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-7-jstultz@google.com
Without proxy-exec, we normally charge the "current" task for
both its vruntime as well as its sum_exec_runtime.
With proxy, however, we have two "current" contexts: the
scheduler context and the execution context. We want to charge
the execution context rq->curr (ie: proxy/lock holder) execution
time to its sum_exec_runtime (so it's clear to userland the
rq->curr task *is* running), as well as its thread group.
However the rest of the time accounting (such a vruntime and
cgroup accounting), we charge against the scheduler context
(rq->donor) task, because it is from that task that the time
is being "donated".
If the donor and curr tasks are the same, then it's the same as
without proxy.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-6-jstultz@google.com
Absorb update_curr_task() into update_curr_se(), and
in the process simplify update_curr_common().
This will make the next step a bit easier.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-5-jstultz@google.com
This lets us assert mutex::wait_lock is held whenever we access
p->blocked_on, as well as warn us for unexpected state changes.
[fix conflicts, call in more places]
[jstultz: tweaked commit subject, reworked a good bit]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-4-jstultz@google.com
Track the blocked-on relation for mutexes, to allow following this
relation at schedule time.
task
| blocked-on
v
mutex
| owner
v
task
This all will be used for tracking blocked-task/mutex chains
with the prox-execution patch in a similar fashion to how
priority inheritance is done with rt_mutexes.
For serialization, blocked-on is only set by the task itself
(current). And both when setting or clearing (potentially by
others), is done while holding the mutex::wait_lock.
[minor changes while rebasing]
[jstultz: Fix blocked_on tracking in __mutex_lock_common in error paths]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-3-jstultz@google.com
Add a CONFIG_SCHED_PROXY_EXEC option, along with a boot argument
sched_proxy_exec= that can be used to disable the feature at boot
time if CONFIG_SCHED_PROXY_EXEC was enabled.
Also uses this option to allow the rq->donor to be different from
rq->curr.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250712033407.2383110-2-jstultz@google.com
Support for overlapping domains added in commit e3589f6c81 ("sched:
Allow for overlapping sched_domain spans") also allowed forcefully
setting SD_OVERLAP for !NUMA domains via FORCE_SD_OVERLAP sched_feat().
Since NUMA domains had to be presumed overlapping to ensure correct
behavior, "sched_domain_topology_level::flags" was introduced. NUMA
domains added the SDTL_OVERLAP flag would ensure SD_OVERLAP was always
added during build_sched_domains() for these domains, even when
FORCE_SD_OVERLAP was off.
Condition for adding the SD_OVERLAP flag at the aforementioned commit
was as follows:
if (tl->flags & SDTL_OVERLAP || sched_feat(FORCE_SD_OVERLAP))
sd->flags |= SD_OVERLAP;
The FORCE_SD_OVERLAP debug feature was removed in commit af85596c74
("sched/topology: Remove FORCE_SD_OVERLAP") which left the NUMA domains
as the exclusive users of SDTL_OVERLAP, SD_OVERLAP, and SD_NUMA flags.
Get rid of SDTL_OVERLAP and SD_OVERLAP as they have become redundant
and instead rely on SD_NUMA to detect the only overlapping domain
currently supported. Since SDTL_OVERLAP was the only user of
"tl->flags", get rid of "sched_domain_topology_level::flags" too.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ba4dbdf8-bc37-493d-b2e0-2efb00ea3e19@amd.com
Define a small SDTL_INIT(maskfn, flagsfn, name) macro and use it to build the
sched_domain_topology_level array. Purely a cleanup; behaviour is unchanged.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Li Chen <chenl311@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250710105715.66594-2-me@linux.beauty
A global limits change (sched_rt_handler() logic) currently leaves stale
and/or incorrect values in variables related to accounting (e.g.
extra_bw).
Properly clean up per runqueue variables before implementing the change
and rebuild scheduling domains (so that accounting is also properly
restored) after such a change is complete.
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-4-juri.lelli@redhat.com
dl_clear_root_domain() doesn't take into account the fact that per-rq
extra_bw variables retain values computed before root domain changes,
resulting in broken accounting.
Fix it by resetting extra_bw to max_bw before restoring back dl-servers
contributions.
Fixes: 2ff899e351 ("sched/deadline: Rebuild root domain accounting after every update")
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-3-juri.lelli@redhat.com
dl-servers are currently initialized too early at boot when CPUs are not
fully up (only boot CPU is). This results in miscalculation of per
runqueue DEADLINE variables like extra_bw (which needs a stable CPU
count).
Move initialization of dl-servers later on after SMP has been
initialized and CPUs are all online, so that CPU count is stable and
DEADLINE variables can be computed correctly.
Fixes: d741f297bc ("sched/fair: Fair server interface")
Reported-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@codethink.co.uk> # nuc & rock5b
Link: https://lore.kernel.org/r/20250627115118.438797-2-juri.lelli@redhat.com
The commit e6fe3f422b ("sched: Make multiple runqueue task counters
32-bit") changed nr_uninterruptible to an unsigned int. But the
nr_uninterruptible values for each of the CPU runqueues can grow to
large numbers, sometimes exceeding INT_MAX. This is valid, if, over
time, a large number of tasks are migrated off of one CPU after going
into an uninterruptible state. Only the sum of all nr_interruptible
values across all CPUs yields the correct result, as explained in a
comment in kernel/sched/loadavg.c.
Change the type of nr_uninterruptible back to unsigned long to prevent
overflows, and thus the miscalculation of load average.
Fixes: e6fe3f422b ("sched: Make multiple runqueue task counters 32-bit")
Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250709173328.606794-1-aruna.ramakrishna@oracle.com
MIGRATE_ISOLATE is a standalone bit, so a pageblock cannot be initialized
to just MIGRATE_ISOLATE. Add init_pageblock_migratetype() to enable
initialize a pageblock with a migratetype and isolated.
Link: https://lkml.kernel.org/r/20250617021115.2331563-4-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Richard Chang <richardycc@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cpuset is only concerned when a numa node changes its memory state, as it
needs to know the current numa nodes with memory to keep an updated
mems_allowed mask. So stop using the memory notifier and use the new numa
node notifer instead.
Link: https://lkml.kernel.org/r/20250616135158.450136-9-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Setting anon_name is done via madvise_set_anon_name() and behaves a lot of
like other madvise operations. However, apparently because madvise() has
lacked the 4th argument and prctl() not, the userspace entry point has
been implemented via prctl(PR_SET_VMA, ...) and handled first by
prctl_set_vma().
Currently prctl_set_vma() lives in kernel/sys.c but setting the
vma->anon_name is mm-specific code so extract it to a new
set_anon_vma_name() function under mm. mm/madvise.c seems to be the most
straightforward place as that's where madvise_set_anon_name() lives. Stop
declaring the latter in mm.h and instead declare set_anon_vma_name().
Link: https://lkml.kernel.org/r/20250624-anon_name_cleanup-v2-2-600075462a11@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Colin Cross <ccross@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
about it
-----BEGIN PGP SIGNATURE-----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=vP1/
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Prevent perf_sigtrap() from observing an exiting task and warning
about it
* tag 'perf_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix WARN in perf_sigtrap()
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaHGbTgAKCRDdBJ7gKXxA
jowqAPiCWBFfcFaX20BxVaMU1PjC3Lh9llDXqQwBhBNdcadSAP44SGQ8nrfV+piB
OcNz2AEwBBfS354G0Etlh4k08YoAAw==
=IDDc
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
After commit 7d43f1ce9d ("locking/rwsem: Enable time-based spinning on
reader-owned rwsem"), OWNER_SPINNABLE contains all possible values except
OWNER_NONSPINNABLE, namely OWNER_NULL | OWNER_WRITER | OWNER_READER.
Therefore, it is better to use OWNER_NONSPINNABLE directly to determine
whether to exit optimistic spin.
And, remove useless OWNER_SPINNABLE to simplify the code.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250610130158.4876-1-alexjlzheng@tencent.com
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The description above vpanic() has the wrong function name. Fix it up.
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/23a7e8add6546b155371b7e0fbb37bb1def13d6e.1752232374.git.namcao@linutronix.de
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20250711183802.2d8c124d@canb.auug.org.au/
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Use attach_type in bpf_link, and remove it in bpf_netns_link.
And move netns_type field to the end to fill the byte hole.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250710032038.888700-6-chen.dylane@linux.dev
Use attach_type in bpf_link to replace the location filed, and
remove location field in tcx_link.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250710032038.888700-5-chen.dylane@linux.dev
Use attach_type in bpf_link, and remove it in bpf_cgroup_link.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250710032038.888700-3-chen.dylane@linux.dev
Attach_type will be set when a link is created by user. It is better to
record attach_type in bpf_link generically and have it available
universally for all link types. So add the attach_type field in bpf_link
and move the sleepable field to avoid unnecessary gap padding.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250710032038.888700-2-chen.dylane@linux.dev
Syzbot reported a kernel warning due to a range invariant violation on
the following BPF program.
0: call bpf_get_netns_cookie
1: if r0 == 0 goto <exit>
2: if r0 & Oxffffffff goto <exit>
The issue is on the path where we fall through both jumps.
That path is unreachable at runtime: after insn 1, we know r0 != 0, but
with the sign extension on the jset, we would only fallthrough insn 2
if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to
figure this out, so the verifier walks all branches. The verifier then
refines the register bounds using the second condition and we end
up with inconsistent bounds on this unreachable path:
1: if r0 == 0 goto <exit>
r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff)
2: if r0 & 0xffffffff goto <exit>
r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0)
r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0)
Improving the range refinement for JSET to cover all cases is tricky. We
also don't expect many users to rely on JSET given LLVM doesn't generate
those instructions. So instead of improving the range refinement for
JSETs, Eduard suggested we forget the ranges whenever we're narrowing
tnums after a JSET. This patch implements that approach.
Reported-by: syzbot+c711ce17dd78e5d4fdcf@syzkaller.appspotmail.com
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/9d4fd6432a095d281f815770608fdcd16028ce0b.1752171365.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new BPF arena kfunc for reserving a range of arena virtual
addresses without backing them with pages. This prevents the range from
being populated using bpf_arena_alloc_pages().
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250709191312.29840-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define 4 new attack vectors that are used for controlling CPU speculation
mitigations. These may be individually disabled as part of the
mitigations= command line. Attack vector controls are combined with global
options like 'auto' or 'auto,nosmt' like 'mitigations=auto,no_user_kernel'.
The global options come first in the mitigations= string.
Cross-thread mitigations can either remain enabled fully, including
potentially disabling SMT ('auto,nosmt'), remain enabled except for
disabling SMT ('auto'), or entirely disabled through the new
'no_cross_thread' attack vector option.
The default settings for these attack vectors are consistent with existing
kernel defaults, other than the automatic disabling of VM-based attack
vectors if KVM support is not present.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250707183316.1349127-3-david.kaplan@amd.com
- small fix relevant to arm64 server and custom CMA configuration
(Feng Tang)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaHCzdQAKCRCJp1EFxbsS
RMrMAQDghOwKZqYuC27kJt5T7lgG47YCNE5em1v8WsTSvwQAugEA4AlWIpqQ34eI
Es6ObfMt8Q9gArubFZ0ZDFtmZq9NpA0=
=+z0i
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- small fix relevant to arm64 server and custom CMA configuration (Feng
Tang)
* tag 'dma-mapping-6.16-2025-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-contiguous: hornor the cma address limit setup by user
The FH_FLAG_IMMUTABLE flag was meant to avoid the reference counting on
the private hash and so to avoid the performance regression on big
machines.
With the switch to per-CPU counter this is no longer needed. That flag
was never useable on any released kernel.
Remove any support for IMMUTABLE while preserve the flags argument and
enforce it to be zero.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250710110011.384614-5-bigeasy@linutronix.de
futex_private_hash_get() is not used outside if its compilation unit.
Make it static.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250710110011.384614-4-bigeasy@linutronix.de
The use of rcuref_t for reference counting introduces a performance bottleneck
when accessed concurrently by multiple threads during futex operations.
Replace rcuref_t with special crafted per-CPU reference counters. The
lifetime logic remains the same.
The newly allocate private hash starts in FR_PERCPU state. In this state, each
futex operation that requires the private hash uses a per-CPU counter (an
unsigned int) for incrementing or decrementing the reference count.
When the private hash is about to be replaced, the per-CPU counters are
migrated to a atomic_t counter mm_struct::futex_atomic.
The migration process:
- Waiting for one RCU grace period to ensure all users observe the
current private hash. This can be skipped if a grace period elapsed
since the private hash was assigned.
- futex_private_hash::state is set to FR_ATOMIC, forcing all users to
use mm_struct::futex_atomic for reference counting.
- After a RCU grace period, all users are guaranteed to be using the
atomic counter. The per-CPU counters can now be summed up and added to
the atomic_t counter. If the resulting count is zero, the hash can be
safely replaced. Otherwise, active users still hold a valid reference.
- Once the atomic reference count drops to zero, the next futex
operation will switch to the new private hash.
call_rcu_hurry() is used to speed up transition which otherwise might be
delay with RCU_LAZY. There is nothing wrong with using call_rcu(). The
side effects would be that on auto scaling the new hash is used later
and the SET_SLOTS prctl() will block longer.
[bigeasy: commit description + mm get/ put_async]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250710110011.384614-3-bigeasy@linutronix.de
Export irq_domain_free_irqs_top(), making it usable for drivers compiled as
modules.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong