* Core:
* Add a resource-managed version of alloc_workqueue() (`devm_alloc_workqueue()`)
* Apple SMC:
* Wire up the Apple SMC power driver by adding a new MFD cell
* Broadcom BCM2835 PM:
* Add support for the BCM2712 power management device
* Introduce a hardware type identifier to distinguish SoC variants
* Intel LPSS:
* Add PCI IDs for the Intel Nova Lake-H platform
* Core:
* Preserve the Open Firmware (OF) node when an ACPI handle is present
* Atmel HLCDC:
* Fetch the LVDS PLL clock as a fallback if the generic sys_clk is unavailable
* EZX PCAP:
* Avoid rescheduling after destroying the workqueue by switching to a device-managed workqueue
* Freescale MC13xxx:
* Fix a memory leak in subdevice platform data allocation by using devm_kmemdup()
* Intel LPC ICH:
* Expose a software node for the GPIO controller cell to fix GPIO lookups
* MediaTek MT6397:
* Correct the hardware CIDs for the MT6328, MT6331, and MT6332 PMICs to allow proper driver
binding
* ROHM BD71828:
* Enable system wakeup via the power button
* STMicroelectronics STPMIC1:
* Attempt system shutdown a second time to handle transient I2C communication failures
* Congatec CGBC, KEMPLD, RSMU, Si476x:
* Fix various kernel-doc warnings and correct struct member names
* DLN2:
* Drop redundant USB device references and switch to managed resource allocations
* Update bare 'unsigned' types to 'unsigned int'
* ENE KB3930:
* Use the of_device_is_system_power_controller() wrapper
* EZX PCAP:
* Drop redundant memory allocation error messages
* Return directly instead of using empty goto statements
* Maxim MAX77705:
* Make the max77705_pm_ops variable static to resolve a sparse warning
* Viperboard:
* Drop redundant USB device references
* SpacemiT P1:
* Drop the deprecated "vin-supply" property from the devicetree bindings
* SpacemiT P1:
* Add individual regulator supply properties to match actual hardware topology
* Maxim MAX77620:
* Convert devicetree bindings from TXT to YAML format
* Document an optional I2C address for the MAX77663 RTC device
* ROHM BD72720:
* Add a new compatible string for the ROHM BD73900 PMIC
* Freescale i.MX25 TSADC:
* Convert devicetree bindings from TXT to YAML format
-----BEGIN PGP SIGNATURE-----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=S0In
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core:
- Add a resource-managed version of alloc_workqueue()
(`devm_alloc_workqueue()`)
- Preserve the Open Firmware (OF) node when an ACPI handle
is present
Apple SMC:
- Wire up the Apple SMC power driver by adding a new MFD cell
Atmel HLCDC:
- Fetch the LVDS PLL clock as a fallback if the generic sys_clk
is unavailable
Broadcom BCM2835 PM:
- Add support for the BCM2712 power management device
- Introduce a hardware type identifier to distinguish SoC variants
Congatec CGBC, KEMPLD, RSMU, Si476x:
- Fix various kernel-doc warnings and correct struct member names
DLN2:
- Drop redundant USB device references and switch to managed
resource allocations
- Update bare 'unsigned' types to 'unsigned int'
ENE KB3930:
- Use the of_device_is_system_power_controller() wrapper
EZX PCAP:
- Avoid rescheduling after destroying the workqueue by switching
to a device-managed workqueue
- Drop redundant memory allocation error messages
- Return directly instead of using empty goto statements
Freescale i.MX25 TSADC:
- Convert devicetree bindings from TXT to YAML format
Freescale MC13xxx:
- Fix a memory leak in subdevice platform data allocation by
using devm_kmemdup()
Intel LPC ICH:
- Expose a software node for the GPIO controller cell to fix
GPIO lookups
Intel LPSS:
- Add PCI IDs for the Intel Nova Lake-H platform
Maxim MAX77620:
- Convert devicetree bindings from TXT to YAML format
- Document an optional I2C address for the MAX77663 RTC device
Maxim MAX77705:
- Make the max77705_pm_ops variable static to resolve a
sparse warning
MediaTek MT6397:
- Correct the hardware CIDs for the MT6328, MT6331, and MT6332
PMICs to allow proper driver binding
ROHM BD71828:
- Enable system wakeup via the power button
ROHM BD72720:
- Add a new compatible string for the ROHM BD73900 PMIC
SpacemiT P1:
- Drop the deprecated "vin-supply" property from the devicetree
bindings
- Add individual regulator supply properties to match actual
hardware topology
STMicroelectronics STPMIC1:
- Attempt system shutdown a second time to handle transient I2C
communication failures
Viperboard:
- Drop redundant USB device references"
* tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: core: Preserve OF node when ACPI handle is present
mfd: ene-kb3930: Use of_device_is_system_power_controller() wrapper
mfd: intel-lpss: Add Intel Nova Lake-H PCI IDs
dt-bindings: mfd: max77620: Document optional RTC address for MAX77663
dt-bindings: mfd: max77620: Convert to DT schema
mfd: ezx-pcap: Avoid rescheduling after destroying workqueue
mfd: ezx-pcap: Return directly instead of empty gotos
mfd: ezx-pcap: Drop memory allocation error message
mfd: bcm2835-pm: Add BCM2712 PM device support
mfd: bcm2835-pm: Introduce SoC-specific type identifier
dt-bindings: mfd: bd72720: Add ROHM BD73900
mfd: si476x: Fix kernel-doc warnings
mfd: rsmu: Remove a empty kernel-doc line
mfd: kempld: Fix kernel-doc struct member names
mfd: congatec: Fix kernel-doc struct member names
dt-bindings: mfd: Convert fsl-imx25-tsadc.txt to yaml format
mfd: viperboard: Drop redundant device reference
mfd: dln2: Switch to managed resources and fix bare unsigned types
mfd: macsmc: Wire up Apple SMC power driver
mfd: mt6397: Properly fix CID of MT6328, MT6331 and MT6332
...
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support (will cause merge conflicts in
drivers/power/supply/Makefile, but it's a simple fix) These changes
did touch outside of drivers/usb/ but got acks from the relevant
mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
UiYztWABA245P1hO9i+K
=/fxh
-----END PGP SIGNATURE-----
Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
Nothing too thrilling here, but we see lots of driver updates and
bug fixes, including quirk additions and refactoring works, while
there have been little changes in the core functionality.
Here are some highlights:
* Core:
- Add validation for the control API put callback
- Fixes in compress-offload API timestamp handling
- Continued ASoC core API cleanups
* ASoC:
- Add support for bus keepers (for Apple devices in future)
- Enhancements to the SDCA support, including retaskable jacks
- Test improvements for Cirrus Logic drivers
- Lots of fixes for the NXP, nVidia and Qualcomm
- Support for AMD RPL DMIC, Cirrus Logic CS42L43 and CS47L47, nVidia
machines with CPCAP and WM8962
* USB-audio:
- Quirks for Huawei Headset, Focusrite Novation, MV-Silicon,
Studio 1824, Arturia AF16Rig, Hotone Audio, Feaulle Rainbow,
PreSonus AudioBox, Moondrop Ju Jiu, Scarlett 18i20, etc
- Extended mixer volume quirk handling
- UAF and other fixes for us144mkii, 6fire and caiaq drivers
* HD-audio:
- Add quirks or fixes for Acer, Lenovo, HP, ASUS machines
- Fixes & cleanups of GPIO helper code
* Misc:
- Add suspend/resume support for multiple legacy ISA and Apple
drivers
- Further regression fixes for ctxfi driver
-----BEGIN PGP SIGNATURE-----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=wHBs
-----END PGP SIGNATURE-----
Merge tag 'sound-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Nothing too thrilling here, but we see lots of driver updates and bug
fixes, including quirk additions and refactoring works, while there
have been little changes in the core functionality. Here are some
highlights:
Core:
- Add validation for the control API put callback
- Fixes in compress-offload API timestamp handling
- Continued ASoC core API cleanups
ASoC:
- Add support for bus keepers (for Apple devices in future)
- Enhancements to the SDCA support, including retaskable jacks
- Test improvements for Cirrus Logic drivers
- Lots of fixes for the NXP, nVidia and Qualcomm
- Support for AMD RPL DMIC, Cirrus Logic CS42L43 and CS47L47, nVidia
machines with CPCAP and WM8962
USB-audio:
- Quirks for Huawei Headset, Focusrite Novation, MV-Silicon, Studio
1824, Arturia AF16Rig, Hotone Audio, Feaulle Rainbow, PreSonus
AudioBox, Moondrop Ju Jiu, Scarlett 18i20, etc
- Extended mixer volume quirk handling
- UAF and other fixes for us144mkii, 6fire and caiaq drivers
HD-audio:
- Add quirks or fixes for Acer, Lenovo, HP, ASUS machines
- Fixes & cleanups of GPIO helper code
Misc:
- Add suspend/resume support for multiple legacy ISA and Apple
drivers
- Further regression fixes for ctxfi driver"
* tag 'sound-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (359 commits)
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
ALSA: usb-audio: Fix missing error handling for get_min_max*()
ALSA: hda/realtek - fixed speaker no sound update
ALSA: hda/realtek: Add quirk for Acer PT316-51S headset mic
ALSA: usb-audio: Exclude Scarlett 18i20 1st Gen from SKIP_IFACE_SETUP
ALSA: hda/realtek: Add quirk for Legion S7 15IMH
ALSA: hda/realtek: Add quirk for HP Spectre x360 14-ea
ALSA: caiaq: take a reference on the USB device in create_card()
ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
ALSA: sscape: Add suspend and resume support
ALSA: sscape: Cache per-card resources for board reinitialization
ALSA: usb-audio: Do not expose sticky mixers
ALSA: usb-audio: Move volume control resolution check into a function
ALSA: usb-audio: Add error checks against get_min_max*()
ALSA: usb-audio: Add quirk for PreSonus AudioBox USB
ALSA: interwave: guard PM-only restore helpers with CONFIG_PM
ALSA: usb-audio: Evaluate packsize caps at the right place
ALSA: sc6000: Restore board setup across suspend
ALSA: sc6000: Keep the programmed board state in card-private data
ALSA: 6fire: fix use-after-free on disconnect
...
Add register bitmasks for charger function.
In addition split the charger IRQs further such that each bit represents
an IRQ downstream of charger regmap irq chip. In addition populate the
ack_base to offload irq ack to the regmap irq chip framework.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-3-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Power management blocks across the BCM2835 family share a common
base but require variant-specific handling. For instance, the
BCM2712 lacks ASB register space, yet it manages the power domain
for the V3D graphics block.
Add a hardware type identifier to the driver's private data. This
allows the driver to distinguish between SoC models and implement
custom quirks or features as needed.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Co-developed-by: Stanimir Varbanov <svarbanov@suse.de>
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/c4bb218654e91f312a01b419d3d408e5131f7673.1772839224.git.andrea.porta@suse.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add kernel-doc entries for missing fields or correct some typos
in names to eliminate kernel-doc warnings:
Warning: include/linux/mfd/si476x-core.h:156 struct member 'regmap' not
described in 'si476x_core'
Warning: include/linux/mfd/si476x-core.h:156 struct member 'power_state'
not described in 'si476x_core'
Warning: include/linux/mfd/si476x-core.h:156 struct member 'supplies' not
described in 'si476x_core'
Warning: include/linux/mfd/si476x-core.h:156 struct member 'is_alive' not
described in 'si476x_core'
Warning: include/linux/mfd/si476x-core.h:156 struct member 'rds_fifo_depth'
not described in 'si476x_core'
Warning: include/linux/mfd/si476x-core.h:170 function parameter 'core' not
described in 'si476x_core_lock'
Warning: include/linux/mfd/si476x-core.h:179 function parameter 'core' not
described in 'si476x_core_unlock'
Warning: include/linux/mfd/si476x-core.h:259 struct member 'firmware' not
described in 'si476x_func_info'
Warning: include/linux/mfd/si476x-core.h:335 struct member 'rds' not
described in 'si476x_rds_status_report'
I don't know what the 'ble' field is so I didn't add a kernel-doc comment
for it:
Warning: include/linux/mfd/si476x-core.h:335 struct member 'ble' not
described in 'si476x_rds_status_report'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260309214223.749088-5-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
kernel-doc format expects a prototype on the line that immediately
follows the "/**" line, so drop this empty line.
Warning: include/linux/mfd/rsmu.h:21 Cannot find identifier on line: *
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260309214223.749088-4-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Correct the struct member names to avoid kernel-doc warnings:
Warning: include/linux/mfd/kempld.h:114 struct member 'gpio_base' not
described in 'kempld_platform_data'
Warning: include/linux/mfd/kempld.h:114 struct member 'get_hardware_mutex'
not described in 'kempld_platform_data'
Warning: include/linux/mfd/kempld.h:114 struct member
'release_hardware_mutex' not described in 'kempld_platform_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260309214223.749088-3-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Correct the struct member names to avoid kernel-doc warnings:
Warning: include/linux/mfd/cgbc.h:38 struct member 'version' not
described in 'cgbc_device_data'
Warning: ../include/linux/mfd/cgbc.h:38 struct member 'lock' not
described in 'cgbc_device_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260309214223.749088-2-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
CIDs set for MT6328, MT6331 and MT6332 are not appropriate.
Many Android downstream kernels define CID as below,
MT6328:
#define PMIC6328_E1_CID_CODE 0x2810
#define PMIC6328_E2_CID_CODE 0x2820
#define PMIC6328_E3_CID_CODE 0x2830
MT6331/MT6332:
#define PMIC6331_E1_CID_CODE 0x3110
#define PMIC6331_E2_CID_CODE 0x3120
#define PMIC6331_E3_CID_CODE 0x3130
#define PMIC6332_E1_CID_CODE 0x3210
#define PMIC6332_E2_CID_CODE 0x3220
#define PMIC6332_E3_CID_CODE 0x3230
The current configuration incorrectly uses the revision code as the CID.
Therefore, the driver cannot detect the same PMIC of different revisions.
(E1/E2 for MT6328, E1/E3 for MT6331/MT6332)
Based on these, the CID of MT6328, MT6331 and MT6332 should be corrected.
Additionally, the incorrect MT6331/MT6332 CID overlaps with the MT6320's
actual CID:
#define PMIC6320_E1_CID_CODE 0x1020
#define PMIC6320_E2_CID_CODE 0x2020
This causes a conflict in the switch-case statement of mt6397-irq.c,
this prevents adding support for MT6320.
Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260302140045.651727-1-akkun11.open@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
One of the users of this driver - meraki-mx100 - abuses the software
node API by setting up a dummy software node without any logical link to
this GPIO controller and uses the fact that the GPIO core matches the
controller's label against the swnode's name to make the lookup work.
We want to remove this behavior from GPIOLIB in favor of actual matching
of firmware nodes but that would break this user. To facilitate that:
create a software node for the GPIO controller cell and expose its
address in the provided MFD header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260218-meraki-swnodes-v2-1-92c521da241c@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The XLCDC IP supports parallel RGB, MIPI DSI and LVDS Display.
The LCD Generic clock (sys_clk) is used for Parallel RGB and MIPI
displays, while the LVDS PLL clock (lvds_pll_clk) is used for LVDS
displays.Since both the clocks cannot co-exist together in the DT
for a given display, this patch tries sys_clk first (RGB/MIPI),
fallback to lvds_pll_clk (LVDS).
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://patch.msgid.link/20260223101920.284697-2-manikandan.m@microchip.com
Signed-off-by: Lee Jones <lee@kernel.org>
This converts the Arizona driver to use GPIO descriptors
exclusively, deletes the legacy code path an updates the
in-tree user of legacy GPIO.
The GPIO lines for mic detect polarity and headphone ID
detection are made exclusively descriptor-oriented. The
headphone ID detection could actually only be used by
the legacy GPIO code, but I converted it to use a
descriptor if someone would actually need it so we don't
just drop useful code.
The compatible "wlf,hpdet-id-gpio" is not in the device
tree bindings and only intended to be used by software
nodes if any. If someone insists I can try to add a
binding for it, but I doubt there is any real user so
it seems pointless.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-asoc-arizona-v1-1-ecc9a165307c@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a GPIO IRQ chip implementation for the kempld GPIO controller. Of
note is only how the parent IRQ is obtained.
The IRQ for the GPIO controller can be configured in the BIOS, along
with the IRQ for the I2C controller. These IRQ are returned by ACPI
but this information is only usable if both IRQ are configured. When
only one is configured, only one is returned making it impossible to
know which one it is.
Luckily the BIOS will set the configured IRQ in the PLD registers, so
it can be read from there instead, and that also work on platforms
without ACPI.
The vendor driver allowed to override the IRQ using a module
parameters, so there are boards in field which used this parameter
instead of properly configuring the BIOS. This implementation provides
this as well for compatibility.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260311143120.2179347-5-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Introducing CS42L43B codec, a variant of CS42L43 which can be driven by
the same driver.
Changes in CS42L43 driver specific for CS42L43B:
- Decimator 1 and 2 are dedicated to ADC, can't be selected for PDM
- Decimators 3 and 4 are connected to PDM1
- Added Decimator 5 and 6 for PDM2
- Supports SoundWire Clock Gearing
- Updated ROM requiring no patching
- Reduced RAM space
- Each ISRC has 4 decimators now
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260306152829.3130530-4-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- New Support & Features
* Add comprehensive support for the ROHM BD72720 PMIC, including core MFD, regulator, GPIO,
clock gate, RTC, and power-supply drivers.
* Add support for the Rockchip RK801 PMIC, including core MFD and regulator drivers.
* Add support for the ROHM BD73900 PMIC by leveraging existing common drivers.
* Wire up RTC, hwmon, and input sub-devices for the Apple SMC (macsmc) driver.
* Add support for the Delta Networks TN48M switch CPLD via the simple-mfd-i2c driver.
* Add support for the TS133 variant to the QNAP MCU driver.
* Provide support for the sama7d65 XLCD controller in the Atmel HLCDC driver.
* Add backlight sub-device support to the Congatec Board Controller (cgbc).
* Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver.
- Improvements & Fixes
* Implement a "wrapper regmap" for the ROHM BD72720 to handle dual I2C slave addresses (0x4b and
0x4c) transparently for child devices.
* Introduce mutex locking around 'mfd_of_node_list' in the MFD core to ensure safe concurrent
access.
* Fix a potential regulator resource leak in the Arizona core driver during boot sequence
failures.
* Resolve child device duplication issues on driver rebind for Qualcomm PM8xxx and OMAP USB host
drivers by using of_platform_depopulate().
* Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a unique domain suffix.
* Implement LOCK register handling for the TI TPS65214 variant to unlock registers at probe
time.
* Fully convert the Loongson-2K BMC driver to use managed resources (pcim) and the standard PCI
resource API.
* Ensure the Apple SMC mutex is correctly initialized during probe to prevent NULL pointer
dereferences.
* Expand the ROHM BD71828 power-supply driver to support 9-bit register addresses.
* Simplify the Samsung S5M RTC driver by querying platform device IRQ resources directly.
* Revert an incorrect read-to-write mask change in the DA9052 SPI driver to restore default OTP
behavior.
* Fix kernel-doc warnings in the TI TPS6105x driver.
- Cleanups & Refactoring
* Simplify the MFD core by utilizing the scoped for_each_child_of_node_scoped() macro and
streamlining device_node storage.
* Rename ROHM BD71828 IC-specific entities to use consistent prefixes for better extensibility.
* Refactor ROHM BD71828 regmap definitions using the regmap_reg_range() macro.
* Update the ROHM BD71828 driver to use standard C-style comment headers.
* Remove the now unused 'irq_data' field from the Samsung SEC core structure.
* Drop unnecessary use of irqd_get_trigger_type() in the Maxim MAX77759 driver.
* Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected.
* Add missing charger-related registers to the ROHM BD71828 core header and Type-C CC registers
to the AXP717.
- Device Tree Binding Updates
* Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC, Bitmain BM1880 System
Controller, and NXP LPC32xx System Control Block.
* Clarify trickle-charge terminology and add properties for voltage drop (VDR) correction and
upper charge limits to the generic battery binding.
* Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for Aspeed SCU.
* Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102, pmh0101, pmk8850, etc.).
* Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom (Microchip), and various
MediaTek SCPSYS and regulator components.
* Fix a dead link to the audio codec binding in the DA9055 documentation.
-----BEGIN PGP SIGNATURE-----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=BxGL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a single
real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use devres
consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio driver
along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x and
add more models to the list of supported variants
-----BEGIN PGP SIGNATURE-----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=Zhuy
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration with
the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow systems
with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmJ8RMACgkQJNaLcl1U
h9D42Af/Xw+osom1EXqU1IDuxuKQXKE9GXvHJ+OV2uWaPJE8qy5q1ZNJ38HyMBRW
cuFxfPlUJA/xR47WSvK7LVkHutZVMBIohkhahueP218fDVoQmlxSChcbM8VBzoHW
NJ3TY+rzhHN5O7r00rPfUuxdQwjkGha122xGsxmzzfXUYpKOZ1jxSInR8BibIAc/
0fmz61OAgpgBXMX+dTZvD8usVW4vzCvaYWX0CfdaViDuz72kZn8I1iFWzxQEDS7W
/KGq7WLkyG5x2wzZ6kySKjeq4nWKR1lURMU0KJ6bjW9U/RN3PCpZREJjWNLlUUGJ
ApltpBz5fXJ+tt6/IonwVL6YwjRXpw==
=vcqU
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
The S2MPG10 PMIC is a Power Management IC for mobile applications with
buck converters, various LDOs, power meters, RTC, clock outputs, and
additional GPIO interfaces.
It has 10 buck and 31 LDO rails. Several of these can either be
controlled via software (register writes) or via external signals, in
particular by:
* one out of several input pins connected to a main processor's:
* GPIO pins
* other pins that are e.g. firmware- or power-domain-controlled
without explicit driver intervention
* a combination of input pins and register writes.
Control via input pins allows PMIC rails to be controlled by firmware,
e.g. during standby/suspend, or as part of power domain handling where
otherwise that would not be possible. Additionally toggling a pin is
faster than register writes, and it also allows the PMIC to ensure that
any necessary timing requirements between rails are respected
automatically if multiple rails are to be enabled or disabled quasi
simultaneously.
This commit implements support for all these rails and control
combinations.
Additional data needs to be stored for each regulator, e.g. the input
pin for external control, or a rail-specific ramp-rate for when
enabling a buck-rail. Therefore, probe() is updated slightly to make
that possible.
Note1: For an externally controlled rail, the regulator_ops provide an
empty ::enable() and no ::disable() implementations, even though Linux
can not enable the rail and one might think ::enable could be NULL.
Without ops->enable(), the regulator core will assume enabling such a
rail failed, though, and in turn never add a reference to its parent
(supplier) rail. Once a different (Linux-controlled) sibling (consumer)
rail on that same parent rail gets disabled, the parent gets disabled
(cutting power to the externally controlled rail although it should
stay on), and the system will misbehave.
Note2: While external control via input pins appears to exist on other
versions of this PMIC, there is more flexibility in this version, in
particular there is a selection of input pins to choose from for each
rail (which must therefore be configured accordingly if in use),
whereas other versions don't have this flexibility.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-16-3b1f9831fffd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Samsung's S2MPG11 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, NTC thermistor inputs, and additional GPIO interfaces. It
typically complements an S2MPG10 PMIC in a main/sub configuration as
the sub-PMIC.
Like S2MPG10, communication is not via I2C, but via the Samsung ACPM
firmware.
While at it, we can also switch to asynchronous probe, which helps with
probe performance, as the drivers for s2mpg10 and s2mpg11 can probe in
parallel.
Note: The firmware uses the ACPM channel ID and the Speedy channel ID
to select the PMIC address. Since these are firmware properties, they
can not be retrieved from DT, but instead are deducted from the
compatible for now.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-9-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Bucks can reasonably be supplies for LDOs, but not the other way
around. Since rail registration is going to be ordered by 'enum
s2mpg10_regulators', it makes sense to specify bucks first, so that
during LDO registration it is more likely that the corresponding supply
is known already.
This can improve probe speed, as no unnecessary deferrals and retries
are required anymore.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-8-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Mark explained that this should not happen with this hardware since it
is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will
refuse to accept such a handler.
Set IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 1c6c69525b ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de
The AXP717 has some extra registers related to type-C CC pin
negotiation. They were missing from the original submission.
Add them for completeness.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251225080241.3153453-1-wens@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The TPS65214 PMIC variant has a LOCK_REG register that prevents writes to
nearly all registers when locked. Unlock the registers at probe time and
leave them unlocked permanently.
This approach is justified because:
- Register locking is very uncommon in typical system operation
- No code path is expected to lock the registers during runtime
- Adding a custom regmap write function would add overhead to every
register write, including voltage changes triggered by CPU OPP
transitions from the cpufreq governor which could happen quite
frequently
Cc: stable@vger.kernel.org
Fixes: 7947219ab1 ("mfd: tps65219: Add support for TI TPS65214 PMIC")
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251218-fix_tps65219-v5-1-8bb511417f3a@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
As there are some registers missing which are required for future charger
extensions, add them.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20251207085024.7375-1-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
Fix spelling of an enum to fix a kernel-doc warning.
Fix kernel-doc of struct tps6105x to prevent kernel-doc warnings.
Warning: include/linux/mfd/tps6105x.h:68 Enum value 'TPS6105X_MODE_TORCH'
not described in enum 'tps6105x_mode'
Warning: include/linux/mfd/tps6105x.h:68 Excess enum value
'%TPS61905X_MODE_TORCH' description in 'tps6105x_mode'
Warning: include/linux/mfd/tps6105x.h:93 struct member 'pdata'
not described in 'tps6105x'
Warning: include/linux/mfd/tps6105x.h:93 struct member 'client'
not described in 'tps6105x'
Fixes: 798a8eee44 ("mfd: Add a core driver for TI TPS61050/TPS61052 chips v2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251125022750.3165569-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
This was used only to allow the s5m RTC driver to deal with the alarm
IRQ. That driver now uses a different approach to acquire that IRQ, and
::irq_data doesn't need to be kept around anymore.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260113-s5m-alarm-v3-3-855a19db1277@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The RK801 is a Power Management IC (PMIC) for multimedia
and handheld devices. It contains the following components:
- 4 BUCK
- 2 LDO
- 1 SWITCH
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Link: https://patch.msgid.link/20260112124351.17707-3-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD72720 is a power management IC which continues the BD71828
family of PMICs. Similarly to the BD71815 and BD71828, the BD72720
integrates regulators, charger, RTC, clock gate and GPIOs.
The main difference to the earlier PMICs is that the BD72720 has two
different I2C slave addresses. In addition to the registers behind the
'main I2C address', most of the charger (and to some extent LED) control
is done via registers behind a 'secondary I2C slave address', 0x4c.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/c7b3f1b25616a0add21cea38019e50a89873b6ac.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
On S2MPG10 (and similar like S2MPG11), top-level interrupt status and
mask registers exist which need to be unmasked to get the PMIC
interrupts. This additional status doesn't seem to exist on other PMICs
in the S2MP* family, and the S2MPG10 driver is manually dealing with
masking and unmasking currently.
The correct approach here is to register this hierarchy as chained
interrupts, though, without any additional manual steps. Doing so will
also simplify addition of other, similar, PMICs (like S2MPG11) in the
future.
Update the driver to do just that.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251114-s2mpg10-chained-irq-v1-1-34ddfa49c4cd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The wl1273 FM radio is on Arnd's unused driver list:
https://lore.kernel.org/lkml/a15bb180-401d-49ad-a212-0c81d613fbc8@app.fastmail.com/
Other patches have removed the core, the ASoC code and the Radio code.
With all those in, remove the header.
Also, tidy the ref in the docs.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Mark the write buffer arguments in apple_smc_write(), apple_smc_rw(),
and apple_smc_write_atomic() as const. These functions do not modify
the data provided by the caller, so the parameters should be const
qualified.
Signed-off-by: Atharva Tiwari <atharvatiwarilinuxdev@gmail.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
When using the _SMC_KEY macro in switch/case statements, GCC 15.2.1 errors
out with 'case label does not reduce to an integer constant'. Introduce
a new __SMC_KEY macro that can be used instead.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20251025-macsmc-subdevs-v4-5-374d5c9eba0e@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
There are 3 sub-devices for which the drivers will be added in
subsequent patches.
Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-2-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>
Here is the big set of char/misc/iio and other driver subsystem changes
for 6.18-rc1. Loads of different stuff in here, it was a busy
development cycle in lots of different subsystems, with over 27k new
lines added to the tree. Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor
updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust. This is the big one, and
was driving a huge majority of the rust binding work over the past
years. Right now there are 2 binder drivers in the kernel, selected
only at build time as to which one to use as binder wants to be
included in the system at boot time. The binder C maintainers all
agreed on this, as eventually, they want the C code to be removed from
the tree, but it will take a few releases to get there while both
are maintained to ensure that the rust implementation is fully
stable and compliant with the existing userspace apis.
All of these have been in linux-next for a while, with only minor merge
issues showing up (you will hit them as well.) Just accept both sides
of the merge, it's just some header and include file lines, nothing
major.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
macHNv5/SjpAh7H5ssBU
=cjWS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
The only machine that still uses the old gpio number based interface
is the wlf_cragg_6410 board file. In order to remove the dependency
on the interfaces, add #ifdef blocks here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-13-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Relying on other components to include those basic types is unreliable
and may cause compile errors like:
../include/linux/mfd/qnap-mcu.h:13:9: error: unknown type name ‘u32’
13 | u32 baud_rate;
| ^~~
../include/linux/mfd/qnap-mcu.h:17:9: error: unknown type name ‘bool’
17 | bool usb_led;
| ^~~~
So make sure, the types used in the header are available.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Nuvoton NCT6694 provides an USB interface to the host to
access its features.
Sub-devices can use the USB functions nct6694_read_msg() and
nct6694_write_msg() to issue a command. They can also request
interrupt that will be called when the USB device receives its
interrupt pipe.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Marvell's 88PM886 PMIC has a so-called General Purpose ADC used for
monitoring various system voltages and temperatures. Add the relevant
register definitions to the MFD header and a driver for the ADC.
Acked-by: Karel Balej <balejk@matfyz.cz> # for the PMIC
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
Loongson Security Engine chip supports RNG, SM2, SM3 and SM4 accelerator
engines. This is the base driver for other specific engine drivers.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250705072045.1067-2-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
- New Support & Features
* Add extensive support for the Analog Devices ADP5589 I/O expander, including
core MFD, GPIO, PWM, and a new keypad matrix input driver. This also adds
support for handling various events including GPI, keypad, reset and unlock
ev ents.
* Add support for the TI TPS652G1 PMIC, a stripped-down version of the TPS65224,
including core MFD, PFSM, pinctrl, and GPIO support.
* Add support for the Apple Silicon System Management Controller (SMC), including
the core MFD driver which handles the RTKit-based protocol, a new GPIO driver
for PMU GPIOs, and a new reboot/power-off driver.
- Improvements & Fixes
* Dynamically add ADP5585 sub-devices based on device tree properties.
* Move ADP5585 oscillator control from the child PWM driver to the main MFD
driver to better handle shared resources.
* Add support for a hardware reset pin and VDD regulator to the ADP5585 driver.
* Update the TPS65219 MFD cell's GPIO compatible string for the TPS65214 to
reflect hardware capabilities correctly.
* Separate the ChromeOS EC charge-control probing from the USB-PD subsystem,
allowing it to probe independently based on the dedicated EC_FEATURE_CHARGER.
* Fix an interrupt naming typo in the MT6370 driver.
* Fix RK806 PMIC reset behavior by allowing the reset mode to be customized via a
new device tree property.
* Fix AXP20X regulator cell ID conflicts for secondary PMICs on boards without an
IRQ line connected.
* Fix MT6397 keypad sub-device creation to use specific names instead of a
generic one, ensuring correct driver binding.
* Fix a build warning in the stm32-timers driver by adding a missing include for
export.h.
- Cleanups & Refactoring
* Refactor the ADP5585 driver to simplify how regmap defaults are handled, making
it easier to add new chip variants.
* Introduce per-chip register map structures for the ADP5585/ADP5589 family to
handle differences between the devices.
* Convert several drivers to use dev_fwnode() instead of of_fwnode_handle().
* Make various static structures const in the cs40l50, rohm-bd71828, tps65219,
and twl6040 drivers.
* Remove redundant pm_runtime_mark_last_busy() calls from several drivers.
* Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers.
* Remove unused fields from the 'tps65219' struct.
* Update several MFD-related headers to follow the 'Include What You Use' (IWYU)
principle.
- Removals
* Remove the old, platform-data-based adp5589-keys input driver, which is now
superseded by the new MFD-based adp5585-keys driver.
* Remove the unused twl6030_mmc_card_detect() functions and associated header
declarations.
* Remove the now unused pcf50633/core.h header file.
* Remove the fsl,imx8qxp-csr device tree binding, which was being used
incorrectly.
- Device Tree Bindings Updates
* Add support for the Analog Devices ADP5589 I/O expander to the adi,adp5585.yaml
binding.
* Add new properties to the adi,adp5585.yaml binding for input events, including
keypad pins, unlock events, and reset events.
* Add a reset-gpios property to the adi,adp5585.yaml binding.
* Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding.
* Add new bindings for the Apple Mac System Management Controller (SMC) and its
sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and apple,smc-reboot.yaml.
* Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema format.
* Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY bindings into
a single YAML schema file.
* Convert the TI TPS65910 binding to YAML schema format.
* Add a comment to the samsung,s2mps11.yaml binding to clarify the use of 'oneOf'
for interrupt properties.
* Add the rockchip,reset-mode property to the rockchip,rk806.yaml binding to
allow customization of the PMIC's reset behavior.
-----BEGIN PGP SIGNATURE-----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=YYgL
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add extensive support for the Analog Devices ADP5589 I/O expander,
including core MFD, GPIO, PWM, and a new keypad matrix input
driver. This also adds support for handling various events
including GPI, keypad, reset and unlock ev ents
- Add support for the TI TPS652G1 PMIC, a stripped-down version of
the TPS65224, including core MFD, PFSM, pinctrl, and GPIO support
- Add support for the Apple Silicon System Management Controller
(SMC), including the core MFD driver which handles the RTKit-based
protocol, a new GPIO driver for PMU GPIOs, and a new
reboot/power-off driver.
Improvements & Fixes:
- Dynamically add ADP5585 sub-devices based on device tree properties
- Move ADP5585 oscillator control from the child PWM driver to the
main MFD driver to better handle shared resources
- Add support for a hardware reset pin and VDD regulator to the
ADP5585 driver
- Update the TPS65219 MFD cell's GPIO compatible string for the
TPS65214 to reflect hardware capabilities correctly
- Separate the ChromeOS EC charge-control probing from the USB-PD
subsystem, allowing it to probe independently based on the
dedicated EC_FEATURE_CHARGER
- Fix an interrupt naming typo in the MT6370 driver
- Fix RK806 PMIC reset behavior by allowing the reset mode to be
customized via a new device tree property
- Fix AXP20X regulator cell ID conflicts for secondary PMICs on
boards without an IRQ line connected
- Fix MT6397 keypad sub-device creation to use specific names instead
of a generic one, ensuring correct driver binding
- Fix a build warning in the stm32-timers driver by adding a missing
include for export.h.
Cleanups & Refactoring:
- Refactor the ADP5585 driver to simplify how regmap defaults are
handled, making it easier to add new chip variants
- Introduce per-chip register map structures for the ADP5585/ADP5589
family to handle differences between the devices
- Convert several drivers to use dev_fwnode() instead of
of_fwnode_handle()
- Make various static structures const in the cs40l50, rohm-bd71828,
tps65219, and twl6040 drivers
- Remove redundant pm_runtime_mark_last_busy() calls from several
drivers
- Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers
- Remove unused fields from the 'tps65219' struct
- Update several MFD-related headers to follow the 'Include What You
Use' (IWYU) principle.
Removals:
- Remove the old, platform-data-based adp5589-keys input driver,
which is now superseded by the new MFD-based adp5585-keys driver
- Remove the unused twl6030_mmc_card_detect() functions and
associated header declarations
- Remove the now unused pcf50633/core.h header file
- Remove the fsl,imx8qxp-csr device tree binding, which was being
used incorrectly.
Device Tree Bindings Updates:
- Add support for the Analog Devices ADP5589 I/O expander to the
adi,adp5585.yaml binding
- Add new properties to the adi,adp5585.yaml binding for input
events, including keypad pins, unlock events, and reset events
- Add a reset-gpios property to the adi,adp5585.yaml binding
- Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding
- Add new bindings for the Apple Mac System Management Controller
(SMC) and its sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and
apple,smc-reboot.yaml
- Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema
format
- Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY
bindings into a single YAML schema file
- Convert the TI TPS65910 binding to YAML schema format
- Add a comment to the samsung,s2mps11.yaml binding to clarify the
use of 'oneOf' for interrupt properties
- Add the rockchip,reset-mode property to the rockchip,rk806.yaml
binding to allow customization of the PMIC's reset behavior"
* tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
mfd: dt-bindings: Convert TPS65910 to DT schema
mfd: Minor Cirrus/Maxim Kconfig order fixes
mfd: Remove redundant pm_runtime_mark_last_busy() calls
mfd: mt6397: Do not use generic name for keypad sub-devices
mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is present
mfd: mt6370: Fix the interrupt naming typo
mfd: rk8xx-core: Allow to customize RK806 reset mode
dt-bindings: mfd: rk806: Allow to customize PMIC reset mode
mfd: syscon: atmel-smc: Don't use "proxy" headers
mfd: madera: Don't use "proxy" headers
mfd: wm8350-core: Don't use "proxy" headers
dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts properties
mfd: davinci_voicecodec: Don't use "proxy" headers
mfd: pcf50633: Remove the header file core.h
mfd: tps65219: Remove another unused field from 'struct tps65219'
mfd: tps65219: Remove an unused field from 'struct tps65219'
mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_data
mfd: rohm-bd71828: Constify some structures
dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentation
mfd: axp20x: Set explicit ID for AXP313 regulator
...
The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the vast
majority of consumers. Otherwise it's been quite quiet, a few new
devices supported, plus some cleanups and fixes.
- Basic Rust bindings.
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we just
got as close as we could in one step.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Mode setting support for PCA9450.
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1.
The TI driver pulls in the MFD portion of the support for the device and
the pinctrl driver which was in the same tag.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHaHcACgkQJNaLcl1U
h9Dw7Af9HSpY+r/dZzBN1wGky4Yd40tRKP5u5HzHc9T+gG8716wr/KE4SrMIWHax
8SIiKZDC/Bu2kj3D4xaJrb6a8M0AIpRS3IwAbLWqkJ9jPF2082tp+GwbJqI045Ix
ZAWJVUEYQyJ3wwyD0ZG/peCAGvKBgCCn0NGn7KUnAk9QrsiTq8GqDgZPWcKRzXPV
t9twib6J/NAL6I8PKfXnuQNwA9Td79SBySKRY4UgceQtUJgzyBo8UbqMrBuZOY7j
FvxfkYSryDDdEpRMRsczYk+jYjwQVzIa8g4B1C9EF2g5pvWg61PXNX+G2qDkeUbL
XR1gloyJExnlyAXoVY2bg+cSzd2ffQ==
=GAr4
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
Linus Torvalds